Search

We present how harmful different wood extractives carried over to paper mill with unbleached softwood Kraft pulp are for the strength of packaging papers and boards. The investigations were done by simulating industrial papermaking conditions in laboratory-scale trials for handsheet production. It was found that fatty acids are the most relevant compounds in the carryover pitch extractives (CPEs), as they readily interfere in fiber–fiber bonding strength, control the properties of CPE micelles, and are furthermore the most abundant compounds. Addition of cationic starch improved strength and evened out the strength differences of handsheets with different CPE compounds. Oleic acid (unsaturated fatty acid) was an exception, as it was above average harmful for paper strength without cationic starch and also heavily impaired the functioning of cationic starch. As a whole, these findings demonstrate that fatty acids, especially unsaturated ones, are the most relevant CPE compounds contributing to the reduced efficiency of cationic starch and decreased strength of unbleached softwood Kraft paper. This makes the cleaning of process waters by precipitating CPEs on the pulp fibers harmful for paper strength.

The rapid economic growth and environmental concerns have led to high demands on paper and paper-based products in terms of variety, quantity, quality, and specialty. Enhancement and functionalization with additives are constantly required. Moving away from traditional petroleum-based additives, researchers have attempted to use “green” nanoadditives by introducing renewable environmentally friendly nanocellulose. This article studies the functions of nanocellulose as bio-additives (enhancer, retention and filtration reagent, and coating aid) in paper and paper products, and overviews the research development of nanocellulose-based additives and their applications in the paper industry for both efficient production and paper functionalization. The review shows that (1) a variety of nanocellulose-based bioadditives have been reported for various applications in paper and paper-based products, while commercially viable developments are to be advanced; (2) nanocellulose was mostly formulated with other polymer and particles as additives to achieve their synergistic effects; (3) major interests have concentrated on the nanocellulose in the specialty papers as representing more value added products and in the efficient utilization of recycled fibers, which remains most attractive and promising for future development. This report shall provide most useful database information for researchers and industries for paper recycling and enhancement, and paper-based products innovation and application.

The pulp and paper industry is highly energy-intensive. In mills that use chemical pulping, roughly half of the higher heating value of the cellulosic material used to manufacture the product typically is incinerated to generate steam and electricity that is needed to run the processes. Additional energy, much of it non-renewable, needs to be purchased. This review considers publications describing steps that pulp and paper facilities can take to operate more efficiently. Savings can be achieved, for instance, by minimizing unnecessary losses in exergy, which can be defined as the energy content relative to a standard ambient condition. Throughout the long series of unit operations comprising the conversion of wood material to sheets of paper, there are large opportunities to more closely approach a hypothetical ideal performance by following established best-practices.

Introduction. The Shchuchiy Bay is located in the western part of the skerry area of Lake Ladoga near the town of Priozersk. For almost 20 years, the bay has experienced an anthropogenic impact from the ingress of untreated wastewater from the Priozersk Pulp and Paper Mill (PPM). Systematic microbiological studies of the Shchuchiy Bay ecosystem were started in the middle of the 1970s by the Institute of Limnology of the Russian Academy of Sciences and continued after the PPM closure in 1986. Materials and methods. The ecosystem of the bay was studied in detail during the growing season of 2013–2014; periodic studies were carried out in 2015–2018. Retrospective data were also used for the analysis. Water samples were taken at four stations from the surface horizon. The following microbiological indicators were determined: the abundance of bacterioplankton and the percentages of various morphological types of bacterial cells. Results and discussion. A comparison of the quantitative level of development of the bacterial community in the bay in different periods showed a gradual decrease in the abundance of bacterioplankton as the anthropogenic impact weakened after the closure of the Priozersky PPM from 12.40 million cells ml–1 in 1987 to an average value of 2.62±1.03 million cells ml–1 in 2013–2018. A positive correlation was found between the concentration of bacteria and water temperature. The percentage of rod-shaped microorganisms in the water of the bay also decreased as the anthropogenic impact weakened from 73.4 % in 1987 to 53.1±7.6 % in 2013–2018, which indicated an improvement in water quality. Conclusion. A stable decrease in the abundance of bacteria from the level characteristic of highly polluted and eutrophic water bodies to the level characteristic of mesotrophic and mesotrophic-eutrophic water bodies is a reliable criterion for the restoration of the ecosystem of the Shchuchiy Bay to the state characteristic of similar bays of Lake Ladoga.

The pulp and paper industry is primarily dependent on fibrous wood for pulp and paper production. However, this over-dependence on fibrous wood poses serious environmental challenges such as the diminishing of the fibrous wood stocks, deforestation, emission of greenhouse gases, and global warming. Therefore, to mitigate these environmental challenges associated with its utilization for paper and pulp production, other sustainable raw material sources can also be considered for the production of paper and pulp. There are enormous benefits associated with the utilization of non-wood fibres as an alternative and sustainable raw materials source for the production of paper and pulp. These benefits have in the recent past prompted millers in China, India, Brazil, and the USA to consider the utilization of non-wood fibres in paper and pulp production. In Kenya, the pulp and paper industry is very much dependent on fibrous wood for production and the industry is yet to fully embrace the utilization of nonwood fibres for paper and pulp production. Further, the dependence on fibrous wood has contributed significantly to the decline of paper pulp and paper production, deforestation, and rise in paper importations due to insufficient raw material supplies. The importation of paper and pulp products has further led to the collapse of the paper industry in Kenya. The sector stands a chance of revival and vibrancy through the utilization of the abundant agricultural residues and feedstocks lying in the agricultural fields across the country. Similar experiences elsewhere have proved that the abundance of agricultural waste can be utilized for the production of paper and pulp due to their excellent fibre content for specialty papers, and easy pulpability. The agricultural residues are therefore considered a quintessential alternative and sustainable source of raw materials for the pulp and paper industry. Moreover, their utilization will mitigate environmental impacts such as deforestation, climate change, and pollution .

