Search

With the advancement of internet of things and wireless sensing technology, the need for personnel track and position monitoring are greatly increasing. Commercial global positioning system (GPS) and Global system for mobile communications (GSM) position methods cannot meet the demand for low power consumption and three‐dimensional indoor position monitoring. Herein, a self‐powered position monitoring system (SPMS) based on an insole‐type wearable triboelectric nanogenerator (IW‐TENG) and Bluetooth beacon for human kinetic energy harvesting and sustainable position monitoring is proposed. The SPMS consists of an insole‐type wearable triboelectric nanogenerator, an energy management module (EMM), and a Bluetooth low energy (BLE) beacon module. Benefitting from the multilayers structure, a maximum energy of 120 µJ per step can be harvested by the IW‐TENG with EMM for a typical adult. By every 3–4 steps, SPMS can transmit Bluetooth signals to obtain the location information. A single BLE signal transmission consumes only 136 µJ, and the transmission distance can reach 100 m. The SPMS is applied to intelligent attendance in office rooms and shows great prospects in intelligent navigation and trajectory tracking in local area network. [ABSTRACT FROM AUTHOR]

To meet the great need for distributed and sustainable power sources, mechanical energy in the environment is widely used for electricity generation. Based on the coupling effect of triboelectrification and electrostatic induction, triboelectric nanogenerator (TENG) as an innovative energy technology has advantages of collecting fluctuating amplitude and low-frequency mechanical energy. In this paper, a leaf-shaped TENG has been demonstrated to harvest multiple ambient mechanical energy. By the characterization with different mechanical energy sources, the leaf-shaped TENG has been proven as an effective tool to scavenge wind, vibration, and falling raindrop energy. Furthermore, based on numerous leaf-shaped TENGs, a leaf-shaped TENG tree has been developed, which can be used for continuous collection of environmental mechanical energy at large-scale. This paper has first exhibited a conformal structure for simultaneously harvesting various mechanical energy, which has bright potentials in environmental monitoring, Internet of things, and wireless sensor networks. [ABSTRACT FROM AUTHOR]

[Display omitted] • A stretchable electret achieves high surface charge and long charge stability. • A stretchable electret-based TENG achieves high charge density (0.2 mC m−2). • A power management module enhances power storage efficiency of the TENG. • The self-charging system provides a stable power supply for wearable electronics. Stretchable power sources capable of accommodating large deformations are urgently demanded for various stretchable and wearable electronics. In this work, we report a stretchable electret-based triboelectric nanogenerator (SEB-TENG) consisting of elastomeric electret as electrification materials and organo-hydrogels as electrodes. The electret elastomer, prepared by uniformly dispersing SiO 2 nanoparticles in the elastomer matrix and thermally injecting static charges, obtains a high surface potential, high tensile strain (796%), and long stability. Then, the SEB-TENG device also achieves high stretchability (423%) and high charge density (0.2 mC m−2). Furthermore, a power management module (PMM) is designed to maximize the energy utilization of the SEB-TENG. The integrated self-charging system can be sufficiently used to constantly power a watch, or charge a Li-ion coin cell which subsequently provides sustainable power supplies to a digital thermometer. This work provides a viable approach to simultaneously achieve high output performances and high stretchability of integrated power sources. [ABSTRACT FROM AUTHOR]

The tribovoltaic effect can convert semiconductor interfacial frictional mechanical energy into direct current (DC) electricity, but the flexibility and durability of semiconductor materials limit its application in wearable electronic. Herein, a robust flexible textile tribovoltaic nanogenerator is presented based on a 2D dynamic heterojunction of 2H‐MoS2/Ta4C3 (MTNG). During the friction process, a built‐in electric field (Eb) and an additional interfacial electric field (ECE) are generated in a continuous dynamic contact of 2H‐MoS2/Ta4C3, and through the 2H‐MoS2/Ta4C3 dynamic heterojunction, a significant number of electron‐hole pairs are excited and move directionally to generate a DC. The influences of mechanical pressure and sliding speed on output performance of MTNGs are systematically investigated. The MTNGs deliver excellent output power density (39.15 mW m2) and outstanding robustness (43 000 cycles). Ten MTNGs can be connected in series to obtain a DC voltage of 3.3 V and in parallel to obtain a DC current of 75 µA. Furthermore, the MTNGs can effectively power a variety of commercial electronic watches and calculators by harvesting human kinetic energy. A 2D dynamic heterojunction 2H‐MoS2/Ta4C3 DC nanogenerator is described and offers a workable option for the creation of flexible DC power sources and self‐powered wearable electronics. [ABSTRACT FROM AUTHOR]

