Search

This study investigated the friction and wear properties of high‐strength polyacrylonitrile (HS‐PAN)‐, high‐modulus polyacrylonitrile (HM‐PAN)‐, and high‐modulus pitch (HM‐pitch)‐based carbon fiber‐reinforced polymer matrix composites (CFRPs) with silicon carbide (SiC) nanoparticles. The fiber orientation of the CFRP specimens was set as 8‐ply unidirectional laminates, denoted as [0]8. Ball‐on‐disk (cyclic) wear testing was accompanied by laser, digital, and scanning electron microscope observations. For the HS‐PAN CFRP, the coefficient of friction and wear resistance were the highest among the HM‐PAN and HM‐pitch CFRPs and wear resistance was improved by the addition of SiC‐nanoparticles. Furthermore, there was no significant enhancement of wear resistance for the SiC‐nanoparticle‐filled and nanoparticle‐unfilled HM‐PAN CFRP. The wear resistance was improved by adding SiC‐nanoparticles for the HM‐pitch CFRP. [ABSTRACT FROM AUTHOR]

ABSTRACT The polyimide (PI) composites reinforced with carbon fibers, glass fibers, and aramid fibers were fabricated by means of a hot-press molding technique and irradiated by electron or proton for a certain time. The friction and wear behavior after irradiation, sliding against GCr15 steel balls, were evaluated in a ground-based simulation facility using ball-on-disk tribosystem. The change of the chemical composition of the radiated surface was examined by X-ray photoelectron spectroscopy. The worn morphologies and radiated surfaces of the materials were observed by scanning electron microscope to reveal the wear mechanism. Experimental analysis indicated that the chemical composition of the materials changed and an irradiated layer was formed at the surface. This irradiation layer had an important effect on the friction and wear behavior of the PI composites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014, 131, 40774. [ABSTRACT FROM AUTHOR]