The paper presents a research on the disposal of the toxic waste of pulp and paper mill (sludge-lignin with the empirical formula CH1.51N0.05S0.03Cl0.01O0.54through its oxidation in supercritical water-oxygen fluid, including the case of using methane as a co-fuel. The experiments were carried out with a flow reactor of original design at a pressure of 25 MPa, temperature gradient along the vertical axis (from top to bottom: 390–600°C), and variation in the flow rate of the sludge-lignin (with the addition of NaOH, 1.6 wt %), oxygen, and methane. The experiments yielded data on the content of phenols in the water and the composition of the gaseous products collected at the outlet of the reactor versus the oxygen excess ratio. From these data, as well as the time dependences of the reactor wall temperature and the power of the ohmic heaters, it follows that using distributed supply of methane to compensate for the energy for heating of the reagents is preferable as compared with local inlet of methane to the upper part of the reactor. It has been shown that the addition of methane makes it possible to reduce the oxygen excess required for complete oxidation of the organic components of sludge-lignin.

This study optimizes a novel surfactant-assisted green liquor dregs (GLD) pretreatment of paper mill sludge (PMS), both of which are wastes from the kraft pulping industry, using a combined Response Surface Methodology (RSM) design. Optimized conditions give a maximal reducing sugar release of 16.38 g/L. A substantial reduction in heavy metals aluminum, chromium, cobalt, arsenic, lead, and copper after pretreatment illustrates the enhancement of substrate digestibility by reducing toxic elements. Separate hydrolysis and fermentation (SHF) and simultaneous saccharification and fermentation (SSF) for hydrogen production are assessed. SSF produced a hydrogen yield of 3.72 mL/g, displaying a 36.26% increase from pretreated PMS compared to SHF. These findings provide insights into possible methods of reducing process duration, energy input, and costs incurred with waste disposal within the paper industry. Furthermore, improved hydrogen yield using an SSF process demonstrates the potential beneficiation of pulp and paper GLD and PMS wastes.

Lean manufacturing (LM) is established as a best practice to improve the performance of manufacturing industries. Not all the manufacturing industries realize the benefits of LM practices specifically continuous process industries. The present research work is intended to study the advantages of implementing LM practices in an ethical paper industry which is a continuous production industry. Presently, the industry suffers with the problems such as lack of productivity, raw material wastes, underutilized resources, and lack of standard practices in the production. Gemba technique is adapted to record the information related to the present manufacturing environment. Based on the current state analysis, the feasible lean tools are selected and implemented such as 5S, Kaizen, and Total Productive Maintenance (TPM). The improvements have been noted as reduced tool change over time, reduced material wastes, effective utilization of resources and provide safety guidelines to workers and operations. The implications of these improvements increased the productivity also.

More than 50 billion disposable paper cups used for cold and hot beverages are sold within the United States each year. Most of the cups are coated with a thin layer of plastic — low density polyethylene (LDPE) — to prevent leaking and staining. While the paper in these cups is both recyclable and compostable, the LDPE coating is neither. In recycling a paper cup, the paper is separated from the plastic lining. The paper is sent to be recycled and the plastic lining is typically sent to landfill. In an industrial composting environment, the paper and lining can be composted together if the lining is made from compostable materials. Coating paper cups with a compostable performance material uniquely allows for used cups to be processed by either recycling or composting, thus creating multiple pathways for these products to flow through a circular economy. A segment of the paper converting industry frequently uses an extrusion grade of polylactic acid (PLA) for zero-waste venues and for municipalities with ordinances for local composting and food service items. The results among these early adopters reveal process inefficiencies that elevate manufacturing costs while increasing scrap and generally lowering output when using PLA for extrusion coating. NatureWorks and Sung An Machinery (SAM) North America researched the extrusion coating process utilizing the incumbent polymer (LDPE) and PLA. The trademarked Ingeo 1102 is a new, compostable, and bio-based PLA grade that is specifically designed for the extrusion coating process. The research team identified the optimum process parameters for new, dedicated PLA extrusion coating lines. The team also identified changes to existing LDPE extrusion lines that processors can make today to improve output. The key finding is that LDPE and PLA are significantly different polymers and that processing them on the same equipment without modification of systems and/or setpoints can be the root cause of inefficiencies. These polymers each have unique processing requirements with inverse responses. Fine tuning existing systems may improve over-all output for the biopolymer without capital investment, and this study showed an increase in line speed of 130% by making these adjustments. However, the researchers found that highest productivity can be achieved by specifying new systems for PLA. A line speed increase to more than 180% and a reduction in coat weight to 8.6 µm (10.6 g/m2 or 6.5 lb/3000 ft2) was achieved in this study. These results show that Ingeo 1102 could be used as a paper coating beyond cups.

The study aimed at the use of char produced during pyrolysis of mix plastic waste. It further focused on producing activated carbon from char and also found its efficacy as efficient adsorbent for treatment of pulp and paper mill wastewater. The activated carbon was characterized in comparison with raw char for their physical, surface and adsorptive properties. Batch type adsorption experiments were carried out using 100 ml wastewater to observe the individual effectiveness using five different variables such as adsorbent dose (0.25–2.0 g), pH (6–10), time (5–24 h), agitation speed (100–200 rpm) and temperature (30–50 °C) by keeping other variables constant which helped to find out the effective range of all the variables. The competency was evaluated on the basis of colour and lignin content of pulp and paper industry wastewater. Once the effective range of different variables was identified, the statistical analysis was conducted to monitor the mutual impact on the reduction in colour and lignin contents in wastewater. From the statistical design applied, the best result was obtained at activated carbon dose (1.25 g), pH (8.0), contact time (7 h), agitation speed (184 rpm) and temperature (40 °C). The study resulted in reduction of 96.48% in colour and 94.25% in lignin at optimized condition in comparison with 87.37 and 80.44%, respectively, at unoptimized conditions. A potential increase in reduction of 9.0% in colour and 14.0% in lignin content was achieved after optimization through statistical design that confirmed its usefulness.

