Search

Art authentication is the process of identifying the artist who created a piece of artwork and is manifested through events of provenance, such as art gallery exhibitions and financial transactions. Art authentication has visual influence via the uniqueness of the artist’s style in contrast to the style of another artist. The significance of this contrast is proportional to the number of artists involved and the degree of uniqueness of an artist’s collection. This visual uniqueness of style can be captured in a mathematical model produced by a machine learning (ML) algorithm on painting images. Art authentication is not always possible as provenance can be obscured or lost through anonymity, forgery, gifting, or theft of artwork. This paper presents an image-only art authentication attribute marker of contemporary art paintings for a very large number of artists. The experiments in this paper demonstrate that it is possible to use ML-generated models to authenticate contemporary art from 2368 to 100 artists with an accuracy of 48.97% to 91.23%, respectively. This is the largest effort for image-only art authentication to date, with respect to the number of artists involved and the accuracy of authentication.

Introduction Multiple abortions are consistently associated with adverse health consequences. Prior abortion is a known risk factor for another abortion. Objective To determine the persistence of the association of a first-pregnancy abortion with the likelihood of subsequent pregnancy outcomes. Methods Data was extracted for a study population of 5453 continuously eligible Medicaid beneficiaries in states which funded and reported elective abortions 1999–2015. Women age 16 in 1999 were organized into three cohorts based upon the first pregnancy outcome: abortion, birth, natural loss. Results Women in the abortion cohort are more likely than those in the birth cohort to experience another abortion rather than a birth or natural loss, and less likely to experience a live birth rather than an abortion or natural loss, for every subsequent pregnancy. The tendency toward abortion (OR 2.99, CL 2.02-4.43) and away from birth (OR 0.49, CL 0.39-0.63) peaks at the sixth pregnancy, but persists throughout the reproductive period ages 16–32. The pattern is reversed, but similarly consistent, for women in the birth cohort. They remain likelier to have another birth rather than an abortion or natural loss in subsequent pregnancies. Compared to the birth cohort, the abortion cohort had 1.35 times as many pregnancies: 4.31 times the abortions, 1.53 times the natural losses, but only 0.52 times the births. They were 4.3 and 5.0 times as likely to have 2-plus and 3-plus abortions, but only 0.47 times and 0.31 times as likely to have 2-plus and 3-plus births. Of the abortion cohort, 37.1% had no births. By contrast, 73.6% of the birth cohort had no abortions. Conclusion The first-pregnancy abortion maintains a strong and persistent association with the likelihood of another abortion in subsequent pregnancies, enabling a cascade of adverse events associated with multiple abortions.

Structured data on customer feedback is becoming more costly and timely to collect and organize. On the other hand, unstructured opinionated data, e.g., in the form of free-text comments, is proliferating and available on public websites, such as social media websites, blogs, forums, and websites that provide recommendations. This research proposes a novel method to develop a knowledge-based recommender system from unstructured (text) data. The method is based on applying an opinion mining algorithm, extracting aspect-based sentiment score per text item, and transforming text into a structured form. An action rule mining algorithm is applied to the data table constructed from sentiment mining. The proposed application of the method is the problem of improving customer satisfaction ratings. The results obtained from the dataset of customer comments related to the repair services were evaluated with accuracy and coverage. Further, the results were incorporated into the framework of a web-based user-friendly recommender system to advise the business on how to maximally increase their profits by introducing minimal sets of changes in their service. Experiments and evaluation results from comparing the structured data-based version of the system CLIRS (Customer Loyalty Improvement Recommender System) with the unstructured data-based version of the system (CLIRS2) are provided.

