Search

Objective: To evaluate current studies to establish and compare the efficacy of traditional and laser acupuncture in reducing the signs and symptoms of temporomandibular disorders (TMD)., Methods: PubMed, Cochrane, Scopus, and Web of Science databases were searched. Clinical, controlled, and randomized trials written in English and having used traditional or laser acupuncture as therapy for TMD and RDC/TMD or DC/TMD as a diagnostic criterion for TMD were included., Results: Six studies that evaluated the intensity of pain and the level of mouth opening of the patients submitted to acupuncture were selected, and all showed improvement. However, similar results were also observed in the groups treated with occlusal splint and placebo acupuncture. Only one study evaluated laser acupuncture and showed a higher proportion of patients with remission of symptoms in the experimental group., Conclusion: The traditional acupuncture seems to relieve the signs and symptoms of TMD, as well as laser acupuncture when associated with occlusal splint. However, more rigorous and high-quality clinical trials are needed.

Objective : To evaluate, in the short term, the effectiveness of conservative therapies in pain, quality of life, and sleep in TMD patients. Methods : Eighty-nine TMD patients diagnosed by RDC-TMD were distributed in occlusal splints (OS; n= 24), manual therapy (MT; n= 21), counseling (C; n= 19), and OS associated with C (OSC; n= 25) therapy groups. Data collection was performed at baseline and within one month by VAS (pain), PSQI (sleep quality -SQ), WHOQOL-BREF (Quality of life - QL) and OHIP-14 (quality of life related to oral health -QLOH). The Split Plot ANOVA test was used to observe the difference between groups and over time. Results : All therapies were effective over time, improving pain (p< .001), SQ (p=.001), QLOH (p< .001), and QL (p= .006), but not between them. Discussion : The therapies were effective in improving pain, SQ, and quality of life; however, no therapeutic group was superior to the other.

Objetive: To evaluate the effects of Chinese scalp acupuncture in patients diagnosed with temporomandibular disorders (TMD) on pain, sleep, and quality of life (QOL), and compare these results with the results from traditional therapies., Methods: Sixty patients diagnosed with TMD using the research diagnostic criteria for temporomandibular disorders (RDC/TMD) were allocated into four treatment groups: counseling (C = 15), occlusal splint (OS = 15), scalp acupuncture (SA = 15), and manual therapy (MT = 15). Participants were re-evaluated within 1 month. Three questionnaires were used to access sleep disorders, QOL, and pain: The Pittsburgh Sleep Quality Index (PSQI), World Health Organization Quality of Life (WHOQOL-bref), and the Visual Analogue Scale (VAS), respectively. The data obtained were analyzed using the Statistical Package for the Social Science program (SPSS 22.0)., Results: The SA group significantly improved pain (P = .015), as well as the OS (P = .01) and MT groups (P = .014). Only the OS (P = .002) and MT (P = .029) groups improved sleep. MT group significantly improved QOL in terms of the physical domain of the WHOQOL-bref (P = .011) and the OS group in the psychological domain (P = .012)., Conclusions: The scalp acupuncture proved to be another alternative for pain relief in patients with TMD, demonstrating positive results in the short term. However, it was not as effective in improving quality of life and sleep., (© The Author(s) 2021. Published by Oxford University Press on behalf of the American Academy of Pain Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.)

Introduction: Temporomandibular dysfunction (TMD) is a condition that affects the stomatognathic system., Objective: To determine the effect of treatment with an occlusal splint (OS), manual therapy (MT), counselling (CS) and the combination of an occlusal splint and counselling (OSCS) on pain and anxiety in patients with TMD., Materials and Methods: A randomised clinical trial was conducted with 89 patients diagnosed with TMD through RDC/TMD (Research Diagnostic Criteria for Temporomandibular Disorders) and divided into four groups of treatment: OSCS (n = 25); OS (n = 24); MT (n = 21); and CS (n = 19). Participants were assessed before and after 1 month of therapy for pain, anxiety and TMD diagnosis. Pain was measured by a visual analogue scale. To assess anxiety, Hospital Anxiety and Depression Scale (HADS), Beck Anxiety Inventory (BAI) and the State-Trait Anxiety Inventory (STAI-S and T) were used. The data were analysed using SPSS (Statistical Package for Social Science) 22.0., Results: The four groups obtained a significant reduction (P < 0.001) in the pain after 1 month of treatment. Treatment in all groups promoted a significant reduction in anxiety symptoms 1 month after completion, HADS (P < 0.001), BAI (P < 0.001), STAI-T (P = 0.006). Thus, no group was superior to the other in reducing the studied variables., Conclusion: The therapies used were effective in reducing pain and anxiety in patients diagnosed with TMD. However, no treatment was superior to the other in reducing the studied variables., (© 2020 FDI World Dental Federation.)

The aim of this study was to evaluate stress distribution on the peri-implant bone, simulating the influence of Nobel Select implants with straight or angulated abutments on regular and switching platform in the anterior maxilla, by means of 3-dimensional finite element analysis. Four mathematical models of a central incisor supported by external hexagon implant (13 mm × 5 mm) were created varying the platform (R, regular or S, switching) and the abutments (S, straight or A, angulated 15°). The models were created by using Mimics 13 and Solid Works 2010 software programs. The numerical analysis was performed using ANSYS Workbench 10.0. Oblique forces (100 N) were applied to the palatine surface of the central incisor. The bone/implant interface was considered perfectly integrated. Maximum (σmax) and minimum (σmin) principal stress values were obtained. For the cortical bone the highest stress values (σmax) were observed in the RA (regular platform and angulated abutment, 51 MPa), followed by SA (platform switching and angulated abutment, 44.8 MPa), RS (regular platform and straight abutment, 38.6 MPa) and SS (platform switching and straight abutment, 36.5 MPa). For the trabecular bone, the highest stress values (σmax) were observed in the RA (6.55 MPa), followed by RS (5.88 MPa), SA (5.60 MPa), and SS (4.82 MPa). The regular platform generated higher stress in the cervical periimplant region on the cortical and trabecular bone than the platform switching, irrespective of the abutment used (straight or angulated).

