Search

In the present work, raw materials, namely zinc acetate dihydrate, iron nitrate nonahydrate, and solvent 2-methoxyethanol, were utilized to synthesize zinc ferrite nanoparticles by sol–gel method. The synthesized material was annealed at different temperatures of 500 °C, 600 °C, and 700 °C to study its effect on morphological, optical, and magnetic properties. Formation of single phase spinel cubic structure with intense peak orientation along (311) direction was confirmed by powder X-ray diffraction pattern. FESEM and EDX spectra of the annealed samples confirmed the surface morphology and elemental composition. UV–visible spectral analysis was used to examine the optical properties of the samples. VSM at room temperature revealed the ferromagnetic behavior of zinc ferrite nanoparticles. All the prepared samples at different annealing temperatures showed good antibacterial properties against different bacterial strains. [ABSTRACT FROM AUTHOR]

Aims: To synthesize a silver-cored nanosuspension utilizing Ziziphus spina-christi fresh-leaf extract and evaluate their antimicrobial activity against multidrug-resistant pathogenic microbes. Materials and Methods: The prepared nanosuspension was analyzed by spectro-analytical techniques and tested for antimicrobial activity and resistance to biofilm formation. The leaf extract and nanosuspension were tested separately and together as a mixture. Results: Constituent nanoparticles were average-sized (∼34 nm) and were active against both Gram-positive and Gram-negative microbes and yeast. Candida albicans showed a 24.50 ± 1.50 mm inhibition zone, followed by Escherichia coli and Staphylococcus aureus. Increased bioactivity with the highest multifold increments, 150%, for erythromycin against all tested microbes was observed. Carbenicillin and trimethoprim showed 166%- and 300%-fold increments for antimicrobial activity against Pseudomonas aeruginosa, respectively. Conclusion: The nanosuspension exhibited strong potential as an antimicrobial agent and overcame multidrug resistance. Ziziphus spina-christi leaf extract-coated silver nanoparticles were synthesized using an environment-friendly method, and the preparation was effective against Escherichia coli, Staphylococcus aureus and Candida albicans. The prepared formulation showed increased antimicrobial activity at a 150–300% increase compared with leaf extract-only activity. The prepared suspension was also active against Pseudomonas aeruginosa, the multidrug-resistant microbe, and has the potential to treat drug-resistant microbial infections. [ABSTRACT FROM AUTHOR]

Aim: The cytotoxic effects of graphene oxide nanoparticles (GONPs) using MTT assays, observance of apoptotic markers, and oxidative stress were outlined. Materials & methods: Rat embryonic fibroblasts (REFs) and human epithelial breast cells (HBLs) were used at 250, 500 and 750 μg/ml concentrations. Results: Significant cytotoxic and apoptotic effects were observed. Analyses of CYP2E1 and malondialdehyde concentrations in REF and HBL-100 cell lines after exposing to GONPs confirmed the nanomaterials toxicity. However, the glutathione levels in REF and HBL-100 cell lines showed a substantial reduction compared with the control. The cytochrome CYP2E1, glutathione, malondialdehyde and caspase-3 alterations provided a plausible interlinked relationship. Conclusion: The study confirmed the GONPs cytotoxic effects on REF and HBL-100 cell lines. The outcome suggested caution in wide-spread applications of GONPs, which could have implications for occupational health also. [ABSTRACT FROM AUTHOR]

Combination of bovine serum albumin with microemulsions as constituting ingredient biopolymer has long been regarded an innovative method to address the surface functionalization and stability issues in the targeted payload deliveries, thereupon producing effectively modified microemulsions, which are superior in loading capacity, transitional and shelf-stability, as well as site-directed/site-preferred delivery, has become a favored option. The current study aimed to develop an efficient, suitable and functional microemulsion system encapsulating sesame oil (SO) as a model payload towards developing an efficient delivery platform. UV-VIS, FT-IR, and FE-SEM were used to characterize, and analyze the developed carrier. Physicochemical properties assessments of the microemulsion by dynamic light scattering size distributions, zeta-potential, and electron micrographic analyses were performed. The mechanical properties for rheological behavior were also studied. The HFF-2 cell line and hemolysis assays were conducted to ascertain the cell viability, and in vitro biocompatibility. The in vivo toxicity was determined based on a predicted median lethal dose (LD50) model, wherein the liver enzymes' functions were also tested to assess and confirm the predicted toxicity. [ABSTRACT FROM AUTHOR]