The paper presents elastic properties of liquid crystals, especially their nematic phase. Anoutline of a development of theories describing these properties is given. The model describing liquidcrystal as continuous medium is formulated. The curvature theory of elasticity of nematic liquidcrystals based on Zocher – Oseen – Frank’s approach is discussed in details. In this way, essentialelastic properties of nematics as well their relative material parameters are described.Keywords: liquid crystals, nematics, elastic properties, deformations, continuous medium

Objective: Dental hypersensitivity remains widespread, underscoring the need for materials that can effectively seal dental tubules. This study evaluated the potential of bioactive-glass-infused hydroxyethyl cellulose gels in this context. Methods: Five gels were synthesized, each containing 20% bioactive glass (specifically, 45S5, S53P4, Biomin F, and Biomin C), with an additional blank gel serving as a control. Subjected to two months of accelerated aging at 37 ± 2 °C, these gels were assessed for key properties: viscosity, water disintegration time, pH level, consistency, adhesion to glass, and element release capability. Results: Across the board, the gels facilitated the release of calcium, phosphate, and silicon ions, raising the pH from 9.00 ± 0.10 to 9.7 ± 0.0—a range conducive to remineralization. Dissolution in water occurred within 30–50 min post-application. Viscosity readings showed variability, with 45S5 reaching 6337 ± 24 mPa/s and Biomin F at 3269 ± 18 mPa/s after two months. Initial adhesion for the blank gel was measured at 0.27 ± 0.04 Pa, increasing to 0.73 ± 0.06 Pa for the others over time. Gels can release elements upon contact with water (Ca− Biomin C 104.8 ± 15.7 mg/L; Na− Biomin F 76.30 ± 11.44 mg/L; P− Biomin C 2.623 ± 0.393 mg/L; Si− 45S5-45.15 ± 6.77mg/L, F− Biomin F− 3.256 ± 0.651mg/L; Cl− Biomin C 135.5 ± 20.3 mg/L after 45 min). Conclusions: These findings highlight the gels’ capacity to kickstart the remineralization process by delivering critical ions needed for enamel layer reconstruction. Further exploration in more dynamic, real-world conditions is recommended to fully ascertain their practical utility.

Abstract This study aimed to prepare a bioactive acrylic material by adding different types of glasses. Commercially available polymerized acrylic resin was mixed with 10% of four different types of glasses in the powder form and cured. Flexural strength, sorption, and solubility of the samples were tested according to ISO 20795-1:2013. The total number of samples used in the tests were 60. The materials were placed in artificial saliva of pH 4 and 7, and elution was performed for 0, 1, 28, and 42 days. The collected samples were analyzed using inductively coupled plasma atomic emission spectrometry to detect Ca, P, and Si ions and using ion chromatography to detect F ions. The materials obtained after modification with glasses showed lower compressive strength compared with pure polymethyl methacrylate but met the standard requirements. Two glass types showed higher solubility values compared with the value defined by the ISO standard. Biomin C and S53P4 released Ca, P, and Si ions, respectively, after 42 days in artificial saliva. Acrylic resins modified with 10% Biomin C and S53P4 glasses can be a valuable source of Ca and P ions under acid conditions for 28 and 42 days.

The colonisation of the surface of removable acrylic dentures by various types of microorganisms can lead to the development of various diseases. Therefore, the creation of a bioactive material is highly desirable. This study aimed to develop a denture base material designed to release bioactive ions into the oral environment during use. Four types of bioactive glasses (BAG)—S53P4, Biomin F, 45S5, and Biomin C—were incorporated into the PMMA acrylic resin, with each type constituting 20 wt.% (10 wt.% non-silanised and 10% silanised) of the mixture, while PMMA acrylic resin served as the control group. The specimens were subsequently immersed in distilled water, and pH measurements of the aqueous solutions were taken every seven days for a total of 38 days. Additionally, surface roughness and translucency measurements were recorded both after preparation and following seven days of immersion in distilled water. The cytotoxicity of these materials on human fibroblast cells was evaluated after 24 and 48 h using Direct Contact and MTT assays. Ultimately, the elemental composition of the specimens was determined through energy-dispersive X-ray (EDX) spectroscopy. In general, the pH levels of water solutions containing BAG-containing acrylics gradually increased over the storage period, reaching peak values after 10 days. Notably, S53P4 glass exhibited the most significant increase, with pH levels rising from 5.5 to 7.54. Surface roughness exhibited minimal changes upon immersion in distilled water, while a slight decrease in material translucency was observed, except for Biomin C. However, significant differences in surface roughness and translucency were observed among some of the BAG-embedded specimens under both dry and wet conditions. The composition of elements declared by the glass manufacturer was confirmed by EDX analysis. Importantly, cytotoxicity analysis revealed that specimens containing BAGs, when released into the environment, did not adversely affect the growth of human gingival fibroblast cells after 48 h of exposure. This suggests that PMMA acrylics fabricated with BAGs have the potential to release ions into the environment and can be considered biocompatible materials. Further clinical trials are warranted to explore the practical applications of these materials as denture base materials.

