Search

Anthropogenic climate change is now considered to be one of the main factors causing an increase in both the frequency and severity of wildfires. These fires are prone to release substantial quantities of CO2 into the atmosphere and to endanger natural ecosystems and biodiversity. Depending on the ecosystem and climate regime, fires have distinct triggering factors and impacts. To better analyse this phenomenon, we investigated post-fire vegetation anomalies over different biomes, from 2012 to 2020. The study was performed using several remotely sensed quantities ranging from visible–infrared vegetation indices (the enhanced vegetation index (EVI)) to vegetation opacities obtained at several passive-microwave wavelengths (X-band, C-band, and L-band vegetation optical depth (X-VOD, C-VOD, and L-VOD)), ranging from 2 to 20 cm. It was found that C- and X-VOD are mostly sensitive to fire impact on low-vegetation areas (grass and shrublands) or on tree leaves, while L-VOD depicts the fire impact on tree trunks and branches better. As a consequence, L-VOD is probably a better way of assessing fire impact on biomass. The study shows that L-VOD can be used to monitor fire-affected areas as well as post-fire recovery, especially over densely vegetated areas.

Microwave radiometry has provided valuable spaceborne observations of Earth's geophysical properties for decades. The recent SMOS, Aquarius, and SMAP satellites have demonstrated the value of measurements at 1400 MHz for observing surface soil moisture, sea surface salinity, sea ice thickness, soil freeze/thaw state, and other geophysical variables. However, the information obtained is limited by penetration through the subsurface at 1400 MHz and by a reduced sensitivity to surface salinity in cold or wind-roughened waters. Recent airborne experiments have shown the potential of brightness temperature measurements from 500–1400 MHz to address these limitations by enabling sensing of soil moisture and sea ice thickness to greater depths, sensing of temperature deep within ice sheets, improved sensing of sea salinity in cold waters, and enhanced sensitivity to soil moisture under vegetation canopies. However, the absence of significant spectrum reserved for passive microwave measurements in the 500–1400 MHz band requires both an opportunistic sensing strategy and systems for reducing the impact of radio-frequency interference. Here, we summarize the potential advantages and applications of 500–1400 MHz microwave radiometry for Earth observation and review recent experiments and demonstrations of these concepts. We also describe the remaining questions and challenges to be addressed in advancing to future spaceborne operation of this technology along with recommendations for future research activities.

We address the optimization problem of antenna placement on satellite-mounted interferometric synthetic-aperture instruments. In classic designs, the antennas on satellites are aligned regularly on the satellite’s frame. Inspired by methods proposed for the placement of antennas in astronomical interferometers, such as ALMA or SKA, we explore irregular layouts and show that they are a valid alternative in terms of spatial resolution and reconstruction error. We formalize mathematically the optimization problem of irregularly placed antennas and we show that this kind of arrays can still be calibrated with the same methods used for regular arrays. Finally, this strategy is evaluated in the context of soil moisture and ocean salinity (SMOS) follow-up concepts, such as SMOS-HR (high resolution), for which the new optimized irregular configurations are compared to the regular ones.

We report a unique multiyear L-band microwave radiometry dataset collected at the Maqu site on the eastern Tibetan Plateau and demonstrate its utilities in advancing our understandings of microwave observations of land surface processes. The presented dataset contains measurements of L-band brightness temperature by an ELBARA-III microwave radiometer in horizontal and vertical polarization, profile soil moisture and soil temperature, turbulent heat fluxes, and meteorological data from the beginning of 2016 till August 2019, while the experiment is still continuing. Auxiliary vegetation and soil texture information collected in dedicated campaigns are also reported. This dataset can be used to validate the Soil Moisture and Ocean Salinity (SMOS) and Soil Moisture Active Passive (SMAP) satellite based observations and retrievals, verify radiative transfer model assumptions and validate land surface model and reanalysis outputs, retrieve soil properties, as well as to quantify land-atmosphere exchanges of energy, water and carbon and help to reduce discrepancies and uncertainties in current Earth System Models (ESM) parameterizations. Measurement cases in winter, pre-monsoon, monsoon and post-monsoon periods are presented., Measurement(s) microwave radiation • soil moisture • atmospheric wind • Solar Radiation • rain • soil • CO2/H2O flux • thermal radiation • temperature of soil Technology Type(s) Radiometry (Microwave) • Sensor Device • pyranometer • Gauge or Meter Device • particle size analyzer • pyrgeometer Sample Characteristic - Environment land Sample Characteristic - Location Tibetan Plateau Machine-accessible metadata file describing the reported data: 10.6084/m9.figshare.12818261

