Search

Nowadays, what captures consumers' primary attention is how to purchase electric vehicles with long range and desirable price. Lightweight construction stands as one of the most effective approaches for prolonging range and lowering costs. As a consequence, it is particularly imperative to undertake lightweight design optimization for the battery bracket of new energy vehicles by applying 3D printing technology. To actualize this goal, Rhino software was initially employed for 3D modeling to design the battery bracket system for a pure electric vehicle in China. Subsequently, topology optimization design of the battery bracket was carried out by adopting Altair Inspire software. Last but not least, manufacturing and assembly inspection were completed using a 3D printer. The results show that the maximum displacement of the battery lower tray bracket after topology optimization is 3.20 mm, which is slightly higher than before, but still relatively small. The maximum Mises equivalent stress rose to 240.7 MPa post-optimization, but brought about a uniform stress distribution at the bottom of the bracket. In comparison, the minimum factor of safety met design requirements at 1. The mass was lessened to 0.348 kg, representing a 49.2% decrease in comparison with pre-optimization levels. The 3D-printed bracket was fabricated by employing a 3D printer, thereby achieving the aforementioned mass abatement. The battery pack parts exhibited a bright surface with low roughness and no discernible warping or deformation defects. As revealed by the assembly results, the components of the battery pack bracket are tightly coordinated with each other, with no evident assembly conflicts, revealing that the dimensional accuracy and fit of the completed parts meet production requirements. These findings lay solid groundwork for the mass production of high-performance battery pack brackets. [ABSTRACT FROM AUTHOR]

Interest towards electric vehicle adoption is on the rise due to the lower running and maintenance cost it offers, along with zero tailpipe emissions. Range anxiety is one of the only concern that affects the adoption of electric vehicles. The state of charge of the traction battery pack has to be accurately determined and provided to the user to avoid range anxiety. Minute battery parameters has to be considered to improve the accuracy of the state of charge determination. In order to overcome the problem of range anxiety, an innovative strategy that takes into account how vibrations affect the performance of EV batteries is developed in this research. By doing this, the state of charge estimation precision is improved and thereby raises the driver's faith in electric vehicles. The impacts and vibrations felt on the traction battery pack during driving would lead to heat generation. The heat generated is found to be highest when the vibrations resonate at the natural frequencies of the traction battery pack. The natural frequency of the battery pack is considered when the battery is kept in the battery chamber of the two-wheeler electric vehicle. The vibrations at natural frequency produces heat which is accounted for when the state of charge is determined. To obtain accurate state of charge estimation, a Kalman filter-based approach is used. The Kalman filter-based estimation uses the conventional methods which are the open circuit voltage method and the Coulomb counting method to improve the estimation process along with the consideration of the heat component due to vibrations and impact. The vibration analysis is performed using MATLAB, while the state of charge determination is implemented in hardware and the Kalman estimation done using Python. The system is modelled on an electric two-wheeler platform and the testing is done to compare the state of charge accuracy of the open circuit voltage method, the Coulomb counting method and the Kalman filter-based estimation approach. The inclusion of the vibrational heat analysis for State of Charge estimation in the hardware testing of the electric two-wheeler provides an accurate state of charge value. [ABSTRACT FROM AUTHOR]

The transportation sector is under increasing pressure to reduce greenhouse gas emissions by decarbonizing its operations. One prominent solution that has emerged is the adoption of electric vehicles (EVs). As the electric vehicles market experiences rapid growth, the utilization of lithium-ion batteries (LiB) has become the predominant choice for energy storage. However, it is important to note that lithium-ion battery technology is sensitive to factors, like excessive voltage and temperature. Therefore, the development of an accurate battery model and a reliable state of charge (SOC) estimator is crucial to safeguard against the overcharging and over-discharging of the battery. Numerous studies have been conducted to address lithium-ion battery cell modeling and SOC estimations. These studies have explored variations in the number of RC networks within the model and different estimation methods. However, it is worth mentioning that the capacity of a single lithium-ion battery cell is relatively low and cannot be directly employed in electric vehicles. To meet the total capacity and voltage requirements for electric vehicles, multiple cells are typically connected in series or parallel configurations to form a battery pack. Surprisingly, this aspect has often been overlooked in previous research. To tackle this overlooked challenge, our study introduces a comprehensive battery pack model and an advanced Battery Management System (BMS). We then integrate these components into an electric vehicle model. Subsequently, we simulate the integrated EV-BMS model under the conditions of four different urban driving scenarios to replicate real-world driving conditions. The BMS that we have developed includes an Extended Kalman Filter (EKF)-based SOC estimation system, a mechanism for controlling coolant flow, and a passive cell-balancing algorithm. These components work together to ensure the safe and efficient operation of the battery pack within the electric vehicles. [ABSTRACT FROM AUTHOR]

The electric vehicles are not completely emission-free. The vehicles consume power and the power generation processes involve carbon emissions, resulting in indirect vehicle usage carbon emissions. A use-phase carbon emissions assessment can help electric vehicle designers and manufacturers analyze the onboard carbon footprint and mitigate vehicle-related carbon emissions through energy consumption optimization. In this article, we focus on the use-phase carbon footprint based on the energy losses in electric vehicle battery packs. A battery pack energy loss model is established to examine the carbon footprint of four main subsystems of the battery pack, including the energy storage system, thermal management system, and battery junction box. We use the proposed method to evaluate the battery pack use-phase carbon emissions in four different cities from four main continents. The results show that the highest emissions appear in Tokyo (436.2 kgCO 2) due to the relatively high greenhouse gas factor on the grid, the London has the lowest 207.5 kgCO 2 emissions due to the massive adoption of sustainable energy during power generation. With a similar high greenhouse gas factor, but Sydney shows lower emissions (347.5 kgCO 2) compared to Tokyo, which illustrates the closer the annual average temperature to the battery suitable operation range, the lower energy loss happens inside the battery pack due to the low thermal management load and resistance energy loss in the cells. This electric vehicle has the highest energy loss rate (20.8%) in New York, 343.6 kgCO 2 emissions, and the highest thermal management system energy losses show the high seasonal temperature difference causing the high thermal management load to maintain the battery temperature. The proposed method can be used for different battery pack configurations and vehicle uses, providing researchers with a robust and versatile use-phase carbon emissions assessment strategy. • A battery pack use-phase carbon footprint assessment strategy is proposed. • The carbon emissions for four battery pack subsystems are calculated. • Temperature has the greatest impact on the battery pack carbon emissions. [ABSTRACT FROM AUTHOR]