The paper presents basic types of liquid-crystalline phases obtained in different ways and supermolecular arrangement in those phases. Characteristic features of molecular structure of mesogens are discussed, moreover their influence on liquid-crystalline properties are described too. Examples of the effect of intermolecular interactions on the phase situation of a liquid crystal are given. Keywords: liquid crystals, mesophases, polymorphism, mesogens, molecular structure

A historical view of studies on liquid crystals is presented. Application of those materials are also taken into account. Special attention is paid to the studies conducted at Polish scientific centres since the thirties of the last century till now. Keywords: liquid crystals, physical properties, material science, liquid crystal displays

Theories of a mean molecular field developed for nematic liquid crystals are discussed. Their advantages and disadvantages are highlighted. The role of the order parameter in the description of a liquid crystalline phase is shown. The role of molecular dipole moments is underlined. Keywords: liquid crystals, order parameter, molecular theories, molecular dipole moment

Disinfection of alginate impressions used in dental prosthetics is a very problematic procedure, during which the dimensions of the obtained model can change, and it can be easily mechanically damaged. Therefore, it would be beneficial to create a material with bacteriostatic properties for this application. In this work, we investigated alginate materials with the addition of 0.25–1.0 wt% of zirconium phosphate-based ion exchange resin containing silver and compared them with commercial alginate impression products. The obtained materials passed the normative requirements of ISO 21563:2021 (setting time, elastic recovery, strain in compression, compatibility with gypsum, detail reproduction, tearing strength, and linear dimensional change) as well as bacteriostatic properties in relation to Streptococcus mutans. The newly developed alginate materials met all the properties required by the standards. Their setting time was comparable to the commercial materials, and their 24 h contraction did not exceed 1.3%. Furthermore, the tearing strength was 0.42–0.48 MPa, less than that of the comparative commercial materials (0.52–0.56 MPa). From the point of view of clinical practice, it will be possible to create an alginate material with bacteriostatic properties that will prevent the transmission of cross-infections.

Background: The denture-base acrylic resins used by partially edentulous patients can cause local demineralization of teeth. Alkali ions released from the bioactive materials that were added to acrylic resins can increase the pH of the oral environment and slow down the demineralization process. Aim of the study: This study aimed to create a new denture-base acrylic resin that can release ions. Materials and methods: A total of 222 samples with different fillers (calcium hydrogen phosphate, hydroxyapatite, two kinds of bioactive glasses, and a product obtained by reaction between bioactive glass formed from glass ionomer cement and polyacrylic acid) were prepared for the study. All the materials were tested for mechanical properties and their use as phosphate donors for 3 weeks. The measurements were presented as mean ± SD error of the mean. Data were analyzed by two-way analysis of variance, with a p-value of