The aim of this study was to evaluate stress distribution of the peri-implant bone by simulating the biomechanical influence of implants with different diameters of regular or platform switched connections by means of 3-dimensional finite element analysis. Five mathematical models of an implant-supported central incisor were created by varying the diameter (5.5 and 4.5 mm, internal hexagon) and abutment platform (regular and platform switched). For the cortical bone, the highest stress values (σmax and σvm) were observed in situation R1, followed by situations S1, R2, S3, and S2. For the trabecular bone, the highest stress values (σmax) were observed in situation S3, followed by situations R1, S1, R2, and S2. The influence of platform switching was more evident for cortical bone than for trabecular bone and was mainly seen in large platform diameter reduction.

Ceramics have been widely used for esthetic and functional improvements. The resin cement is the material of choice for bonding ceramics to dental substrate and it can also dictate the final esthetic appearance and strength of the restoration. The correct use of the wide spectrum of resin luting agents available depends on the dental tooth substrate. This article presents three-year clinical results of a 41 years old female patient B.H.C complaining about her unattractive smile. Two all-ceramic crowns and two laminates veneers were placed in the maxillary incisors and cemented with a self-adhesive resin luting cement and conventional resin luting cement, respectively. After a three-year follow-up, the restorations and cement/teeth interface were clinically perfect with no chipping, fractures or discoloration. Proper use of different resin luting cements shows clinical appropriate behavior after a three-year follow-up. Self-adhesive resin luting cement may be used for cementing all-ceramic crowns with high predictability of success, mainly if there is a large dentin surface available for bonding and no enamel at the finish line. Otherwise, conventional resin luting agent should be used for achieving an adequate bonding strength to enamel.

The aim of this study was to evaluate the influence of the high values of insertion torques on the stress and strain distribution in cortical and cancellous bones. Based on tomography imaging, a representative mathematical model of a partial maxilla was built using Mimics 11.11 and Solid Works 2010 softwares. Six models were built and each of them received an implant with one of the following insertion torques: 30, 40, 50, 60, 70 or 80 Ncm on the external hexagon. The cortical and cancellous bones were considered anisotropic. The bone/implant interface was considered perfectly bonded. The numerical analysis was carried out using Ansys Workbench 10.0. The convergence of analysis (6%) drove the mesh refinement. Maximum principal stress (δmax) and maximum principal strain (εmax) were obtained for cortical and cancellous bones around to implant. Pearson's correlation test was used to determine the correlation between insertion torque and stress concentration in the periimplant bone tissue, considering the significance level at 5%. The increase in the insertion torque generated an increase in the δmax and εmax values for cortical and cancellous bone. The δmax was smaller for the cancellous bone, with greater stress variation among the insertion torques. The εmax was higher in the cancellous bone in comparison to the cortical bone. According to the methodology used and the limits of this study, it can be concluded that higher insertion torques increased tensile and compressive stress concentrations in the periimplant bone tissue.

Unlabelled: Hearing loss has been described in patients undergoing chemotherapy, given the ototoxic nature of these drugs. An audiological investigation is relevant in such cases., Aim: to assess audibility thresholds at high frequencies in individuals with cancer that was treated successfully with cisplatin and its associations, to verify possible hearing loss as a side effect of therapy. Site and date of the study: Campinas, Sao Paulo, in 2006., Material and Method: Ten volunteers aged between 5 and 27 years were assessed by a clinical history, otoscopy, and conventional and high frequencies audiometry in this clinical and experimental study., Results: A kappa coefficient statistical analysis revealed significant differences between ears in 50% of 14 frequencies that were evaluated. Eight participants presented hearing losses, which started at 1 kHz, increasing markedly at 6 kHz and above. Fisher's Exact Test revealed a significant association only with the dose and the right ear at high frequencies., Conclusion: It is possible that the hearing loss detected in this study is at least partially due to the ototoxicity of antineoplastic drugs; such loss may occur even after treatment is interrupted. We suggest that a protocol for audiological follow-up of patients undergoing chemotherapy should be created.

Unlabelled: Research considers high frequency tonal audiometry as a tool for the early diagnosis of auditory alterations derived from etiological agents., Aim: to investigate possible differences in high frequency audiometry of individuals with normal hearing, based on the person who places the earphone., Patients and Method: clinical and experimental study with 55 undergraduate students from a country side branch of the São Paulo State University, with normal hearing, underwent two tests each; for the first, the evaluator positioned the earphone on the participant; for the second one, the participant did it by him/herself. An AC40 audiometer calibrated to emit pure tone was used in the frequencies of 10, 12.5, and 16 kHz., Results: The kappa(k) coefficient statistical analysis was used to verify the agreement between the two ways of earphone positioning of earphone, bearing a [FORMULA: SEE TEXT]0.70 kappa value as a criterion. Results attained for both ears were below this criterion, with k average of 0.50., Discussion: results indicate a risk of compromising the exam reliability when the patient him/herself adjusts phone to his/her own ear., Conclusion: when performing audiometric assessment, this variable must be considered in order to attain reliable results.