Search

In vitro follicle growth is a promising technology to preserve fertility for cancer patients. We previously developed a three-dimensional (3-D) ovarian tissue culture system supported by mouse tumor cell-derived Matrigel. When murine ovarian tissues at 14 days old were cultured in Matrigel drops, antrum formation and oocyte competence were significantly enhanced compared with those cultured without Matrigel. In this study, we tested whether nonanimal-derived dextran hydrogels can support a 3-D ovarian tissue culture. We employed chemically defined dextran hydrogels consisting of dextran polymers crosslinked with polyethylene glycol (PEG)-based cell-degradable crosslinker. To determine the optimal gel elasticity for the 3-D tissue culture, we measured Young's modulus of dextran hydrogels at four concentrations (1.75, 2.25, 2.75, and 3.25 mmol/L), and cultured ovarian tissues in these gels for 7 days. As a result, 2.25 mmol/L dextran hydrogel with Young's modulus of 224 Pa was appropriate to provide physical support as well as to promote follicle expansion in the 3-D system. To mimic the natural extracellular matrix (ECM) environment, we modified the dextran hydrogels with two bioactive factors: ECM-derived Arg-Gly-Asp (RGD) peptides as a cell-adhesive factor, and activin A. The ovarian tissues were cultured in 2.25 mmol/L dextran hydrogels under four different conditions: Activin-/RGD- (A-R-), A + R-, A-R+, and A + R+. On Day 7 of culture, follicle and oocyte sizes were significantly increased in the RGD-modified conditions compared with those without RGD. The RGD-modified hydrogels also promoted mRNA levels of steroidogenic-related genes and estradiol production in the 3-D ovarian tissue culture. In vitro maturation and developmental competence of follicular oocytes were remarkably improved in the presence of RGD. In particular, blastocyst embryos were obtained only from A-R+ or A+R+ conditions after in vitro fertilization. We also determined synergistic effects of the RGD peptides and activin A on follicle growth and oocyte development in the 3-D tissue culture. In conclusion, our results suggest that RGD-modified dextran hydrogels provide an ECM-mimetic bioactive environment to support folliculogenesis in a 3-D ovarian tissue culture system.

Tear film lipid layer (TFLL) is the outmost layer of the tear film. It plays a crucial role in stabilizing the tear film by reducing surface tension and retarding evaporation of the aqueous layer. Dysfunction of the TFLL leads to dysfunctional tear syndrome, with dry eye disease (DED) being the most prevalent eye disease, affecting 10%–30% of the world population. To date, except for treatments alleviating dry eye symptoms, effective therapeutic interventions in treating DED are still lacking. Therefore, there is an urgent need to understand the biophysical properties of the TFLL with the long-term goal to develop translational solutions in effectively managing DED. Here, we studied the composition-function correlations of an artificial TFLL, under physiologically relevant conditions, using a novel experimental methodology called constrained drop surfactometry. This artificial TFLL was composed of 40% behenyl oleate and 40% cholesteryl oleate, representing the most abundant wax ester and cholesteryl ester in the natural TFLL, respectively, and 15% phosphatidylcholine and 5% palmitic-acid-9-hydroxy-stearic-acid (PAHSA), which represent the two predominant polar lipid classes in the natural TFLL. Our study suggests that the major biophysical function of phospholipids in the TFLL is to reduce the surface tension, whereas the primary function of PAHSA is to optimize the rheological properties of the TFLL. These findings have novel implications in better understanding the physiological and biophysical functions of the TFLL and may offer new translational insight to the treatment of DED.

Almost all Langmuir-Blodgett (LB) films were prepared with the classical Langmuir film balance, developed more than a century ago. To date, the success of the classical Langmuir film balance and the LB transfer technique is primarily restricted to the study of self-assembled monolayers at the air-water surface. It is challenging to study self-assembled monolayers at the oil-water interface, since the Langmuir film balance requires stacked oil and water layers. We hypothesize that a newly developed experimental method, called constrained drop surfactometry (CDS), is capable of preparing and characterizing LB films from the oil-water interface.We have developed a novel droplet-based LB transfer technique capable of preparing LB films from the oil-water interface. In conjunction with atomic force microscopy, we have demonstrated the capacity of the CDS in studying a natural pulmonary surfactant film self-assembled at the perfluorocarbon-water interface, and have compared to the LB films prepared from the air-water surface using the classical Langmuir film balance.Our findings have demonstrated a novel paradigm for studying self-assembled monolayers and for preparing LB films from the oil-water interface. The CDS holds great promise for expanding the applicability of the traditional LB transfer technique from the air-water surface to the oil-water interface.

Graphical abstract, Highlights • We describe how inhaled substances can inhibit lung surfactant function. • The inhibition of lung surfactant function leads to alveolar collapse. • We present the weight of evidence that supports the adverse outcome pathway. • We give an overview of the methods available to measure each key event of the pathway., Inhaled substances, such as consumer products, chemicals at the workplace, and nanoparticles, can affect the lung function in several ways. In this paper, we explore the adverse outcome pathway (AOP) that starts when inhaled substances that reach the alveoli inhibit the function of the lung surfactant, and leads to decreased lung function. Lung surfactant covers the inner surface of the alveoli, and regulates the surface tension at the air–liquid interface during breathing. The inhibition of the lung surfactant function leads to alveolar collapse because of the resulting high surface tension at the end of expiration. The collapsed alveoli can be re-opened by inspiration, but this re-opening causes shear stress on cells covering the alveoli. This can damage the alveolar-capillary membrane integrity, allowing blood components to enter the alveolar airspace. Blood components, such as albumin, can interact with the lung surfactant and further inhibit its function. The collapse of the alveoli is responsible for a decrease in the surface area available for blood oxygenation, and it reduces the volume of air that can be inhaled and exhaled. These different key events lead to decreased lung function, characterized by clinical signs of respiratory toxicity and reduced blood oxygenation. Here we present the weight of evidence that supports the AOP, and we give an overview of the methods available in vitro and in vivo to measure each key event of the pathway, and how this AOP can potentially be used in screening for inhalation toxicity.

With an increasing prevalence of electronic cigarette (e-cigarette) use, especially among youth, there is an urgent need to better understand the biological risks and pathophysiology of health conditions related to e-cigarettes. A majority of e-cigarette aerosols are in the submicron size and would deposit in the alveolar region of the lung, where they must first interact with the endogenous pulmonary surfactant. To date, little is known whether e-cigarette aerosols have an adverse impact on the pulmonary surfactant. We have systematically studied the effect of individual e-cigarette ingredients on an animal-derived clinical surfactant preparation, bovine lipid extract surfactant, using a combination of biophysical and analytical techniques, including in vitro biophysical simulations using constrained drop surfactometry, molecular imaging with atomic force microscopy, chemical assays using carbon nuclear magnetic resonance and circular dichroism, and in silico molecular dynamics simulations. All data collectively suggest that flavorings used in e-cigarettes, especially menthol, play a predominant role in inhibiting the biophysical function of the surfactant. The mechanism of biophysical inhibition appears to involve menthol interactions with both phospholipids and hydrophobic proteins of the natural surfactant. These results provide novel insights into the understanding of the health impact of e-cigarettes and may contribute to better regulation of e-cigarette products.