A wide variety of biomass is available all around the world. Most of the biomass exists as a by-product from manufacturing industries. Pulp and paper mills contribute to a higher amount of these biomasses mostly discarded in the landfills creating an environmental burden. Biomasses from other sources have been used to produce different kinds and grades of biomaterials such as those used in industrial and medical applications. The present review aims to investigate the availability of biomass from pulp and paper mills and show sustainable routes for the production of high value-added biomaterials. The study reveals that using conventional and integrated biorefinery technology the ample variety and quantity of waste generated from pulp and paper mills can be converted into wealth. As per the findings of the current review, it is shown that high-performance carbon fiber and bioplastic can be manufactured from black liquor of pulping waste; the cellulosic waste from sawdust and sludge can be utilized for the synthesis of CNC and regenerated fibers such as viscose rayon and acetate; the mineral-based pulping wastes and fly ash can be used for manufacturing of different kinds of biocomposites. The different biomaterials obtained from the pulp and paper mill biomass can be used for versatile applications including conventional, high performance, and smart materials. Through customization and optimization of the conversion techniques and product manufacturing schemes, a variety of engineering materials can be obtained from pulp and paper mill wastes realizing the current global waste to wealth developmental approach.

Fraudulent papers from paper mills are a serious threat to the entire scientific community. Naunyn-Schmiedeberg’s Archives of Pharmacology has become the target of a massive attack of fraudulent papers originating from paper mills. This editorial highlights 20 important features we observed with paper mills and explains how the journal is responding to this serious threat to restore the integrity of science. Hopefully, this editorial is also helpful for editors of other scientific journals.

To provide an international standard for the safe management and operation of ships and for pollution prevention, the International Maritime Organization (IMO) introduced the International Safety Management (ISM) Code (adopted in 1993 and entered in force on 1st July 1998). The Code, through its guidelines and recommendations, provides seafarers (ship’s crew) the course of action for the safety and quality assurance process on ships. Traditionally a paper-based system, the ISM Code is now being digitalized in every aspect to streamline the processes to improve ship operations. This paper presents findings of a review of existing literature available on the world wide web to highlight areas of the Code that have been impacted by technology and the benefits that are being reaped. However, recent cyber attacks on ships and the maritime industry require a discussion on various implications associated with ships becoming increasingly reliant on technology and the advancing digital world. This paper highlights and explains the related implications and suggests strategies to address them.

This paper presents the research results that established the main technological conditions in the production of greaseproof paper, used as the packaging of dry food as the proportion of pulp types, the degree of the beating of pulp, the use of chemicals and oil and greaseproof resistant agent to the properties of the paper on a laboratory scale. At the same time, experimental production and technology conditions were regulated on a 3 ton/day capacity line. The paper quality produced is equivalent to the imported paper products of the same type which is consumed in the market: basis weight: 42.5 g/m2; tensile breaking length: MD (Machine Direction): 7,520 m, CD (Cross Direction): 3,740 m; tear index: MD: 6.8 mN.m2/g, CD: 5.4 mN.m2/g; burst index: 5.6 kPa.m2/g; Cobb60: 17.2 g/m2; KIT rating: 8; ensuring food safety and hygiene.

Cellulose triacetate (CTA) forward osmosis (FO) membrane from Hydration Technology Innovation (HTI), USA was tested in a locally fabricated FO system to concentrate synthetic and pulp and paper mill wastewater. The industry is among the 17 most polluted industries with intensive water consumption and wastewater generation (MoEFCC, Government of India). The CTA membrane was studied with deionized water as feed solution and 1 M NaCl as draw solution, which resulted into water flux of 5.8 L/m2h and reverse salt flux of 0.2 g/L. A concentration stepping method was used to determine the critical draw concentration with lignin solution as the model feed. There was no deviation in flux between the baseline (deionized water feed) and the lignin solution up to 1.5 M NaCl, but a marginal deviation (8% and 21% respectively at 2 M and 3 M) was seen thereafter. The average water flux after 24 h FO study with synthetic wastewater as feed solution (draw solution 2 M NaCl) was 8 L/m2h, and 80% water recovery. Similar study with pulp and paper wastewater as feed solution (draw solution of 1.5 M NaCl) was 5.4 L/m2h was with 62% water recovery. Lignin and COD rejection in pulp and paper mill wastewater was 90% and 64% respectively. The preliminary results indicate that FO is promising for water and lignin recovery from waste streams.

Paper and pulp mills generate substantial quantities of cellulose-rich sludge materials that are disposed in landfills at a large scale. For sustainability purposes, sludge materials can be bioprocessed to produce renewable fuels and useful chemicals. The enzymatic hydrolysis of cellulose is the process bottleneck that affects the conversion economics directly by using zero-cost raw materials. In order to study and optimize the process, the characteristics of the sludge raw materials should be first evaluated. In this work, sludge samples were obtained from paper mills located at different locations in Wisconsin and Minnesota. Part of the sludge samples was washed (de-ashed) with hydrochloric acid while the other part remained unwashed. The samples were subjected to multiple spectroscopic analyses techniques to evaluate the morphological properties of cellulose fibers and to estimate the total structural carbohydrate content. The results showed that the de-ashing process changed some fiber characteristics and cellulose crystallinity structure in all sludge samples. Sludge sample A (obtained from Kraft pulp and recycled paper mill region) showed a high percentage of fiber, with crystalline cellulose, compared to the other two sludge samples suggesting that sludge A is a valuable source to make value-added products. Aspen Plus mass and energy calculations performed in view of the ‘zero’ cost and the reliable supply of sludge raw materials producing 2 mol H2/mol glucose. Moreover, the results showed that extracting crystalline cellulose from these sludge samples is more profitable than crystalline cellulose made from the other lignocellulosic feedstocks. The results reported here showed that the utilization of these sludge materials would be an economically attractive and promising alternative for the production of hydrogen.

