Search

• The structural (α)-process in loratadine (LOR) is sensitive to compression. • The pressure dependence of τ JG β is weaker with respect to that of τ α. • There is a breakdown of exact isochronal α and JG β superpositioning in LOR. • Reason for that is probably the increase of order in the system due to densification. In this paper, high-pressure (HP) dielectric studies on the van der Waals active pharmaceutical ingredient (API) - loratadine (LOR) were carried out. It was found that, surprisingly, the secondary (β) relaxation, which, according to the Coupling Model (CM) predictions, was classified as a Johari-Goldstein (JG) process, separates from the structural (α)-mode with compression (although the shape of the α -peak is invariant to the thermodynamic conditions at constant τ α). Consequently, there is a breakdown of the isochronal superpositioning of α - and β - relaxation times (τ α and τ β) in this system, which is a typical behavior for the secondary process with intermolecular character. Based on these findings, two possibilities concerning the origin of the β -relaxation in LOR have been proposed: 1) it is a non-JG process (probably originating from fluctuations within cyclic rings of the API molecule), which, however, satisfies the CM predictions; or 2) it is a JG-process, which similarly to a few earlier examined H-bonded compounds (e.g., probucol and sorbitol) is characterized by a different sensitivity to compression when compared to the α -process. Moreover, it was found that the activation entropy for the β -process takes negative values, irrespective of the pressure conditions. That may be interpreted as a result of conformational variation or the loss of translational and rotational degrees of freedom, leading to increased order in API due to densification. The results presented herein give a new insight into the relationship between the structural and secondary relaxations in the close vicinity of the glass transition temperature. Furthermore, they show that HP studies are crucial in elucidating the correlation between these processes. [ABSTRACT FROM AUTHOR]

In this paper, thermal properties, atomic-scale structure, and molecular dynamics (at ambient and high pressure) of native melatonin (MLT) and its partially-deuterated derivative (MLT-d2) have been investigated. Based on infrared spectroscopy, it was shown that treating MLT with D2O causes the replacement of hydrogen atoms attached to the nitrogen by deuterium. The degree of such substitution was very high (> 99%) and the deuterated sample remained stable after exposure to the air as well as during the melting and vitrification processes. Further calorimetric studies revealed the appearance of a peculiar thermal event before the melting of crystalline MLT-d2, which was assigned by the X-ray diffraction to a local negative thermal expansion of the unit cell. Finally, the high-pressure dielectric experiments indicated a few interesting findings, including the variation in the shape of the structural relaxation peak during compression, the difference in the pressure evolution of the glass transition temperature, and the temperature dependence of activation volume for both MLT species. The variations in these parameters manifest a different impact of the compression/densification on the dynamics of hydrogen and deuterium bonds in the native and partially-deuterated MLT, respectively. [ABSTRACT FROM AUTHOR]

In this study, several experimental techniques were applied to probe thermal properties, molecular dynamics, crystallization kinetics and intermolecular interactions in binary mixtures (BMs) composed of flutamide (FL) and various poly(N-vinylpyrrolidone) (PVP) polymers, including a commercial product and, importantly, samples obtained from high-pressure syntheses, which differ in microstructure (defined by the tacticity of the macromolecule) from the commercial PVP. Differential Scanning Calorimetry (DSC) studies revealed a particularly large difference between the glass transition temperature (Tg) of FL+PVPsynth. mixtures with 10 and 30 wt% of the excipient. In the case of the FL+PVPcomm. system, this effect was significantly lower. Such unexpected findings for the former mixtures were strictly connected to the variation of the microstructure of the polymer. Moreover, combined DSC and dielectric measurements showed that the onset of FL crystallization is significantly suppressed in the BM composed of the synthesized polymers. Further non-isothermal DSC investigations carried out on various FL+10 wt% PVP mixtures revealed a slowing down of FL crystallization in all FL-based systems (the best inhibitor of this process was PVP Mn = 190 kg/mol). Our research indicated a significant contribution of the microstructure of the polymer on the physical stability of the pharmaceutical—an issue completely overlooked in the literature. [ABSTRACT FROM AUTHOR]

