Search

Abstract To investigate the impact on the ovarian reserve after minimally invasive ovarian cystectomy using two platforms, the Da Vinci robotic system (Xi and SP) and the laparoscopic system. Patients underwent laparoscopic or Da Vinci robotic (Xi or SP) ovarian cystectomy for benign ovarian cysts between January 1, 2018, and December 31, 2022 at Guro Hospital, Korea University Medical center. We measured the change of AMH values (%) = [(postAMH − preAMH)] × 100/preAMH. No significant differences in preoperative age, cyst size, estimated blood loss during surgery, hemoglobin drop, length of hospital stay, adhesion detachment rate and cyst rupture rate were observed. However, the operative time was significantly shorter in the laparoscopic group than that in the robotic group (67.78 ± 30.58 min vs. 105.17 ± 38.87 min, p < 0.001) The mean preAMH and postAMH were significantly higher with the Da Vinci robotic group than with the laparoscopic group (preAMH: 5.89 ± 4.81 ng/mL vs. 4.01 ± 3.59 ng/mL, p = 0.02, postAMH: 4.36 ± 3.31 ng/mL vs. 3.08 ± 2.60 ng/mL, p = 0.02). However, the mean ΔAMH was not significantly different between two groups. ΔAMH also did not demonstrate significant differences among the three groups; laparoscopic, Xi and SP robotic. Even in the patient groups with preAMH < 2 and diagnosed with endometriosis, the ΔAMH did not show significant differences between the laparoscopic and robotic groups. The Da Vinci robotic system is no inferior to conventional laparoscopic systems in preserving ovarian function.

The utilization of CoFeB thin films in spintronic devices has attracted significant attention due to their exceptional magnetic properties, which include high saturation magnetization and spin polarization. However, the effect of ambient temperature on the magnetic properties of CoFeB/MgO frames, particularly those with different buffer and capping layers, remains unexplored. Therefore, in this study, the magnetostatic and dynamic properties of CoFeB/MgO frames were investigated at various temperatures. Using vibrating sample magnetometry and ferromagnetic resonance spectroscopy, changes in key parameters such as saturation magnetization, the Gilbert damping constant, magnetic anisotropy field, in-plane uniaxial magnetic anisotropy energy, and thermal stability factor were investigated. Furthermore, the thermal stabilities of CoFeB/MgO frames with Ta buffer and capping layers were compared with those of CoFeB/MgO frames with W buffer and capping layers by examining the changes in the key parameters at various temperatures. These results reveal that the thermal stability of the latter surpassed that of the former. This study provides significant insights for the development of thermally robust spintronic devices capable of operating above room temperature.

In this study, the effects of heat and radiation on the degradation behaviour of fluoroelastomer under simulated normal operation and a severe accident environment were investigated using sequential testing of gamma irradiation and thermal degradation. Tensile properties and Shore A hardness were measured, and thermogravimetric analysis was used to evaluate the degradation behaviour of fluoroelastomer. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy were used to characterize the structural changes of the fluoroelastomer. Heat and radiation generated in nuclear power plant break and deform the chemical bonds, and fluoroelastomer exposed to these environments have decreased CH and functional groups that contain oxygen and double bonds such as CO, C=O and C=C were generated. These functional groups were formed by auto oxidation by reacting free radicals generated from the cleaved bond with oxygen in the atmosphere. In this auto oxidation reaction, crosslinks were generated where bonded to each other, and the mobility of molecules was decreased, and as a result, the fluoroelastomer was hardened. This hardening behaviour occurred more significantly in the severe accident environment than in the normal operation condition, and it was found that thermal stability decreased with the generation of unstable structures by crosslinking.

Green logistics (GL) is the main development trend of modern logistics. The analysis of green logistics topics and their evolution is helpful in grasping its development trend and doing research facing the international frontier. Focusing on the hot topics and evolution process of green logistics, this paper analyzes from four aspects: firstly, this study divides the green logistics development progress into three stages based on life cycle theory, which are the emerging stage (1993-2003), slow growth stage (2004-2014) and rapid growth stage (2015-2021). Then, based on latent dirichlet allocation (LDA) topic model, this study summarizes and confirms related words and meaning of each topic in different stages. Furthermore, this study calculates the text similarity in each development stage of green logistics and analyzes the trend of hot topics in green logistics. Finally, this paper visualizes the development roadmap of green logistics and explores the progression among three stages. There are 4, 5, and 7 topics defined respectively in three development stages. The revolution of green logistics is analyzed, and the results show that "model and management on sustainable development of GL", "related issues and potential threats of GL", and "optimization analysis of low-carbon vehicle routing and time" are the primary development trends of green logistics. This study fills the gap in considering the evolution process of green logistics through topic modeling and roadmapping method. It provides a particular theoretical significance for the green and sustainable development of logistics.

