Search

Reconstructing the Paleogene topography and climate of central Tibet informs understanding of collisional tectonic mechanisms and their links to climate and biodiversity. Radiometric dates of volcanic/sedimentary rocks and paleotemperatures based on clumped isotopes within ancient soil carbonate nodules from the Lunpola Basin, part of an east-west trending band of basins in central Tibet and now at 4.7 km, suggest that the basin rose from 4.0 km by 29 Ma. The height change is quantified using the rates at which wet-bulb temperatures ( T w ) decline at land surfaces as those surface rise. In this case, T w fell from ~8°C at ~38 Ma to ~1°C at 29 Ma, suggesting at least ~2.0 km of surface uplift in ~10 Ma under warm Eocene to Oligocene conditions. These results confirm that a Paleogene Central Tibetan Valley transformed to a plateau before the Neogene.

The accurate temperature measurement of high-power laser diode arrays is a considerable challenge due to their large temperature gradient and package structure. In this study, experiments based on the forward voltage method were set up to measure the transient temperature behavior of chips after the removal of heating load. A hybrid experimental/numerical method was developed to calculate multiple unknown interface thermal resistances and improve the prediction of the temperature distribution of high-power laser diode arrays by analyzing the transient temperature behavior of chips. The largest deviation between numerical and experimental results is 1.3 K. Based on the numerical results, thermal resistances for different layers and temperature distribution inside the chip were obtained and evaluated. Some suggestions for improving the thermal design of high-power laser diode arrays were derived.

Considerable attention has recently been given to the new environment-friendly refrigerant of R1234ze(E) for applications such as heat pump and air-conditioning systems. In this study, an experiment was carried out to investigate two-phase flow patterns and flow transitions for R1234ze(E) in a smooth horizontal tube with an inner diameter of 6 mm. The experiments were performed at conditions covering saturation pressures from 0.215 to 0.415 MPa, mass fluxes from 130 to 258 kg/m2 s and heat fluxes from 10.6 to 74.8 kW/m2. The influences of saturation pressure, mass flux and heat flux on flow pattern transition were analyzed. Six well-known flow maps have been compared with the observed flow patterns of R1234ze(E). The results indicated that none of them can predict all the flow pattern transitions well. Thus, three dimensionless numbers K1, K2 and K3 which represent the ratio of the evaporation momentum force to the inertia force, the evaporation momentum force to the surface tension force, and the shear force to the gravity force respectively were introduced. Based on dimensionless numbers K1, K2, K3 and Xtt, a new flow pattern map for R1234ze(E) was proposed which could accurately predict the experimental data.

Land subsidence induced by excessive groundwater withdrawal has caused serious social, geological, and environmental problems in Beijing. Rapid increases in population and economic development have aggravated the situation. Monitoring and prediction of ground settlement is important to mitigate these hazards. In this study, we combined persistent-scatterer interferometric synthetic aperture radar with Grey system theory to monitor and predict land subsidence in the Beijing plain. Land subsidence during 2003–2014 was determined based on 39 ENVISAT advanced synthetic aperture radar (ASAR) images and 27 RadarSat-2 images. Results were consistent with global positioning system, leveling measurements at the point level and TerraSAR-X subsidence maps at the regional level. The average deformation rate in the line-of-sight was from −124 to 7 mm/year. To predict future subsidence, the time-series deformation was used to build a prediction model based on an improved Grey-Markov model (IGMM), which adapted the conv...

Mixed-refrigerant Joule-Thomson refrigeration (MJTR) systems have distinct advantages in the temperature range from 80 to 230 K. Tetrafluoromethane (R14) and ethane (R170) are essential components of mixed-refrigerants. In this paper, the adiabatic flow pattern map for R14/R170 mixtures was firstly developed based on previous flow pattern data. Then an experimental investigation on condensation two-phase flow patterns for R14/R170 mixtures (0.193/0.0.807, 0.437/0.563, 0.632/0.368 and 0.799/0.201 by mole) in a horizontal smooth tube with inner diameter of 4 mm was presented. Experiments were carried out at mass fluxes from 100 to 350 kg m−2s−1, saturation pressures from 1.5 to 2.5 MPa and heat fluxes from 8.4 to 42.2 kW m−2 over the entire range of vapor quality. The effects of mass flux, saturation pressure, heat flux and concentration on flow pattern evolutions were discussed and presented. Analysis results indicated that mass transfer resistance and heat flux account for the nonequilibrium effects of zeotropic mixture condensation, which leads to the different evolutionary trends between condensation and adiabatic two-phase flow. Finally, a new condensation flow pattern map was deduced by containing nonequilibrium effects into adiabatic flow pattern map.

