Search

This paper presents the ESA Voyage 2050 White Paper for a concept of TeraHertz Exploration and Zooming-in for Astrophysics (THEZA). It addresses the science case and some implementation issues of a space-borne radio interferometric system for ultra-sharp imaging of celestial radio sources at the level of angular resolution down to (sub-) microarcseconds. THEZA focuses at millimetre and sub-millimetre wavelengths (frequencies above ∼ 300 GHz), but allows for science operations at longer wavelengths too. The THEZA concept science rationale is focused on the physics of spacetime in the vicinity of supermassive black holes as the leading science driver. The main aim of the concept is to facilitate a major leap by providing researchers with orders of magnitude improvements in the resolution and dynamic range in direct imaging studies of the most exotic objects in the Universe, black holes. The concept will open up a sizeable range of hitherto unreachable parameters of observational astrophysics. It unifies two major lines of development of space-borne radio astronomy of the past decades: Space VLBI (Very Long Baseline Interferometry) and mm- and sub-mm astrophysical studies with "single dish" instruments. It also builds upon the recent success of the Earth-based Event Horizon Telescope (EHT) – the first-ever direct image of a shadow of the super-massive black hole in the centre of the galaxy M87. As an amalgam of these three major areas of modern observational astrophysics, THEZA aims at facilitating a breakthrough in high-resolution high image quality studies in the millimetre and sub-millimetre domain of the electromagnetic spectrum. [ABSTRACT FROM AUTHOR]

The use of computers and the role of women in radio astronomy and X-ray crystallography research at the Cavendish Laboratory between 1949 and 1975 have been investigated. We recorded examples of when computers were used, what they were used for and who used them from hundreds of papers published during these years. The use of the EDSAC, EDSAC 2 and TITAN computers was found to increase considerably over this time-scale and they were used for a diverse range of applications. The majority of references to computer operators and programmers referred to women, 57% for astronomy and 62% for crystallography, in contrast to a very small proportion, 4% and 13% respectively, of female authors of papers. [ABSTRACT FROM AUTHOR]

This paper proposes a heterogeneous real-time baseband astronomical backend solution centered on RFSoC and combined GPU. The solution implemented the integration of the high-performance, completely configurable RF signal link to digitize, process, and transmit increasingly massive radio astronomy signals and provided a highly flexible and scalable scheme for the QTT backend. The RFSoC-based integration RF pre-processing front-end directly digitizes dual-polarization signals at the sampling rate of 2048 MHz and converts them to dual-16-channel data streams for parallel mixing and polyphase decimation filtering. The generated baseband data with 256 MHz center frequency and 100 MHz bandwidth is packaged and output to the GPU server through the 100GbE Interface. Complete processes of direct RF sampling, pre-processing, and high-speed transmission are implemented at the receiver. The GPU server executes real-time post-processing at the remote end. The dynamic configuration of two observation modes can be achieved with frequency resolutions of 3.051 and 0.763 kHz. The H2CO absorption line observations with the Nanshan 26-m radio telescope verified the system's performance and the design's rationality. This paper explores and confirms the RFSoC's applicability on the backend. The flexible and efficient QTT backend scheme was planned based on the proposed real-time baseband pattern by expanding multi-RFSoC and GPU computing nodes. [ABSTRACT FROM AUTHOR]

The digital correlator is one of the most crucial data processing components of a radio telescope array. With the scale of radio interferometeric array growing, many efforts have been devoted to developing a cost-effective and scalable correlator in the field of radio astronomy. In this paper, a 192-input digital correlator with six CASPER ROACH2 boards and seven GPU servers has been deployed as the digital signal processing system for Tianlai cylinder pathfinder located in Hongliuxia observatory. The correlator consists of 192 input signals (96 dual-polarization), 125-MHz bandwidth, and full-Stokes output. The correlator inherits the advantages of the CASPER system, for example, low cost, high performance, modular scalability, and a heterogeneous computing architecture. With a rapidly deployable ROACH2 digital sampling system, a commercially expandable 10 Gigabit switching network system, and a flexible upgradable GPU computing system, the correlator forms a low-cost and easilyupgradable system, poised to support scalable large-scale interferometeric array in the future. [ABSTRACT FROM AUTHOR]

