Search

Immobilizing natural antioxidant and biologically active molecules in layered double hydroxides (LDHs) is an excellent method to retain and release these substances in a controlled manner, as well as protect them from thermal and photochemical degradation. Herein, we describe the preparation of host–guest systems based on LDHs and rosmarinic and glycyrrhetinic acids, two molecules obtained from the extraction of herbs and licorice root, respectively, with antioxidant, antimicrobial, and anti-inflammatory properties. Intercalation between the lamellae of the mono-deprotonated anions of rosmarinic and glycyrrhetinic acid (RA and GA), alone or in the presence of an alkyl surfactant, allows for readily dispersible systems in biobased polymer matrices such as poly(lactic acid) (PLA), poly(butylene succinate) (PBS), and a 60/40 wt./wt. PLA/PBS blend. The composites based on the PLA/PBS blend showed better interphase compatibility than the neat blend, correlated with increased adhesion at the interface and a decreased dispersed phase size. In addition, we proved that the active species migrate slowly from thin films of the composite materials in a hydroalcoholic solvent, confirming the optimization of the release process. Finally, both host–guest systems and polymeric composites showed antioxidant capacity and, in the case of the PLA composite containing LDH-RA, excellent inhibitory capacity against E. coli and S. aureus. [ABSTRACT FROM AUTHOR]

Aiming at the tuning of thermo-mechanical features by chemical cross-linking, a biopolyester commercial blend based on poly(lactic acid) (PLA) with poly(butylene adipate-co-terephthalate)(PBAT) (ecovio®T2280, BASF) was processed in Brabender in the presence of dicumyl peroxide (DCP, 0-0.2 wt.-%). The effect of DCP addition was investigated and rationalized by means of solubility tests and gel content evaluation, as well as rheological, mechanical, and molecular weight analysis of the prepared compounds. Moreover, detailed DSC and TMDSC investigations provided a deep insight into the structural modifications occurred at the macromolecular level. We found that chain branching as well as cross-linking occurred in the samples processed in the presence of DCP, thus returning compounds having increased toughness and modulated crystalline content and thermal behavior. Noteworthy, the presence of specific, undisclosed additives, triggers the occurrence of peculiar behaviors in the ecovio® commercial blend, not previously observed in model PLA/PBAT blends of similar composition. Despite only partially soluble in chloroform, the new ecovio® DCP-modified compounds still remained workable in the melt, thus providing a suitable, simple and economically affordable strategy to finely modulate the thermo-mechanical properties starting from a commercially available, compostable compound. [ABSTRACT FROM AUTHOR]

Abstract: Poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) are biodegradable aliphatic polyesters, which being semicrystalline and thermoplastic can be processed by conventional methods. Their blends give interesting materials for industrial packaging applications, due to their increased ductility as PBAT content increases. However, like many aliphatic polyesters, the PLA matrix degrades upon melt processing thus affecting the thermo-mechanical features of the blended material. In this work, we studied the effect of processing at high temperature on the molecular weight distribution, morphology, and thermo-mechanical properties of both homopolymers, as well as the PLA/PBAT 75/25 blend. Notably, different processing conditions were adopted in terms of temperature (range 150–200°C) and other relevant processing parameters (moisture removal and nitrogen atmosphere). Analysis of PLA/PBAT blends indicated that intermolecular chain reactions took place under strong degradative conditions of PLA, yielding PLA/PBAT mixed chains (copolymers). Increasing amounts of copolymers resulted in improved phase dispersion and increased ductility, as SEM and mechanical tests indicated. Conversely, reduced PLA degradation with less copolymer formation, afforded higher modulus materials, owing to poorer dispersion of the soft phase (PBAT) into the PLA matrix. [Copyright &y& Elsevier]

The article examines the modulation of poly(lactic acid) (PLA) properties as a consequence of poly(butylene adipate-co-terepthalate) (PBAT) blending and acetyl tributyl citrate (ATBC) plasticization. The researchers evaluated the effect of the concentration of either the plasticizer or copolyester on the final material flexibility of the PLA. The study analyzed the preferential solubilization of ATBC in the PBAT phase and assessed the possible use of PLA in food packaging applications.

In the perspective of producing a rigid renewable and environmentally friendly rigid packaging material, two comb-like copolymers of cellulose acetate (AC) and oligo(lactic acid) OLA, feeding different percentages of oligo(lactic acid) segments, were prepared by chemical synthesis in solvent or reactive extrusion in the melt, using a diepoxide as the coupling agent and were used as compatibilizers for poly(lactic acid)/plasticized cellulose acetate PLA/pAC blends. The blends were extruded at 230 °C or 197 °C and a similar compatibilizing behavior was observed for the different compatibilizers. The compatibilizer C1 containing 80 wt% of AC and 14 wt% of OLA resulted effective in compatibilization and it was easily obtained by reactive extrusion. Considering these results, different PLAX/pAC(100-X) compounds containing C1 as the compatibilizer were prepared by extrusion at 197 °C and tested in terms of their tensile and impact properties. Reference materials were the uncompatibilized corresponding blend (PLAX/pAC(100-X)) and the blend of PLA, at the same wt%, with C1. Significant increase in Young's modulus and tensile strength were observed in the compatibilized blends, in dependence of their morphologic features, suggesting the achievement of an improved interfacial adhesion thanks to the occurred compatibilization. [ABSTRACT FROM AUTHOR]