The suspension stability of aluminum-based adjuvant (Alum) plays an important role in determining the Alum-antigen interaction and vaccine efficacy. Inclusion of excipients has been shown to stabilize antigens in vaccine formulations. However, there is no mechanistic study to tune the characteristics of Alum for improved suspension stability. Herein, a library of self-assembled rice-shaped aluminum oxyhydroxide nanoadjuvants i.e., nanorices (NRs), was synthesized through intrinsically controlled crystallization and atomic coupling-mediated aggregations. The NRs exhibited superior suspension stability in both water and a saline buffer. After adsorbing hepatitis B surface antigen (HBsAg) virus-like particles (VLPs), human papillomavirus virus (HPV) VLPs, or bovine serum albumin, NR-antigen complexes exhibited less sedimentation. Further mechanistic study demonstrated that the improved suspension stability was due to intraparticle aggregations that led to the reduction of the surface free energy. By using HBsAg in a murine vaccination model, NRs with higher aspect ratios elicited more potent humoral immune responses. Our study demonstrated that engineered control of particle aggregation provides a novel material design strategy to improve suspension stability for a diversity of biomedical applications.

The dramatic impact of COVID-19 on humans worldwide has initiated an extraordinary search for effective treatment approaches. One of these is the administration of exogenous surfactant, which is being tested in ongoing clinical trials.Exogenous surfactant is a life-saving treatment for premature infants with neonatal respiratory distress syndrome. This treatment has also been tested for acute respiratory distress syndrome (ARDS) with limited success possibly due to the complexity of that syndrome. The 60-year history of successes and failures associated with surfactant therapy distinguishes it from many other treatments currently being tested for COVID-19 and provides the opportunity to discuss the factors that may influence the success of this therapy.Clinical data provide a strong rationale for using exogenous surfactant in COVID-19 patients. Success of this therapy may be influenced by the mechanical ventilation strategy, the timing of treatment, the doses delivered, the method of delivery and the preparations utilized. In addition, future development of enhanced preparations may improve this treatment approach. Overall, results from ongoing trials may not only provide data to indicate if this therapy is effective for COVID-19 patients, but also lead to further scientific understanding and improved treatment strategies.

Introduction E-cigarette (EC) and vaping use continue to remain popular amongst teenage and young adult populations, despite several reports of vaping associated lung injury. One of the first compounds that EC aerosols comes into contact within the lungs during a deep inhalation is pulmonary surfactant. Impairment of surfactant’s critical surface tension reducing activity can contribute to lung dysfunction. Currently, information on how EC aerosols impacts pulmonary surfactant remains limited. We hypothesized that exposure to EC aerosol impairs the surface tension reducing ability of surfactant. Methods Bovine Lipid Extract Surfactant (BLES) was used as a model surfactant in a direct exposure syringe system. BLES (2ml) was placed in a syringe (30ml) attached to an EC. The generated aerosol was drawn into the syringe and then expelled, repeated 30 times. Biophysical analysis after exposure was completed using a constrained drop surfactometer (CDS). Results Minimum surface tensions increased significantly after exposure to the EC aerosol across 20 compression/expansion cycles. Mixing of non-aerosolized e-liquid did not result in significant changes. Variation in device used, addition of nicotine, or temperature of the aerosol had no additional effect. Two e-liquid flavours, menthol and red wedding, had further detrimental effects, resulting in significantly higher surface tension than the vehicle exposed BLES. Menthol exposed BLES has the highest minimum surface tensions across all 20 compression/expansion cycles. Alteration of surfactant properties through interaction with the produced aerosol was observed with a basic e-liquid vehicle, however additional compounds produced by added flavourings appeared to be able to increase inhibition. Conclusion EC aerosols alter surfactant function through increases in minimum surface tension. This impairment may contribute to lung dysfunction and susceptibility to further injury.

Fatty acid esters of hydroxy fatty acids (FAHFAs) are a newly discovered class of endogenous lipids that consist of two acyl chains connected through a single ester bond. Being a unique species of FAHFAs, (O-acyl)-ω-hydroxy fatty acids (OAHFAs) differ from other FAHFAs in that their hydroxy fatty acid backbones are ultralong and their hydroxy esterification is believed to be solely at the terminal (ω-) position. Only in recent years with technological advances in lipidomics have OAHFAs been identified as an important component of the tear film lipid layer (TFLL). It was found that OAHFAs account for approximately 4 mol% of the total lipids and 20 mol% of the polar lipids in the TFLL. However, their biophysical function and contribution to the TFLL is still poorly understood. Here we studied the molecular biophysical mechanisms of OAHFAs using palmitic-acid-9-hydroxy-stearic-acid (PAHSA) as a model. PAHSA and OAHFAs share key structural similarities that could result in comparable biophysical properties and molecular mechanisms. With combined biophysical experiments, atomic force microscopy observations, and all-atom molecular dynamics simulations, we found that the biophysical properties of a dynamic PAHSA monolayer under physiologically relevant conditions depend on a balance between kinetics and thermal relaxation. PAHSA molecules at the air-water surface demonstrate unique polymorphic behaviors, which can be explained by configurational transitions of the molecules under various lateral pressures. These findings could have novel implications in understanding biophysical functions that FAHFAs, in general, or OAHFAs, specifically, play in the TFLL.

Phospholipids are ubiquitous components of biomembranes and common biomaterials used in many bioengineering applications. Understanding adsorption of phospholipids at the air-water surface plays an important role in the study of pulmonary surfactants and cell membranes. To date, however, the biophysical mechanisms of phospholipid adsorption are still unknown. It is challenging to reveal the molecular structure of adsorbed phospholipid films. Using combined experiments with constrained drop surfactometry and molecular dynamics simulations, here, we studied the biophysical mechanisms of dipalmitoylphosphatidylcholine (DPPC) adsorption at the air-water surface. It was found that the DPPC film adsorbed from vesicles showed distinct equilibrium surface tensions from the DPPC monolayer spread via organic solvents. Our simulations revealed that only the outer leaflet of the DPPC vesicle is capable of unzipping and spreading at the air-water surface, whereas the inner leaflet remains intact and forms an inverted micelle to the interfacial monolayer. This inverted micelle increases the local curvature of the monolayer, thus leading to a loosely packed monolayer at the air-water surface and hence a higher equilibrium surface tension. These findings provide novel insights, to our knowledge, into the mechanism of the phospholipid and pulmonary surfactant adsorption and may help understand the structure-function correlation in biomembranes.