The aim of this review is to introduce the information concerning advanced technology of ink-jet printing regarding characteristics and ink-jet paper. It is believed that ink-jet paper having suitable liquid absorption characteristics and drying techniques are required to improve image quality on high-speed inkjet printing. Although the development of high quality ink-jet paper is important, the demand or the dual-purpose coated paper that can be used with offset and ink-jet printing is expected to increase for the time being. Meanwhile, it is important to get cost down and raise the productivity of the inkjet paper to secure competitiveness comparable to that of offset coated paper. For those objectives we think that the development of new technologies is required for pigment development, composition design of the coating ingredients, and rheological characteristics analysis of coating colors.

Objective. This study aims 1) to acquire new information on alternative conference formats, including in the field of Library and Information Science (LIS), which have arisen as a result of the COVID-19 pandemic and restrictions on physical communication; 2) to clarify the role of such a communication channel as Conference proceedings within the scientific ecosystem, as well as the concepts "proceedings paper" and "conference paper".Methods. Examining the new conference formats and special features of the Conference proceedings involved the content from the web-sites of international conferences in the field of LIS and related sciences, the analysis of subject-specific papers and data from the bibliographic and abstract databases such as Scopus and the Web of Science Core Collection (WoS).Results. It has been proven that over the year 2020 the online and hybrid events have become an alternative format of physical conferences. It has been confirmed that the Conference proceedings from the influential international conferences refer to the types of publications categorized as "high-quality papers". The peculiarity of LIS university researchers is that, in addition to studying problems focused only on the library activities, there is a need to conduct research into various subjects that are major for their institutions. Conference proceedings can be published as a book (a series of books), in a journal, or as a serial publication. Papers from them may be indexed by WoS (as "proceedings paper") and/or by Scopus (as "conference paper"); however, the impact factors of the publications themselves are not available in these databases.Conclusions. In the year 2020, the new pandemic reality, representing a circumstance of irresistible force, stimulated the flourishing of creative and technological solutions for online conferences. For international conferences, it is mandatory to publish the materials presented by their participants. Proceedings paper (conference paper) in journals are similar to standard journal articles in their structure but they have a less rigorous review process, they are published faster at a lower scientific impact (citation level).

Refereed/Peer-reviewed At a paper manufacturing mill (PML) that had been previously part of an integrated pulp (bisulphite) and paper mills industry, cyanobacterial blooms were observed in the mill’s aerated stabilization basin (ASB) ponds at about 3 years after pulping had been discontinued. This study aimed to determine the factors that led to bloom occurrences and potential control strategies applicable to the paper manufacturing mill’s, aerated stabilization basin system that discharges wastewaters into a coastal lake. Following discontinuation of pulping, the colour of the wastewaters reduced to low levels (~ 10 Hazen units or less), while the levels of nutrient remained potentially supportive of cyanobacteria growth with total phosphorus at ~ 0.1 mg/L and total nitrogen at > 2.5 mg/L. Incidences of blooms in the ABS were associated with preceding average monthly rainfalls and wind speeds being less (~ 44% and ~ 7%, respectively) and average direct sunlight hours being greater (~ 9%) than the long-term average values. Zinc was investigated for control of cyanobacteria as this metal is less toxic to aquatic organisms and microflora than copper algaecides. In laboratory culture trials, zinc was found to inhibit growth of M. aeruginosa (strain MIC338) and Pseudanabaena sp. when dosed at ~ 2.5 mg/L. The inhibition of cyanobacteria by zinc was found to vary between ASB pond samples which had different in situ chlorophyll a levels. This study found that the PML wastewaters investigated can be supportive of cyanobacterial growth to bloom levels after discontinuation of pulping processes and that zinc has potential as a cyanobacteria control agent.

The pulp and paper industry is a highly energy-intensive and water-consuming industry. This industry is known for the utilization of a wide range of raw materials, containing cellulose fibers (generally wood, recycled paper, and agricultural residues), for the production of various grades of paper. There are several processes involved in the conversion of raw materials to the paper product such as raw material preparation, pulping, pulp washing and screening, bleaching, stock preparation, papermaking and chemical recovery. All the processes are facing issues regarding process efficiency, product quality, energy & water consumption, and cost and environment. There is a need for further improvement and upgrading the technologies but the scale of operations, technological obsolesce and cost of implementing new technologies are some of the major issues. The main thrust areas of pulp and paper processing require major interventions in the adoption of green and clean technologies.

Our dependency towards wood has reduced the number of forests especially in Indonesia. Hence, many people tried to use another material as a replacement of wood. One of them is composite. Department of Industrial Engineering Universitas Sebelas Maret has developed paper-based composite using newspaper waste in Praktikum Perancangan Teknik Industri (PPTI) II. Unfortunately, the quality of composite is not so good. This paper tried to understand the effect of factors to responses and discover the best combination of factors to obtain the best responses. The responses of this experiment are tensile strength, bending strength and impact value. The factors of this experiment are paper pulp, PVAc glue and water. Taguchi method is used to find the appropriate orthogonal array and Particle Swarm Optimization method to find the optimum combination of the factors. Orthogonal array used in this experiment is L9 (34). Through analysis, all of the factors are significant to tensile and bending strength, but they are not significant to impact value. The best combination of factors is 175 grams paper pulp, 130 grams PVAc glue and 175 ml water. Optimum results obtained for tensile strength is 0.7595 N/mm2, bending strength is 4.873 N/mm2 and impact value is 0.0138 J/mm2.

