Search

Abstract: The oxygen reduction reaction has been investigated on double-walled carbon nanotube (DWCNT) modified glassy carbon (GC) electrodes in acid and alkaline media using the rotating disk electrode (RDE) method. The surface morphology and composition of DWCNT samples was examined by transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). Aqueous suspensions of DWCNTs were prepared using Nafion and non-ionic surfactant Triton X-100 as dispersing agents. The RDE results indicated that the DWCNT modified GC electrodes are active catalysts for oxygen reduction in alkaline solution. In acid media DWCNT/GC electrodes possess poor electrocatalytic properties for O2 reduction which indicates lack of metal catalyst impurities in the DWCNT material studied. The oxygen reduction behaviour of DWCNTs was similar to that of multi-walled carbon nanotubes (MWCNTs) observed in our previous studies. [Copyright &y& Elsevier]

Abstract: In this paper, the electrochemical reduction of oxygen has been studied on gold nanoparticle/multi-walled carbon nanotube (AuNP/MWCNT) modified glassy carbon (GC) electrodes in 0.5M H2SO4 using the rotating disk electrode (RDE) method. The AuNP/MWCNT catalysts were prepared by chemical deposition of AuNPs onto MWCNTs spontaneously grafted with 4-nitrophenyl groups. The composite electrode was characterised by transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and cyclic voltammetry (CV). The oxygen reduction behaviour of these electrodes was compared with that of a bulk gold electrode. The AuNP/MWCNT catalyst showed a pronounced electrocatalytic activity towards O2 reduction in acid media. The half-wave potential of O2 reduction on the AuNP/MWCNT catalyst shifted ca 80mV to more positive potentials as compared to that of a polished Au electrode. The kinetic parameters of oxygen reduction were determined and the specific activity of the hybrid electrode was slightly higher than that of the bulk Au electrode. [Copyright &y& Elsevier]

Abstract: The electrochemical response of 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS) on aryl-modified glassy carbon (GC) electrodes has been investigated. The electrochemical modification of GC surface with 4-nitrophenyl (NP) and 4-carboxyphenyl (CP) groups was performed using the diazonium reduction method. The 4-aminophenyl-modified GC electrodes were obtained by electroreduction of NP films. The surface coverage of aryl groups was altered by varying the number of potential scans during electrografting experiments. The electrochemical behaviour of ABTS was studied on bare and aryl-modified GC electrodes using cyclic voltammetry and the rotating disk electrode (RDE) methods. Electrochemical measurements were performed in acetate and phosphate buffers (pH=4–8) to study the effect of pH on the electron transfer process. The response of ABTS was independent of pH for bare GC and GC/NP electrodes (modified by 20 electrografting scans), whereas a slight pH-dependence was observed for other electrodes. The strongest blocking action was observed for the NP-modified GC electrodes of higher surface coverage and the lowest for reduced NP films (modified by a single electrografting scan). [Copyright &y& Elsevier]

Abstract: The oxygen reduction reaction has been investigated on acid-treated single-walled (SWCNT) and multi-walled carbon nanotubes (MWCNT) modified glassy carbon (GC) electrodes in acid media using the rotating disk electrode (RDE) method. Different acids were used for the carbon nanotube (CNT) purification. A systematic study was carried out to elucidate whether the metal catalyst impurities of CNTs play a role in the electroreduction of oxygen on the CNT modified GC electrodes. The surface morphology of the carbon nanotube samples was examined by transmission electron microscopy and the concentration of metal catalysts in the CNT materials was determined by energy dispersive X-ray spectroscopy. The acid-treated MWCNTs were also characterised by Raman and X-ray photoelectron spectroscopies. Aqueous suspensions of SWCNTs and MWCNTs used for GC surface modification were prepared in the presence of Nafion. The RDE results indicated that the acid-treated CNT modified GC electrodes are less active catalysts for oxygen reduction than as-received CNTs which could be explained by the absence of metal catalysts on the surface of purified CNTs. [Copyright &y& Elsevier]