Laparoscopic sleeve gastrectomy (LSG) has become a standalone primary procedure as a bariatric metabolic surgery since the early 2000s. The overall complication rate of LSG is reported to range from 2% to 15%. Staple line leakage (SLL) remains a major adverse event and occurs in approximately 1–6% of patients. Choosing the optimal treatment modality is a complex process. Clinicians must understand that nutritional support and drainage of fluid collection are essential for initial management. Conservative endoscopic management and sufficient drainage can resolve approximately 70% of SLLs. Endoscopic management of bariatric complications has been rapidly evolving in recent years and can be considered in all patients who are hemodynamically stable. We will review the available endoscopic management techniques, including stent placement (self-expanding stents and bariatric-specific stents), clipping, tissue sealant application, and internal drainage (double-pigtail stents [DPS] placement, endoscopic vacuum therapy, and septotomy). Stent placement remains the mainstream treatment for SLLs. However, healing with stents requires multiple sessions/stents and a long course of recovery. Endoscopic internal drainage is gaining popularity and has the potential to be a superior method. The importance of early intervention and combined endoscopic methods should be recognized.

BackgroundAlthough the PRISMS study did not demonstrate the benefit of intravenous alteplase administration in patients with mild stroke within 3 h, about 30% of patients presenting with mild symptoms showed unfavorable functional outcomes. We investigated the factors predictive of functional disability at 90 days in patients who were excluded from alteplase administration due to the National Institutes of Health Stroke Scale (NIHSS) scores of 0–5 and a score between 0 and 2 for each NIHSS score item.MethodsAll patients were diagnosed with acute ischemic stroke or transient ischemic attack within 4.5 h of admission to a tertiary hospital and did not receive alteplase due to a minor stroke between January 2013 and December 2020. Radiological data and clinical information were collected, including baseline and discharge NIHSS scores and modified Rankin Scale (mRS) scores at 90 days. Early neurological deterioration (END) was defined as an increase of two or more NIHSS scores. We defined moderate motor weakness as a NIHSS limb motor score of more than 3 and defined a favorable outcome as a mRS score at 90 days that was 0 or 1.ResultsDuring the investigation period, 400 patients did not receive alteplase. END occurred significantly more frequently in patients with large artery disease (LAD) than in those with other TOAST classifications. In the multivariate regression analysis, NIHSS per 1-point increase, presenting as moderate motor weakness, and LAD were independent predictors of poor functional outcome (OR, 1.811 NIHSS per 1-point increase; 95% confidence interval [CI], 1.503–2.182; P < 0.0001; OR, 2.173 moderate motor weakness; 95% CI 1.028–4.595; P = 0.042; OR, 2.033 LAD; 95% CI 1.099–3.762; P = 0.024, respectively).ConclusionModerate motor weakness presentation and LAD may be important factors associated with poor functional outcomes in patients with acute stroke excluded from alteplase administration due to mild symptoms.

Abstract Quantifying the spin–orbit torque (SOT) efficiency with changing the layer thickness is crucial for understanding the physical background of SOT. This study investigates the Nb-thickness-dependent SOT efficiency of two types of layered heterostructures: Ta/Nb/CoFeB and Pt/Nb/CoFeB. We find that the Nb thickness dependence of the SOT efficiency in the two samples is quite different. In the Pt/Nb series, the SOT sign changes according to the thickness variation because Pt and Nb have different spin–orbit coupling signs. We observe the resulting reversal in switching polarity through current-induced SOT switching experiments. However, due to the same spin–orbit coupling signs of Ta and Nb, no such polarity reversal was observed in Ta/Nb series. Further, we extract the spin diffusion length of Nb in each heterostructure. These results provide a systematic understanding of the material- and thickness-dependent SOT characteristics.

Abstract Patient-specific phenotyping of coronary atherosclerosis would facilitate personalized risk assessment and preventive treatment. We explored whether unsupervised cluster analysis can categorize patients with coronary atherosclerosis according to their plaque composition, and determined how these differing plaque composition profiles impact plaque progression. Patients with coronary atherosclerotic plaque (n = 947; median age, 62 years; 59% male) were enrolled from a prospective multi-national registry of consecutive patients who underwent serial coronary computed tomography angiography (median inter-scan duration, 3.3 years). K-means clustering applied to the percent volume of each plaque component and identified 4 clusters of patients with distinct plaque composition. Cluster 1 (n = 52), which comprised mainly fibro-fatty plaque with a significant necrotic core (median, 55.7% and 16.0% of the total plaque volume, respectively), showed the least total plaque volume (PV) progression (+ 23.3 mm3), with necrotic core and fibro-fatty PV regression (− 5.7 mm3 and − 5.6 mm3, respectively). Cluster 2 (n = 219), which contained largely fibro-fatty (39.2%) and fibrous plaque (46.8%), showed fibro-fatty PV regression (− 2.4 mm3). Cluster 3 (n = 376), which comprised mostly fibrous (62.7%) and calcified plaque (23.6%), showed increasingly prominent calcified PV progression (+ 21.4 mm3). Cluster 4 (n = 300), which comprised mostly calcified plaque (58.7%), demonstrated the greatest total PV increase (+ 50.7mm3), predominantly increasing in calcified PV (+ 35.9 mm3). Multivariable analysis showed higher risk for plaque progression in Clusters 3 and 4, and higher risk for adverse cardiac events in Clusters 2, 3, and 4 compared to that in Cluster 1. Unsupervised clustering algorithms may uniquely characterize patient phenotypes with varied atherosclerotic plaque profiles, yielding distinct patterns of progressive disease and outcome.