Cleaner production of sugars and pulp from renewable feedstocks has captured significant scientific attention in the recent past because they can be used for various end applications. In the papermaking industry, a major fraction of hemicellulosic sugars is lost during the pulping. The present study aims at retrieving these hemicellulosic sugars through alkali-, hot-water-, and acid-mediated extraction prior to pulping, which otherwise would have been lost during pulping and washing of pulp. These retrieved sugars can be used as feedstocks for renewable energy and value-added products. Different pretreatments were applied, aided with varying temperature, chemical concentrations, and time. Substantial amounts of total reducing sugars (TRSs) up to 21.98, 13.2, and 15.01% were extracted prior to pulping by acid, alkali, and hot-water pretreatments. Compositions of mono sugars present in the treated liquor were also characterized and confirmed by high-performance liquid chromatography analysis. The morphological changes in the wheat straw after pre-extraction were studied using the field emission gun scanning electron microscopy technique. Pulping of untreated and pretreated wheat straw was carried out at different alkali charges (12, 14, and 16% NaOH). Among all, acid-pretreated straw showed an increase in pulp yield by 10.9% at a 16% alkali charge. Physical strength properties of different pulps were further examined. Alkali- and hot-water-pretreated straw pulp retained 94.26 and 83.16% tensile indices and 92.43 and 87.02% burst indices, respectively. An increase in tear index up to 4.32, 2.01, and 2.30% for alkali-, hot-water-, and acid-pretreated straw pulp was achieved, respectively. Hot-water- and alkali-pretreated wheat straw was observed to be conducive for paper production. The integrated use of wheat straw for extraction of underutilized sugars and pulp production in this way may serve as a key stepping stone for future biorefinery designs in pulp and paper mills.

Process-monitoring laboratories in the pulp and paper industry generally use a combination of wet chemical analyses and physical measurements to certify the fitness of a production pulp for a specific end-use. These laboratory tests require time and the effort of trained personnel, limiting their utility for real-time process control. Here we show that Raman probes of unrefined cellulosic pulps, well-suited to the online measurement of in-process materials, can predict the quality attributes of manufactured papers. The accuracy of prediction improves when the covariance is modelled in a reduced measurement space selected by a data-driven, feature-selection technique referred to as a Template Oriented Genetic Algorithm (TOGA). TOGA, combined with discrete wavelet transform (DWT), isolates functional-group features that correlate best with mechanical properties paper derived from refined pulp. Paper makers refine market pulps to build sheet strength using a beating process that decreases freeness as it increases fibre-fibre bonding. Methods demonstrated here predict manufactured sheet properties obtainable after any specified degree of refining from the Raman spectrum of an unrefined pulp. This analysis capacity will enable both vendors of market pulp and makers of sheet paper to specify in advance the amount of beating required to produce a desired product, thereby saving cost and conserving resources.

The pulp and paper industry has a great impact in the world. It has been manufactured for ages and ages, it is still booming up as industry in small scale and large scale levels. Despite the fact that they produce printing and writing papers, paper rolls, packaging material etc. they also produce large amount of waste materials from their Industry by Manufacturing. This when left untreated leads to environmental pollution, harsh contamination and so on. As every industry has its own waste water treatment methods to recycle, reuse and reduce pollution. This Industry also has its own criteria to carry out the process of waste water treatment, yet it lags in being efficient in it. By the sources collected and compared with other kinds of industries it is listed that pulp and paper manufacturing industry is one of the top most industries to produce large volumes of waste water which has degradable organics at higher level. Hence this paper aims to study the manufacturing process, waste water components released and its effect on environment, the treatment methods carried out and how it can be improvised efficiently in forthcoming days

The paper industry is an important component in the Colombian economy, the need for the continuous use of paper and cardboard in different activities results in the generation of paper sludge, for this reason there is an imminent need to generate alternatives for the use of these industrial wastes. which have been on the rise in recent years. This study is divided into two stages, the first is the evaluation through experimental analysis of the demonstration of the effectiveness of paper mud as an important source of carbon in composting processes, the second is the life cycle analysis (LCA) of the Alternative replacement of Composting vs. Synthetic Fertilizers. The product obtained from the evaluation corresponds to a stabilized compost with chicken manure, which is an important source of Carbon, Nitrogen and Calcium Carbonate, resulting in an environmentally sustainable alternative compared to the use of synthetic fertilizers. In the future, an increase in the use of fertilizers is expected, due to the growth of the world population, which generates an expansion of food production and an imminent need to attend to it. The ALC provides a better understanding of the process and its environmental impacts, the results will allow us to conclude on the most appropriate management option by showing the advantages and disadvantages associated with the use of compost. Organic fertilizers, unlike synthetic fertilizers, improve the fertility, texture and structure of the soil in the long term, promoting good drainage, aeration, water retention and root penetration, in addition to contributing to the stabilization of pH in acidic soils. The main challenges in integrating composting from paper sludge and chicken manure is to balance the C / N ratio, making a balance of the nutrient mixture and thus improving composting times, the loss of humidity, temperature gain, microbiological control and porosity.

The main environmental risks in the area of landfills are considered, all aspects of their technological reclamation using waste from the Baikal PPM are discussed. The data on the creation of soil and grounds using lignin-destroying microbiological preparations are presented. The final stage of the remediation of the Solzan landfill is the creation of cadastral maps 8, 9, 10 modern forest nurseries on the site, protected by flood and mudflow protection structures.

Maturity of vermicomposted end products obtained from citronella bagasse (CB) and a mixture of citronella bagasse and paper mill sludge (CB + PMS) was determined employing the epigeic earthworm species Eisenia fetida. Two of the primary biological indicators—enzyme assay and germination index—were used for evaluation of vermicompost maturity. The enzyme assay includes the changes in dehydrogenase and urease activities in the final products. The test for germination index was performed on two economically important plant species Abelmoschus esculentus and Solanum melongena. The results revealed a significant increase in dehydrogenase and urease activities in the vermicompost samples over the raw materials and traditional compost. The enhancement was recorded 215.63–225.63% in dehydrogenase and 149.89–249.31% for urease in the end products obtained after 45 days of experimental trials. Further, the higher values of germination index in the vermicompost treatments as against the control confirm the suitability and stability of the vermicomposted final products.

The present study was undertaken to know the effect of common mixed pulp and paper mill effluent discharge released from century pulp and paper mill Lalkuan, Nainital Uttarakhand on the blood morphology of Heteropneustes fossilis (Singhi). The various morphological changes were observed in the specimen, randomly collected with the help of cast net from (3 sites) different locations. The maximum changes were observed in the specimen collected from site 3 in compare to site 1 and 2 respectively. The formation of inclusion bodies, sickle cells, Cabot rings and ovalocytes were recorded along with nuclear fusion, membrane disruption and cell clumping of blood cells in the specimen collected from the site 3 (i.e. nearer to source of discharge) while in the specimen collected from site 2, the formation of tear drop cell, target cells, spherocytes and bi-nucleated cells were recorded along with the activity of cell clumping. The changes were found less in the specimen collected from site 1 in compare to the specimen of site 2 and 3 i.e. formation of ovalocytes, spherocytes and microcytes with the activity of membrane degeneration and agglutination in blood cells.