Microchannels have an excellent thermal performance but they acquire a large pressure drop. Recent studies show that microchannels with superhydrophobic surfaces may provide an innovative approach to achieve a balance between thermal and hydraulic performances. In this work, the fluid flow and heat transfer in microtube with superhydrophobic surfaces are analyzed at fully developed laminar flow, and the formulas of fRe and Nu are obtained. Comparisons of thermal resistances on superhydrophobic and smooth microtubes are performed at identical flow rate, pressure drop and pumping power, respectively. At indentical flow rate, superhydrophobic surface can’t enhance the thermal-hydraulic performance. At identical pressure drop or pumping power, the critical pressure drop and pumping power exist respertively, which is the boundary point of the thermal-hydraulic performance between superhydrophobic and smooth microtubes. The critical parameters are deduced to help determining whether superhydrophobic surfaces enhance thermal-hydraulic performance.

BACKGROUND Endogenous nitric oxide and adenosine increase simultaneously to keep the balance of energy demand and supply when the oxygen supply is insufficient, which suggests that nitric oxide and adenosine might exert a synergistic myoprotection during tissue hypoxia. In this study, we tested this hypothesis utilizing a canine model of prolonged global myocardial ischaemic reperfusion injury. METHODS In this double blind, controlled study, the hearts of 24 anaesthetized mongrel dogs were arrested for 2 hours with aortic cross clamping and blood cardioplegia. The treatment groups were those supplemented with 2 mmol/L L-arginine (ARG), supplemented with 1 mmol/L adenosine (ADO), ARG + ADO supplemented with both, and no supplementation (control) (n = 6 in each group). Haemodynamics, biochemical indices, adenosine triphosphate (ATP) content and myeloperoxidase activities of myocardium were determined to evaluate myocardial injury. Statistical comparison was performed by two way ANOVA. RESULTS Although the requirements for inotropic supports were higher, the cardiac outputs were lower in control group than in ARG, ADO and the combination groups. Plasma cardiac troponin I levels were higher and the areas of hydropic changes were larger in control group than in ARG and ADO groups. Combination of arginine and adenosine provided further myoprotection with respect to better cardiac performance, lower release of cardiac troponin I, and smaller areas of hydropic changes compared with ARG and ADO groups. ATP content was higher, but myeloperoxidase activities of myocardium were significantly lower in the combination group than in control, ARG and ADO groups (P < 0.05). CONCLUSIONS Combination of L-arginine and adenosine provides synergistic myoprotection in a canine model of global myocardial ischaemia. Thus, the combination is recommended when the heart is exposed to a prolonged ischaemia during cardiac surgery.

Fiber nonlinearity of optical orthogonal frequency division multiplexed (OFDM) system restricts the capacity improvement of optical fiber transmission. In this paper, we propose a novel digital coherent superposition (DCS) scheme to improve the tolerance to fiber nonlinearity in a coherent optical orthogonal frequency division multiplexed system. In simulation, 71.53 Gbit/s orthogonal frequency division multiplexed signal per channel with Hermitian symmetry is transmitted over 400 km standard single mode fiber in a wave division multiplexed-polarization-division multiplexed-coherent optical orthogonal frequency division multiplexed system with five channels. The 4-quadrature amplitude modulation is used for symbol mapping. For the receiver, after the conventional OFDM signal processing, we conduct DCS for OFDM subcarrier pairs, which requires only conjugation and summation in the x, y polarization direction, respectively. Firstly, the channel spacing is 25 GHz, the maximum signal-to-noise ratio improvement is 9.05 dB or 6.02 dB with or without symmetric dispersion compensation compared with a conventional orthogonal frequency division multiplexed system. The optimum launch power is increased by 2 dB. Secondly, the channel spacing is changed to 50 GHz to investigate the nonlinearity tolerance at different channel spacings in the wave division multiplexed system, the maximum signal-to-noise ratio improvement is 8.75 dB or 4.9 dB with or without symmetric dispersion compensation, respectively. Theoretical and simulation analysis show that the proposed method in this paper can effectively mitigate the first-order nonlinear distortions and hence improve the tolerance of coherent optical orthogonal frequency division multiplexed system with different channel spacings to fiber nonlinear effects.