Star-shaped glycopolymers due to the attractive combination of the physicochemical, morphological, self-assembly properties along with biological activity have gained increased attention as innovative agents in novel cancer therapies. Unfortunately, the production of these highly desirable biomaterials remains a challenge in modern macromolecular chemistry. The main reason for that is the low polymerizability of ionic glycomonomers originated from their steric congestion and the occurrence of ionic interactions that generally negatively influence the polymerization progress and hinder controllable reaction pathway. In this work, the new ionic sugar monomer was (co)polymerized for the first time via Activator Generated by Electron Transfer Atom Transfer Radical Polymerization (AGET ATRP) using a three-arm resveratrol-based core to obtain star-like (co)polymers. The obtained products were examined in terms of their physicochemical properties and morphology. Aside from the synthesis of these new glycopolymers, also a thorough description of their thermal properties, ability to self-assembly, the formation of stable superstructures was studied in detail. It was found that examined (co)polymers did not show any heterogeneities and phase separation, while their variation of glass transition temperature (Tg) was strictly related to the change in the number of glycomonomer. Also, the stability and shapes of formed superstructures strictly depend on their composition and topology. Finally, we have shown that synthesized carbohydrate-based polymers revealed high antiproliferative activity against several cancer cell lines (i.e., breast, colon, glioma, and lung cancer). The cytotoxic activity was particularly observed for star-shaped polymers that were systematically enhanced with the growing concentration of amine moieties and molecular weight. The results presented herein suggest that synthesized star-shaped glyco(co)polymers are promising as drug or gene carriers in anticancer therapies or anti-tumor agents, depending on their cytotoxicity. [ABSTRACT FROM AUTHOR]

In this paper, we studied for the first time the impact of the molecular weight, M n , and the topology on the molecular dynamics of a series of grafted poly(poly(dimethylsiloxane methacrylate)) (polyPDMSMA). The behavior of grafted (molecular brushes) polyPDMSMA and their three-armed counterparts of tailor-made properties prepared by Atom Transfer Radical Polymerization (ATRP) was monitored by means of broadband dielectric spectroscopy (BDS), differential scanning calorimetry (DSC) and comprehensive rheology analysis. Surprisingly, the dielectric loss spectra of all studied polyPDMSMA exhibit the presence of two dielectric relaxation processes above their glass transition temperature, T g. A comparison of dielectric, calorimetric and mechanical data indicated that the faster and slower relaxation processes identified in loss spectra can be related to the segmental and chain dynamics, respectively. Interestingly, we observed that the "local" segmental dynamics of studied polyPDMSMA, involving the mobility of few repeatable units creating a segment, is almost unaffected by neither the length of polymer chain, number of grafts nor its topology. This is also reflected in a weak molecular weight-dependences of T g of studied polyPDMSMA independently to their topology. On the other hand, the time-scale separation between segmental and the chain modes as well as the amplitude of the latter process increase with growing M n of all examined polyPDMSMA. Additionally, it should be mentioned that the mechanical data collected for samples characterized by high molecular weight (of M n > 280 kg/mol) reveal the emergence of additional process (most likely related to the grafts and/or the star arm relaxation) at the intermediate regime, independently to their topology. Interestingly, this mode was observed to be much slower for the star-shaped macromolecules when compared to the grafted polymers, despite their lower M n. This implies that the observed differences are not a result of different molecular weights, but rather originate from a various molecular mechanism due to the different topology of the studied samples. In this context, one can assume that in the case of high-molecular-weight macromolecules, the backbone architecture has a significant influence on the behavior of polymers, including their molecular dynamics. [Display omitted] • Increase of the glass transition of studied polyPDMSMA with their molecular weight. • Loss spectra of polyPDMSMA exhibit multiple dielectric relaxation processes. • Observed dielectric processes were assigned as the chain and segmental modes. • Presence of grafts/arms relaxation (or entanglement segments) in mechanical data. [ABSTRACT FROM AUTHOR]

In this paper, the molecular dynamics as well as inter- and intramolecular interactions in the homogenous solid dispersions (SDs) of active pharmaceutical ingredient - probucol (PRO) with acetylated glucose (acGLU), acetylated sucrose (acSUC), and sucrose acetoisobutyrate (aibSUC), prepared in 5:1 molar ratio, have been investigated using broadband dielectric (BD) and Fourier transform infrared (FTIR) spectroscopy. Importantly, high pressure dielectric measurements revealed that as for neat PRO, a breakdown of the isochronal structural (α) and JG- β exact superpositioning, due to increasing separation between both processes under compression, can also be detected in its mixtures with acetylated saccharides (acSACCHs). Furthermore, the analysis of temperature dependences of JG- β -relaxation times for PRO and PRO-acSACCH SDs at selected isobaric conditions indicated the increase in the cooperativity of the secondary process (reflected in the value of the activation entropy, Δ S β) at elevated pressure in all systems. The mere addition of the small amount of excipient to neat PRO (p = 0.1 MPa) resulted in a greater value of Δ S β (it was the most noticeable in the case of aibSUC). Further FTIR studies carried out on the pressure densified glasses of PRO, and binary mixtures suggested that the observed changes in the cooperativity of the JG- β -process, as well as the failure of the exact isochronal superpositioning of α - and JG- β relaxation times, are due to varying H-bond pattern in the examined single- and two-component systems at high compression/in the presence of saccharide. [Display omitted] [ABSTRACT FROM AUTHOR]