Detecting the concentration of free chlorine is important for monitoring the quality of water. In this study, we report a nanohybrid paper-based chemiresistive sensor that can be used with smartphones to detect free chlorine ions. The sensor was fabricated using a simple and standardized coating process. The graphene and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) nanohybrid paper-based sensing device exhibited a more stable and intuitive response to free chlorine than that exhibited by the device using only PEDOT:PSS. The nanohybrid paper-based sensor was sensitive to free chlorine concentrations in a linear range of 0.1-500 ppm, and the limit of detection was 0.18 ppm. The sensor showed specificity for free chloride ions and detection capability in samples. The sensor was integrated as a module with an electric readout system, and the measured signals and results could be displayed in real time on a smartphone. Therefore, the proposed sensing platform is suitable owing to its portability, low cost, ease of use, and capability for on-site water quality measurement.

Tissue paper production frequently combines two main types of raw materials: cellulose fibers from renewable sources and polymer-based additives. The development of premium products with improved properties and functionalities depends on the optimization of both. This work focused on the combination of innovative experimental and computational strategies to optimize furnish. The main goal was to improve the functional properties of the most suitable raw materials for tissue materials and develop new differentiating products with innovative features. The experimental plan included as inputs different fiber mixtures, micro/nano fibrillated cellulose, and biopolymer additives, and enzymatic and mechanical process operations. We present an innovative tissue paper simulator, the SimTissue, that we have developed, to establish the correlations between the tissue paper process inputs and the end-use paper properties. Case studies with industrial interest are presented in which the tissue simulator was used to design tissue paper materials with different fiber mixtures, fiber modification treatments, micro/nano fibrillated cellulose, and biopolymer formulations, and to estimate tissue softness, strength, and absorption properties. The SimTissue was able to predict and optimize a broader range of formulations containing micro/nanocellulose fibers, biopolymer additives, and treated-fiber mixtures, saving laboratory and industrial resources.

The pulp and paper industry has a high potential to contribute to negative emissions through carbon capture and storage (CCS) applied to existing processes. However, there is a need to investigate how CCS solutions also can be combined with implementation of other emerging technologies in pulp and paper mills. This paper investigates the integration of a novel calcination process in two kraft mills and evaluates its potential combination with capture and storage of CO2 from the calcination plant. The alternative calcination process uses electric gas-plasma technology combined with steam slaking and allows replacing the conventional fuel-driven lime kilns with a process driven by electricity. The novel calcination process generates a pure, biogenic, CO2 stream, which provides an opportunity to achieve negative emissions at relatively lower costs. The potential reduction of greenhouse gas emissions when replacing the lime kiln with the plasma calcination concept depends strongly on the emissions intensity of grid electricity, and on whether fossil fuel or biomass was used as a fuel in the lime kiln. If fossil fuel is replaced and electricity is associated with very low emissions, avoided CO2 emissions reach ~50 kt/a for the smaller mill investigated in the paper (ca 400 kt pulp per year) and almost 100 kt/a for the larger mill (ca 700 kt pulp per year). Further emission reductions could then be achieved through CCS from the electrified calcination process, with capture potentials for the two mills of 95 and 164 kt/a, respectively, and capture and storage costs estimated to 36–60 EUR/tCO2.

PURPOSE: Main insight of the study was to evaluate the potential of Perionyx excavatus, an indigenous earthworm of India towards bioconversion of toxic paper mill wastes. The study had considered a comprehensive study over succession of different enzymes and microbial biomasses alongside removal of heavy metals to reflect the qualitative enrichment of the toxic waste through valorisation procedure. METHODS: The process of vermicomposting was performed using ratio of paper mill sludge: cow dung: straw as 5:4:1 and Perionyx excavatus for a period of 60 days. Qualitative enrichment was considered through detailed evaluation of physicochemical parameters and succession of 19 enzymes using API ZYM technology. Heavy metal loads in terms of Zn, Cr, Cu, Pb along with bioaccumulation factor (BAF) were considered to establish functional role of earthworm in bioremediation. Microbial succession was measured in terms of PLFA biomarkers. RESULTS: Enzymatic enrichment of different isozymes of esterase, aminopeptidase and glycosyl hydrolase were found in the vermicompost. A significant reduction of heavy metals was noticed in vermicomposting of primary sludge as Zn > Pb > Cr > Cu and secondary sludge as Zn > Pb > Cu > Cr. An increase in density of Gram positive bacterial and fungal populations was found at the end phase of vermicomposting process which supports maturity of vermicompost. CONCLUSION: Presence of different enzyme activities, reduction of heavy metal loads along with rise of eukaryotic PLFA markers, had illustrated the efficiency of vermicomposting as a valorisation procedure in the qualitative enrichment of toxic organic paper mill sludge.

Lime mud, a kind of industrial waste that produced in paper mill, was proposed as CO2 sorbent in calcium looping process. The carbonation performance of the lime mud was investigated in a dual‐fixed bed reactor (DFR) and a thermogravimetric analyzer (TGA). The carbonation kinetics of the lime mud in the chemical reaction controlled stage was analyzed by a surface reaction‐controlled kinetic model. The results show that the lime mud presents much poorer carbonation performance during the chemical reaction controlled stage compared with the limestone, mainly due to the high content of chlorine in the lime mud. A prewash treatment process was used to decrease the chlorine content to mitigate the sintering of the lime mud when calcined at high temperature. After prewash treatment, the prewashed lime mud shows much higher CO2 capture capacity during the chemical reaction controlled stage compared with the lime mud. A prolonged carbonation process successfully further enhances the microstructure and improves the carbonation performance of the prewashed lime mud in the chemical reaction controlled stage. The lime mud can be effectively used as CO2 sorbent in calcium looping process after prewash treatment and the following prolonged carbonation treatment.