Jan Hendrik Oort is recognized as one of the greatest astronomers of the 20th century. His 225 publications that appeared during 1922-1992 are analyzed. Most of the papers of the scientist (N= 170) are non-collaborative. Oort's first paper was published in 1922 at the age of 23. The period 1957-1961, when Oort was 58-62 years old, was his most productive period (nearly 5 papers per year). From the period of 7th to 13th quinquennium (age 53-87) he produced nearly 4 to 5 papers per year. In the byline of authors his status ranged from first to third and ninth. Oort's research team comprised of 67 collaborators. C. A. Muller and G.W. Rougoor were his leading collaborators. Most of his papers were published in journals, mostly emanating from Netherlands (N=71), USA (N=55) and UK (27) etc. The publication concentration is 2.27 and publication density 16.16. The most frequent keywords are Galaxy(ies) (N=23), Galactic System (N=17) and Structure (N=17). Finally, it is seen that the data set does not follow Bradford law. [ABSTRACT FROM AUTHOR]

The 230 GHz lightcurves of Sagittarius A* (Sgr A*) predicted by general relativistic magnetohydrodynamics and general relativistic ray-tracing (GRRT) models by the Event Horizon Telescope Collaboration have higher variability M Δ T compared to observations. In this series of papers, we explore the origin of such large brightness variability. In this first paper, we performed large GRRT parameter surveys that span from the optically thin to the optically thick regimes, covering the ion-to-electron temperature ratio under strongly magnetized conditions, R Low, from 1 to 60. We find that increasing R Low can lead to either an increase or a reduction in M Δ T depending on the other model parameters, making it consistent with the observed variability of Sgr A* in some cases. Our analysis of GRRT image snapshots finds that the major contribution to the large M Δ T for the R Low = 1 models comes from the photon ring. However, secondary contributions from the accretion flow are also visible depending on the spin parameter. Our work demonstrates the importance of the electron temperature used for modeling radiatively inefficient accretion flows and places new constraints on the ion-to-electron temperature ratio. A more in-depth analysis for understanding the dependencies of M Δ T on R Low will be performed in subsequent papers. [ABSTRACT FROM AUTHOR]

Counting papers and citations is one way to estimate the significance of particular astronomical telescopes and other facilities in the long time gap between the verdict of history and the referee’s report on your most recent proposal. This has been done for 2,184 observational astronomy papers published between 1960 and 1964 (with 14,237 citations in 1965–1969) and the numbers looked at in various ways. The extreme dominance of California in optical astronomy and of the UK and Australia in radio astronomy provides the background against which ESO, NOAO, NRAO, and A&A were founded, with equality of access to facilities having increased enormously in the intervening 40 years, but inequality of results having increased slightly. A number of other factoids about astronomical publications, the community, and their environments surfaced during the counting process, and a subset reported here, including a few pertaining to the more distant past. [ABSTRACT FROM AUTHOR]

A broadband differential-MMIC low-noise amplifier (DLNA) using metamorphic high-electron-mobility transistors of 70 nm in Gallium Arsenide (70 nm GaAs mHEMT technology) is presented. The design and results of the performance measurements of the DLNA in the frequency band from 1 to 16 GHz are shown, with a high dynamic range, and a noise figure ( N F ) below 1.3 dB is obtained. In this work, two low-noise amplifiers (LNAs) were designed and manufactured in the OMMIC foundry: a dual LNA, which we call balanced, and a differential LNA, which we call DLNA. However, the paper focuses primarily on DLNA because of its differential architecture. Both use a 70 nm GaAs mHEMT space-qualified technology with a cutoff frequency of 300 GHz. With a low power bias V b i a s / I b i a s (5 V/40.5 mA), N F < 1.07 dB "on wafer" was achieved, from 2 to 16 GHz; while with the measurements made "on jig", N F = 1.1 dB, from 1 to 10 GHz. Furthermore, it was obtained that N F < 1.5 dB, from 1 to 16 GHz, with a figure of merit equal to 145.5 GHz/mW. Finally, with the proposed topology, several LNAs were designed and manufactured, both in the OMMIC process and in other foundries with other processes, such as UMS. The experimental results showed that the N F of the DLNA MMIC with multioctave bandwidth that was built in the frequency range of the L-, S-, C-, and X-bands was satisfactory. [ABSTRACT FROM AUTHOR]

