Search

A state-of-the-art, ultrasensitive, paper-based SERS sensor has been developed using silver nanostars (AgNSs) in combination with synthetic and natural antibodies. A key component of this innovative sensor is the plastic antibody, which was synthesized using molecularly imprinted polymer (MIP) technology. This ground-breaking combination of paper substrates/MIPs with AgNSs, which is similar to a sandwich immunoassay, is used for the first time with the aim of SERS detection and specifically targets nucleolin (NCL), a cancer biomarker. The sensor device was carefully fabricated by synthesizing a polyacrylamide-based MIP on cellulose paper (Whatman Grade 1 filter) by photopolymerization. The binding of NCL to the MIP was then confirmed by natural antibody binding using a sandwich assay for quantitative SERS analysis. To facilitate the detection of NCL, antibodies were pre-bound to AgNSs with a Raman tag so that the SERS signal could indicate the presence of NCL. The composition of the sensory layers/materials was meticulously optimized. The intensity of the Raman signal at ∼1078 cm -1 showed a linear trend that correlated with increasing concentrations of NCL, ranging from 0.1 to 1000 nmol L -1 , with a limit of detection down to 0.068 nmol L -1 in human serum. The selectivity of the sensor was confirmed by testing its analytical response in the presence of cystatin C and lysozyme. The paper-based SERS detection system for NCL is characterized by its simplicity, sustainability, high sensitivity and stability and thus embodies essential properties for point-of-care applications. This approach is promising for expansion to other biomarkers in various fields, depending on the availability of synthetic and natural antibodies., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Dried serum spots that are well prepared can be attractive alternatives to frozen serum samples for shelving specimens in a medical or research center's biobank and mailing freshly prepared serum to specialized laboratories. During the pre-analytical phase, complications can arise which are often challenging to identify or are entirely overlooked. These complications can lead to reproducibility issues, which can be avoided in serum protein analysis by implementing optimized storage and transfer procedures. With a method that ensures accurate loading of filter paper discs with donor or patient serum, a gap in dried serum spot preparation and subsequent serum analysis shall be filled. Pre-punched filter paper discs with a 3 mm diameter are loaded within seconds in a highly reproducible fashion (approximately 10% standard deviation) when fully submerged in 10 μl of serum, named the "Submerge and Dry" protocol. Such prepared dried serum spots can store several hundred micrograms of proteins and other serum components. Serum-borne antigens and antibodies are reproducibly released in 20 μl elution buffer in high yields (approximately 90%). Dried serum spot-stored and eluted antigens kept their epitopes and antibodies their antigen binding abilities as was assessed by SDS-PAGE, 2D gel electrophoresis-based proteomics, and Western blot analysis, suggesting pre-punched filter paper discs as handy solution for serological tests., Competing Interests: Declaration of Competing Interest None., (Copyright © 2023 The Author(s). Published by Elsevier B.V. All rights reserved.)

Long term stability of antibodies at room temperature is a major challenge in the commercialization of point-of-care devices for diagnostics. Since chitosan has been proven to be an excellent biofunctionalization material, the effects of four different biofunctionalization processes were studied to improve the room temperature stability of antibodies immobilized on chitosan modified paper-based microfluidic devices using blood typing antibodies as candidates. The devices used in this work have a flower-shaped design with 4 test zones at each corner. In three zones Anti-A, Anti-B, and Anti-D (Anti-Rh) antibodies are immobilized and the fouth zone represents the control (no antibodies) after biofunctionalization. The biofunctionalization of the paper devices was done with chitosan and chitosan cross-linked with sodium triphosphate pentabasic, glutaraldehyde, and sodium hydroxide. These devices were used for blood typing assays using real blood samples. A similar assay was also performed on unmodified (non-biofunctionalized) paper devices for comparison. Chitosan based biofunctionalized paper-devices showed better stability, up to 100 days as compared to 14 days on unmodified paper, at room temperature. Such biofunctionalized paper-based devices will be suitable for on-field and remote testing without any technical expertise and requirement for the cold chain., (Copyright © 2020. Published by Elsevier B.V.)