The mechanism of the interfacial Dzyaloshinskii-Moriya interaction in heavy metal-ferromagnet heterostructures is debated. Here, the authors show the oscillating behaviour of the interaction as a function of the MgO spacer layer thickness, supporting the interlayer exchange coupling mechanism of the Ruderman-Kittel-Kasuya-Yosida type.

Nickel base Alloy X-750, which is used as fastener parts in light-water reactor (LWR), has experienced many failures by environmentally assisted cracking (EAC). In order to improve the reliability of passive components for nuclear power plants (NPP's), it is necessary to study the failure mechanism and to predict crack growth behavior by developing a probabilistic failure model.In this study, The Bayesian inference was employed to reduce the uncertainties contained in EAC modeling parameters that have been established from experiments with Alloy X-750. Corrosion fatigue crack growth rate model (FCGR) was developed by fitting into Paris’ Law of measured data from the several fatigue tests conducted either in constant load or constant ΔK mode.These parameters characterizing the corrosion fatigue crack growth behavior of X-750 were successfully updated to reduce the uncertainty in the model by using the Bayesian inference method. It is demonstrated that probabilistic failure models for passive components can be developed by updating a laboratory model with field-inspection data, when crack growth rates (CGRs) are low and multiple inspections can be made prior to the component failure.

Purpose Alport syndrome (AS) is one of the most common inherited renal diseases caused due to mutations of genes encoding specific proteins of the type IV collagen family, and its major clinical manifestations include progressive renal failure, sensorineural deafness, and ocular abnormalities. We investigated the clinical characteristics and long-term prognosis of AS in Korean pediatric and adult populations. Methods We conducted a retrospective review of medical records of 33 children and adults who had been diagnosed or treated with AS from 1985 to 2019. Results The mean age of the 33 patients diagnosed with AS was 16.2±13.6 years, and the male-to-female ratio was 2:1. At the first visit, recurrent gross hematuria was the most common initial symptom. In 10 of 33 patients (30.3%), sensorineural hearing loss (SNHL) was diagnosed, but none had ophthalmic problems. Moreover, 11 of 33 patients (33.3%) had advanced to end-stage renal disease (ESRD), and a significant difference was observed in the age of the patients who progressed to ESRD based on the presence or absence of SNHL (P=0.035). Conclusion SNHL in AS can be an important prognostic factor for long-term deterioration of renal function. Further investigation is required to confirm the clinical course and the genetic characteristics of AS in Korea through prospective national cohort studies.

Ebstein anomaly is a rare congenital heart malformation typically involving the tricuspid valve and the right ventricle that has a wide range of anatomical and pathophysiological presentations. Various surgical repair techniques for Ebstein anomaly have been report-ed because of its near-infinite anatomical variability. Cone repair for Ebstein anomaly can achieve nearly anatomical reconstruction of the tricuspid valve with promising outcomes. In this article, the surgical techniques for cone repair in adult patients with Ebstein anom-aly are described in detail, and clinical experiences and technically challenging cases are presented.

Objective: Transcatheter aortic valve implantation (TAVI) procedures are increasing rapidly, but the durability of tissue valve and periprocedural complications are not satisfactory. Immune reaction to the galactose-α-1,3 galactose β-1,4-N-acetylglucosamine (α-Gal) and conventional processing protocols of cardiac xenografts lead to calcification. Next-generation TAVI needs to be made with α-Gal–free xenografts by multiple anticalcification therapies to avoid immune rejection and enhance durability, and three-dimensional (3D) printing technology to improve the procedural safety. Methods: Porcine pericardia were decellularized and immunologically modified with α-galactosidase. The pericardia were treated by space filler, crosslinked with glutaraldehyde in organic solvent, and detoxified. The sheep-specific nitinol (nickel–titanium memory alloy) wire backbone was made from a 3D-printed model for ovine aortic root. After it passed the fitting test, we manufactured a self-expandable stented valve with the porcine pericardia mounted on the customized nitinol wire–based stent. After in vitro circulation using customized silicone aortic root, we performed TAVI in 9 sheep and obtained hemodynamic, radiological, immunohistopathological, and biochemical results. Results: The valve functioned well, with excellent stent fitting and good coronary flow under in vitro circulation. Sheep were sequentially scheduled to be humanely killed until 238 days after TAVI. Echocardiography and cardiac catheterization demonstrated good hemodynamic status and function of the aortic valve. The xenografts were well preserved without α-Gal immune reaction or calcification based on the immunological, radiographic, microscopic, and biochemical examinations. Conclusions: We proved preclinical safety and efficacy for next-generation α-Gal–free TAVI with multiple anticalcification therapies and 3D-printing technology. A future clinical study is warranted based on these promising preclinical results.