The paper presents results of calculating the RATAN-600 beam pattern (BP) and BP drift scans of point radio sources in the West Sector radio telescope operation mode at a frequency of 4.7 GHz. When calculating the BP, the properties of the radio telescope antenna system in this operation mode were taken into account: the use of a large secondary mirror, asymmetric radiation of the primary mirror, and the location of the primary feeds (feed horns) along the focal line of the secondary mirror. The shape of the calculated drift scans of sources through the BP is compared with that of the experimental drift scans of sources obtained from observations in the West Sector. The main characteristics of the drift scans are calculated and compared when the radio telescope operates with the West and North Sectors. A new method for determination of flux densities of sources passing through the BP outside its central cross-section is proposed, and its accuracy is estimated. [ABSTRACT FROM AUTHOR]

The estimation of the direction of electromagnetic (EM) waves from a radio source using electrically short antennas is one of the challenging problems in the field of radio astronomy. In this paper we have developed an algorithm which performs better in direction and polarization estimations than the existing algorithms. Our proposed algorithm Snapshot Averaged Matrix Pencil Method (SAM) is a modification to the existing Matrix Pencil Method (MPM) based Direction of Arrival (DoA) algorithm. In general, MPM estimates DoA of the incoherent EM waves in the spectra using unitary transformations and least square method (LSM). Our proposed SAM modification is made in context to the proposed Space Electric and Magnetic Sensor (SEAMS) mission to study the radio universe below 16 MHz. SAM introduces a snapshot averaging method to improve the incoherent frequency estimation thereby improving the accuracy of DoA estimation. It can also detect polarization to differentiate between Right Hand Circular Polarlization (RHCP), Right Hand Elliptical Polarlization (RHEP), Left Hand Circular Polarlization (LHCP), Left Hand Elliptical Polarlization (LHEP) and Linear Polarlization (LP). This paper discusses the formalism of SAM and shows the initial results of a scaled version of a DoA experiment at a resonant frequency of ∼ 72 MHz. [ABSTRACT FROM AUTHOR]

The Square Kilometre Array (SKA) is the world's largest radio telescope currently under construction, and will employ elaborate signal processing to detect new pulsars, i.e. highly magnetised rotating neutron stars. This paper addresses the acceleration of demanding computations for this pulsar search on Field-Programmable Gate Arrays (FPGAs) using a new high-level design process based on OpenCL templates that is transferable to other scientific problems. The successful FPGA acceleration of large-scale scientific workloads requires custom architectures that fully exploit the parallel computing capabilities of modern reconfigurable hardware and are amenable to substantial design space exploration. OpenCL-based high-level synthesis toolchains, with their ability to express interconnected multi-kernel pipelines in a single source language, excel in this domain. However, the achievable performance strongly depends on how well the compiler can infer desirable hardware structures from the code. One key aspect to excellent performance is commonly the uninterrupted, high-bandwidth streaming of data into and through the design. This is difficult to achieve in complex designs when data order needs to be re-arranged, e.g. transposed. It is equally hard to pre-fetch and burst-load from DDR memory when reading occurs in non-trivial patterns. In this paper, we propose new approaches to these two problems that use OpenCL-based code templates. We demonstrate the practical benefits of these approaches with the acceleration of a key component in the SKA's pulsar search pipeline: the Fourier Domain Acceleration Search (FDAS) module. Using our proposed methodology, we are able to develop a more scalable FDAS accelerator architecture than previously possible. We explore its design space to eventually achieve a 10x throughput improvement over a prior, thoroughly optimised implementation in plain OpenCL. [ABSTRACT FROM AUTHOR]