Different experimental techniques were applied to study thermal and structural properties, strength of H-bonds, possible keto - enol tautomerism and molecular dynamics at various thermodynamic conditions in the H-bonded active substance, curcumin (CRM). Dielectric measurements revealed dynamical features of examined compound that are uncharacteristic for the associated systems. This includes enormously large pressure coefficient of the glass transition temperature and prominent drop of the fragility with compression. Simultaneously, the shape of α -process slightly broadened at elevated pressures. Infrared investigations demonstrated that this effect is related to the variation in the population of H-bonds. Moreover, we studied the changes in the structural and dynamical properties of the glasses prepared upon cooling of the melt (ordinary glass, OG) and the one obtained after compression of CRM in the liquid phase and decompression at T = 293 K (dense glass, DG). Interestingly, during the aging of the latter sample, a clear shift of the β -relaxation towards higher frequencies was noted. This unexpected result indicated that the density of DG is probably getting smaller with time. Complementary X-ray diffraction experiments confirmed this supposition. Additionally, they showed that in DG there are traces of polymorph II of CRM that has a higher density than initial crystals (polymorph I). Finally, infrared studies demonstrated that H-bond pattern in DG is slightly different with respect to OG. Furthermore, Raman investigations suggested that probably keto - enol tautomerism might be shifted towards diketo form in the glass obtained at high compression. Our investigations are very interesting in the context of better understanding of the behavior of associated systems at high compression as well as provide a better insight into dynamics of higher density glasses produced at elevated pressures. Unlabelled Image [ABSTRACT FROM AUTHOR]

In this paper, we have investigated dielectric response at ambient and elevated pressure of poly(mercaptopropyl)methylsiloxane (PMMS) based oligomeric brushes, where the thiol moiety was substituted by various butyl acrylate isomers (n -butyl acrylate (nBA), iso -butyl acrylate (isoBA), tert -butyl acrylate (tertBA)). It was found that the glass transition temperature, T g , of PMMS is much lower with respect to the other systems despite its ability to form weak hydrogen (H) bonds. What is more, the length scale of cooperativity was the highest in homopolymer and scaled with the steric hindrance of the graft. We also demonstrated that in the examined grafted copolymers, there is one broad relaxation process in dielectric spectra which is wider than that recorded in mechanical response. That probably means that similarly to PMMS, there are two relaxation processes above T g in grafted copolymers. However, due to similar timescale, they cannot be separated. Further, high-pressure experiments revealed that pressure coefficient of the glass transition temperature, d T g / d p , as well as the activation volume, Δ V , calculated for the segmental process surprisingly does not scale with either the size of monomer nor steric hindrance. This unexpected result must be related to the specific structure adopted by the studied grafted oligomers. Presented herein data expand our understanding on the impact of topology on the dynamics of polymers at ambient and high pressure. [Display omitted] • The glass transition temperature is strongly affected by a graft structure. • All grafted materials revealed the broad segmental relaxation process. • The shape of the α -process remains constant with pressure for all materials. • The pressure coefficient of the glass transition changes with graft structures. [ABSTRACT FROM AUTHOR]

