Search

In this brief, the nanosatellite rendezvous and docking problem is tackled. It was never attempted for small spacecraft, as critical technologies, such as six-degree-of-freedom (DoF) micropropulsion systems, have only recently become available due to advances in MEMS. The typical level of noise in nanosatellites’ sensors and actuators combined with the dynamics uncertainties, low actuation capabilities, and reliability requirements makes the use of robust control appropriate. The system is described by a linearized rotation/translation, six DoFs, and coupled dynamics, including fuel sloshing. An H∞ controller is first designed, in which robust stability and performance are assessed using structured singular values. The controller robustness is then improved using μ-synthesis. Nonlinear Monte Carlo simulations for both controllers, including realistic sensors and actuators models, are provided allowing a thorough assessment of the complete guidance, navigation and control (GNC). The sought GNC schemes are shown to be robust to the modeled uncertainties and to satisfy the docking requirements. [ABSTRACT FROM AUTHOR]

This paper stresses the lack of attention paid to the geographical definitions of cities in LUTI models as one key detrimental aspect to transferring and generalising LUTI results. First, the argumentation develops from a meta-analysis of peer-reviewed publications about LUTI applications in European cities. We show that most authors do not assess findings against potential geographical biases. Second, theoretical simulations are conducted withUrbanSimapplied to a synthetic urban area. By varying the geographical limits of the system and population endowments, our simulations confirm that the absence of control on city delineation weakens the results. Finally, the paper suggests methodological guidelines to improve the comparability of LUTI applications and push forward their theoretical agenda. [ABSTRACT FROM PUBLISHER]

Here we present first-order results detailing the Anatolian crustal from receiver function analysis of data from approximately 300 stations within Turkey. Seismic data from the Kandilli Observatory array (KOERI; KO), the National Seismic Network of Turkey (AFAD-DAD; TU) and available IRIS data from the Northern Anatolian Fault experiment (YL) for the period between 2005 and 2010 is analysed. We calculate receiver functions in the frequency domain using water-level deconvolution. The results are analysed using a combination of H–K stacking and depth stacking to determine robust Moho conversion depths and VP/Vs ratios across Anatolia. We detect a deep Moho in eastern Anatolia of up to ∼55 km, a generally normal Moho in Central Anatolia of ∼37–47 km and a thinned Moho in western Anatolia and Cyprus of ∼30 km. The VP/Vs ratio across the Anatolian Plate is generally slightly elevated; regions of extremely high VP/Vs ratio (>1.85) can be associated with recent volcanism in eastern and central Anatolia. High VP/Vs ratio measurements (>1.85) in western Anatolia may be indicative of partial melt in the lower crust associated with regional extension. [ABSTRACT FROM AUTHOR]

Background, aim, and scope The development of robust and up-to-date generic life cycle inventory data for materials is absolutely crucial for the LCA community since many LCA studies rely on these generic data about materials. LCA databases and software usually include within their package such generic LCI datasets. However, in many cases, the quality of these data is poor while the methodology and the models used for their development are rarely accessible or transparent. This paper presents the development of robust European LCI datasets for the production of primary and recycled aluminium ingots and for the transformation of aluminium ingot into semi-finished products, i.e. sheet, foil and extrusion. Materials and methods The environmental data have been collected through an extensive environmental survey, organised among the European aluminium industry, focusing on the year 2005 and covering EU27 countries as well as EFTA countries (Norway, Iceland and Switzerland). From this survey, European averages, i.e. foreground data, have been calculated for the direct inputs and outputs of the various aluminium processes. Using the GaBi software, the foreground data have been combined within LCI models integrating background LCI data on energy supply systems, ancillary processes and materials. For the primary aluminium production (smelters), a specific model for the electricity production has been developed. The methodology for the data consolidation and for the development of the various models is explained as well as the main differences between the new modelling approach and LCI models used in the past. An independent expert has critically reviewed the entire LCI project including data collection, models development, calculation of LCI data and associated environmental indicators. Results As confirmed by the critical review, the new LCI datasets for aluminium ingot production and transformation into semi-finished products have been developed though a robust methodology in full accordance with ISO 14040 and 14044. Most significant environmental data and LCI results are reported in this paper with an emphasis on energy use and the major emissions to air. The full environmental report, including the critical review report and the calculation of environmental indicators for a pre-set of impact categories, is available on the website of the European Aluminium Association (EAA 2008).… [ABSTRACT FROM AUTHOR]