Describes the above-named upcoming conference event. May include topics to be covered or calls for papers. [ABSTRACT FROM AUTHOR]

Interferometry applications (e.g., radio astronomy) often wish to optimize the placement of the interferometric elements. One such optimal criterion is a uniform distribution of non‐redundant element spacings (in both distance and position angle). While large systems, with many elements, can rely on saturating the sample space, and disregard "wasted" sampling, small arrays with only a few elements are more critical, where a single element can represent a significant fraction of the overall cost. This paper defines a "perfect array" as a mathematical construct having uniform and complete element spacings within a circle of radius equal to the maximum element spacing. Additionally, the largest perfect non‐redundant array, comprising six elements, is presented. The geometry is described, along with the properties of the layout and situations where it would be of significant benefit to array application and non‐redundant masking designs. Plain Language Summary: An interferometer combines an array of separate elements (e.g., radio antennas or optical apertures) to receive electromagnetic waves. The position of these elements relative to each other will affect the quality of the resultant combined measurement. This paper defines a "perfect non‐redundant" array as one where the different relative positions have been chosen to give the best possible result, without any unnecessary duplication. This optimization improves the efficiency, and reduces the size and cost, of such an interferometer design. This paper reports on the largest such array—the Manx array. Key Points: A "perfect array" is a mathematical construct with uniform and complete element spacings to a circle of radius up to the maximum uv‐distanceThe Manx array represents the configuration of the largest perfect arrayFractal replication of the Manx array results in uv‐efficient layouts [ABSTRACT FROM AUTHOR]

In this paper, a wideband Vivaldi phased array with double band-notched performance for radio astronomy is proposed. To address the issues of radio frequency interference from 5 G mobile communication (4.8–5 GHz) and C-band satellite communication (5.9–6.5 GHz) in radio astronomy system, the hairpin ring resonator (HRR), defected ground structure and λ/2 shorted-circuit stub are utilized together to realize the double notched bands with different bandwidth. The resonate mechanism of the proposed HRR is widely investigated, which exhibits independent and controllable resonances. Meanwhile, λ/2 shorted-circuited stub is adopted for the band notched performance. As the current on the stub is induced along the shorted via to the ground, without participating in radiation, thus the notched frequency is not affected by the scan angle. With these novel and dedicated design, the proposed phased array performs double band-notched performance with high skirt selectivity and deep suppression, within the notched band the maximum rejection level is better than 22.7 dB. This is the first work to implement double notched bands in phased array to the authors' best knowledge. Finally, a prototype composed of 8 × 9 elements is fabricated and measured. The measurements agree well with the simulated ones. [ABSTRACT FROM AUTHOR]

In 2019, the Event Horizon Telescope (EHT) released the first-ever image of a black hole event horizon. Astronomers are now aiming for higher angular resolutions of distant targets, like black holes, to understand more about the fundamental laws of gravity that govern our universe. To achieve this higher resolution and increased sensitivity, larger radio telescopes are needed to operate at higher frequencies and in larger quantities. Projects like the next-generation Very Large Array (ngVLA) and the Square-Kilometer Array (SKA) require building hundreds of telescopes with diameters greater than 10 ms over the next decade. This has a twofold effect. Radio telescope surfaces need to be more accurate to operate at higher frequencies, and the logistics involved in maintaining a radio telescope need to be simplified to support them properly in large quantities. Both of these problems can be solved with improved methods for surface metrology that are faster and more accurate with a higher resolution. This leads to faster and more accurate panel alignment and, therefore, a more productive observatory. In this paper, we present the use of binocular fringe projection profilometry as a solution to this problem and demonstrate it by aligning two panels on a 3-m radio telescope dish. The measurement takes only 10 min and directly delivers feedback on the tip, tilt, and piston of each panel to create the ideal reflector shape. Highlights: Current methods for measuring and aligning radio telescope dishes are insufficient for future astronomy requirements. We've developed a 3D scanning method for measuring full aperture dishes outdoors that is faster, easier, and more reliable than current methods. We demonstrated the method by aligning two panels on a 3-m dish to a high accuracy. [ABSTRACT FROM AUTHOR]