Climate change increases the occurrence and severity of droughts due to increasing temperatures, altered circulation patterns, and reduced snow occurrence. While Europe has suffered from drought events in the last decade unlike ever seen since the beginning of weather recordings, harmonized long-term datasets across the continent are needed to monitor change and support predictions. Here we present soil moisture data from 66 cosmic-ray neutron sensors (CRNSs) in Europe (COSMOS-Europe for short) covering recent drought events. The CRNS sites are distributed across Europe and cover all major land use types and climate zones in Europe. The raw neutron count data from the CRNS stations were provided by 24 research institutions and processed using state-of-the-art methods. The harmonized processing included correction of the raw neutron counts and a harmonized methodology for the conversion into soil moisture based on available in situ information. In addition, the uncertainty estimate is provided with the dataset, information that is particularly useful for remote sensing and modeling applications. This paper presents the current spatiotemporal coverage of CRNS stations in Europe and describes the protocols for data processing from raw measurements to consistent soil moisture products. The data of the presented COSMOS-Europe network open up a manifold of potential applications for environmental research, such as remote sensing data validation, trend analysis, or model assimilation The dataset could be of particular importance for the analysis of extreme climatic events at the continental scale. Due its timely relevance in the scope of climate change in the recent years, we demonstrate this potential application with a brief analysis on the spatiotemporal soil moisture variability. The dataset, entitled "Dataset of COSMOS-Europe: A European network of Cosmic-Ray Neutron Soil Moisture Sensors", is shared via Forschungszentrum Julich: https://doi.org/10.34731/x9s3-kr48 (Bogena and Ney, 2021)., Earth System Science Data, 14 (3), ISSN:1866-3516, ISSN:1866-3508

International audience; The northern land biosphere is believed to be the main global sink of CO2, but the contribution of Europe is uncertain. While bottom-up estimates and inverse atmospheric transport studies based on atmospheric CO2 observed in situ or from space by OCO-2 point to a moderate rate of uptake, some other inversions based on remotely sensed atmospheric CO2 from GOSAT/SCIAMACHY and biomass estimates from passive microwave satellite data point to a large sink of around 1 Gt C/yr. We present results from combining both approaches in a data assimilation framework, inverting a biosphere model against in situ atmospheric CO2 and passive microwave measurements. When assimilating all observations, we estimate a European carbon sink of 0.303 +/- 0.083 Gt C/yr for 2010-2015. The result agrees with other bottom-up studies and atmospheric inversions using in situ CO2 or OCO-2 observations pointing to potential data problems when using observations from GOSAT or SCIAMACHY to estimate the European CO2 sink.

Anthropogenic climate change is now considered to be one of the main factors causing an increase in both frequency and severity of wildfires. These fires are prone to release substantial quantities of CO2 in the atmosphere and to destroy natural ecosystems while reducing biodiversity. Depending on the ecosystem and climate regime, fires have distinct triggering factors and impacts. To better analyse and describe fire impact on different biomes, we investigated pre and post fire vegetation anomalies at global scale. The study was performed using several remotely sensed quantities ranging from optical vegetation indices (the enhanced vegetation index (EVI)) to vegetation opacities obtained at several microwave wavelengths (X-band, C-band, and L-band vegetation optical depth (X-VOD, C-VOD, and L-VOD)), ranging from 2 to 20 cm. It was found that C- and X-VOD are mostly sensitive to fire over low vegetation areas (grass and small bushes) or over tree leaves; while L-VOD depicts better the fire impact on tree trunks and branches. As a consequence, L-VOD is probably a better way of assessing fire impact on biomass. The study shows that L-VOD can be used to monitor fire affected areas as well as post-fire recovery, especially over densely vegetated areas.