As new infectious disease outbreaks become more likely, it is important to be able to develop and deploy appropriate testing in time. Paper-based immunoassays are rapid, cheap, and easy to produce at scale and relatively user friendly but often suffer from low selectivity and sensitivity. Understanding the molecular mechanisms of paper immunoassays may help improve and hasten development and therefore production and market availability. Here, we study how the behavior of nanoparticle-antibody immunoprobes in paper dipstick immunoassays is impacted by synthesis strategy and surface chemistry architecture. We conjugate gold nanoparticles to polyclonal anti-immunoglobulin G (IgG) and anti-zika NS1 antibodies by electrostatic adsorption and N -hydroxysuccinimide (NHS) and hydrazide (Hz) chemistries. The immunoprobes were used in paper immunoassays and the effective affinity for the antigen was quantified from the test line intensities, as well as the distribution of the immunoprobes throughout the strips. The results show that nanoparticle colloidal stability, both post synthesis and during antigen binding, is a key factor and affects immunoassay results and performance, often through reduction or loss of signal.

Binding protein scaffolds, such as rcSso7d, have been investigated for use in diagnostic tests; however, the functional performance of rcSso7d has not yet been studied in comparison to antibodies. Here, we assessed the analyte-binding capabilities of rcSso7d and antibodies on cellulose with samples in buffer and 100% human serum.

Multiclass chemical contamination of food has aroused ever-increasing attention due to the increasingly common findings of the co-occurrence of multiclass contamination, such as mycotoxin (aflatoxin M1, AFM1) and illegal additive (melamine, MEL). In the present study, a rapid, ultrasensitive detection paper was developed on the basis of a unique bridge-antibody label to realize on-site simultaneous detection of AFM1 and MEL in milk. This detection paper used the bridge-antibody label on fluorescent particles (i.e., the fluorescent Eu nanoparticles were first conjugated with polyclonal antibodies and then with monoclonal antibodies). Dramatically enhanced sensitivity was found, probably due to the increase in immobilization of efficient monoclonal antibodies onto microspheres. Under optimal conditions, the lower limits of detection were 0.009 and 0.024 ng/mL for AFM1 and MEL in milk, respectively, in comparison with similar works. Moreover, the cutoff values were 0.4 and 150 ng/mL for AFM1 and MEL, respectively. The recoveries ranged from 88.7% to 105.0% for AFM1 and from 84.6% to 117.7% for MEL, with relative standard deviations (RSDs) of 0.5-9.9% during the intraday and interday experiments. Comparison experiments conducted using the detection paper, HPLC, and UPLC-MS/MS found excellent agreement in the simultaneous detection of AFM1 and MEL in milk. This proposed method can be extensively employed for simultaneous monitoring of multiclass chemical contaminants to ensure food safety.

This article describes a 3D microfluidic paper-based analytical device that can be used to conduct an enzyme-linked immunosorbent assay (ELISA). The device comprises two parts: a sliding strip (which contains the active sensing area) and a structure surrounding the sliding strip (which holds stored reagents-buffers, antibodies, and enzymatic substrate-and distributes fluid). Running an ELISA involves adding sample (e.g. blood) and water, moving the sliding strip at scheduled times, and analyzing the resulting color in the sensing area visually or using a flatbed scanner. We demonstrate that this device can be used to detect C-reactive protein (CRP)-a biomarker for neonatal sepsis, pelvic inflammatory disease, and inflammatory bowel diseases-at a concentration range of 1-100ng/mL in 1000-fold diluted blood (1-100µg/mL in undiluted blood). The accuracy of the device (as characterized by the area under the receiver operator characteristics curve) is 89% and 83% for cut-offs of 10ng/mL (for neonatal sepsis and pelvic inflammatory disease) and 30ng/mL (for inflammatory bowel diseases) CRP in 1000-fold diluted blood respectively. In resource-limited settings, the device can be used as a part of a kit (containing the device, a fixed-volume capillary, a pre-filled tube, a syringe, and a dropper); this kit would cost ~ $0.50 when produced in large scale (>100,000 devices/week). This kit has the technical characteristics to be employed as a pre-screening tool, when combined with other data such as patient history and clinical signs., (Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.)