After years of preparation, the Indonesia National Observatory, located in Mount Timau, Kupang Regency, is currently in the completion stage of research in astronomy and astrophysics and related subjects. An optic telescope with a 3.8 m diameter is expected to receive its first light in mid-2024. A feasibility study for Indonesia's radio telescopes and networks is in progress. A single-dish parabolic radio antenna with a diameter of 20 m is proposed to work in a frequency range of 1–50 GHz. An array dipole antenna with an area of 100 m × 100 m will also be installed at a 70–350 MHz frequency. A feasibility study about system design is in progress, and a radio frequency interference (RFI) survey has been underway since 2014. In this paper, we described the design of radio telescopes such as parabolic reflectors, horn antenna, and the radio frequency interference (RFI) in the surrounding area of the National Observatory, covering the frequency band from 45 MHz to 18 GHz. The frequencies in 45–85 MHz and 120–360 MHz intervals are still relatively quiet and suitable for developing radio telescopes. The selected higher frequency of 1.4 GHz for a neutral hydrogen (HI) spectral line, 6.6 GHz for a methanol (CH3OH) spectral line, and 8.6 GHz for a helium (3 He+) spectral line is still relatively quiet and suitable for the development of radio telescopes. [ABSTRACT FROM AUTHOR]

The paper is devoted to the analysis of the observation results with the single-mirror radio telescope RT-22 (PRAO, LPI) in the water vapor maser line at 22 GHz in the direction of dust clumps from the ATLASGAL and Bolocam large-scale blind surveys in the millimeter continuum. The aim of this paper is to search for masers in the water vapor line in previously unexplored sources and to study the variability of known masers. Observations of 140 sources resulted in the detection of maser emission at 22 GHz in six sources, and in four sources (ATLASGAL 016.987+00.981, 017.216+00.821, 018.701–00.229, and Bolocam 081.174–00.100) masers were detected for the first time. In two sources (ATLASGAL 034.195–0.592 and Bolocam 081.174–0.1), the water vapor line masers showed significant variability during the 8-month observation and follow-up program. Comparison of RT-22 observational data with archival data from the GBT‑100 telescope (US National Radio Astronomy Observatory) showed that 9 out of 140 sources show a significant change in the radiation flux density of masers: two sources changed from the category of masers with low brightness ( Jy) to the category bright (more than 10 Jy), and in seven relatively bright earlier (more than 3 Jy) masers, no radiation was detected. Significant changes in the characteristics of the maser emission may indicate changes in the environmental conditions in which the maser emission was produced, which is of interest for further study of maser-related processes. [ABSTRACT FROM AUTHOR]

This paper proposes a new paradigm for spectrum sharing between cellular wireless communications (CWC) and radio astronomy systems (RAS). In contrast to the existing paradigm of geographical and spectral isolation between CWC and RAS, this paper develops a three phase spectrum access, which enables geographical and spectral coexistence between CWC and RAS. Shared spectrum access zone (SSAZ) is created around the RAS site and CWC cells within the SSAZ follow the three phase spectrum access scheme while those outside the SSAZ have full spectrum access. In addition, system characteristics-based improved spectrum sharing is developed. Furthermore, a built-in fine tuning mechanism is presented for addressing mismatches between design and practical environments as well as for facilitating service evolutions. Performance evaluation results demonstrate that the proposed paradigm offers 1) certain guaranteed spectrum access to RAS, which is impossible in the existing paradigm, 2) capability to handle higher peak and mean traffics to CWC under spectrum restructuring of both CWC and RAS bands, and 3) overall improved spectrum utilization. [ABSTRACT FROM AUTHOR]

