Search

This study investigated the friction and wear properties of high‐strength polyacrylonitrile (HS‐PAN)‐, high‐modulus polyacrylonitrile (HM‐PAN)‐, and high‐modulus pitch (HM‐pitch)‐based carbon fiber‐reinforced polymer matrix composites (CFRPs) with silicon carbide (SiC) nanoparticles. The fiber orientation of the CFRP specimens was set as 8‐ply unidirectional laminates, denoted as [0]8. Ball‐on‐disk (cyclic) wear testing was accompanied by laser, digital, and scanning electron microscope observations. For the HS‐PAN CFRP, the coefficient of friction and wear resistance were the highest among the HM‐PAN and HM‐pitch CFRPs and wear resistance was improved by the addition of SiC‐nanoparticles. Furthermore, there was no significant enhancement of wear resistance for the SiC‐nanoparticle‐filled and nanoparticle‐unfilled HM‐PAN CFRP. The wear resistance was improved by adding SiC‐nanoparticles for the HM‐pitch CFRP. [ABSTRACT FROM AUTHOR]

Abstract: In this work the effect of fiber orientation on the mechanical and tribological properties of SCF (short carbon fibers)/PTFE (poly-tetra-fluor-ethylene)/graphite filled PEEK (poly-ether-ether-keton) composites was studied. The composites were manufactured by using injection molding technique. Mechanical and tribological experiments were conducted to measure the compression modulus, compression strength and wear resistance. A correlation of the tribological and mechanical properties considering different fiber orientations was studied. Additionally to the fiber orientation influence, the wear resistance under low and high pressures was examined. The results analyses, based on scratch experiments and scanning electron microscope (SEM) inspections explain how the fiber orientation influences the mechanical performance and the tribological properties of the considered materials. [Copyright &y& Elsevier]

Abstract: A composite with continuous carbon fibers (CF) (80% by vol.) and high performance thermoplastic polyetherimide (PEI) matrix was developed and evaluated for various mechanical properties as a function of fiber orientation angle (0°, 30°, 45°, 60° and 90°). It was observed that Young''s modulus, Poisson''s ratio, toughness and % strain decreased with the increase of fiber orientation angle with respect to loading direction. In-plane shear modulus was highest for fibers with 45°. Overall, unidirectional (UD) CF reinforcement enhanced all strength properties of PEI significantly. Composites with fibers in 0° (parallel to loading direction) proved best in almost all the properties. Tribological evaluation in abrasive wear mode under different loads and fiber orientations indicated that coefficient of friction (μ) and specific wear rate (K 0) decreased with load, in general. Comparatively low specific wear rate (K 0), (in the order of 0.71×10−9 m3/Nm) was observed for 0° fiber orientation, while fibers in 90° showed almost three times higher wear rate. Overall fiber reinforcement in 0° orientations proved beneficial from both strength and tribological performance point of view. SEM proved useful to correlate wear rate with surface topography. [Copyright &y& Elsevier]