Paper has been used to engineer many types of bio-diagnostics. A major issue to most paper-based bio-diagnostics is the biomolecule instability causing the short shelf-life of the diagnostics. Commercial papers contain various polymeric additives. Polyamidoamine-epichlorohydrin (PAE), a polyelectrolyte typically used as wet-strength agent, is commonly used in filter papers and paper towels, which are often used as substrate in bioactive paper. However, the effect of cellulose or polymeric additives on antibody bioactivity is unknown. This limits paper optimization for diagnostic applications. In this study, model papers were made with and without PAE addition. IgM Anti-A blood typing antibody was physisorbed and dried on paper, aged for up to 9 weeks at different relative humidity (RH) conditions and the antibody activity was measured. The antibody bioactivity was represented as blood typing efficiency measured by image analysis. The surface chemical composition was measured using X-ray photoelectron spectroscopy (XPS). Antibody bioactivity loss was promoted by elevated RH, corresponding to increased paper water content. PAE significantly reduces the paper water content under ambient environment. Antibody bioactivity is higher on paper made with PAE under the high humidity conditions (57.6%-84.3% RH). However, under conditions of humidity saturation (100%RH), PAE shows little effect on reducing paper water content nor on protecting antibody bioactivity. These results demonstrate the water content of paper to be associated with antibody bioactivity loss., (Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.)

This report presents two methods for the covalent immobilization of capture antibodies on cellulose filter paper grade No. 1 (medium-flow filter paper) discs and grade No. 113 (fast-flow filter paper) discs. These cellulose paper discs were grafted with amine functional groups through a silane coupling technique before the antibodies were immobilized on them. Periodate oxidation and glutaraldehyde cross-linking methods were used to graft capture antibodies on the cellulose paper discs. In order to ensure the maximum binding capacity of the capture antibodies to their targets after immobilization, the effects of various concentrations of sodium periodate, glutaraldehyde, and capture antibodies on the surface of the paper discs were investigated. The antibodies that were coated on the amine-functionalized cellulose paper discs through a glutaraldehyde cross-linking agent showed enhanced binding activity to the target when compared to the periodate oxidation method. IgG (in mouse reference serum) was used as a reference target in this study to test the application of covalently immobilized antibodies through glutaraldehyde. A new paper-based, enzyme-linked immunosorbent assay (ELISA) was successfully developed and validated for the detection of IgG. This method does not require equipment, and it can detect 100 ng/ml of IgG. The fast-flow filter paper was more sensitive than the medium-flow filter paper. The incubation period of this assay was short and required small sample volumes. This naked-eye, colorimetric immunoassay can be extended to detect other targets that are identified with conventional ELISA.

Using filter paper to collect blood from wildlife for antibody analysis can be a powerful technique to simplify the collection, transport, and storage of blood samples. Despite these advantages, there are limited data that detail how long these samples can be stored and how storage conditions affect antibody longevity. We used blood samples collected on filter paper from coyotes experimentally infected with Yersinia pestis to determine optimum sample storage conditions over time. Blood samples collected on filter paper were stored for 454 d or more in four groups: 1) at ambient temperature and at ambient relative humidity, 2) at ambient temperature with desiccant, 3) at 4 C with desiccant, and 4) at -20 C with desiccant. Samples stored at 4 C or -20 C with desiccant had detectable antibody for a longer period of time than the samples stored at room temperature.