This work demonstrates the effect of a high dc bias field (up to 160 kV/cm) on the polyaddition reaction of the modeled epoxy resin system. Polymerization of bisphenol A diglycidyl ether (DGEBA) supported by high electric field results in obtaining epoxides with significantly increased molecular weight, which is seven-fold higher than the zero-field reference (M n = 4.7 kg/mol). We also found a markedly reduced dispersity (Ð = 1.52 at 0 kV/cm, Đ = 1.21 at 160 kV/cm). The molecular weight and dispersity of obtained polymers change almost linearly with the reaction time. By following polymerization kinetics in the real-time of the experiment, via dielectric spectroscopy, we observe slowing down the reaction progress at dc fields of E = 160 kV/cm, compared to the zero-field case, E = 0 kV/cm. The polymer materials obtained in the presence/absence of static electric fields exhibit distinctly different glass transition temperatures. Our study highlights a better control over the reaction and product properties attained by using only the magnitude of the applied field as the control variable. Thus, a high electric field could provide an alternative pathway in synthesizing and developing advanced polymer materials using simpler, "green", less-expensive, and technologically demanding approaches. [Display omitted] [ABSTRACT FROM AUTHOR]

• There is an anomalous narrowing of the α -peak with compression in acTRE and silTRE. • The temperature-pressure superpositioning is not satisfied in these systems. • The reason for that is probably a change in local structure of molecules at high p. • α-relaxation in silTRE is characterized by extremely high sensitivity to compression. In this paper, broadband dielectric spectroscopy (BDS) was applied to study the molecular dynamics of the methyl, acetyl, and silyl derivatives of trehalose, TRE (metTRE, acTRE, and silTRE, respectively) at high pressure (p). Unexpectedly, our investigations indicated a breakdown of the temperature–pressure superpositioning (TPS) in acTRE and silTRE since the α -loss peak got narrower during compression. Importantly, a similar finding has been reported earlier only for one low-molecular weight compound, i.e., tris(dimethylsiloxy)phenylsilane. Additional X-ray diffraction (XRD) measurements carried out on the ordinary and pressure densified glasses of acTRE indicated that the changes in the width of the α -process in this saccharide (and probably silTRE) are rather due to variations in the supramolecular structure and enhanced local ordering occurring at high p. What is more, we also thoroughly characterized the structural dynamics of three TRE derivatives at different thermodynamic conditions. It was found that the sensitivity of the α -relaxation to compression, reflected in the pressure coefficient of the glass transition temperature (d T g /d p) and activation volume for the α -process, Δ V α (at T = T g), increases with increasing molecular weight (M w) of the modified carbohydrate. Interestingly, for silTRE both d T g /d p and Δ V α were extremely high, reaching the following values: 453 K/GPa and 1049 cm3/mol, respectively. Our data clearly revealed a link between the local structure of compressed van der Waals liquids and peculiar anomalous variations in the shape of the structural process upon densification. [ABSTRACT FROM AUTHOR]

Poly(1-vinyl-2-pyrrolidone) (Povidone, PVP) is one of the most interesting and versatile synthetic polymers utilised in the pharmaceutical and cosmetic industries. Its large-scale commercial production offers an assortment of products in a wide range of molecular weights but poorly-controlled (macro)structural parameters (i.e., dispersity, functionality) limiting the efficiency of PVP-based drug delivery systems (DDS). In this work, synthesised linear and star-shaped PVPs with a strictly defined structure and functionality were compared with the linear, commercially-supplied product and explored as potential vehicles for physical entrapment of metronidazole (MTZ). Here, a question is addressed how differences in their macromolecular properties affect the amorphisation of MTZ, drug encapsulation, the stability of drug-loaded micellar structures and their in vitro release from the carrier. The X-ray diffraction studies and calorimetric measurements revealed that MTZ crystallises in all investigated herein systems reducing the glass transition temperature of the binary mixture significantly. Transmission electron microscopy and dynamic light scattering analysis revealed that MTZ-loaded DDS are able to form ultrasmall regular nanocarriers with an increasing effect of regularity and sphericity from star-shaped DDS to linear-based ones. We founded that synthesised linear-based DDS is the most effective for MTZ entrapment (PVP:MTZ = 1:1 weight ratio) due to their smallest hydrodynamic radius d h = 14.7 nm, the highest stability of micellar structures −2.37 mV, and the highest values of loaded drug 76.5%. Moreover, all applied PVP-based DDS revealed an initial burst release effect of MTZ (pH = 7.4) reaching up to 60% of drug released within the first 5 h (the first-order release model fits). The marked efficiency of MTZ-loaded DDS of strictly defined structural parameters indicates the great importance of polymer preparation strategy in the targeted therapy. [Display omitted] • Metronidazole-polyvinylpyrrolidone (MTZ-PVP) drug delivery systems were obtained using polymers of various topology. • Commercial linear pvp has been compared with synthesised linear and star ones in terms of ability to form stable micelles and solubilize MTZ. • MTZ-loaded DDS are able to form ultrasmall regular nanocarriers with an increasing effect of regularity and sphericity from star-shaped DDS to linear-based ones. • MTZ crystallises in all investigated herein systems reducing the glass transition temperature of the binary mixture significantly. • Synthesised linear-based DDS is the most effective for MTZ entrapment. [ABSTRACT FROM AUTHOR]