The Square Kilometre Array (SKA) Observatory is a next-generation radio astronomy facility that has recently entered into the construction phase, after successful completion of the design and prototyping phases during 2013–2021. Planned to be operational by the end of this decade, the SKA is expected to revolutionise astronomy by allowing cutting edge explorations in an extremely wide range of science areas, while driving the growth of many important new state-of-the-art technologies. There are more than 10 countries currently participating in the international consortium to build this facility, which will be co-located in Australia and South Africa with the global headquarters in the United Kingdom. Indian scientists and engineers have played a significant role since the beginning: from the definition of the SKA concept and its science case, to some important aspects of the design of the instrument and the prototyping activities. India is now getting ready to join the construction phase of the SKA with a well defined proposal for technical activities spanning a few different areas of work. Along with this, Indian astronomers are busy refining their science case for the SKA and preparing in different ways to be ready for front line science with the facility as and when it is commissioned. All these activities are coordinated by the SKA India consortium, which currently has a membership of more than 20 institutions across the country. In this paper, we describe the current status of the SKA project, and focus on India's role—past contributions, ongoing activities and future plans. [ABSTRACT FROM AUTHOR]

The scarcity of radio spectrum led regulators to consider new frequency bands including Terahertz frequencies between 0.275 and 1 THz, which is previously reserved only for passive services such as satellite telemetry and radio astronomy. One of the major advantages of Terahertz bands is the available bandwidth. For example, future generation cellular networks would be able support extreme throughputs via Terahertz backhaul links. But the medium that the electromagnetic waves propagate need to be analyzed by this way theoretical results will turn to practical and commercially attractive results. This work will give the channel characteristics of detailed analyzes of CO2, H2O, O2, USA model (high latitude, winter)—USA model (tropics) between 0.275 and 10 THz range. The developed model in this paper evaluates the total absorption loss, path loss, SNR and capacity properties. The water vapor–H2O (which is the biggest enemy of high frequencies) with all isotopes is analyzed in this paper. This paper also presents the theoretical estimations of absorption properties of CO2, H2O, O2, USA model (high latitude, winter)—USA model (tropics) at the THz frequency band from 0.275 to 10 THz. [ABSTRACT FROM AUTHOR]

This paper presents a report on the activities and the proposed action plan of the Education and Public Outreach Working Group (EPO WG) of Square Kilometre Array–India Consortium (SKAIC). Details of a set of flagship programs as well as supporting activities are presented, in consonance with the scale of India's involvement in Square Kilometre Array Observatory (SKAO), as well as the educational and science literacy contexts in the country. Ongoing independent EPO activities by some of the member institutions are also included. [ABSTRACT FROM AUTHOR]

We have developed, manufactured, and tested a new feed design for interferometric radio telescopes with "large-N, small-D" designs. Such arrays require low-cost and low-complexity feeds for mass production on reasonable timescales and budgets, and also require those feeds to be compact to minimize obstruction of the dishes, along with having ultra-wide frequency bands of operation for most current and future science goals. The feed presented in this paper modifies the exponentially tapered slot antenna (Vivaldi) and quad-ridged flared horn antenna designs by having an oversized backshort, a novel method of maintaining a small size that is well-suited for deeper dishes (f ∕ D ≤ 0. 2 5). It is made of laser cut aluminum and printed circuit boards, such that it is inexpensive (≲ 7 5 USD per feed in large-scale production) and quick to build; it has a 5:1 frequency ratio, and its size is approximately a third of its longest operating wavelength. We present the science and engineering constraints that went into design decisions, the development and optimization process, and the simulated performance. A version of this feed design was optimized and fabricated for the Canadian Hydrogen Observatory and Radio-transient Detector (CHORD) prototypes. When simulated on CHORD's very deep dishes (f ∕ D = 0. 2 1) and with CHORD's custom first-stage amplifiers, the on-sky system temperature T sys of the complete receiving system from dish to digitizer remains below 30 K over most of the 0.3–1.5 GHz band, and maintains an aperture efficiency η A between 0.4 and 0.6. The entire receiving chain operates at ambient temperature. The feed is designed to slightly under-illuminate the CHORD dishes, in order to minimize coupling between array elements and spillover. [ABSTRACT FROM AUTHOR]