Although the process by which the cortical tissues of the brain fold has been the subject of considerable study and debate over the past few decades, a single mechanistic description of the phenomenon has yet to be fully accepted. Rather, two competing explanations of cortical folding have arisen in recent years; known as the axonal tension and the differential tangential expansion models. In the present review, these two models are introduced by analyzing the computational, theoretical, materials-based, and cell studies which have yielded them. Then Four-dimensional bioprinting is presented as a powerful technology which can not only be used to test both models of cortical folding de novo, but can also be used to explore the reciprocal effects that folding associated mechanical stresses may have on neural development. Therein, the fabrication of “smart” tissue models which can accurately simulate the in vivo folding process and recapitulate physiologically relevant stresses are introduced. We also provide a general description of both cortical neurobiology as well as the cellular basis of cortical folding. Our discussion also entails an overview of both 3D and 4D bioprinting technologies, as well as a brief commentary on recent advancements in printed central nervous system tissue engineering.

Understanding rheological properties of surfactant and protein films plays a crucial role in a variety of industrial and research areas, such as food processing, cosmetics, and pharmacology. To determine the surface dilational modulus using drop shape analysis, one needs to measure the dynamic surface tension in response to a sinusoidal oscillation of the surface area of the droplet. Despite many applications of drop shape analysis in studying interfacial rheology, oscillation of the droplet surface area is usually controlled in an indirect manner. Existing methods are only capable of controlling volume oscillations of the droplet rather than its surface area. We have developed an arbitrary waveform generator (AWG) to directly oscillate the surface area of a millimeter-sized droplet in a predefined sinusoidal waveform. Here, we demonstrated the capacity of this AWG, in conjunction with constrained drop surfactometry (CDS), in studying the surface dilational rheology of adsorbed surfactant and protein films. It is found that the surface dilational modulus determined for a dilute surfactant (C12DMPO) and two protein solutions (bovine serum albumin and β-casein) revealed their adsorption mechanisms. Our methods hold promise in studying the interfacial rheology of various thin-film materials, biomembranes, foams, and emulsions.

Pulmonary surfactant (PS) is a lipid-protein complex that adsorbs to the air-water surface of the lung as a thin film. Previous studies have suggested that the adsorbed PS film is composed of an interfacial monolayer, plus a functionally attached vesicular complex, called the surface-associated surfactant reservoir. However, direct visualization of the lateral structure and morphology of adsorbed PS films using atomic force microscopy (AFM) has been proven to be technically challenging. To date, all AFM studies of the PS film have relied on the model of Langmuir monolayers. Here, we showed the first, to our knowledge, AFM imaging of adsorbed PS films under physiologically relevant conditions using a novel, to our knowledge, experimental methodology called constrained drop surfactometry. In conjunction with a series of methodological innovations, including subphase replacement, in situ Langmuir-Blodgett transfer, and real-time surface tension control using closed-loop axisymmetric drop shape analysis, constrained drop surfactometry allowed the study of lateral structure and topography of animal-derived natural PS films at physiologically relevant low surface tensions. Our data suggested that a nucleation-growth model is responsible for the adsorption-induced squeeze-out of the PS film, which likely results in an interfacial monolayer enriched in dipalmitoylphosphatidylcholine with the attached multilayered surface-associated surfactant reservoir. These findings were further supported by frequency-dependent measurements of surface dilational rheology. Our study provides novel, to our knowledge, biophysical insights into the understanding of the mechanisms by which the PS film attains low surface tensions and stabilizes the alveolar surface.

In this study, we perform an experimental investigation on the dynamical behaviors of a liquid bridge formed during droplet coalescence. Notably, the two droplets are constrained respectively by two vertically aligned needles. Of particular interest is the pinch-off of the liquid bridge under this constrained condition. We observe three typical behaviors of the liquid bridge: (1) reaching a stable shape after damped oscillations (regime I); (2) pinching off at both sides in the first necking stage with the largest oscillation amplitude (regime II); and (3) pinching off at only the upper side after once or twice necking (regime III). To indicate the condition when the pinch-off of the liquid bridge may occur, we develop a phase diagram based on the radius ratio of the droplet to the needle R d / R n and the Bond number Bo, which respectively characterizes the relative importance of surface tension to the constraint force from needles and that of gravity to surface tension. In general, the dynamical behavior of the liquid bridge transitions from regime II to regime I with R d / R n decreasing, and the critical value for this transition is 1.6. This transition indicates that the constraint force keeps the liquid bridge stable while the surface tension promotes its instability. Surprisingly, once the Bond number is sufficiently high (e.g., Bo > 0.05), regime III (i.e., pinch-off at only the upper side) is observed when R d / R n becomes around the regime II to I transition (i.e., R d / R n = 1.6). It is because the effect of gravity becomes predominant over the surface tension and the constrained force from needles. Moreover, we analyze the pinch-off characteristics of the liquid bridge lying in regimes II and III, including its pinch-off time (i.e., the time interval from the formation and pinch-off of the liquid bridge) and its neck shape at the instant of pinching off.

The growing risk of human exposure to airborne nanoparticles (NPs) causes a general concern on the biosafety of nanotechnology. Inhaled NPs can deposit in the deep lung at which they interact with the pulmonary surfactant (PS). Despite the increasing study of nano-bio interactions, detailed molecular mechanisms by which inhaled NPs interact with the natural PS system remain unclear. Using coarse-grained molecular dynamics simulation, we studied the interaction between NPs and the PS system in the alveolar fluid. It was found that regardless of different physicochemical properties, upon contacting the PS, both silver and polystyrene NPs are immediately coated with a biomolecular corona that consists of both lipids and proteins. Structure and molecular conformation of the PS corona depend on the hydrophobicity of the pristine NPs. Quantitative analysis revealed that lipid composition of the corona formed on different NPs is relatively conserved and is similar to that of the bulk phase PS. However, relative abundance of the surfactant-associated proteins, SP-A, SP-B, and SP-C, is notably affected by the hydrophobicity of the NP. The PS corona provides the NPs with a physicochemical barrier against the environment, equalizes the hydrophobicity of the pristine NPs, and may enhance biorecognition of the NPs. These modifications in physicochemical properties may play a crucial role in affecting the biological identity of the NPs and hence alter their subsequent interactions with cells and other biological entities. Our results suggest that all studies of inhalation nanotoxicology or NP-based pulmonary drug delivery should consider the influence of the PS corona.