In this article, we have addressed fundamental relationships between the chemical structure, intermolecular order, degree of the association and the dynamical properties, including the nature of dielectric response function, the variation of the glass transition temperature and the Kirkwood factor in three homologues phenyl derivatives of monohydroxy alcohols: 1-phenyl-2-butanol, 4-phenyl-1-butanol, and 4-phenyl-2-butanol. Dielectric data supported by infrared and diffraction investigations allowed us to certify that the Debye relaxation can be detected not only in aliphatic but also aromatic monohydroxy alcohols, suggesting its universal character, irrespectively of the chemical structure and steric hindrance. Moreover, we discovered that besides water, 4-phenyl-1-butanol is a next H-bonded system that exhibits the Debye-like relaxation process and no sign of the diffraction pre-peak being a fingerprint of the medium-range intermolecular order. This finding alters our understanding of the molecular origin of the scattering pre-peak and Debye-type process in diffractograms and dielectric loss spectra, respectively. Finally, we revealed that the activation volume, which is a measure of the volume required for reorientational motions of molecules to occur, is the greatest for the system with the highest Kirkwood factor at the glass transition temperature. It means that except the static parameters characterising the size of the supramolecular associates, their morphology, and the degree of intermolecular order, also dynamical quantity related to the volume of relaxing supramolecular structures is required to understand the fluctuations in the Kirkwood factor, and generally, the behaviour of associating liquids at varying thermodynamic conditions. • Phenyl alcohols forming strong hydrogen bonds. • Main contribution to dielectric loss peak in phenyl alcohols due to Debye relaxation. • Debye relaxation universal in aliphatic and aromatic monohydroxy alcohols. • Debye mode in associating, hydrogen-bonded liquids with no diffraction pre-peak. • Static and dynamic parameters determining the molecular dynamics. [ABSTRACT FROM AUTHOR]

In this paper, thermal and structural properties, as well as molecular dynamics of co-amorphous binary mixtures composed of itraconazole (ITZ) and four other active pharmaceutical ingredients (APIs) with antifungal activity (posaconazole (POS), ketoconazole (KET), fluconazole (FLU), and voriconazole (VOR)), have been investigated. Calorimetric measurements indicated that with increasing concentration of each excipient (EXC), the glass transition temperature and phase transition temperatures, related to the formation of nematic and smectic order, are affected in the binary systems. Comprehensive analysis of the enthalpy of isotropic-nematic transition and the temperature dependence of the order parameter, calculated from infrared data for selected mixtures, supported by the results of X-ray diffraction , enabled us to confirm the suppression of liquid crystalline (LC) ordering in ITZ by KET, FLU, and VOR. On the other hand, ITZ enforced the nematic-like molecular arrangement of POS. Further dielectric measurements revealed that the type of EXC and its content in the mixture have no impact on the ratio of α - and δ -relaxation times (τ α and τ δ , respectively) in ITZ. Moreover, it was shown that δ -process is more sensitive to the isotropic-nematic phase transition than the α -one, and the formation of the nematic phase in this API occurs at different τ α and τ δ , dependently on the type of EXC and its concentration in the mixture. Summarizing, the results of our studies are much different with respect to those reported previously by Kozyra et al. [Mol. Pharm. 15 (2018) 5192–5206] and by some of us [Kaminska et al. Eur. J. Pharm. Biopharm. 88 (2014) 1094–1104] for ITZ mixed with various polymers and acetylated maltose, respectively. This finding clearly indicates that there is a different impact of the low and high molecular weight excipients on the ability in the formation of LC phases in ITZ, which may have important implications for the further development of the formulations of this pharmaceutical. Unlabelled Image • The degree of spatial arrangement of ITZ molecules is affected in binary systems. • The smectic ordering in ITZ is being suppressed by POS, KET, FLU and VOR. • In the ITZ-POS binary mixture, ITZ enforces the molecular (nematic) order of POS. • Results of our studies are in contrast to those reported for ITZ-polymer systems. [ABSTRACT FROM AUTHOR]