Introduction: Tissue conditioners have been widely used in various clinical applications in dentistry, such as treating inflamed alveolar ridges, temporarily relining partial and complete dentures, and the acquisition of functional impressions for denture fabrication. This study aimed to investigate the mechanical properties of the most prevalent tissue conditioner materials on the market, including Tissue Conditioners (TC), Visco Gel (VG), and FITT (F). Materials and Methods: The three tissue conditioners, TC, VG, and F, were assessed based on the parameters mentioned above. The following tests were performed based on the ISO 10139-1 and ISO 10139-2 requirements: Shore A hardness, denture plate adhesion, sorption, water solubility, and contraction after 1 and 3 days in water. Additional tests are described in the literature, such as ethanol content and gelling time. The tests were carried out by storing the materials in water at 37 °C for 7 days. Results: The gel times of all tested materials exceeded 5 min (TC = 300 [s], VG = 350 [s]). In vitro, phthalate-free materials exhibited higher dissolution in water after 14 days (VG = −260.78 ± 11.31 µg/mm2) compared to F (−76.12 ± 7.11 µg/mm2) and experienced faster hardening when stored in distilled water (F = 33.4 ± 0.30 Sh. A, VG = 59.2 ± 0.60 Sh. A). They also showed greater contractions. The connection of all materials to the prosthesis plate was consistent at 0.11 MPa. The highest counterbalance after 3 days was observed in TC = 3.53 ± 1.12%. Conclusions: Materials containing plasticizers that are not phthalates have worse mechanical properties than products containing these substances. Since phthalates are not allowed to be used indefinitely in medical devices, additional research is necessary, especially in vivo, to develop safe materials with superior functional properties to newer-generation alternatives. In vitro results often do not agree fully with those of in vivo outcomes.

Restorative composites are subjected to various influences in the oral cavity environment, such as high or low temperatures, the mechanical force generated during mastication, colonization of various microorganisms, and low pH, which may result from ingested food and the influence of microbial flora. This study aimed to investigate the effect of a recently developed commercial artificial saliva (pH = 4, highly acidic) on 17 commercially available restorative materials. After polymerization, the samples were stored in an artificial solution for 3 and 60 days and subjected to crushing resistance and flexural strength tests. The surface additions of the materials were examined in terms of the shapes and sizes of the fillers and elemental composition. When stored in an acidic environment, the resistance of the composite materials was reduced by 2–12%. Larger compressive and flexural strength resistance values were observed for composites that could be bonded to microfilled materials (invented before 2000). This may result from the filler structure taking an irregular form, which results in a faster hydrolysis of silane bonds. All composite materials meet the standard requirements when stored for a long period in an acidic environment. However, storage of the materials in an acid environment has a destructive impact on the materials’ properties.

Background: The creation of the denture base material with bioactive properties that releases ions and produces hydroxyapatite. Methods: Acrylic resins were modified by the addition of 20% of four types of bioactive glasses by mixing with powders. Samples were subjected to flexural strength (1, 60 days), sorption and solubility (7 days), and ion release at pH 4 and pH 7 for 42 days. Hydroxyapatite layer formation was measured using infrared. Results: Biomin F glass-containing samples release fluoride ions for a period of 42 days (pH = 4; Ca = 0.62 ± 0.09; P = 30.47 ± 4.35; Si = 22.9 ± 3.44; F = 3.1 ± 0.47 [mg/L]). The Biomin C (contained in the acrylic resin releases (pH = 4; Ca = 41.23 ± 6.19; P = 26.43 ± 3.96; Si = 33.63 ± 5.04 [mg/L]) ions for the same period of time. All samples have a flexural strength greater than 65 MPa after 60 days. Conclusion: The addition of partially silanized bioactive glasses allows for obtaining a material that releases ions over a longer period of time. Clinical significance: This type of material could be used as a denture base material, helping to preserve oral health by preventing the demineralization of the residual dentition through the release of appropriate ions that serve as substrates for hydroxyapatite formation.