Based on publications related to the use of micro- and nanofibrillated cellulose (MNFC) in papermaking applications, three sets of parameters (intrinsic and extrinsic variables, furnish composition, and degree of dispersion) were proposed. This holistic approach intends to facilitate understanding and manipulation of the main factors describing the colloidal behavior in systems comprising of MNFC, pulp fibers, and additives, which directly impact paper product performance. A preliminary techno-economic assessment showed that cost reductions driven by the addition of MNFC in paper furnishes could be as high as USD 149 per ton of fiber (up to 20% fiber reduction without adverse effects on paper’s strength) depending on the cost of papermaking fibers. It was also determined that better performance in terms of strength development associated with a higher degree of MNFC fibrillation offset its high manufacturing cost. However, there is a limit from which additional fibrillation does not seem to contribute to further strength gains that can justify the increasing production cost. Further research is needed regarding raw materials, degree of fibrillation, and combination with polyelectrolytes to further explore the potential of MNFC for the reduction of weight of paper products.

The paper presents the results of the analysis on measured parameters of harmonics at the node of the high-voltage network. The measurements were made at the node connecting the pulp-and-paper mill to the 220 kV supply network. This load is nonlinear and has a large capacity. Particular attention is paid to the distributions of the current and voltage harmonics. The paper clearly shows probabilistic properties of the measured parameters of harmonics

The thriving development of the paper industry leaves behind a great amount of pulp and paper mill sludge (PPMS), which constitutes a considerable source of pollution. Experts estimate that...

A series of industrial experimental tests on the freeze treatment of colloidal sludge lignin precipitates was carried out under natural conditions. Changes in the physical and chemical properties of the precipitates were studied. It is established that three fractions are formed following the freeze treatment of colloidal sludge lignin precipitates, including demineralized water (up to 25 %), mineralized water (up to 15 %) and a restructured colloidal precipitate (up to 60 %). The total volume of the precipitate is shown to decrease to 40 %. Freezing precipitation of colloidal lignin slurry of "the Baikal Pulp and Paper Mill" leads to a decrease in toxicity from the third to the fifth class of danger. On the basis of frozen sediments, the lignin sludge of OJSC Baikal Pulp and Paper Mill with the addition of other waste from the Baikal region, a fertile soil was obtained that corresponds to GOST R 54651-2011 "Organic fertilizers on the basis of sewage sludge. Specifications".

Introduction. Pulp and paper enterprises accumulate large volumes of industrial waste buried in special accumulation cells. In order to choose a technology for treating above-sludge waters, we need to monitor their composition, which depends on the history of cells’ filling and their subsequent use. Methods. In the course of the study, we applied inductively coupled plasma mass spectrometry (ICP-MS). Results. We determined the content of 72 chemical elements in above-sludge water of 11 cells at Baykalsk Pulp and Paper Mill and 4 open water flows near industrial waste landfills, and performed a cluster analysis of the sample composition. As a result, we revealed the peculiarities of water composition, related to the history of cell filling and subsequent pilot experiments. It has been found that the cells with non-disturbed sediments have cleaner water. Out of 16 chemical elements subject to limitation (Na, Al, P, S, Cl, K, Cr, Mn, Fe, Ni, Cu, Zn, Sr, Mo, Cd, Pb), 11 elements exceed the limits established for wastewater discharged into water bodies within the ecological zones of the Baikal Natural Territory. Each cell is characterized by its own set of elements exceeding maximum allowable concentrations (MAC) and by the extent of such excess. Conclusion. Pilot experiments with cell sediments (joint grouting, drying, dewatering in press-filters) result in the disturbance of the “water/sediment” balance and increase the concentrations of most elements in above-sludge waters. The maximum amounts of elements (6–7) exceeding the MAC values are observed in water in the cells with disturbed sediments, water in the zone of ash slurry discharge, ash and sludge-lignin cells with industrial and household waste. When choosing a technology and procedures for treating above-sludge waters, it is necessary to take into account the specifics of their composition. Using the polluted water flow running into Lake Baikal during catastrophic floods in the summer of 2019 as an example, we show that it is possible to use multi-element ICP-MS analysis to search for sources of pollution from industrial facilities.

Enormous quantities of bagasse are being used as raw material in agro based large integrated pulp and paper mills. Anaerobic technology is an effective means of biodegradation of organic substance in wastewater and energy production of biogas that can be used as an alternative fuel. This study illustrates the effect of HRT on performance of lab scale hybrid upflow anaerobic sludge blanket (HUASB) reactor on treatment of pulp and paper mill bagasse wash water. The lab scale HUASB reactor was designed for an effective volume of 0.013 m3 with bio balls as packing media at the top of reactor and operated under mesophilic condition. After startup period, the reactor was operated with HRTs of 23.55, 15.98, 12.00, 10.03 and 7.97 h for the average influent COD concentrations of 2503.6 mg/L, 3918 mg/L, 5432 mg/L, 6608 mg/L and 7996 mg/L respectively. The results showed that the maximum COD removal efficiencies and TSS removal efficiencies were in the range of 68.60–92.19% and 89.56–94.66% respectively. The minimum and maximum biogas yield of 0.32 and 0.53 m3/kg CODa were obtained at influent concentration of 2503.6 mg/L and 7996 mg/L respectively.

Research is devoted to the problem of recycling waste of the Baikal Pulp and Paper Mill, whose activity has caused serious damage to the ecological environment of Lake Baikal and its environs. Grouting waste production is currently the most effective possible decision to the problem of pollutants, such as sludge-lignin and ash, in water objects and groundwater. The results on the grouting of liquid and solid waste from the Baikal Pulp and Paper Mill, represented by sludge lignin and ash, are presented. Cement, liquid glass, colloidal silica, ammonium persulfate, hydrogen peroxide were used as the main hardeners. Samples were formed by mixing the original waste with astringent. The strength in time, shrinkage, resistance to water were studied. Samples formed on the basis of colloidal silica solution have a maximum uniaxial compressive strength of 0.4 - 0.5 MPa, on the basis of liquid glass—0.2 - 0.3 MPa. Adding fine sand increases the strength by 1.5 - 1.7 times. Samples based on ammonium persulfate and hydrogen peroxide do not have sufficient strength. Adding fine quartz sand increases the strength up to 1.0 - 1.2 MPa.