Microfluidic paper-based analytical devices (μPADs) fabricated by wax-printing are suitable platforms for the development of simple and affordable molecular diagnostic assays for infectious diseases, especially in resource-limited settings. Paper devices can be modified for biological assays by adding appropriate reagents to the test areas. For this purpose, the use of affinity immobilization strategies can be a good solution for bioactive paper fabrication. This paper describes a methodology to capture labeled-DNA strands and hybrids on paper via the anchoring of antibodies with a fusion protein that combines a family 3 carbohydrate binding module (CBM) from Clostridium thermocellum, with high affinity to cellulose, and the ZZ fragment of the staphyloccocal protein A, which recognizes IgG antibodies via their Fc portion. Antibodies immobilized via CBM-ZZ were able to capture appropriately labeled (biotin, fluorescein) DNA strands and DNA hybrids. The ability of an antibody specific to biotin to discriminate complementary from noncomplementary, biotin-labeled targets was demonstrated in both spot and microchannel assays. Hybridization was detected by fluorescence emission of the fluorescein-labeled DNA probe. The efficiency of the capture of labeled-DNA by antibodies immobilized on paper via the CBM-ZZ construct was significantly higher when compared with a physical adsorption method where antibodies were simply spotted on paper without the intermediation of other molecules. The experimental proof of concept of wax-printed μPADs functionalized with CBM-ZZ for DNA detection at room temperature presented in this study constitutes an important step toward the development of easy to use and affordable molecular diagnostic tests.

Reagent storage has been a long-standing challenge for diagnostics, especially those designed for low-resource settings and point-of-care applications. In general, the stability of a reagent relies on careful temperature control, often by refrigeration, which is costly and often unavailable in these remote settings. Poor reagent integrity can negatively affect the reproducibility and reliability of an assay. Given the recent interest in paper-based devices designed for quantitative analysis in point-of-care settings, a better understanding of reagent stability on filter paper is critical for proper device use and its longevity. In this article, we present an independent method to examine the stability of reconstituted antibodies that were stored on filter paper using flow cytometry. We validated the method by measuring the activity as measured by the mean fluorescence intensity (MFI) of antibodies stored with known stabilizers. Furthermore, we demonstrated the potential of our method to screen the influence of other paper treatments and storage processes on antibody stability, which may be applicable to the storage of reagents on paper in general., (Copyright © 2014. Published by Elsevier Inc.)

Recent reports on using bio-active paper and bio-active thread to determine human blood type have shown a tremendous potential of using these low-cost materials to build bio-sensors for blood diagnosis. In this work we focus on understanding the mechanisms of red blood cell agglutination in the antibody-loaded paper. We semi-quantitatively evaluate the percentage of antibody molecules that are adsorbed on cellulose fibres and can potentially immobilize red blood cells on the fibre surface, and the percentage of the molecules that can desorb from the cellulose fibre surface into the blood sample and cause haemagglutination reaction in the bulk of a blood sample. Our results show that 34 to 42% of antibody molecules in the papers treated with commercial blood grouping antibodies can desorb from the fibre surface. When specific antibody molecules are released into the blood sample via desorption, haemagglutination reaction occurs in the blood sample. The reaction bridges the red cells in the blood sample bulk to the layer of red cells immobilized on the fibre surface by the adsorbed antibody molecules. The desorbed antibody also causes agglutinated lumps of red blood cells to form. These lumps cannot pass through the pores of the filter paper. The immobilization and filtration of agglutinated red cells give reproducible identification of positive haemagglutination reaction. Results from this study provide information for designing new bio-active paper-based devices for human blood typing with improved sensitivity and specificity.