Background: Color stability is a crucial performance parameter for dental restorations, and limited research exists on how surface preparation methods affect it. The purpose of this study was to test the color stability of three resins intended for 3D printing, which can be used to make dentures or crowns in A2 and A3 colors. Materials and Methods: Samples were prepared in the form of incisors; the first group was not subjected to any treatment after curing and washing with alcohol, the second was covered with light-curing varnish, and the third was polished in a standard way. Then, the samples were placed in solutions of coffee, red wine, and distilled water and stored in the laboratory. After 14, 30, and 60 days, color changes were measured (presented as Delta E) compared to material stored in the dark. Results: The greatest changes were observed for samples that were not polished, then were placed in red wine dilutions (ΔE = 18.19 ± 0.16). Regarding the samples covered with varnish, during storage, some parts detached, and the dyes penetrated inside. Conclusions: 3D-printed material should be polished as thoroughly as possible to limit the adhesion of dyes from food to their surface. Applying varnish may be a temporary solution.

This study was aimed at investigating poly(methyl methacrylate) (PMMA), modified with a silanized feldspar filler at 10 wt.% and 30 wt.%, as a dental material system for the production of prosthetic teeth. Samples of this composite were subjected to a compressive strength test, three-layer methacrylic teeth were fabricated with the said materials, and their connection to a denture plate was examined. The biocompatibility of the materials was assessed via cytotoxicity tests on human gingival fibroblasts (HGFs) and Chinese hamster ovarian cells (CHO-K1). The addition of feldspar significantly improved the material’s compressive strength, with neat PMMA reaching 107 MPa, and the addition of 30% feldspar raising it up to 159 MPa. As observed, composite teeth (cervical part made of neat PMMA, dentin with 10 wt.%, and enamel with 30 wt.% of feldspar) had good adhesion to the denture plate. Neither of the tested materials revealed any cytotoxic effects. In the case of hamster fibroblasts, increased cell viability was observed, with only morphological changes being noticed. Samples containing 10% or 30% of inorganic filler were determined to be safe for treated cells. The use of silanized feldspar to fabricate composite teeth increased their hardness, which is of significant clinical importance for the duration of use of non-retained dentures.

Introduction: The aim of this study was to test and find connection between three different parameters of acrylic resins: cytotoxicity, residual monomer content in the material and flexural strength. Materials and Methods: Superacryl Plus (SpofaDental, Czech Rep.) acrylic material has been polymerized in three different ways, short-time polymerization (45 minutes), normal time (90 minutes) and long-time (7 hours 30 minutes). Flexural strength was tested in compressive instrument Shimadzu for 65 × 10 × 3.3 mm samples. Then after 24 hours the samples were broken. In 50 mm diameter and 1 mm thick samples, residual monomer was determined by gas chromatography (according to ISO standard), and the last series of the sample was used to perform cytotoxicity tests (5 mm diameter). Statistical analysis: Data were analyzed by two-way ANOVA (in GraphPad Software Inc., San Diego, CA, USA), with p-value < 0.05 as statistically significant. Results: The results from the tests show that the greatest inhibition in the development of cell cultures (VERO CCL-81) by MTT assay), was observed for the sample polymerized in the first short-time method (73.49±10%). The material also had the largest content of residual monomer 2.02±0.08% (p-value < 0.01) and lowest flexural strength 71.53±2.26 MPa. Hardened acrylic resins over 60 minutes do not adversely affect cell cultures (undisturbed growth 83.18±10.72%). The residual monomer content was below 1% (p-value < 0.01) and the mechanical resistance to fracture was over 80 MPa (p-value < 0.01). Conclusion: The use of a short polymerization method of acrylic materials can adversely affect both the mechanical properties of the prosthesis itself and its biocompatibility. From a clinical point of view, it is important to take care about the polymerization times of acrylic. Dentures for allergic patients should be carried out in long-term polymerization when the content of residual monomer is as low as possible.