Nonalcoholic fatty liver disease (NAFLD) and diabetes are common metabolic disorders that are often comorbid conditions. Among many proposed treatments, weight reduction is the only approved option for NAFLD to date. However, it is not easy to maintain weight loss by lifestyle modification alone; pharmacological treatments are helpful in this regard. Although many drugs have been investigated, pioglitazone could be a first-line therapy in patients with NAFLD and diabetes. Many more drugs are currently being developed and investigated, and it is likely that combination strategies will be used for future treatment of NAFLD and diabetes. Attention should be paid to the management of NAFLD and diabetes and efforts should be made to intervene early and individualize treatment of NAFLD in patients with diabetes.

To reduce the prevalence of obesity and provide information on evidence-based obesity treatments, the Education Committee of the Korean Society for the Study of Obesity (KSSO) has developed and launched the first Obesity Educator Training Program (OETP). After the course, we analyzed the results of a survey from 110 participants, comprising medical doctors (n=58), nutrition specialists (n=19), exercise specialists (n=14), and students (n=6). Approximately half of the participants were recruited through the Internet (48%), followed by academic leaflets, such as conference posters (21%); the reasons for participation were to learn about evidence-based treatments for obesity (47%), to receive up-to-date knowledge on obesity treatments (39%), to obtain basic information on obesity (10%), and others (4%). More than half of the participants found the date, lecture time, process, and theme of the OETP favorable. The participants indicated that there should be an in-depth course, sharing of the presented files with attendees, a longer lecture time, and a broader OETP that includes other specialties such as nursing. To improve the OETP, the educational committee of the KSSO must develop an in-depth OETP that will reflect these participant’s feedback.

We report a rare case of barium peritonitis following an upper gastrointestinal (GI) series and its imaging findings in a 74-year-old female. Barium peritonitis is a rare but life-threatening complication of GI contrast investigation. Therefore, clinical awareness of barium peritonitis as a complication of GI tract contrast investigation would help to prevent such a complication and manage the patients properly.

Polycystic ovarian syndrome (PCOS) is a common reproductive endocrine disorder in reproductive-age women. Due to its various pathophysiological properties and clinical heterophenotypes, the mechanism of PCOS pathogenesis is still unclear. Several animal models have been used to study PCOS and allow the exploration of the specific mechanism underlying PCOS. We focused on streptozotocin (STZ) to develop a non-steroidal and non-diabetic PCOS model. We administered multiple STZ injections to female C57BL/6 mice (3–4 weeks old) at different concentrations: STZ-15 (15 mg/kg), STZ-30 (30 mg/kg), and STZ-60 (60 mg/kg) treatments. During the experimental period, we analyzed body weight, blood glucose levels, and estrous cycle pattern. Furthermore, five weeks after STZ administration, we examined hormone levels and the morphology of ovarian tissues. Mice in the STZ-15 group did not show differences in body weights, blood glucose level, insulin level, and insulin tolerance compared to wild-type and control groups whereas those in the STZ-60 group presented a typical diabetes phenotype. In the case of the STZ-30 group, only increased blood glucose level was observed. Total testosterone levels were significantly elevated in STZ-15 and STZ-30 groups. Luteinizing hormone (LH) and estradiol levels were not significantly changed in the STZ-treated groups. The number of ovarian antral follicles and atretic follicles significantly increased in the ovary of mice in the STZ-15 and STZ-30 groups. All STZ-treated groups manifested irregular estrus cycles. However, the patterns of estrous cycles were different between mice treated with different STZ concentrations. We found that PI3K-AKT and IRS-1 signaling in the ovary was enhanced by low doses of STZ treatment. Taken together, our finding indicates that multiple injections of STZ at low doses induce PCOS features in mice without induction of diabetes features.