Surfactant protein B (SP-B) is essential for life and plays critical roles in host defense and lowering alveolar surface tension. A single-nucleotide polymorphism (SNP rs1130866) of human SP-B (hSP-B) alters the N-linked glycosylation, thus presumably affecting SP-B function. This study has investigated the regulatory roles of hSP-B genetic variants on lung injury in pneumonia-induced sepsis.Wild-type (WT) FVB/NJ and humanized transgenic SP-B-T and SP-B-C mice (expressing either hSP-B C or T allele without mouse SP-B gene) were infected intratracheally with 50 μL (4 × 10 colony-forming units [CFUs]/mouse) Pseudomonas aeruginosa Xen5 or saline, and then killed 24 or 48 h after infection. Bacterial dynamic growths were monitored from 0 to 48 h postinfection by in vivo imaging. Histopathological, cellular, and molecular changes of lung tissues and bronchoalveolar lavage fluid (BALF) were analyzed. Surface tension of surfactants was determined with constrained drop surfactometry.SP-B-C mice showed higher bioluminescence and CFUs, increased inflammation and mortality, the higher score of lung injury, and reduced numbers of lamellar bodies in type II cells compared with SP-B-T or WT (P 0.05). Minimum surface tension increased dramatically in infected mice (P 0.01) with the order of SP-B-CSP-B-TWT. Levels of multiple cytokines in the lung of infected SP-B-C were higher than those of SP-B-T and WT (P 0.01). Furthermore, compared with SP-B-T or WT, SP-B-C exhibited lower SP-B, higher NF-κB and NLRP3 inflammasome activation, and higher activated caspase-3.hSP-B variants differentially regulate susceptibility through modulating the surface activity of surfactant, cell death, and inflammatory signaling in sepsis.

The surface tension of xylem sap has been traditionally assumed to be close to that of the pure water because decreasing surface tension is thought to increase vulnerability to air seeding and embolism. However, xylem sap contains insoluble lipid-based surfactants, which also coat vessel and pit membrane surfaces, where gas bubbles can enter xylem under negative pressure in the process known as air seeding. Because of the insolubility of amphiphilic lipids, the surface tension influencing air seeding in pit pores is not the equilibrium surface tension of extracted bulk sap but the local surface tension at gas–liquid interfaces, which depends dynamically on the local concentration of lipids per surface area. To estimate the dynamic surface tension in lipid layers that line surfaces in the xylem apoplast, we studied the time-dependent and surface area-regulated surface tensions of apoplastic lipids extracted from xylem sap of four woody angiosperm plants using constrained drop surfactometry. Xylem lipids were found to demonstrate potent surface activity, with surface tensions reaching an equilibrium at ~25 mN m-1 and varying between a minimum of 19 mN m-1 and a maximum of 68 mN m-1 when changing the surface area between 50 and 160% around the equilibrium surface area. It is concluded that xylem lipid films in natural conditions most likely range from nonequilibrium metastable conditions of a supersaturated compression state to an undersaturated expansion state, depending on the local surface areas of gas–liquid interfaces. Together with findings that maximum pore constrictions in angiosperm pit membranes are much smaller than previously assumed, low dynamic surface tension in xylem turns out to be entirely compatible with the cohesion–tension and air-seeding theories, as well as with the existence of lipid-coated nanobubbles in xylem sap, and with the range of vulnerabilities to embolism observed in plants.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the virus responsible for the novel coronavirus disease 2019 (COVID-19), has caused a global pandemic on a scale not seen for over a century. Increasing evidence suggests that respiratory droplets and aerosols are likely the most common route of transmission for SARS-CoV-2. Since the virus can be spread by presymptomatic and asymptomatic individuals, universal face masking has been recommended as a straightforward and low-cost strategy to mitigate virus transmission. Numerous governments and public health agencies around the world have advocated for or mandated the wearing of masks in public settings, especially in situations where social distancing is not possible. However, the efficacy of wearing a mask remains controversial. This interdisciplinary review summarizes the current, state-of-the-art understanding of mask usage against COVID-19. It covers three main aspects of mask usage amid the pandemic: quality standards for various face masks and their fundamental filtration mechanisms, empirical methods for quantitatively determining mask integrity and particle filtration efficiency, and decontamination methods that allow for the reuse of traditionally disposable N95 and surgical masks. The focus is given to the fundamental physicochemical and engineering sciences behind each aspect covered in this review, providing novel insights into the current understanding of mask usage to curb COVID-19 spread., Graphic abstractUnlabelled Image

The acute respiratory distress syndrome (ARDS) is characterized by arterial hypoxemia accompanied by severe inflammation and alterations to the pulmonary surfactant system. Published data has demonstrated a protective effect of matrix metalloproteinase-3 (Mmp3) deficiency against the inflammatory response associated with ARDS; however, the effect of Mmp3 on physiologic parameters and alterations to surfactant have not been previously studied. It was hypothesized that Mmp3 deficient (Mmp3−/−) mice would be protected against lung dysfunction associated with ARDS and maintain a functional pulmonary surfactant system. Wild type (WT) and Mmp3−/− mice were subjected to acid-aspiration followed by mechanical ventilation. Mmp3−/− mice maintained higher arterial oxygenation compared with WT mice at the completion of ventilation. Significant increase in functional large aggregate surfactant forms were observed in Mmp3−/− mice compared with WT mice. These findings further support a role of Mmp3 as an attractive therapeutic target for drug development in the setting of ARDS.

The lungs have potential as a means of systemic drug delivery of macromolecules. Systemic delivery requires crossing of the air-blood barrier, however with molecular size-dependent limitations in lung absorption of large molecules. Systemic availability after inhalation can be improved by absorption enhancers, such as bile salts. Enhancers may potentially interfere with the different constituents of the lungs, e.g. the lung surfactant lining the alveoli or the lung epithelium. We used two in vitro models to investigate the potential effects of bile salts on lung surfactant function (with the constrained drop surfactometer) and on the epithelium in the proximal airways (with the MucilAirTM cell system), respectively. In addition, we measured direct effects on respiration in mice inhaling bile salt aerosols. The bile salts inhibited lung surfactant function at different dose levels, however they did not affect the integrity of ciliated cells at the tested doses. Furthermore, the bile salt aerosols induced changes in the breathing pattern of mice indicative of pulmonary irritation. The bile salts were ranked according to potency in vitro for surfactant function disruption and in vivo for induction of pulmonary irritation. The ranking was the same, suggesting a correlation between the interference with lung surfactant and the respiratory response.