Human-caused climate change increases the occurrence and severity of droughts due to increasing temperatures, altered circulation patterns and reduced snow occurrence. For example, Europe has suffered from drought events in the last decade like never since the beginning of weather recording. Here we present soil moisture data from 65 Cosmic-ray neutron sensors (CRNS) in Europe (COSMOS-Europe for short) covering recent drought events. The CRNS sites are distributed across Europe and cover all major land use types and climate zones in Europe. The raw neutron count data from the CRNS stations were provided by 23 research institutions and processed using state-of-the-art methods. The harmonised processing included correction of the raw neutron counts, and a harmonised methodology for the conversion into soil moisture based on available in-situ information. In addition, information on the data uncertainty is provided with the dataset, information that is particularly useful for remote sensing and modelling applications. This paper presents the current spatiotemporal coverage of CRNS stations in Europe and describes the protocols for data processing from raw measurements to consistent soil moisture products as well as first results on how the recent drought events have been captured by the CRNS network. This harmonised European soil moisture dataset will help both hydrologists and climate scientists to study individual drought events, to understand their causes, to evaluate and improve their modelling, and to estimate the extremity of current events. The dataset, entitled “Dataset of COSMOS-Europe: A European network of Cosmic-Ray Neutron Soil Moisture Sensors”, is shared via Forschungszentrum Jülich: https://doi.org/10.34731/x9s3-kr48 (Bogena and Ney, 2021).

International audience; The Soil Moisture and Ocean Salinity (SMOS) satellite has been providing global data for more than 11 years. The algorithm to retrieve surface soil moisture (SM) and vegetation optical depth (VOD) from Brightness Temperatures (TB) has constantly evolved as our understanding of the instrument and of the responses to various ecosystems increased. The evolution of the radiative transfer modelling used in the inversion process is in part based upon ground measurements done on experimental sites. We present the particular case of an L-band radiometer placed on top of a 800- meter-high cliff. This design allows us to study large and various scenes when compared to classical experiments where a radiometer is placed 10–20 m above a surface. With our set up, the footprints cover areas larger than 300 m in diameter, covering thus several land use types and the footprint can be directed towards different dominant land classes (forest, crops, urban etc…). This paper presents the whole set up consisting of in situ measurements (soil moisture and surface temperatures) and L-band radiometry acquired by the LEWIS instrument at high incidence angles. We perform SM/VOD retrievals from brightness temperatures using various configurations which are compared to the in situ observations. We test in particular a 2-VOD retrieval approach that consists in deriving one SM for the entire scene but two VOD, one for agricultural/low vegetation and a VOD for the forest parts, which improves the performance of the SM/VOD retrievals.

Soil Moisture and Ocean Salinity (SMOS) mission has successfully contributed to global soil moisture products since 2009. Validation and calibration activities were conducted worldwide, yet some of the validation results do not fulfill the targeted accuracy of ±0.04 $\text{m}^{3}\text{m}^{-3}$ . This paper presented the site-specific calibration of the V620 retrieval algorithm with in situ data collected at selected agricultural sites in the humid tropical regions, Malaysia. This set of data has been validated where low accuracy of SMOS soil moisture products was found. To improve the SMOS soil moisture retrieval, calibration of SMOS soil moisture retrieval algorithm based on the L-band Microwave Emission and Biosphere model and SMOS Level 1C $\text{T}_{\mathrm {B}}$ products, considering the local parameters was conducted. The calibration proves that these site-specific parameters improve the product’s accuracy. Validation of SMOS Level 2 product with in situ data showed bias, root-mean-square error (RMSE), and unbiased RMSE (ubRMSE) ranging from 0.050 to 0.118 $\text{m}^{3}\text{m}^{-3}$ , 0.068 to 0.142 $\text{m}^{3}\text{m}^{-3}$ , and 0.069 to 0.103 $\text{m}^{3}\text{m}^{-3}$ , respectively. The soil moisture retrieval based on the calibrated model showed an improved bias of 0.020–0.056 $\text{m}^{3}\text {m}^{-3}$ and RMSE of 0.026–0.065 $\text{m}^{3}\text{m}^{-3}$ . The ubRMSE ranges from 0.017 to 0.034 $\text{m}^{3}\text{m}^{-3}$ . Recently released SMOS-IC V105 product was also validated, where small improvements were noticed when compared to the accuracy of SMOS Level 2. This paper shows the importance of local parameters in retrieving soil moisture with higher accuracy compared to the use of global generalized parameters that are used in the original SMOS soil moisture retrieval algorithm.