Background : /Aims: Sporadic non-ampullary duodenal neoplasms are rare and optimal treatment for these lesions remains undefined. Endoscopic resection of duodenal neoplasms is widely used recently and it is an alternative treatment strategy to surgical excision. This study aimed to evaluate the safety and efficacy of endoscopic resection of duodenal neoplasms and to determine its outcomes. Methods : : Patients who underwent endoscopic resection for non-ampullary duodenal neoplasms between January 2005 and December 2014 were analyzed retrospectively. Data including size, morphology, histology, location and endoscopic procedural technique were reviewed. The main outcome measurements were success rate, complication, recurrence and follow-up assessments. Results : : The study included 33 patients with duodenal neoplasms. The mean size of resected lesion was 8.58 mm. The results of histologic examination were as follows: 23 (69.7%) adenomas, 2 (6.1%) adenocarcinoma, 3 (9.1%) Brunner’s gland tumor and 3 (9.1%) neuroendocrine tumor. Tubular adenoma wase the most common type (63.6%) of non-ampullary duodenal neoplasms. Eighteen (54.5%) lesions were found in the second portion of the duodenum, and 10 (30.3%) lesions on bulb and 3 (9.1%) lesions on superior duodenal angle. Of the 33 cases, 32 (97.0%) were managed by endoscopic mucosal resection technique during a single session and one case was managed by endoscopic submucosal dissection (ESD). One episode of perforation occurred after ESD. During a median follow-up period of 5.76 months, recurrence was observed in only one case of in a patient with tubular adenoma. Conclusion : s: Endoscopic resection of duodenal neoplasm is a safe and effective treatment modality that can replace surgical resection in many cases. Careful endoscopic follow-up is essential to manage recurrence or residual lesions. (Korean J Gastroenterol 2016;67:8-15)

The reaction of FeCl3, SeO2, and Pyridine (Py) in the presence of methanol (MeOH) under CO pressure generates a black precipitate, which has been confirmed as ferric di-selenide, FeSe2 through different structure characterization methods. Furthermore, impregnation of 5 wt% of FeSe2 onto γ-Al2O3 exhibits better catalytic performance than FeSe2 due to the highly dispersed and smaller particle sizes ca. 200–300 nm. The reductive carbonylation of nitrobenzene (NB) was investigated over FeSe2/γ-Al2O3 as a heterogeneous catalyst, delivering an excellent yield and high selectivity of methyl-N-phenyl carbamate (MPC). Moreover, a set of reactions was performed with variation in the reaction time, temperature, and pressure to investigate the effects of these factors. In particular, FeSe2/γ-Al2O3 is highly stable and can be recycled for up to five cycles without significant loss in catalytic performance. A mechanistic study was also conducted on this low-cost catalyst system, especially proposing a crucial role of FeSe2 (μ-CO) active species.

Although bariatric surgery is the best treatment modality for morbidly obese patients, a 10–30% rate of weight recidivism has been reported in various specialized centers. We examined changes in energy and macronutrients after bariatric surgery and performed analysis to establish appropriate nutritional guidelines for reaching the target percentage of weight loss after surgery. A total of 189 subjects who underwent bariatric surgery were classified into success and failure groups depending on whether or not they reached 50% loss of excess weight at 12 months after bariatric surgery. Physical examinations and dietary surveys were completed before and 1, 6, and 12 months after surgery. Using receiver operating characteristic (ROC) analysis, the optimal cutoff points for nutrient intakes for determining success after bariatric surgery were computed based on maximal Youden’s index. At 6 and 12 months after surgery, the success group had significantly lower carbohydrate and fat intakes than the failure group. The cutoff calorie intake for success in weight loss was 44.5, >41.5, and >86.5 g/day at 1, 6, and 12 months post operation, respectively. At 12 months, the cutoff ratio for energy obtained from carbohydrates, protein, and fat was 24.5, and

Background: We conducted this experimental study to examine whether human adipose-derived stem cells (ADSCs) are effective in achieving a recovery of damaged renal tubular epithelial cells in an animal model of cisplatin-induced acute kidney injury using rats. Methods: To examine the in vitro effects of ADSCs in improving nephrotoxicity, we treated mouse renal tubular epithelial cells with both ADSCs and cisplatin mouse renal tubular epithelial cells. And we equally divided 30 male white Sprague-Dawley (SD) rats into the three groups: the control group (intraperitoneal injection of a sterile saline), the cisplatin group (intraperitoneal injection of cisplatin) and the ADSC group (intraperitoneal injection of cisplatin and the hADSC via the caudal vein). At five days after the treatment with cisplatin, serum levels of blood urine nitrogen (BUN) and creatinine were measured from each SD rat. We performed histopathologic examinations of tissue samples obtained from the kidney. Results: The degree of the expression of TNF-α and that of Bcl-2 were significantly higher and lower respectively, in cisplatin group (P

Background: Mitral regurgitation is one of the leading causes of cardiovascular morbidity in pediatric patients with Marfan syndrome. The purpose of this study was to contribute to determining the appropriate surgical strategy for these patients. Methods: From January 1992 to May 2013, six patients with Marfan syndrome underwent surgery for mitral regurgitation in infancy or early childhood. Results: The median age at the time of surgery was 47 months (range, 3 to 140 months) and the median follow-up period was 3.6 years (range, 1.3 to 15.5 years). Mitral valve repair was performed in two patients and four patients underwent mitral valve replacement with a mechanical prosthesis. There was one reoperation requiring valve replacement for aggravated mitral regurgitation two months after repair. The four patients who underwent mitral valve replacement did not experience any complications related to the prosthetic valve. One late death occurred due to progressive emphysema and tricuspid regurgitation. Conclusion: Although repair can be an option for some patients, it may not be durable in infantile-onset Marfan syndrome patients who require surgical management during infancy or childhood. Mitral valve replacement is a feasible treatment option for these patients.