The role of mitochondrial energy metabolism in maintaining lung function is not understood. We previously observed reduced lung function in mice lacking the fatty acid oxidation enzyme long-chain acyl-CoA dehydrogenase (LCAD). Here, we demonstrate that long-chain acylcarnitines, a class of lipids secreted by mitochondria when metabolism is inhibited, accumulate at the air-fluid interface in LCAD(-/-) lungs. Acylcarnitine accumulation is exacerbated by stress such as influenza infection or by dietary supplementation with l-carnitine. Long-chain acylcarnitines co-localize with pulmonary surfactant, a unique film of phospholipids and proteins that reduces surface tension and prevents alveolar collapse during breathing. In vitro, the long-chain species palmitoylcarnitine directly inhibits the surface adsorption of pulmonary surfactant as well as its ability to reduce surface tension. Treatment of LCAD(-/-) mice with mildronate, a drug that inhibits carnitine synthesis, eliminates acylcarnitines and improves lung function. Finally, acylcarnitines are detectable in normal human lavage fluid. Thus, long-chain acylcarnitines may represent a risk factor for lung injury in humans with dysfunctional fatty acid oxidation.

Bacterial adhesion onto solid surfaces is of importance in a wide spectrum of problems, including environmental microbiology, biomedical research, and various industrial applications. Despite many research efforts, present thermodynamic models that rely on the evaluation of the adhesion energy are often elusive in predicting the bacterial adhesion behavior. Here, we developed a new spectrophotometric method to determine the surface free energy (SFE) of bacterial cells. The adhesion behaviors of five bacterial species, Pseudomonas putida KT2440, Salmonella Typhimurium ATCC 14028, Staphylococcus epidermidis ATCC 12228, Enterococcus faecalis ATCC 29212, and Escherichia coli DH5α, onto two model substratum surfaces, i.e., clean glass and silanized glass surfaces, were studied. We found that bacterial adhesion was unambiguously mediated by the SFE difference between the bacterial cells and the solid substratum. The lower the SFE difference, the higher degree of bacterial adhesion. We therefore propose the use of the SFE difference as an accurate and simple thermodynamic measure for quantitatively predicting bacterial adhesion. The methodological advance and thermodynamic simplification in the paper have implications in controlling bacterial adhesion and biofilm formation on solid surfaces.

In spite of the considerable efforts invested to understand the environmental health and safety (EHS) impacts of ultrafine particles, such as the representative PM2.5, there are still significant knowledge gaps to be filled. No conclusive understandings have been obtained about the physicochemical determinants in accounting for differential adverse outcomes. Here we compared the cytotoxicity of four carbon black (CB) particles with similar physicochemical properties except for their oxygen contents (C824455C1864Printex USB4A). We found that these four CB particles manifested in vitro and in vivo cytotoxicity reversely related to their oxygen contents, namely a hierarchy of cytotoxicity: C824455C1864Printex USB4A. Among these CB particles, the most significant lung injury (e.g. collapses and inflammation) and macrophagic activation were found for C824455 and C1864, in particular for C824455. All these differences in toxicity profiles, including in vitro and in vivo cytotoxicity, pro-inflammatory effects and direct damages to the lung epithelia, should be (at least partially) ascribed to the oxygen content in these CB particles that in turn determined their transformation, i.e. the different aggregation states. Nonetheless, PM2.5 likewise caused severe in vivo and in vitro toxicities to the lung cells and macrophages. This study thus offers more insights into the structure-activity relationship (SAR) and opens a new avenue to elucidate the physicochemical determinants in evoking lung injuries by ultrafine airborne particles.

Acute respiratory distress syndrome (ARDS) is a pulmonary disorder associated with alterations to the pulmonary surfactant system. Recent studies showed that supra-physiological levels of cholesterol in surfactant contribute to impaired function. Since cholesterol is incorporated into surfactant within the alveolar type II cells which derives its cholesterol from serum, it was hypothesized that serum hypercholesterolemia would predispose the host to the development of lung injury due to alterations of cholesterol content in the surfactant system. Wistar rats were randomized to a standard lab diet or a high cholesterol diet for 17–20 days. Animals were then exposed to one of three models of lung injury: i) acid aspiration ii) ventilation induced lung injury, and iii) surfactant depletion. Following physiological monitoring, lungs were lavaged to obtain and analyze the surfactant system. The physiological results showed there was no effect of the high cholesterol diet on the severity of lung injury in any of the three models of injury. There was also no effect of the diet on surfactant cholesterol composition. Rats fed a high cholesterol diet had a significant impairment in surface tension reducing capabilities of isolated surfactant compared to those fed a standard diet exposed to the surfactant depletion injury. In addition, only rats that were exposed to ventilation induced lung injury had elevated levels of surfactant associated cholesterol compared to non-injured rats. It is concluded that serum hypercholesterolemia does not predispose rats to altered surfactant cholesterol composition or to lung injury. Elevated cholesterol within surfactant may be a marker for ventilation induced lung damage., Graphical abstract fx1, Highlights • Hypercholesterolemia in rats did not alter the susceptibility to lung injury. • Elevated cholesterol within surfactant is observed in ventilation induced lung injury. • Increases in surfactant-associated cholesterol depend on the type of lung injury.

Private consumers and professionals may experience acute inhalation toxicity after inhaling aerosolized impregnation products. The distinction between toxic and non-toxic products is difficult to make for producers and product users alike, as there is no clearly described relationship between the chemical composition of the products and induction of toxicity. The currently accepted method for determination of acute inhalation toxicity is based on experiments on animals; it is time-consuming, expensive and causes stress for the animals. Impregnation products are present on the market in large numbers and amounts and exhibit great variety. Therefore, an alternative method to screen for acute inhalation toxicity is needed. The aim of our study was to determine if inhibition of lung surfactant by impregnation products in vitro could accurately predict toxicity in vivo in mice. We tested 21 impregnation products using the constant flow through set-up of the constrained drop surfactometer to determine if the products inhibited surfactant function or not. The same products were tested in a mouse inhalation bioassay to determine their toxicity in vivo. The sensitivity was 100%, i.e., the in vitro method predicted all the products that were toxic for mice to inhale. The specificity of the in vitro test was 63%, i.e., the in vitro method found three false positives in the 21 tested products. Six of the products had been involved in accidental human inhalation where they caused acute inhalation toxicity. All of these six products inhibited lung surfactant function in vitro and were toxic to mice.