The aim of this study was to create a 3D printing material with bioactive properties that potentially could be used for a transparent removable orthodontic appliance. Materials and methods. To acrylic monomers, four bioactive glasses at 10% concentration were added, which release Ca, P, Si and F ions. The materials were printed on a 3D printer and tested for flexural strength (24 h and 30 days), sorption and solubility (7 days), ion release to artificial saliva pH = 4 and 7 (42 days) and cytotoxicity in the human fibroblast model. The released ions were determined by plasma spectrometry (Ca, P and Si ions) and ion-selective electrode (F measurement)s. Results: The material obtained released Ca2+ and PO43− ions for a period of 42 days when using glass Biomin C at pH 4. The flexural strength depended on the direction in which the sample was printed relative to the 3D printer platform. Vertically printed samples had a resistance greater than 20%. The 10% Biomin C samples post-cured for 30 min with light had a survival rate of the cells after 72 h of 85%.Conclusions. Material for 3D printing with bioactive glass in its composition, which releases ions, can be used in the production of orthodontic aligners.

The combination of two dissimilar materials has always been a serious problem in dentistry. In order to meet this challenge, it is necessary to combine both chemical methods (treatment with silanes, (meth)acrylic functional monomers) and the development of the surface of the joined material in a physical way, e.g., by sandblasting with alumina, alumina with silica, acid etching, the use of lasers and other means. The purpose of this literature review is to present all methods of joining dental composites with other materials such as ceramics, metal, another composite material. This review covers articles published within the period 2012–2022 in journals indexed in the PubMed database, written in English and describing joining different dental materials to each other. All the critical steps of new joint preparation have been addressed, including proper cleaning of the joint surface, the application of appropriate primers capable of forming a chemical bond between ceramics, zirconium oxide or metals and alloys, and finally, the application of new composite materials.

The aim of this study was to investigate the restorative connections of composite materials after fracture, under controlled conditions of treating the materials with novel, spherosilicate-based (SS) primers bearing both methacryl (MA) and trimethoxysilyl (TMOS) groups. The chemistry of methacrylate group insertion and reactive groups hydrolysis has been studied with the aid of 1H NMR (Nuclear Magnetic Resonance) spectroscopy. The light-cured resin composites were repaired by activating the connection site with the obtained primers and, for comparison, a silane (methacryloxypropyltrimethoxysilane, MATMOS) as a conventional coupling agent bearing the same reactive groups. The resistance of such a joint was tested in a three-point bending test after 24 h and 28 days period of sample conditioning. The effect of bond application was also studied, showing that spherosilicate-based primers may be used more effectively than MATMOS for two-step (primer-composite) restorative process, while for silane, the three-step process with bond application is crucial for satisfactory joint quality. The joint failure mode was determined by microscopic analysis and it was found that SS-4MA-4TMOS and SS-2MA-6TMOS application resulted in mostly composite, and not joint, failure. After 28 days of conditioning, the flexural strength of the joint repaired with SS-4MA-4TMOS was at 94% of the neat, solid material under the same procedure. However, the strength of the neat composite was observed to decline during the conditioning process by ~30%. The joint behavior was explained on the basis of the gradual hydrolysis effect (the greatest decrease being observed for silane).

Background: Clinically, three-dimensional (3D) printing technology is becoming a popular and efficient dental processing technology. Recently, there has been an increasing demand for dental materials that exhibit bioactive properties. The present study aimed to evaluate the mechanical properties, cytotoxicity, and fluoride ion release capacity of 3D-printed dental resins modified with bioactive glass. Materials and methods: The resin FotoDent splint used in the production of removable orthodontic splints, was modified by the addition of two types of bioactive glasses that are capable of releasing fluoride ions. The novel materials used for the production of dental splints were examined for their mechanical, physical, and biological properties (fracture resistance, sorption, solubility, elution of nonpolymeric substances, and release of fluoride ions over time) and cytotoxic effects on cell cultures. Results: Initially, the fracture toughness of the 3D-printed resin was found to be 55 MPa, but after modification with glass, the resistance was reduced to about 50 MPa. Sorption and solubility values of the materials (19.01 ÷ 21.23 µg/mm3 and 0.42 ÷ 1.12 µg/mm3, respectively) complied with the safety limits imposed by ISO standard. Modified resins were capable of releasing fluoride ions, and the maximum releasing effect was observed after 14 days of incubation. Both the modified resins, after four days of contact with human gingival fibroblasts, exhibited moderate cytotoxic properties. Conclusions: The experimental results showed that modification of methacrylate resin, used in 3D printing technology, with bioactive glasses produces novel dental materials that possess desirable bioactive properties. The findings of this study indicate the potential ability of modified polymethacrylate resins to release fluoride ions in the oral cavity environment. The modified materials are characterized with a moderate decrease in physical properties and mild cytotoxicity on direct contact with human fibroblasts.

