Search

This paper presents the results of field tests performed to investigate the installation effects of pre-bored grouted planted (PGP) pile in deep clayey soil. The variation of horizontal soil displacements, excess pore water pressures and lateral soil pressures was measured in the PGP pile installation process. The test results show that the drilling and grouting process induced large horizontal soil displacements in the soil within a radial distance of 2 d (d is pile diameter), and the maximum horizontal soil displacements induced by the drilling and grouting process were smaller than 15.9 mm when the radial distance reached 4–5 d. Moreover, the horizontal soil displacements decreased along the soil layer depth, as the superficial soil layers were of small deformation modulus and lateral soil pressure. The drilling process brought large excess pore water pressures in the soil when the radial distance was less than 3 d, and the excess pore water pressures induced by the drilling stage were all less than 55 kPa when the radial distance reached 4–6 d. The drilling process also induced some lateral soil pressure increases in the soil within a radial distance of 3 d, while the measured maximum lateral soil pressure increases were smaller than 10.9 kPa when the radial distance increased to 4 d. On the whole, the excess pore water pressures and lateral soil pressure increases induced by the installation of PGP pile were much smaller than that induced by the installation of driven PHC pile. Moreover, the horizontal soil displacements, excess pore water pressures and lateral soil pressure increases induced by the installation of PGP pile all recovered rapidly after the installation of pile, as the cemented soil in the pile hole was in liquid state after the drilling and grouting stage. [ABSTRACT FROM AUTHOR]