Environmental exposure and health risk upon engineered nanomaterials are increasingly concerned. The family of mesoporous carbon nanomaterials (MCNs) is a rising star in nanotechnology for multidisciplinary research with versatile applications in electronics, energy and gas storage, and biomedicine. Meanwhile, there is mounting concern on their environmental health risks due to the growing production and usage of MCNs. The lung is the primary site for particle invasion under environmental exposure to nanomaterials. Here, we studied the comprehensive toxicological profile of MCNs in the lung under the scenario of moderate environmental exposure. It was found that at a low concentration of 10μg/mL MCNs induced biophysical inhibition of natural pulmonary surfactant. Moreover, MCNs at similar concentrations reduced viability of J774A.1 macrophages and lung epithelial A549 cells. Incubating with nature pulmonary surfactant effectively reduced the cytotoxicity of MCNs. Regarding the pro-inflammatory responses, MCNs activated macrophages in vitro, and stimulated lung inflammation in mice after inhalation exposure, associated with lung fibrosis. Moreover, we found that the size of MCNs played a significant role in regulating cytotoxicity and pro-inflammatory potential of this nanomaterial. In general, larger MCNs induced more pronounced cytotoxic and pro-inflammatory effects than their smaller counterparts. Our results provided valuable information on the toxicological profile and environmental health risks of MCNs, and suggested that fine-tuning the size of MCNs could be a practical precautionary design strategy to increase safety and biocompatibility of this nanomaterial.

Alterations to the pulmonary surfactant system have been observed consistently in ventilation-induced lung injury (VILI) including composition changes and impairments in the surface tension reducing ability of the isolated extracellular surfactant. However, there is limited information about the effects of VILI on the intracellular form of surfactant, the lamellar body. It is hypothesized that VILI leads to alterations of lamellar body numbers and function. To test this hypothesis, rats were randomized to one of three groups, nonventilated controls, control ventilation, and high tidal volume ventilation (VILI). Following physiological assessment to confirm lung injury, isolated lamellar bodies were tested for surfactant function on a constrained sessile drop surfactometer. A separate cohort of animals was used to fix the lungs followed by examination of lamellar body numbers and morphology using transmission electron microscopy. The results showed an impaired ability of reducing surface tension for the lamellar bodies isolated from the VILI group as compared with the two other groups. The morphological assessment revealed that the number, and the relative area covered by, lamellar bodies were significantly decreased in animals with VILI animals as compared with the other groups. It is concluded that VILI causes significant alterations to lamellar bodies. It is speculated that increased secretion causes a depletion of lamellar bodies that cannot be compensated by de novo synthesis of surfactant in these injured lungs.

Vascular plants transport water under negative pressure without constantly creating gas bubbles that would disable their hydraulic systems. Attempts to replicate this feat in artificial systems almost invariably result in bubble formation, except under highly controlled conditions with pure water and only hydrophilic surfaces present. In theory, conditions in the xylem should favor bubble nucleation even more: there are millions of conduits with at least some hydrophobic surfaces, and xylem sap is saturated or sometimes supersaturated with atmospheric gas and may contain surface-active molecules that can lower surface tension. So how do plants transport water under negative pressure? Here, we show that angiosperm xylem contains abundant hydrophobic surfaces as well as insoluble lipid surfactants, including phospholipids, and proteins, a composition similar to pulmonary surfactants. Lipid surfactants were found in xylem sap and as nanoparticles under transmission electron microscopy in pores of intervessel pit membranes and deposited on vessel wall surfaces. Nanoparticles observed in xylem sap via nanoparticle-tracking analysis included surfactant-coated nanobubbles when examined by freeze-fracture electron microscopy. Based on their fracture behavior, this technique is able to distinguish between dense-core particles, liquid-filled, bilayer-coated vesicles/liposomes, and gas-filled bubbles. Xylem surfactants showed strong surface activity that reduces surface tension to low values when concentrated as they are in pit membrane pores. We hypothesize that xylem surfactants support water transport under negative pressure as explained by the cohesion-tension theory by coating hydrophobic surfaces and nanobubbles, thereby keeping the latter below the critical size at which bubbles would expand to form embolisms.

Microalgae are one of the most promising renewable energy sources with environmental sustainability. The surface free energy of microalgal cells determines their biofouling and bioflocculation behavior and hence plays an important role in microalgae cultivation and harvesting. To date, the surface energetic properties of microalgal cells are still rarely studied. We developed a novel spectrophotometric method for directly determining the surface free energy of microalgal cells. The principles of this method are based on analyzing colloidal stability of microalgae suspensions. We have shown that this method can effectively differentiate the surface free energy of four microalgal strains, i.e., marine Chlorella sp., marine Nannochloris oculata, freshwater autotrophic Chlorella sp., and freshwater heterotrophic Chlorella sp. With advantages of high-throughput and simplicity, this new spectrophotometric method has the potential to evolve into a standard method for measuring the surface free energy of cells and abiotic particles.

Polymeric nanoparticles (NPs) have had much focus on their ability to penetrate deep pulmonary structures as potential drug carriers. However, research on the toxicological effects of NPs is in its infancy, and interaction mechanisms are largely unknown. Studies have shown that the interactions with pulmonary structures are heavily dependent on the physicochemical properties of the NPs. Here, we studied how hydrophobicity of polymeric NPs affect pulmonary surfactant biophysics in vitro. We investigated a naturally derived lung surfactant, Infasurf, mixed with three polymeric NPs with varying hydrophobicities through the use of a Langmuir trough and atomic force microscopy to probe the intricacies at the air–water interface. In addition, a novel technique, constrained drop surfactometer (CDS), was used to gain insight on how NPs affect surfactant under physiological conditions. We found that the CDS can be used as a sensitive precautionary tool for identifying surfactant inhibition by NPs. Our data suggest...

Interaction with the pulmonary surfactant film, being the first line of host defense, represents the initial bio-nano interaction in the lungs. Such interaction determines the fate of the inhaled nanoparticles and their potential therapeutic or toxicological effect. Despite considerable progress in optimizing physicochemical properties of nanoparticles for improved delivery and targeting, the mechanisms by which inhaled nanoparticles interact with the pulmonary surfactant film are still largely unknown. Here, using combined in vitro and in silico methods, we show how hydrophobicity and surface charge of nanoparticles differentially regulate the translocation and interaction with the pulmonary surfactant film. While hydrophilic nanoparticles generally translocate quickly across the pulmonary surfactant film, a significant portion of hydrophobic nanoparticles are trapped by the surfactant film and encapsulated in lipid protrusions upon film compression. Our results support a novel model of pulmonary surfactant lipoprotein corona associated with inhaled nanoparticles of different physicochemical properties. Our data suggest that the study of pulmonary nanotoxicology and nanoparticle-based pulmonary drug delivery should consider this lipoprotein corona.