Cellulose paper derived from plants is used for daily writing and recording, and has historically played an important role in promoting cultural dissemination and inheritance. However, it attracted more and more attentions in recent years serving as a flexible platform or substrate for application in environment and energy, attributing from its many inherent advantages such as biocompatibility, biodegradability, sustainability, low cost, and great capability to be modified. With the development of various industries, especially the flexible electronics industry, the demand for two-dimensional (2D) paper-like materials has increased. Several kinds of inorganic paper are manufactured and have been widely used in many fields. Among them, there are hydroxyapatite (HAP)-based and carbon-based inorganic paper that give play to their own advantages and have been well applied in some fields. In addition, there are many composite papers, which are assembled from several raw materials (cellulose fibers, HAP, carbon), exhibiting excellent characteristics. Cellulose paper is no longer limited to traditional writing applications, but has great potential to be used in many aspects, achieving a gorgeous change in its role. The emergence of inorganic paper and hybrid paper has further demonstrated the application prospects of paper-like two-dimensional materials. This paper will start from the characteristics of the three types of paper and composite paper, and summarize their typical applications in the environment and energy fields.

Waste-to-energy or value-added products have been increasingly considered in many pulp and paper mills (PPMs) worldwide. However, developing appropriate conversion technologies is a major challenge in transforming PPMs wastes into biofuels or value-added biomaterials. In the present study, a long-term (320 d) anaerobic digestion of primary sludge of a thermomechanical pulp mill (TMP) was carried out for the first time in a thermophilic anaerobic membrane bioreactor (ThAnMBR). Effect of organic loading rate (OLR) in the range of 2.5–6.8 kg-COD/m3 d and hydraulic retention times (HRT) of 3–8 d on the process performance was investigated. Under various OLRs, stable biogas productions were obtained, and the best results were achieved with lower OLR (2.5 kg-COD/m3 d) and higher HRT (8 d), at biogas yields of 189 L biogas/kg MLSS fed. However, it was found that biogas production and sludge biomass degradation decrease when the organic loading rate increases. The proportion of sludge reduction ranged from 28.9 to 46.7% depending on the applied OLRs. Despite varying OLRs, stable membrane performance was obtained, where the required membrane flux was easily maintained during the reactor operation. In this study, also the properties of digestate and membrane permeates were studied under different operating conditions, and they fluctuated to some extent with OLR. ThAnMBR is a promising new technology for pulp and paper mill primary sludge treatment.

The present research deals with multivariate regression modeling of heavy metals uptake by cultivated Eichhornia crassipes (water hyacinth: WH) in the wastewater of paper and pulp processing industry. The WH plants were grown in different treatments of wastewater of paper and pulp processing industry (25, 50, 75, and 100%), while the control experiment was performed using borewell water. The influence of pH and metal quantity in the wastewater of paper and pulp processing industry over effective metal accumulation (∆Y: mg kg− 1) by WH was statistically modeled. Results showed that the established models had high R2 (

Wastewater recycling and sludge removal in the paper industry account for about 60 % of all process costs. New and environmentally friendly wastewater treatment techniques are, therefore, continually being developed. Cavitation exploitation is currently a well-investigated topic that is also interesting for the paper production industry. This study investigates efficiency of hydrodynamic cavitation alone and in combination with the addition of NaOH for the treatment of secondary pulp and paper mill sludge in order to enhance nutrient release. First, two laboratory-scale devices were tested: the blow-through and the rotating hydrodynamic cavitation generator. The latter set-up proved to be more efficient: therefore, further experiments were performed on its pilot-scale version. The results showed an increase of soluble chemical oxygen demand (CODs) by 514 mg/L, total nitrogen (Nt) by 17.4 mg/L, and total phosphorous (Pt) by 2.3 mg/L. To further increase nutrient release combination of cavitation and sludge sample alkalinization was tested. The addition of NaOH and 30 min cavitation of secondary sludge (500 L) significantly improved CODs and Nt release by 2400 mg/L and 120 mg/L, respectively. Microbiological photos revealed a definite disintegration of sludge flocks. According to our estimates, 1.9 kg of released CODs from alkaline pre-treated and cavitated sludge would cost only one euro.

Huge quantity of paper mill wastes are dumped at the outskirt of factory as unwanted materials. Vermicomposting is an eco-friendly technique for beneficial conversion of different biodegradable/organic wastes into useful organic manure utilizing earthworms. Solid wastes generated in paper mills contain appreciable quantity of organic matter. Attempt was made for bio-conversion of Emami paper mill wastes with different numbers of Eisenia fetida (5–30 earthworms/2 kg substrate) for studying its influence on vermi-conversing time and quality of prepared vermicompost. Vermicomposting was carried out in trays following heap method and quality of final product was determined following both chemical analysis and bioassay on wheat seedlings. Application of more earthworms up to 20 numbers per 2 kg substrate made bio-conversion quicker but further addition of earthworm, however, delayed the process as some earthworms came out of beds and died probably due to competition for food among earthworms inside beds. Ten earthworms per kg paper mill wastes–saw dust–cow dung mixture (1:0.5:0.5 weight wise) was found as optimum earthworm population for preparing quality vermicompost having more major and secondary plant nutrients. Bioassay of this manure on wheat seedlings also confirmed the analytical findings. It is confirmed that earthworm population in vermibed played vital role in faster decomposition of paper mill wastes and releasing of more nutrients, which ultimately helped in better growth of wheat seedlings. Successful demonstration of vermicomposting technique will encourage local farmers for beneficial utilization of paper mill wastes in their agriculture.