Chlorhexidine (CHX)-based dental hygiene products are widely used by dental patients. As these products may have long-term contact with denture poly(methyl methacrylate) (PMMA) resin, anti-discoloration systems (ADSs) were included in them to prevent discoloration of the natural teeth and dental materials. Purpose: The aim of this study was to evaluate the effect of two newly designed CHX-containing gels with ADSs and two commercial products with ADSs (Curasept 0.5% and Curasept 1%) in preventing staining and to analyze the mechanical properties of heat-curing PMMA denture base resin. Materials and methods: Twenty-five discs (five for each test group) of PMMA dental resin with a thickness of 1 mm and a diameter of 20 mm were polymerized according to the manufacturer’s instructions and stored in distillate water at a temperature of 37 °C. The surface of the specimens was covered with two commercially available gels—Curasept 1% and Curasept 0.5%, or two experimental gel formulations containing 1% CHX. PMMA specimens stored in distilled water were used as control. The initial values of color and Brinell hardness of the specimens were measured immediately after specimen preparation. The changes in color and Brinell hardness, as well as water sorption, and solubility of the specimens were measured after one year of conditioning. Statistical analysis of the obtained data was performed using one-way analysis of variance and Dunn–Bonferroni post hoc tests. Results: In the group of specimens covered with gel 1 with citric acid or Curasept 0.5%, the color change was clinically acceptable (ΔE* < 2.7). In the specimens stored in contact with gel 2 with polyvinylpyrrolidone (PVP) and Curasept 1%, the ΔE* values were 3.6 and 3.67, respectively. In the control group, the level of hardness decreased significantly from 150 to 140 during the experiment. In addition, a statistically significant decrease in hardness was observed in specimens stored with Curasept 1% and gel 2 with PVP. Specimens stored in contact with Curasept 0.5% and gel 1 with citric acid also showed a lower hardness, but the change was not statistically significant. The sorption of all the groups of PMMA specimens ranged from 22.83 to 24.47 µg/mm3, with no significant differences found between them. All the PMMA specimens stored in contact with the tested CHX gels exhibited a significantly higher solubility (6.84 ± 7.91 µg/mm3) compared to the control group (6.74 µg/mm3), with the highest solubility noted for specimens stored with Curasept 1%. Conclusions: The results showed that CHX used in the gel form with ADSs at a concentration of 0.5% and the experimental gel containing 1% CHX with citric acid caused limited changes to the color and mechanical properties of the PMMA denture base resin during the study period. These gels may be safely used by dental patients for oral hygiene regimen even for prolonged periods of time. ADSs contained in these gels seem to be effective in preventing CHX discoloration.