To evaluate the predictive value of the progesterone level at the beta-human chorionic gonadotropin (β-hCG) check day for ongoing pregnancy maintenance in in vitro fertilization (IVF) cycles in women with previous unexplained repeated miscarriages.One hundred and forty-eight women, with visible gestational sac after IVF, were recruited in this observational study. All subjects had unexplained recurrent miscarriages in more than two previous IVF cycles. The progesterone level at the β-hCG check day (i.e. 14 days after oocyte retrieval) was assessed. The area under the curve (AUC) of the progesterone level was evaluated to predict the ongoing pregnancy or miscarriage outcomes.The overall ongoing pregnancy rate was 60.8% (90/148). The cut-off value with β-hCG levels higher than 126.5 mIU/mL and with progesterone levels higher than 25.2 ng/mL could be the predictive factors for ongoing pregnancy maintenance (AUC = 0.788 and 0.826; sensitivity = 0.788 and 0.723; specificity = 0.689 and 0.833; P < 0.0001 and P < 0.0001, respectively). The miscarriage rates were 19.5% (15/77) in the women with β-hCG > 126.5 mIU/mL and 13.0% (10/77) in those with > 25.2 ng/mL. In the comparison of the ROC curves between both values, a similar significance was found. The subjects with β-hCG > 126.5 mIU/mL and progesterone > 25.2 ng/mL showed higher ongoing pregnancy rates [98.0% (49/50) vs. 41.8% (41/98)] than those with β-hCG ≤ 126.5 mIU/mL or progesterone ≤ 25.2 ng/mL.The progesterone level at 14 days after oocyte retrieval can be a good predictive marker for ongoing pregnancy maintenance in women with repeated IVF failure with miscarriage, together with the β-hCG level. The combined cut-off value of progesterone > 25.2 ng/mL and β-hCG > 126.5 mIU/mL may suggest a good prognosis.

The weapon system of The Navy is the small quantity producing system on multiple kinds. It is consisted of various equipment and the subordinate parts of those which can repair the damaged part. The operating procedure concerning warship's repair parts managed under these systems is as follows. Firstly, if demand of repair parts occurs from warship which is the operating unit of weapon, then the Fleet(the repair & supply support battalion) is in charge of dealing with these requests. If certain request from warship is beyond the battalion's capability, it is delivered directly to the Logistic Command. In short, the repair and supply support system of repair parts can be described as the multi-level support system. The various theoretical researches on inventory management of Navy's repair parts and simulation study that reflects reality in detail have been carried out simultaneously. However, the majority of existing research has been conducted on aircraft and tank's repairable items, in that, the studies is woefully deficient in the area concerning Navy's inventory management. For that reason, this paper firstly constructs the model of consumable items that is frequently damaged reflecting characteristics of navy's repair parts inventory management using ARENA simulation. After that, this paper is trying to propose methodology to analyze optimal inventory level of each supply unit through OptQuest, the optimization program of ARENA simulation.

The in vitro maturation of oocytes is frequently used as an assisted reproductive technique (ART), and has been successfully established in humans and rodents. To overcome the limitations of ART, novel procedures for the in vitro maturation of early follicles are emerging. During the follicle isolation procedure, the unintended rupture of each follicle leads to a release of extra oocytes. Such oocytes, which are obtained during follicle isolation from marmosets, can be used for early maturation studies. Marmoset (Callithrix jacchus), which is classified as a new-world monkey, is a novel model that has been employed in reproductive biomedical research, as its reproductive physiology is similar to that of humans in several aspects. The ovaries of female marmosets were collected, and the excess oocytes present during follicle isolation were retrieved without pre-gonadotropin induction. Each oocyte was matured in vitro for 48 h in the presence of various concentrations of human chorionic gonadotropin (hCG) and epidermal growth factor (EGF), and the maturity of oocytes and optimal maturation conditions were evaluated. Each oocyte was individually reverse-transcribed, and the expression of mRNAs and microRNAs (miRs) were analyzed. Concentrations of hCG significantly affected the maturation rate of oocytes [the number of metaphase II (MII) oocytes]. The expression of BMP15 and ZP1 was highest when the oocytes were matured using 100 IU/L of hCG without pre-treatment with gonadotropins, and that of Cja-mir-27a was highest when cultured with follicle stimulating hormone. These results suggest that these up-regulated miRs affect the maturation of oocytes. Interactions with other protein networks were analyzed, and a strong association of BMP15 and ZP1 with sperm binding receptor (ACR), anti-Müllerian hormone (AMH), and AMH receptor was demonstrated, which is related to the proliferation of granulosa cells. Collectively, on the basis of these results, the authors propose optimal maturation conditions of excess oocytes of marmoset without in vivo gonadotropin treatment, and demonstrated the roles of miRs in early oocyte maturation at the single-cell level in marmosets.