Compliance and acceptance for the finger-prick method of blood collection is generally better than for venipuncture. A finger-prick method of blood collection with quantitative antibody recovery is even more important for seroepidemiological surveys. Finger-prick blood collected and dried onto filter paper has been used; but, unfortunately, this method has several disadvantages, including loss of antibody activity, possible contact contamination from blood spots on adjacent filter papers, and difficulties in extracting antibodies, justifying the search for other methods of collecting and transporting blood samples. We report on a simple method of collecting a measured amount of finger-prick blood onto a sample pad, which is immediately transferred to storage/extraction buffer. The diluted blood sample is never dried, and because of the storage buffer, can be transported and stored without refrigeration. Furthermore, the diluted blood samples can then be tested directly without further preparation. We systematically compared several storage/extraction buffers and commercially available filter papers. We showed that antibody recovery was not significantly affected by the type of filter papers used but was significantly affected by the storage/extraction buffer used. The best such buffer is StabilZyme Select.

Proteins immobilized on insoluble carriers or immunoadsorbents are now widely used in many areas of biological research. They are especially efficient in studies of complex protein mixtures because immunoadsorbents are very useful for isolation of individual components for further investigation. Antibodies immobilized on paper retain their specific activity and can be applied as very sensitive measurement tool.

A device is described which is used to measure the concentration of antigen in solution. A wedge-shaped gap containing the antigen to be detected is bounded on one side by a reservoir containing specific antiserum and on the opposite side by a detection slide which has been previously coated with a layer of adsorbed antigen. As the antibodies diffuse through the gap, they complex with the soluble antigen in the wedge until these become saturated leaving additional antibody free to complex with antigen on the detection slide. By allowing diffusion to continue for an appropriate time, it is possible to relate the distance along the gap where this has occurred to the concentration of antigen within the gap. Using human IgG as a model antigen, we have been able to measure concentrations down to approximately 10 micrograms/ml with this test.

A rapid method for the analysis of antigen-specific human serum antibodies is described. After isoelectric focusing on thin agarose gels, serum proteins are transferred to nitrocellulose paper by capillary blotting. The kinetics of transfer indicated that ca. 90% of 125I-labelled isolated human immunoglobulins (IgG, IgA and IgM) are transferred to the nitrocellulose paper within 10 min. Probing of the nitrocellulose blot with 125I-labelled tetanus toxoid antigen followed by autoradiography reveals the total serum anti-tetanus toxoid antibody repertoire, including high molecular weight IgM. This procedure is rapid (results can be obtained in less than 12 h), sensitive and should prove very useful for detailed studies and analysis of antibody repertoires in body fluids and extracts

We describe here the profiles of antigens of Dirofilaria immitis that are immunogenic in dogs. Purebred beagle dogs were inoculated with a standard number of the infective third-stage larvae of the heartworm. Microfilaremia and anti-heartworm antibody levels were monitored by the Knott's test and by ELISA, respectively. Antibody-binding polypeptides were detected by immunoperoxidase staining of protein blots of detergent extracts of adult parasites from SDS-PAGE gels. Densitometric scans of these blots revealed considerable variation in the profiles of dirofilarial antigens detected by the sera obtained at different stages of the infection. Sera obtained during the prepatent phase, i.e., 3 mo post-infection (titer 1:2000), detected antigens of Mr 75, 80, 100, 130, and 200 kilodaltons. In addition to these antigens, sera obtained at the onset of microfilaremia, 6 mo post-infection (titer 1:30,000), detected antigens of Mr 15, 16, 18, 34, and 38 kilodaltons. Protein blots stained with sera from dogs, which subsequently cleared the microfilaremia and in which the infection became occult, showed that most of the antibody reactivities were directed at antigens of Mr 15, 21, and 38 kilodaltons. The variations in the species of molecules detected in sera obtained during the course of an infection seem to reflect fluctuations in the levels of specific antibodies directed at the individual heartworm antigens. We discuss the apparent role that the metamorphic differentiation of the parasite may play in determining the levels of reactivities of these antibodies at specific stages of the infection.

