Search

Rubber magnetic composites were prepared by incorporation of barium ferrite in constant amount—50 phr into acrylonitrile-butadiene rubber. Dicumyl peroxide as the curing agent was used for cross-linking of rubber magnets alone, or in combination with four different types of co-agents. The main aim was to examine the influence of curing system composition on magnetic and physical-mechanical properties of composites. The cross-link density and the structure of the formed cross-links were investigated too. The results demonstrated that the type and amount of the co-agent had significant influence on cross-link density, which was reflected in typical change of physical-mechanical properties. The tensile strength increased with increasing amount of co-agents, which can be attributed to the improvement of adhesion and compatibility on the interphase filler-rubber due to the presence of co-agents. Magnetic characteristics were found not to be influenced by the curing system composition. The application of peroxide curing systems consisting of organic peroxide and co-agents leads to the preparation of rubber magnets with not only good magnetic properties but also with improved physical-mechanical properties, which could broaden the sphere of their application uses. [ABSTRACT FROM AUTHOR]

In the present work, rubber magnetic composites were prepared by incorporation of strontium ferrite into rubber matrices based on natural rubber (NR) and acrylonitrile butadiene rubber (NBR). The sulfur and peroxide curing systems were introduced in cross-linking of rubber matrices. The research was aimed at the evaluation of magnetic filler content and type of curing system on the cross-link density, physical–mechanical and magnetic properties of prepared composites. The relationship between the composition of elastomers and cross-link structure within the rubber matrices, formed by applying different curing systems, was under investigation through strain–stress behavior of tested materials. The achieved results showed that ferrite behaves as a reinforcing filler in peroxide-cured composites based on NR, and in both, sulfur as well as peroxide-cured composites based on NBR. The results also demonstrated that the cross-linking degree and the type of cross-link structure as well as the composition of rubber matrices, to a large extent, influence the property spectrum of tested composite systems. [ABSTRACT FROM AUTHOR]

Four types of peroxides in combination with two types of co-agents were used as cross-linking agents for the preparation of rubber compounds based on natural rubber. The effects of Type I and Type II co-agents on cross-linking and physical-mechanical properties of vulcanizates were investigated. The correlation between mechanisms of the interaction of co-agents with the rubber matrix in relation to the characteristics of tested systems was discussed. The results showed that the Type I co-agent influenced the rate and the state of cure. Physical-mechanical properties were improved by addition of the Type I co-agent. By contrast, the Type II co-agent had no contribution to the rate and state of cure. Moreover, physical-mechanical properties of vulcanizates deteriorated in the presence of this type of co-agent. [ABSTRACT FROM AUTHOR]

Copyright of Polimery is the property of Industrial Chemistry Research Institute and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)