Search

Angle log-periodic meander line microstrip radial sheet beam traveling-wave tube is one kind of novel minimized vacuum device with low beam voltage. To generate and focus the radial sheet electron beam, a novel radial divergent sheet beam electron optical system, including the tractable radial sheet electron beam gun and miniaturized and feasible radial small tunable periodic cusped magnetic focusing system, is proposed in this paper. The fan-shaped radial sheet beam is emitted from the cylindrical surface cathode, compressed in axial direction, and confined in azimuthal direction by the focusing electrode. Simulation results show that the total emission of the angular radial sheet beam gun is 51.2 mA with the dimensions of 0.26~\text mm \times 8 ° under the voltage of 1.7 kV, and the fan-shaped radial sheet beam can totally pass through the fan-shaped drift tunnel under the magnetic field. The experimental results are good in agreement with the simulation results. The tested angular radial sheet beam transmission efficiency is >90% in an 18.8-mm-length beam tunnel with the fill factor of 50%. [ABSTRACT FROM PUBLISHER]

In this paper, a novel small tunable periodic cusped magnet (NSTPCM) system is proposed for the purpose of realizing low voltage, big current sheet electron beam propagation in a long distance in engineering, which is composed of a series of position-fixed magnet blocks in alignment and freely sliding staggered pole pieces. This kind of NSTPCM not only generates higher magnetic field in the axial direction but also realizes more convenient adjustment of magnetic field in the transverse direction. This NSTPCM system has been successfully applied in a Ka-band sheet electron beam staggered double vane traveling wave tube. The tested sheet beam transmission efficiency is $>93$ % in a 112.7-mm-length slow-wave structure under the condition of beam voltage 24.3 kV and beam current 0.8 A. Moreover, the measured output power is $>75$ W in the range from 33 to 37.5 GHz, and the maximum output power is 128 W at 34 GHz. This paper provides the foundation for the development of sheet electron beam vacuum devices. [ABSTRACT FROM PUBLISHER]

In this paper, a wideband 220-GHz sheet-beam traveling-wave tube (TWT) based on staggered double vane slow-wave structure (SWS) is investigated. A novel method of loading the attenuator into the SWS for suppressing backward wave oscillation is proposed. In addition, a novel focusing electrode of the sheet beam gun is carried out in this paper, which is a whole structure but divided into two parts artificially, one is used to compress the electron beam in $X$ -direction and the other is used to compress the electron beam in $Y$ -direction. In addition, a novel anode is redesigned to reduce the defocusing effect caused by the equipotential surfaces. A nonuniform periodically cusped magnet is used for focusing the sheet electron beam, which is predicted to exhibit 100% beam transmission efficiency in a 75-mm length drift tube. The high-frequency characteristics of the SWS and the beam-wave interaction are also studied. The results reveal that the designed TWT is expected to generate over 78.125-W average power at 214 GHz, and the 3-dB bandwidth is 31.5 GHz, ranging from 203 to 234.5 GHz. [ABSTRACT FROM PUBLISHER]

A new kind of radial convergent sheet beam electron optical system, which can be used in low voltage Ka-band radial electron devices, is studied in this paper, including the beam production, transmission, and focus. A novel radial high perveance electron gun is proposed, and its volt-ampere characteristics are obtained by means of simulation. The focusing system using permanent magnet rings is put forward, by which a radial uniform magnetic field can be obtained. With the electron gun and focusing system, a 1600 V, 8 A, and 0.04-mm thickness radial convergent sheet beam was produced, and the simulation result shown that it can pass through a 16-mm \(\times 0.06\) -mm radial channel 100%. [ABSTRACT FROM PUBLISHER]

A novel electron-optical system (EOS) for ${G}$ -band traveling-wave tubes (TWT) is investigated by simulation and verified by experiment. The EOS includes a sheet beam electron gun, a tunable periodic cusped magnetic focusing (TPCMF), and a collector. An elliptical focus electrode (FE) featuring a simple geometry and easy fabrication is utilized to compress the pencil beam into the sheet beam with a cross section of 0.4 mm $\times0.1$ mm. The electron gun with a cylindrical cathode of 0.8 mm diameter generates the sheet beam with voltage of 22 kV and current of 115 mA. Based on the sheet beam electron gun, the TPCMF with easy assembly and compact size is then proposed. The experimental results show that the beam transmission is 92.1% within a beam tunnel (its length 21.2 mm and cross section 0.8 mm $\times0.15$ mm). The EOS is suitable for ${G}$ -band TWT. [ABSTRACT FROM AUTHOR]

We have theoretically investigated the transport of a sheet electron beam focused by a uniform axial magnetic field in a metamaterial-loaded waveguide. A theoretical model has been proposed to analyze the sheet electron beam transport. In this model, we have used CST simulations to obtain the mean potential on the metamaterial as the boundary condition. According to the boundary condition, the space-charge electric field and the beam curling have been theoretically analyzed. It is found that the beam curling can be greatly reduced by decreasing the spacing between the metamaterial and the sheet electron beam. This model is verified using the CST simulations. This paper can pave the way for developing brand new metamaterial-based vacuum electron devices with a sheet electron beam. [ABSTRACT FROM AUTHOR]