Graphene quantum dots (GQDs) have received great attention as optical agents because of their low toxicity, stable photoluminescence (PL) in moderate pH solutions, and size-dependent optical properties. Although many synthetic routes have been proposed for producing GQD solutions, the broad size distribution in GQD solutions limits its use as an efficient optical agent. Here, we present a straightforward method for size fractionation of GQDs dispersed in water using a cross-flow filtration system and a track-etched membrane with cylindrical uniform nanopores. The GQD aqueous suspension, which primarily contained blue-emitting GQDs (B-GQDs) and green-emitting GQDs (G-GQDs), was introduced to the membrane in tangential flow and was fractionated with a constant permeate flow of about 800 L m−2 h−1 bar−1. After filtration, we observed a clear blue PL spectrum from the permeate side, which can be attributed to selective permeation of relatively small B-GQDs. The process provided a separation factor (B-GQDs/G-GQDs) of 0.74. In the cross-flow filtration system, size-dependent permeation through cylindrical nanochannels was confirmed by simulation. Our results demonstrate a feasible method facilitating size fractionation of two-dimensional nanostructures using a cross-flow membrane filtration system. Since membrane filtration is simple, cost-effective, and scalable, our approach can be applied to prepare a large amount of size-controlled GQDs required for high performance opto-electronics and bio-imaging applications.

Ethylene glycol (EG) is a sweet-tasting, odorless organic solvent found in many agents, such as anti-freeze. EG is composed of four organic acids: glycoaldehyde, glycolic acid, glyoxylic acid and oxalic acid in vivo. These metabolites are cellular toxins that can cause cardio-pulmonary failure, life-threatening metabolic acidosis, central nervous system depression, and kidney injury. Oxalic acid is the end product of EG, which can precipitate to crystals of calcium oxalate monohydrate in the tubular lumen and has been linked to acute kidney injury. We report a case of EG-induced oxalate nephropathy, with the diagnosis confirmed by kidney biopsy, which showed acute tubular injury of the kidneys with extensive intracellular and intraluminal calcium oxalate monohydrate crystal depositions.

Logistical facility location decisions can make a crucial difference in the success or failure of a company. Geographical Information Systems (GIS) have recently become a very popular decision support system to help deal with facility location problems. However, until recently, GIS methodologies have not been fully embraced as a way to deal with new facility location problems in business logistics. This research makes a framework for categorizing empirical facility location problems based on the intensity of the involvement of GIS methodologies in decision making. This framework was built by analyzing facility location models and GIS methodologies. The research results revealed the depth of the embracement of GIS methodologies in logistics for determining new facility location decisions. In the new facility location decisions, spatial data inputs are almost always coupled with the visualization of the problems and solutions. However, the usage of GIS capability solely (i.e. suitability analysis) for problem solving has not been embraced at the same level. In most cases, the suitability analysis is used together with special optimization models for choosing among the multiple alternatives.

The aim of this study was to investigate the antioxidant properties of the ethanol extract of the flower of Camellia japonica (Camellia extract). Camellia extract exhibited 1,1-diphenyl-2-picrylhydrazyl radical and intracellular reactive oxygen species (ROS) scavenging activity in human HaCaT keratinocytes. In addition, Camellia extract scavenged superoxide anion generated by xanthine/xanthine oxidase and hydroxyl radical generated by the Fenton reaction (FeSO4 + H2O2) in a cell-free system, which was detected by electron spin resonance spectrometry. Furthermore, Camellia extract increased the protein expressions and activity of cellular antioxidant enzymes, such as superoxide dismutase, catalase and glutathione peroxidase. These results suggest that Camellia extract exhibits antioxidant properties by scavenging ROS and enhancing antioxidant enzymes. Camellia extract contained quercetin, quercetin-3-O-glucoside, quercitrin and kaempferol, which are antioxidant compounds.