RAST was performed using both nitrocellulose (NC) and paper discs to compare these solid supports for ability to detect IgE antibodies in sera from two patients with hypersensitivity to the industrial chemical, diphenylmethane-4,4'-diisocyanate (MDI). NC disc had distinct advantages in ease of coupling the hapten-conjugate antigen to discs, and in use of lesser amounts of antigen. With regard to sensitivity, NC discs were better able to distinguish the positive sera from 34 control sera including those with elevated levels of total IgE. In both RAST systems, inhibition studies indicated high specificity of antibodies for MDI, with no reactivity detected toward the serum albumin portion of the MDI-HSA conjugate antigen. However, only in the NC RAST did antibodies from both patients react with p-tolyl isocyanate inhibitor. Based on the above results, NC discs displayed several advantages in RAST and are recommended for routine serological assay of isocyanate-specific antibodies.

Antiserum was raised against an acetic acid extract of partly mineralized bovine enamel. By use of immunoblotting it was shown that rabbit antibodies react with both high and low molecular weight proteins. Most but not all of the enamel proteins isolated by different extraction solutions were antigenic identical. The blotting time was found to be important when immunoblotting of enamel proteins is carried out.

Serum and elutates from dried filter paper bloods from 404 patients with and without amebic liver abscess (ALA) were tested for Entamoeba histolytica antibodies by the indirect hemagglutination test. Eighty-nine percent of the sera from patients with ALA were positive (titers greater than or equal to 1 : 128) and 94% of those without ALA negative. Fifty-five percent of the filter paper bloods from ALA patients were positive. Overall agreement was 80% for positives and negatives and the correlation coefficient between the methods showed a linear relationship (r = 0.77). Although the quantity of sera available from dried filter paper bloods is limited and some antibody activity may be lost, the method should be of value in seroepidemiologic studies where venous bloods are not easily obtained.

A blot-immunobinding test was used to detect anti-sperm antibodies in human sera and to identify the corresponding auto- or iso-antigens on human sperm. A high proportion of sera at a 1:100 dilution from fertile persons, as well as infertile patients, contains antibodies reactive with sperm. This phenomenon might be physiological. At 1:2,000 dilution, a higher binding capacity was detected in the sera from infertile groups, but a few fertile persons were also positive. Antibodies to a single antigenic determinant with Mr of approximately 14,000 were found in a significantly higher proportion among males with unexplained infertility.

A method is described for the affinity purification of antibodies using protein samples that have been electrophoretically transferred to diazotized paper. Using differentiated neuroblastoma cells as the protein sample and a heterogeneous anti-microtubule protein serum, antibodies were isolated that specifically bound only to tubulin on blots and that stained microtubule networks in cells. The general utility of this method for various types of applications is discussed.

A modification of the diffusion-in-gel enzyme-linked immunosorbent assay (DIG-ELISA) and the diffusion-in-gel thin layer immunoassay (DIG-TIA) using paper discs impregnated with blood or serum as source of diffusion is described. Using a BSA-anti-BSA model system the suitability of this sampling and assaying technique for simple and accurate quantitation of antibodies has been demonstrated. Paper discs impregnated with blood or serum and subsequently dried could be stored at temperatures between +4 degrees C and +37 degrees C for at least six weeks without significant loss of antibody activity. Application of paper disc DIG-ELISA was exemplified by assaying anti-BSA antibodies in rabbits immunized with BSA as well as antibodies against both soluble egg antigen and adult worm extract in mice experimentally infected with Schistosoma mansoni cercariae. The simplicity and good reproducibility of this technique should make it an attractive alternative in serological screening of large population groups. Definite advantages of this technique are the possibilities to analyse quantitatively antibodies in capillary blood, rather than serum from venous blood samples, and to store sampled material for a considerable time even under such climatic conditions as often prevail in tropical countries.