The sulfur content in crude oil and its derivatives negatively affects all aspects of life, especially economic, environmental and industrial. It is vital to create methods and materials that are both affordable and environmentally friendly in order to remove sulfur from crude oil. for this purpose titanium oxide (TiO2) and molybdenum trioxide (MoO3) nanoparticles were prepared by hydrothermal method at different temperatures and characterized by several techniques including using scanning electron microscopy (SEM), x-ray diffraction (XRD), Fourier-Transform Infrared Spectroscopy (FT-IR), zeta potential, and dynamic light scattering (DLS) to find out some physical and chemical properties of the prepared nano compounds, The results showed that (MoO3) was more efficient than (TiO2) in reducing the sulfur content of crude oil. This work presents a successful example of the preparation of TiO2 and MoO3 NPs based hydrothermal method and the successful application of these NPs as active components, for the potential sulfur compound adsorbents, supporting environmental treatment. [ABSTRACT FROM AUTHOR]

The study planned to estimate biological parameters linked to rheumatoid arthritis (RA) patients, detecting the influence of MTX and biotherapy treatments on these parameters and synthesizing methotrexate bovine serum albumin nanoparticles linked to folate (FA-MTX-BSA NPs) to reduce the overwhelming expression of inflammatory cytokines. Inflammatory parameters showed significant increases in newly diagnosed and MTX-receiving groups while no changes were observed in the biotherapy-maintained group. MTX-loaded BSA nanoparticles were fabricated by the desolvation method and further linked to activated folic acid to obtain FA-MTX-BSA NPs. FA-MTX-BSA NPs were successfully characterized within the nanoscale range using different screening techniques. FA-MTX-BSA NPs showed an in vitro release in a sustained manner. The potential of MTX, MTX-BSA NPs, and FA-MTX-BSA NPs in inducing cytokine level reduction was detected. Significant decreases in interleukin- 1 beta (IL-1β), interleukin-6 (IL-6), and tumor necrosis factor-alpha (TNF-α) levels were obtained in cultures treated with FA-MTX-BSA NPs compared to the untreated culture in a dose-dependent pattern. Furthermore, FA-MTX-BSA NPs comparing with MTX and MTX-BSA NPs exhibited a significant advanced effect in decreasing cytokines levels. Accordingly, the conjunction of BSA NPs and MTX linked to folate potentially reduced cytokines manifestation in RA. [ABSTRACT FROM AUTHOR]

Titanium dioxide nanoparticles (TiO2 NPs) are photo-active metallic nanoparticles becoming promising agents in modern biomedical applications. Herein, a novel process for the synthesis of TiO2 NPs with high stability was developed by a sol–gel process and to investigate their cytotoxicity and antibacterial activity. Numerous experiments have been performed to confirm the morphologies, compositions, and physicochemical properties of prepared TiO2 NPs, such as field emission scanning electron microscopy, dynamic light scattering, Zeta potential, Fourier transform infrared spectroscopy and X-ray diffraction. MTT assay was applied to assess the cytotoxicity of the prepared nanoparticles. The results indicate that the synthesized nanoparticles' diameter is about 68 nm and contains the anatase phase, in the range of 2θ from 25 to 80 °C. The hydrodynamic radius of nanoparticles is about 140.4 nm, and the zeta potential of nanoparticles is about −44.6 mV. The MTT results have not shown any toxicity; the antibacterial inhibitory effect of TiO2 NPs at 200 mg/mL concentrations exhibited superior antibacterial activity at 15.9 ± 0.1, 14.0 ± 0.1 against Staphylococcus aureus and Escherichia coli, respectively. In conclusion, colloidal solutions with high stability were successfully synthesized, contributing to decreased dimensions and increased antibacterial properties. [ABSTRACT FROM AUTHOR]

Compared to traditional physical and chemical approaches, nanobiotechnology and plant-based green synthesis procedures offer significant advantages, as well as having a greater range of medical and biotechnological applications. Nanoparticles of zinc oxide (ZnO NPs) have recently been recognized as a promising option for many industries, including optics, electrics, packaged foods, and medicine, due to their biocompatibility, low cytotoxicity, and cost-effectiveness. Several studies have shown that zinc ions are important in triggering cell apoptosis by promoting the generation of reactive oxygen species (ROSs) and releasing zinc ions (Zn2+), which are toxic to cells. The toxic nature of the chemicals used in the synthesis of ZnO nanoparticles limits their clinical utility. An overview of recent developments in green ZnO NP synthesis is presented in this review, emphasizing plant parts as reducing agents and their medical applications, including their antimicrobial, anticancer, antioxidant, and anti-inflammatory properties, as well as key mechanisms of action for these applications to facilitate further research on the biomedical fields in the future. [ABSTRACT FROM AUTHOR]