[Display omitted] • H-SiO 2 and PF as fillers to improve the dielectric properties of PFS films. • The performance of TENGs delivered an enhancement by 13 times. • Multiple nanoscales is more favorable to achieve high performance of TENGs. Triboelectric nanogenerators (TENGs), capable of harvesting distributed energy from the environment, have provided a viable solution for self-powered wearable electronics. However, their low power density and susceptibility to contamination still severely limit their practical application. Herein, we reported a "two-step" strategy to implement a waterproof self-powered wearable electronic device based on TENG. Firstly, Perfluoropolyether (PF) and hollow hierarchical silica (H-SiO 2) as fillers significantly improve the dielectric properties of polydimethylsiloxane (PDMS) composite films (PFS films) through polarization effect. Then the nano bumps of 10–30 nm are created on the surface of the films by surface etching, the bumps can increase the contact area of TENG. The voltage of TENG is improved from ∼ 67 V to ∼ 910 V and the current is improved from ∼ 1 μA to ∼ 25 μA. What's more, the investigation of the surface structure of the PFS composite films by Atomic Force Microscope (AFM) revealed that the synergistic combination of multiple nanoscales (10–30 nm, 60–80 nm, 300–500 nm) is more favorable to achieve high performance of TENG. The surface structure composed of multiple nanoscales endows PFS with excellent superhydrophobicity. The PFS films remained fine performance after 40,000 drops of water and 90 days. This work achieves high performance and water resistance of TENG, demonstrating great potential in the field of self-powered wearable electronic devices. [ABSTRACT FROM AUTHOR]

Based on the coupling effect of contact electrification and electrostatic induction, the triboelectric nanogenerator (TENG) as an emerging energy technology can effectively harvest mechanical energy from the ambient environment. However, due to its inherent property of large impedance, the TENG shows high voltage, low current and limited output power, which cannot satisfy the stable power supply requirements of conventional electronics. As the interface unit between the TENG and load devices, the power management circuit can perform significant functions of voltage and impedance conversion for efficient energy supply and storage. Here, a review of the recent progress of switching power management for TENGs is introduced. Firstly, the fundamentals of the TENG are briefly introduced. Secondly, according to the switch types, the existing power management methods are summarized and divided into four categories: travel switch, voltage trigger switch, transistor switch of discrete components and integrated circuit switch. The switch structure and power management principle of each type are reviewed in detail. Finally, the advantages and drawbacks of various switching power management circuits for TENGs are systematically summarized, and the challenges and development of further research are prospected. [ABSTRACT FROM AUTHOR]

A series of direct‐current tribovoltaic nanogenerators (TVNGs) with high current density have been developed for energy harvesting and mechanical sensing recently, but the lead wires that need to be connected to two relatively moving parts have greatly restricted the application of TVNG. Herein, a freestanding‐mode TVNG (FTVNG) is proposed based on metal, p‐type silicon (p‐Si), and n‐type silicon (n‐Si). As the freestanding part of metal simultaneously rubs against p‐Si and n‐Si, opposite direct current (DC) outputs can be generated, thus forming a DC output from p‐Si to n‐Si in the external circuit. Resulting from the distinctive structure, FTVNGs are applicable for harvesting energy from moving objects without attached wires. Additionally, by using steel needles to precisely control the actual contact area, the electrical output characteristics and influence laws of the tribovoltaic effect under different working parameters such as area and speed are studied. Moreover, FTVNG is integrated into the traditional rolling bearing as a triboelectric bearing, realizing energy recovery from the rotational motion of mechanical parts and speed sensing, which demonstrates the great application potential of TVNG in basic components and parts. [ABSTRACT FROM AUTHOR]

With the extensive application of wireless sensing nodes, the demand for sustainable energy in unattended environments is increasing. Here, we report a self-powered and autonomous vibrational wake-up system (SAVWS) based on triboelectric nanogenerators and micro-electromechanical system (MEMS) switches. The energy triboelectric nanogenerator (E-TENG) harvests vibration energy to power the wireless transmitter through a MEMS switch. The signal triboelectric nanogenerator (S-TENG) controls the state of the MEMS switch as a self-powered accelerometer and shows good linearity in the acceleration range of 1–4.5 m/s2 at 30 Hz with a sensitivity of about 14.6 V/(m/s2). When the acceleration increases, the S-TENG turns on the MEMS switch, and the wireless transmitter transmits an alarm signal with the energy from E-TENG, using only 0.64 mJ. Using TENGs simultaneously as an energy source and a sensor, the SAVWS provides a self-powered vibration monitoring solution for unattended environments and shows extensive applications and great promise in smart factories, autonomous driving, and the Internet of Things. [ABSTRACT FROM AUTHOR]