Background: Oral hygiene is essential for maintaining residual dentition of partial denture wearers. The dental material should positively affect the oral environment. Fluoride-releasing dental materials help to inhibit microbial colonization and formation of plaque as well as to initiate the remineralization process in the early cavity area. Aim: To evaluate fluoride ion release and recharge capacity, sorption, and solubility of polymethyl methacrylate (PMMA) dental resin modified with bioactive glass addition. Materials and methods: Two bioactive glass materials (5 wt% Kavitan, 10 wt% Kavitan, and 10 wt% Fritex) and pure 10 wt% NaF were added to dental acrylic resin. After polymerization of the modified resins, the release levels of fluoride anions were measured based on color complex formation by using a spectrophotometer after 7, 14, 28, and 35 days of storage in distilled water at 37 °C. Subsequently, specimens were brushed with a fluoride-containing tooth paste on each side for 30 s, and the fluoride recharge and release potential was investigated after 1, 7, and 14 days. Sorption and solubility after 7 days of storage in distilled water was also investigated. Results: The acrylic resins with addition of 10% bioactive glass materials released fluoride ions for over 4 weeks (from 0.14 to 2.27 µg/cm2). The amount of fluoride ions released from the PMMA resin with addition of 10 wt% Fritex glass was higher than that from the resin with addition of 10 wt% Kavitan. The acrylic resin containing 10 wt% NaF released a high amount of ions over a period of 1 week (1.58 µg/cm2), but the amount of released ions decreased rapidly after 14 days of storage. For specimens containing 5 wt% Kavitan glass, the ion-releasing capacity also lasted only for 14 days. Fluoride ion rechargeable properties were observed for the PMMA resin modified with addition of 10 wt% Fritex glass. The ion release levels after recharge ranged from 0.32 to 0.48 µg/cm2. Sorption values ranged from 10.23 μm/mm3 for unmodified PMMA resin to 12.11 μm/mm3 for specimens modified with 10 wt% Kavitan glass. No significant differences were found regarding solubility levels after 7 days. Conclusions: The addition of 10 wt% Fritex and 10 wt% Kavitan bioactive glass materials to heat-cured acrylic resin may improve its material properties, with bioactive fluoride ion release ability lasting for over 4 weeks. The resin modified with 10 wt% Fritex glass could absorb fluoride ions from the toothpaste solution and then effectively release them. Addition of fluoride releasing fillers have a small effect on sorption and solubility increase of the modified PMMA resin. Clinical significance: The addition of bioactive glass may be promising in the development of the novel bioactive heat-cured denture base resin.

This article discusses the definitions and typology of theater documentation. The author comments on the existing distinction between: 1) documentation of theater performances, which, according to his 1970 concept, is divided into process records (giving insights into performance preparation) and product records (enabling the reconstruction of a performance); 2) documentation of theater life, comprising variously arranged inventories of performances, referred to as repertories (e.g., of a given historical period, city, theater or ensemble, artist, etc.). He proposes a new distinction: between passive documentation (comprising various library, archive, and museum collections) and active documentation (comprising all types of elaboration). He also distinguishes between current and historical documentation. He analyzes the relationship between documentation and interpretation, emphasizing that while active documentation always involves a degree of interpretation, it remains credible provided that it is characterized by interpretive restraint, so that different, even contradictory interpretations of the material are possible. The article discusses institutions in charge of current and historical theater documentation (the Institute of Art of the Polish Academy of Sciences) and collecting historical documentation (Warsaw theater museum). The author also indicates the most important direction for this strand of theater research: the urgent need to undertake documentary research on pre-photographic and photographic iconography of actors.

This article discusses the development of research into the presence of commedia dell’arte in Poland and its influence on Polish theater. The author polemically engages with the work of scholars of the Polish Enlightenment. He argues that research on the origins of professional theater in Poland has neglected the traditions of the Saxon period (1697–1763), notably those connected with commedia dell’arte. He emphasizes the importance of performances by masters of this genre, such as Angelo Constantini or Cesare D’Arbes, in the first half of the 18th century, as an important part of the history of theater in Poland and its links with the history of European theater. In this context, he draws attention to the valuable contributions by Mieczysław Brahmer, Bohdan Korzeniewski, and Barbara Król, who researched this topic. He also proposes to include iconographic material as a research source, especially the famous porcelain figurines from the Meissen workshop of Johann Joachim Kändler (1706–1775), which depict 18th-century Italian comedians. The author counters Sacheverell Sitwell’s claim that these figures were modelled on Dresden fair theater actors. He stresses that one ought to be very cautious in ascribing documentary value to the Meissen figures, as they were already proven to have been largely modelled on François Joullaine’s engravings illustrating Luigi Riccoboni’s Histoire du theatre italien. However, he posits that some of them were modelled on the famous roles of Italian comedy masters who performed at the House of Wettin courts in Dresden and Warsaw.