Carbon nanomaterials are ground-breaking two-dimensional materials with a wide range of applications because of their unique properties, which include excellent optical, electrical, thermal, and mechanical capabilities; biocompatibility; and inexpensive large-scale production costs. In this study, carbon nanostructural materials (CNMs) were effectively generated using a pulsed laser ablation method on a graphite target immersed in deionized water, and their cytotoxicity and antibacterial activities were evaluated. Lasing pulse duration, ns (1064 nm) with different laser energies (60-220 mJ), was employed for irradiating the target. The formation of CNMs was analyzed using Fourier transform infrared spectroscopy, which demonstrated that C–H, C–C, C–O, and C=C bonds were successfully formed. TEM micrographs observed CNM formation with a spherical shape and size ranging from 20 to 90 nm. The absorbance was measured using UV-Vis spectroscopy; it increased with increasing laser energy showing two broad shoulders around 210 and 305 nm. Thereafter, the antibacterial activity was tested against Escherichia coli and Staphylococcus aureus using the agar method. The results indicated that CNMs fabricated at laser energy 220 mJ have the highest activity against both strains and have presented inhibition zone (IZ) of about 34 ± 1.0 mm in S. aureus and 31 ± 1.5 mm for E. coli. A comparison with CNMs prepared at 160 mJ showed an IZ of 14 mm for S. aureus and of 12 mm for E. coli due to synergistic impact, while the cellular material release analysis displayed increased release with respect to the time of exposure due to inhibition of bacterial growth. [ABSTRACT FROM AUTHOR]

Laser ablation in liquid was utilized to prepare a TiO2 NP suspension in in deionized distilled water using Q-switch Nd: YAG laser at various laser energies and ablation times. The samples were characterized using UV–visible absorption spectra obtained with a UV–visible spectrophotometer (UV-Vis,) Fourier transform infrared (FTIR), X-ray diffraction (XRD), and transmission electron microscope (TEM). While, UV-Vis spectra showed the characteristic band-to-band absorption peak of TiO2 NPs in the UV range. FTIR analysis showed the existence of O-Ti-O bond. XRD patterns indicated the presence of (101) and (112) plane crystalline phases of TiO2. TEM images showed a spherical-like structure of TiO2 NPs with various size distributions depending on the ablation period. It was also found that there is a relationship between laser ablation time and TiO2 NP size distribution, where longer ablation times led to the smaller size distribution. The antibacterial activity of TiO2 NPs was evaluated with different species of bacteria such as Escherichia coli, Pseudomonas aeruginosa, Proteus vulgaris, and Staphylococcus aureus, using the liquid approach. The optimum activity of TiO2 NPs is found to be against E. coli at 1000 μg mL−1. Furthermore, adding, TiO2 NPs (1000 μg mL−1) in the presence of amoxicillin has a synergic effect on E. coli and S. aureus growth, as measured by the well diffusion method. However, both E. coli (11.6 ± 0.57mm) and S. aureus (13.3 ± 0.57mm) were inhibited by this process. [ABSTRACT FROM AUTHOR]

Zinc oxide nanoparticles (ZnO NPs) have acquired large attention against microbial activity because of their distinctive properties associated with their size and shape. In current research, ZnO NPs produced by the Sol-gel method at room temperature were applied to evaluate its antibacterial activity against pathogenic bacterial strains of Staphylococcus aureus and Escherichia coli obtained from Al-Sadr Hospital, Maysan, Iraq. The prepared nanoparticles were investigated by dynamic light scattering (DLS), X-ray diffraction (XRD), and scanning electron microscopy (SEM). Antibacterial activity was tested by using the agar diffusion method, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC) after 24 h of exposure to prepared ZnO NPs. The size distribution, characterization, and morphology of nanoparticles showed around 100 nm as observed by DLS, and the formed nanoparticles were spherically confirmed by SEM. Additionally, results of the disc diffusion test showed significant inhibition of growth of both bacterial strains by ZnO NPs. In conclusion, ZnO NPs created by the sol-gel method had an excellent antibacterial effect, that could be used to produce ZnO NPs for biomedical applications. [ABSTRACT FROM AUTHOR]

A dual-targeting nanomedicine composed of pH-sensitive superparamagnetic iron oxide core-gold shell SPION@Au, chitosan (CS), and folate (FA) was developed as a doxorubicin (DOX) antitumor medication. Microemulsion was used for preparation and cross-linking conjugation. The characteristics of the designed nanocomposite were studied using atomic force microscopy (AFM), transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction, UV-visible spectroscopy, Zeta potential and vibrating sample magnetometry (VSM), and Fourier transform infrared spectroscopy. The prepared SPION@Au-CS-DOX-FA nanoparticles (NPs) were spherical with an average diameter of 102.6 ± 7 nm and displayed an elevated drug loading behavior and sustained drug release capacity. The SPION@Au-CS-DOX-FA NPs revealed long term anti-cancer efficacy due to their cytotoxic effect and apoptotic inducing efficiency in SkBr3 cell lines. Additionally, Real-time PCR outcomes significantly showed an increase in BAK and BAX expression and a decrease in BCL-XL and BCL-2. In vivo results revealed that SPION@Au significantly decreased the tumor size in treated mice through magnetization. In conclusion, prepared SPION@Au-CS-DOX-FA could be a beneficial drug formulation for clinical breast cancer treatment. [ABSTRACT FROM AUTHOR]