A self-assembled phospholipid monolayer at an air–water interface is a well-defined model system for studying surface thermodynamics, membrane biophysics, thin-film materials, and colloidal soft matter. Here we report a study of two-dimensional phase transitions in the dipalmitoylphosphatidylcholine (DPPC) monolayer at the air–water interface using a newly developed methodology called constrained drop surfactometry (CDS). CDS is superior to the classical Langmuir balance in its capacity for rigorous temperature control and leak-proof environments, thus making it an ideal alternative to the Langmuir balance for studying lipid polymorphism. In addition, we have developed a novel Langmuir–Blodgett (LB) transfer technique that allows the direct transfer of lipid monolayers from the droplet surface under well-controlled conditions. This LB transfer technique permits the direct visualization of phase coexistence in the DPPC monolayer. With these technological advances, we found that the two-dimensional phase behavior of the DPPC monolayer is analogous to the three-dimensional phase transition of a pure substance. This study has implications in the fundamental understanding of surface thermodynamics as well as applications such as self-assembled monolayers and pulmonary surfactant biophysics.

Droplet manipulation plays an important role in a wide range of scientific and industrial applications, such as synthesis of thin-film materials, control of interfacial reactions, and operation of digital microfluidics. Compared to micron-sized droplets, which are commonly considered as spherical beads, millimeter-sized droplets are generally deformable by gravity, thus introducing nonlinearity into control of droplet properties. Such a nonlinear drop shape effect is especially crucial for droplet manipulation, even for small droplets, at the presence of surfactants. In this paper, we have developed a novel closed-loop axisymmetric drop shape analysis (ADSA), integrated into a constrained drop surfactometer (CDS), for manipulating millimeter-sized droplets. The closed-loop ADSA generalizes applications of the traditional drop shape analysis from a surface tension measurement methodology to a sophisticated tool for manipulating droplets in real time. We have demonstrated the feasibility and advantages of the closed-loop ADSA in three applications, including control of drop volume by automatically compensating natural evaporation, precise control of surface area variations for high-fidelity biophysical simulations of natural pulmonary surfactant, and steady control of surface pressure for in situ Langmuir–Blodgett transfer from droplets. All these applications have demonstrated the accuracy, versatility, applicability, and automation of this new ADSA-based droplet manipulation technique. Combining with CDS, the closed-loop ADSA holds great promise for advancing droplet manipulation in a variety of material and surface science applications, such as thin-film fabrication, self-assembly, and biophysical study of pulmonary surfactant.

Corticosteroids have been widely used in clinical medicine as a first-line therapy to modify the inflammatory response in many pulmonary and systemic diseases. Inhaled and intratracheally administered corticosteroids have a particular interest in that their use allows the clinician to circumvent systemic steroid side effects. However, it is vital that corticosteroids delivered via the lungs not interfere with surface activity of the pulmonary surfactant lining layer.We found differential effects of cholesterol and budesonide on the biophysical properties of a cholesterol-free clinical surfactant preparation, Curosurf. At a low concentration up to 1%, both steroids play a similar role of fluidizing the surfactant film. However, when steroid concentration is increased to 10%, cholesterol induces a unique phase transition that abolishes the surface activity of the Curosurf film. By contrast, 10% budesonide simply fluidizes the film, thus having only limited effects on surface activity.Together with those of a previous study using a cholesterol-containing surfactant, our findings suggest that cholesterol-free surfactant preparations may be more advantageous than cholesterol-containing preparations as a carrier of budesonide because a larger amount of the drug may be delivered to the lungs without significantly compromising the surface activity of pulmonary surfactant.Langmuir balance was used to study the effect of cholesterol and budesonide added at different concentrations on surface activity of Curosurf. Atomic force microscopy (AFM) was used to reveal their effects on the interfacial molecular organization and lateral structure of Curosurf films.

Clinical pulmonary surfactant is routinely used to treat premature newborns with respiratory distress syndrome, and has shown great potential in alleviating a number of neonatal and adult respiratory diseases. Despite extensive study of chemical composition, surface activity, and clinical performance of various surfactant preparations, a direct comparison of surfactant films is still lacking. In this study, we use atomic force microscopy to characterize and compare four animal-derived clinical surfactants currently used throughout the world, i.e., Survanta, Curosurf, Infasurf and BLES. These modified-natural surfactants are further compared to dipalmitoyl phosphatidylcholine (DPPC), a synthetic model surfactant of DPPC:palmitoyl-oleoyl phosphatidylglycerol (POPG) (7:3), and endogenous bovine natural surfactant. Atomic force microscopy reveals significant differences in the lateral structure and molecular organization of these surfactant preparations. These differences are discussed in terms of DPPC and cholesterol contents. We conclude that all animal-derived clinical surfactants assume a similar structure of multilayers of fluid phospholipids closely attached to an interfacial monolayer enriched in DPPC, at physiologically relevant surface pressures. This study provides the first comprehensive survey of the lateral structure of clinical surfactants at various surface pressures. It may have clinical implications on future application and development of surfactant preparations.

Natural lung surfactant contains less than 40% disaturated phospholipids, mainly dipalmitoylphosphatidylcholine (DPPC). The mechanism by which lung surfactant achieves very low near-zero surface tensions, well below its equilibrium value, is not fully understood. To date, the low surface tension of lung surfactant is usually explained by a squeeze-out model which predicts that upon film compression non-DPPC components are gradually excluded from the air-water interface into a surface-associated surfactant reservoir. However, detailed experimental evidence of the squeeze-out within the physiologically relevant high surface pressure range is still lacking. In the present work, we studied four animal-derived clinical surfactant preparations, including Survanta, Curosurf, Infasurf, and BLES. By comparing compression isotherms and lateral structures of these surfactant films obtained by atomic force microscopy within the physiologically relevant high surface pressure range, we have derived an updated squeeze-out model. Our model suggests that the squeeze-out originates from fluid phases of a phase-separated monolayer. The squeeze-out process follows a nucleation-growth model and only occurs within a narrow surface pressure range around the equilibrium spreading pressure of lung surfactant. After the squeeze-out, three-dimensional nuclei stop growing, thereby resulting in a DPPC-enriched interfacial monolayer to reduce the air-water surface tension to very low values.

Current therapies for nerve regeneration within injured tissues have had limited success due to complicated neural anatomy and inhibitory barriers in situ. Recent advancements in 3D bioprinting technologies have enabled researchers to develop novel 3D scaffolds with complex architectures in an effort to mitigate the challenges that beset reliable and defined neural tissue regeneration. Among several possible neuroregenerative treatment approaches that are being explored today, 3D bioprinted scaffolds have the unique advantage of being highly modifiable, which promotes greater resemblance to the native biological architecture of in vivo systems. This high architectural similarity between printed constructs and in vivo structures is thought to facilitate a greater capacity for repair of damaged nerve tissues. In this review, advances of several 3D bioprinting methods are introduced, including laser bioprinting, inkjet bioprinting, and extrusion-based printing. In addition, the emergence of 4D printing is discussed, which adds a dimension of transformation over time to traditional 3D printing. Finally, an overview of emerging trends in advanced bioprinting materials is provided and their therapeutic potential for application in neural tissue regeneration is evaluated in both the central nervous system and the peripheral nervous system.