Antigliadin antibodies (AGA) were analyzed by immunoblotting from the sera of 30 patients with dermatitis herpetiformis (DH) and of 13 patients with gluten-sensitive enteropathy (GSE). The results were correlated to the jejunal morphology and to the serum AGA values as quantified with an enzyme-linked immunosorbent assay (ELISA). Immunoblotting analysis disclosed a distinct pattern of AGA which was similar in patients with DH and GSE. In both diseases individual variation in IgG class AGA patterns was large, suggesting that several antigenic determinants are involved in the AGA response. The IgA class AGA pattern was clearly more homogeneous. The sera with several bands in immunoblotting had the highest AGA levels in ELISA. Strong staining in the main gliadin area (bands from 31 to 38 kd) indicated severely damaged intestinal mucosa whereas the serum of DH patients with partial villous atrophy or normal mucosa showed usually weaker staining. The immunoblotting pattern of sera from healthy controls was even weaker but was directed against the same polypeptides as in the patients suggesting a quantitative rather than qualitative difference between healthy and diseased subjects. This difference was, however, more obvious in the IgA than in the IgG class AGA pattern possibly indicating a more fundamental defect in the regulation of synthesis of IgA isotype in DH and GSE.

We present a simple, efficient and rapid method for affinity-purifying antibodies from a relatively crude antiserum in quantities large enough to screen a DNA expression library. The method presents a very convenient way to remove crossreacting or contaminating antibody specificities. The affinity matrix, antigen non-covalently bound to nitrocellulose, is prepared by the electrophoretic separation of antigen by sodium dodecyl sulphate-polyacrylamide gel electrophoresis, followed by the transfer of antigen to nitrocellulose. The matrix can be used repeatedly. A brief wash with 6 M guanidine hydrochloride is included between steps to remove residual antibodies which bind with high affinity to nitrocellulose-bound antigen. Various buffer solutions were assessed as antibody/antigen-dissociating agents. Glycine/HCl buffer, pH 2.5, appeared to be the most efficient in our hands, although a number of other less efficient dissociating reagents, including 4.5 M magnesium chloride, pH 7.5, 6 M urea, pH 7, and 0.05 M diethylamine, pH 11.5, also could be used; these may be the elution conditions of choice for other antibody/antigen combinations. The use of affinity-purified antibody solutions instead of the corresponding antisera gave increased signal-to-noise ratios with the detection systems that are commonly used to identify positive signals in screening expression libraries. Protein A- and goat anti-rabbit-alkaline phosphatase conjugates gave the most sensitive signals.

Plasminogen activator inhibitor (PAI) purified from human placenta was compared to PAI purified from conditioned cell culture fluid of the human fibrosarcoma cell line HT-1080. The two inhibitors had a similar mobility (Mr approximately 50,000) in sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE). Purified placental inhibitor revealed 2 major and 1 minor Coomassie blue stainable bands, while the fibrosarcoma inhibitor appeared as one band. By immunoblotting analysis both monoclonal and polyclonal antibodies against each of the inhibitors showed reaction with the inhibitor against which they were raised, but not cross reaction with the other inhibitor. Similar results were obtained, when antibody binding was tested by ELISA with the inhibitors coated on the solid phase. HPLC fingerprint patterns of cyanogen bromide fragments of the two inhibitors were different. The inhibitory activity of the placental PAI was decreased by a factor of 3 after incubation with SDS, while that of the fibrosarcoma PAI was increased by a factor of 30. It is concluded that the two inhibitors show no detectable common antigenic determinants and most likely are products of different genes.

The rapid spread of SARS-CoV-2 caused the COVID-19 pandemic and accelerated vaccine development to prevent the spread of the virus and control the disease. Given the sustained high infectivity and evolution of SARS-CoV-2, there is an ongoing interest in developing COVID-19 serology tests to monitor population-level immunity. To address this critical need, we designed a paper-based multiplexed vertical flow assay (xVFA) using five structural proteins of SARS-CoV-2, detecting IgG and IgM antibodies to monitor changes in COVID-19 immunity levels. Our platform not only tracked longitudinal immunity levels but also categorized COVID-19 immunity into three groups: protected, unprotected, and infected, based on the levels of IgG and IgM antibodies. We operated two xVFAs in parallel to detect IgG and IgM antibodies using a total of 40 μL of human serum sample in