Ocean waves are one of the most promising renewable energy sources for large‐scope applications. Recently, triboelectric nanogenerator (TENG) network has been demonstrated to effectively harvest water wave energy possibly toward large‐scale blue energy. However, the absence of effective power management severely restricts the practicability of TENGs. In this work, a hexagonal TENG network consisting of spherical TENG units based on spring‐assisted multilayered structure, integrated with a power management module (PMM), is constructed for harvesting water wave energy. The output performance of the TENG network is found to be determined by water wave frequencies and amplitudes, as well as the wave type. Moreover, with the implemented PMM, the TENG network could output a steady and continuous direct current (DC) voltage on the load resistance, and the stored energy is dramatically improved by up to 96 times for charging a capacitor. The TENG network integrated with the PMM is also applied to effectively power a digital thermometer and a wireless transmitter. The thermometer can constantly measure the water temperature with the water wave motions, and the transmitter can send signals that enable an alarm to go off once every 10 s. This study extends the application of the power management module in the water wave energy harvesting. [ABSTRACT FROM AUTHOR]

The triboelectric nanogenerator (TENG) is a new energy technology that is enabled by coupled contact electrification and electrostatic induction. The conventional TENGs are usually based on organic polymer insulator materials, which have the limitations and disadvantages of high impedance and alternating output current. Here, a tribovoltaic effect based metal–semiconductor direct‐current triboelectric nanogenerator (MSDC‐TENG) is reported. The tribovoltaic effect is facilitated by direct voltage and current by rubbing a metal/semiconductor on another semiconductor. The frictional energy released by the forming atomic bonds excites nonequilibrium carriers, which are directionally separated to form a current under the built‐in electric field. The continuous average open‐circuit voltage (10–20 mV), short‐circuit direct‐current output (10–20 µA), and low impedance characteristic (0.55–5 kΩ) of the MSDC‐TENG can be observed during relative sliding of the metal and silicon. The working parameters are systematically studied for electric output and impedance characteristics. The results reveal that faster velocity, larger pressure, and smaller area can improve the maximum power density. The internal resistance is mainly determined by the velocity and the electrical resistance of semiconductor. This work not only expands the material candidates of TENGs from organic polymers to semiconductors, but also demonstrates a tribovoltaic effect based electric energy conversion mechanism. [ABSTRACT FROM AUTHOR]

A compact, springless, easy-to-process kirigami-inspired TENG (KI-TENG) is developed. The frequency responses of the KI-TENG under the influence of mass, acceleration, and initial distance are investigated in detail to optimize its structural design. Moreover, the TENG coupled with the kirigami structure could collect ultra-wide-band vibration energy and as a sensor measuring acceleration. [Display omitted] • A compact and springless kirigami-inspired TENG (KI-TENG) is developed. • The frequency response characteristics of the KI-TENG are investigated. • The KI-TENG can harvest ultra-wide-band vibration energy from 2 to 49 Hz. • The output of the KI-TENG at different vibration tilt angles is explored. • The KI-TENG can effectively monitor acceleration changes from 1 to 9 m/s2. Triboelectric Nanogenerators (TENGs) based on spring-assisted structures play a central role in scavenging vibrational energy that is widely available in the natural environment. However, they suffer from difficulties in adjusting the stiffness and bonding the springs to the triboelectric layer. Here, a kirigami-inspired TENG (KI-TENG) with a kirigami structure is demonstrated, which can be used as an ultra-wide-band vibrational energy harvester and self-powered acceleration sensor. The triboelectric layer of the KI-TENG can be easily processed into the kirigami structure with one or two-degree-of-freedom by laser cutting technology. The frequency responses of the KI-TENG under the influence of mass, acceleration, and initial distance are investigated in detail to optimize the structural design. With optimized structural parameters, the KI-TENG can not only harvest broadband vibration energy from 2 to 49 Hz in vertical vibration state but also obtain high output performance over a wide frequency range in horizontal vibration state. Moreover, the KI-TENG can be used as a sensor measuring acceleration from 1 to 9 m/s2. This work demonstrates a compact TENG coupled with the kirigami structure for energy harvesting and active sensing, which has great prospects in intelligent plants, artificial intelligence, and the internet age. [ABSTRACT FROM AUTHOR]