The expression profile of microRNA (miRNA) in uterine leiomyoma (UL) cells is different from that in normal uterine myometrial (UM) cells. The effect of UL cells on uterine receptivity might vary according to their ability to distort the uterine endometrial cavity. However, the variation in miRNA expression profiles between endometrial cavity-distorting leiomyoma (ECDL) and endometrial cavity non-distorting leiomyoma (ECNDL) cells remains unknown. This study aimed to elucidate whether the expression profile of miRNAs in ECDL cells is dissimilar to that of ECNDL cells in uterus. Pelviscopic myomectomy was performed to obtain tissue samples of UL and their corresponding normal UM tissues (matched) from patients with UL (n = 26), among whom women with ECNDL and ECDL numbered 15 and 11, respectively. The relative expression of hsa-miR-15b, -29a, -29b, -29c, -197, and -200c as well as the candidate target genes in UL cells was compared to those in the matched UM cells using qRT-PCR to assess their ability to cause ECD. The spatial expression of miRNAs and target genes in the UL tissues was analyzed using in situ hybridization. Target gene expression was analyzed using qPCR after transfection with the mimics and inhibitors of miRNAs in UL cells. The relative expression level of miR-15b was upregulated, and the relative expression levels of miR-29a, -29b, -29c, -197, and -200c were downregulated in UL cells compared to those in UM cells. The relative expression levels of progesterone receptor, estrogen receptor, and matrix metalloproteinases (MMPs) were upregulated in UL cells compared to those in UM cells. The relative expression levels of miR-29c and -200c were downregulated, and the relative expression levels of estrogen receptor, MMPs and tissue inhibitors of metalloproteinases (TIMPs) were upregulated in ECDL cells compared to those in ECNDL cells. The expression profile of miRNAs in UL cells varied with respect to the occurrence or absence of endometrial cavity distortion. The biochemical properties of UL might be regulated by miRNAs in order to alter their effect on structural homeostasis of the uterus.

The electronics industry is a key industry in South Korea. To improve efficiency and maintain a competitive edge in fast-paced technological age it is critical to synchronize production supply with market demand. This paper focuses on the strategies which make the “just in time” production system within the electronic supply chain. The presented case study of Samsung Electronics Thin Film Transistor-Liquid Crystal Display (TFT-LCD) Inbound Logistics provides a solid example of process integration in the areas of: packaging, transportation and information sharing. The problems faced by Samsung Electronics in the early 2000’s were a direct result of an imbalance between increased traffic/demand and existing production capacity. The most detrimental of these problems caused delays in supply, shortage of space in the hub center and the bottlenecking of supply transportation. This paper demonstrates how Samsung Electronics reexamined and systematically streamlined their existing processes and how they successfully integrated “lean thinking” strategies to all areas of TFT-LCD production. As a result of the integration of these strategies, Samsung Electronics began using a line-to-line packing system which focused on packing items in a group using a standardized, returnable packing system. Additionally, they opted to replace their paper invoice system for an improved transportation system through which a data could reflect flows of information and materials in real time. The integration of these strategies gave Samsung Electronics a new approach to TFT-LCD Inbound Logistics which allowed them to overcome their dilemmas and resulted in successful outcomes, decreased lead times, higher quality products and an reduction in total costs.

The studies focusing on inbound logistics in the automobile industry have been limited because of the relatively small portion of logistics cost. But now it is recognized as one of the critical factors for efficient execution of supply chain management (SCM). The survey of suppliers in the automobile industry conducted in this study indicated significant relationships among logistics performance, logistics outsourcing, and performance evaluation level. This research is three-fold. First, current status of part supplier's logistics was analyzed by interviews with inbound logistics providers and suppliers. Second, management type of logistics was analyzed. There were three kinds of logistics -two kinds of logistics outsourcing and direct control by the supplier. Each type of logistics management showed differences about performance. Third, logistics performance evaluation and its relation with the actual logistics performance were presented. Comparable performance evaluation factors were selected, and it is shown that they had a correlation with actual performance.

Sintering of light aluminium alloys powder has been investigated as a way to substitute steels in automotive and aerospace industries. Premix Al-5.5Zn-2.5Mg-0.5Cu composite powder called Alumix 431D was analyzed in this research. Sintering was carried out under ultra high purity nitrogen gas and before reaching sintering temperature, green samples were delubricated at 400°C for 30 min. The powder possesses high sinterability by reaching 96% relative density at 580°C sintering temperature. Formation of liquid phase seems to support achieving high sintering density. Optimum mechanical properties also were obtained under those conditions. T6 heat treatment was done to improve the mechanical properties by formation of precipitation strengthening, and MgZn2 appears to be dominant strengthening precipitate. X-ray diffraction, optical microscopy, and SEM-EDS were used to characterize powder, and sintered and heat treated samples.

This paper analyzes the logistics patterns of Korea to elaborate the strategies of Korean Free Economic Zones (FEZs) in relation to Northeast Asian logistics hubs. As the surface transportation of Korea, China and Japan, is cut off by geographical factors and by political border lines, this paper confines the analysis scope to air and maritime transportation. From the analysis of air and maritime transportation in Northeast Asian region, this paper tries to understand the cargo flow from and to Korean airports and ports by region and by commodity types, and thereby, to identify the main counterpart regions of trade by commodity types and by modes. The policy implications for the development strategy of Korean FEZs (Incheon, Busan, and Gwangyang) are described from those analyses.