Pulmonary surfactant (PS) dysfunction because of the leakage of serum proteins into the alveolar space could be an operative pathogenesis in acute respiratory distress syndrome. Albumin-inhibited PS is a commonly used in vitro model for studying surfactant abnormality in acute respiratory distress syndrome. However, the mechanism by which PS is inhibited by albumin remains controversial. This study investigated the film organization of albumin-inhibited bovine lipid extract surfactant (BLES) with and without surfactant protein A (SP-A), using atomic force microscopy. The BLES and albumin (1:4w/w) were cospread at an air-water interface from aqueous media. Cospreading minimized the adsorption barrier for phospholipid vesicles imposed by preadsorbed albumin molecules, i.e., inhibition because of competitive adsorption. Atomic force microscopy revealed distinct variations in film organization, persisting up to 40mN/m, compared with pure BLES monolayers. Fluorescence confocal microscopy confirmed that albumin remained within the liquid-expanded phase of the monolayer at surface pressures higher than the equilibrium surface pressure of albumin. The remaining albumin mixed with the BLES monolayer so as to increase film compressibility. Such an inhibitory effect could not be relieved by repeated compression-expansion cycles or by adding surfactant protein A. These experimental data indicate a new mechanism of surfactant inhibition by serum proteins, complementing the traditional competitive adsorption mechanism.

Monolayers of a functional pulmonary surfactant (PS) can reach very low surface tensions well below their equilibrium value. The mechanism by which PS monolayers reach such low surface tensions and maintain film stability remains unknown. As shown previously by fluorescence microscopy, phospholipid phase transition and separation seem to be important for the normal biophysical properties of PS. This work studied phospholipid phase transitions and separations in monolayers of bovine lipid extract surfactant using atomic force microscopy. Atomic force microscopy showed phospholipid phase separation on film compression and a monolayer-to-multilayer transition at surface pressure 40–50mN/m. The tilted-condensed phase consisted of domains not only on the micrometer scale, as detected previously by fluorescence microscopy, but also on the nanometer scale, which is below the resolution limits of conventional optical methods. The nanodomains were embedded uniformly within the liquid-expanded phase. On compression, the microdomains broke up into nanodomains, thereby appearing to contribute to tilted-condensed and liquid-expanded phase remixing. Addition of surfactant protein A altered primarily the nanodomains and promoted the formation of multilayers. We conclude that the nanodomains play a predominant role in affecting the biophysical properties of PS monolayers and the monolayer-to-multilayer transition.

The interaction between a cationic polyelectrolyte, chitosan, and an exogenous bovine lung extract surfactant (BLES) was studied using dynamic compression/expansion cycles of dilute BLES preparations in a Constrained Sessile Drop (CSD) device equipped with an environmental chamber conditioned at 37 °C and 100% R.H. air. Under these conditions, dilute BLES preparations tend to produce variable and relatively high minimum surface tensions. Upon addition of “low” chitosan to BLES ratios, the minimum surface tension of BLES–chitosan preparations were consistently low (i.e. 15 mJ/m2). The zeta potential of the lung surfactant aggregates in the subphase suggests that chitosan binds to the anionic lipids (phosphatidyl glycerols) in BLES, and that this binding is ultimately responsible for the changes in the surface activity (elasticity and stability) of these surfactant–polyelectrolyte mixtures. Furthermore the transition from “low” to “high” chitosan to BLES ratios correlates with the flocculation and de-flocculation of surfactant aggregates in the subphase. It is proposed that the aggregation/segregation of “patches” of anionic lipids in the surfactant monolayer produced at different chitosan to BLES ratios explains the enhancing/inhibitory effects of chitosan. These observations highlight the importance of electrostatic interactions in lung surfactant systems.

Automatic surface tension measurement of turbid liquids using a bubble method (e.g., pendant/captive bubble) or interfacial tension measurement of some liquid–liquid systems necessitates an image analysis scheme robust against noise. Measuring the surface tension of lung surfactant–polymer systems using the combination of axisymmetric drop shape analysis (ADSA) and a captive bubble is such an example. We have recently developed a sophisticated image analysis scheme featuring the combination of the Canny edge detector and a novel edge smoothing technique called axisymmetric liquid fluid interfaces-smoothing (ALFI-S). The Canny edge detector is highly noise-resistant and ALFI-S is efficient in further removing noise close to the bubble profile (i.e., adhering noise). However, the procedure of eliminating noise far away from the bubble profile (i.e., isolated noise) is still not satisfactory in the previous scheme. Here a component labeling method is developed to automatically remove isolated noise. Component labeling refers to the process of detecting connected objects in a digital image. Once labeling is completed, information, such as area, location and pixel intensity, of these separate objects can be obtained. Hence, component labeling can be used as a region-based segmentation technique that is capable of differentiating the bubble and the isolated noise. The new component labeling-based noise reduction method is used to analyze captive bubble images with different amounts of noise. It is found that with the help of the labeling procedure smooth edges can be detected with a simple set of user-specified parameters even from images with extensive noise. Combined with the previous image analysis scheme, the component labeling method significantly improves the effectiveness and reliability of ADSA in automatically measuring surface tension from noisy images.

Surfactant protein B (SP-B) is essential for lung function. Previous studies have indicated that a SP-B 1580C/T polymorphism (SNP rs1130866) was associated with lung diseases including pneumonia. The SNP causes an altered N-linked glycosylation modification at Asn129 of proSP-B, e.g. the C allele with this glycosylation site but not in the T allele. This study aimed to generate humanized SP-B transgenic mice carrying either SP-B C or T allele without a mouse SP-B background and then examine functional susceptibility to bacterial pneumonia in vivo . A total of 18 transgenic mouse founders were generated by the DNA microinjection method. These founders were back-crossed with SP-B KO mice to eliminate mouse SP-B background. Four founder lines expressing similar SP-B levels to human lung were chosen for further investigation. After intratracheal infection with 50 μl of Pseudomonas aeruginosa solution (1 × 10 6 CFU/mouse) or saline in SP-B-C, SP-B-T mice the mice were sacrificed 24 h post-infection and tissues were harvested. Analysis of surfactant activity revealed differential susceptibility between SP-B-C and SP-B-T mice to bacterial infection, e.g. higher minimum surface tension in infected SP-B-C versus infected SP-B-T mice. These results demonstrate for the first time that human SP-B C allele is more susceptible to bacterial pneumonia than SP-B T allele in vivo .