Soil moisture (SM) is a key state variable in understanding the climate system through its control on the land surface energy, water budget partitioning, and the carbon cycle. Monitoring SM at regional scale has become possible thanks to microwave remote sensing. In the past two decades, several satellites were launched carrying on board either radiometer (passive) or radar (active) or both sensors in different frequency bands with various spatial and temporal resolutions. Soil moisture algorithms are in rapid development and their improvements/revisions are ongoing. The latest SM retrieval products and versions of products that have been recently released are not yet, to our knowledge, comprehensively evaluated and inter-compared over different ecoregions and climate conditions. The aim of this paper is to comprehensively evaluate the most recent microwave-based SM retrieval products available from NASA's (National Aeronautics and Space Administration) SMAP (Soil Moisture Active Passive) satellite, ESA's led mission (European Space Agency) SMOS (Soil Moisture and Ocean Salinity) satellite, ASCAT (Advanced Scatterometer) sensor on board the meteorological operational (Metop) platforms Metop-A and Metop-B, and the ESA Climate Change Initiative (CCI) blended long-term SM time series. More specifically, in this study we compared SMAPL3 V4, SMOSL3 V300, SMOSL2 V650, ASCAT H111, and CCI V04.2 and the new SMOS-IC (V105) SM product. This evaluation was achieved using four statistical scores: Pearson correlation (considering both original observations and anomalies), RMSE, unbiased RMSE, and Bias between remotely-sensed SM retrievals and ground-based measurements from >1000 stations from 17 monitoring networks, spread over the globe, disseminated through the International Soil Moisture Network (ISMN). The analysis reveals that the performance of the remotely-sensed SM retrievals generally varies depending on ecoregions, land cover types, climate conditions, and between the monitoring networks. It also reveals that temporal sampling of the data, the frequency of data in time and the spatial coverage, affect the performance metrics. Overall, the performance of SMAP and SMOS-IC products compared slightly better with respect to the ISMN in situ observations than the other remotely-sensed products. ispartof: REMOTE SENSING OF ENVIRONMENT vol:224 pages:289-303 status: published

Vegetation optical depth (VOD) is a remotely sensed indicator characterizing the attenuation of the Earth's thermal emission at microwave wavelengths by the vegetation layer. At L-band, VOD can be used to estimate and monitor aboveground biomass (AGB), a key component of the Earth's surface and of the carbon cycle. We observed a strong anti-correlation between SMOS (Soil Moisture and Ocean Salinity) L-band VOD (L-VOD) and soil moisture (SM) anomalies over seasonally inundated areas, confirming previous observations of an unexpected decline in K-band VOD during flooding (Jones et al., 2011). These results could be, at least partially, due to artefacts affecting the retrieval and could lead to uncertainties on the derived L-VOD during flooding. To study the behaviour of SMOS satellite L-VOD retrieval algorithm over seasonally inundated areas, the passive microwave L-MEB (L-band Microwave Emission of the Biosphere) model was used to simulate the signal emitted by a mixed scene composed of soil and standing water. The retrieval over this inundated area shows an overestimation of SM and an underestimation of L-VOD. This underestimation increases non-linearly with the surface water fraction. The phenomenon is more pronounced over grasslands than over forests. The retrieved L-VOD is typically underestimated by ~10% over flooded forests and up to 100% over flooded grasslands. This is mainly due to the fact that i) low vegetation is mostly submerged under water and becomes invisible to the sensor; and ii) more standing water is seen by the sensor. Such effects can distort the analysis of aboveground biomass (AGB) and aboveground carbon (AGC) estimates and dynamics based on L-VOD. Using the L-VOD/AGB relationship from Rodriguez-Fernandez et al. (2018), we evaluated that AGB can be underestimated by 15/20Mg ha-1 in the largest wetlands, and up to higher values during exceptional meteorological years. Such values are more significant over herbaceous wetlands, where AGB is ~30 Mg ha-1, than over flooded forests, which have typical AGB values of 150-300 Mg ha-1. Consequently, to better estimate the global biomass, surface water seasonality has to be taken into account in passive microwave retrieval algorithms.

This contribution presents the main findings of a recently published review on high-resolution satellite soil moisture applications (https://doi.org/10.1016/j.rse.2020.112162). The scientific community has made significant progress in estimating soil moisture from satellite-based Earth observation data, particularly in operationalizing coarse-resolution (25-50 km) soil moisture products. This presentation summarizes existing applications of satellite-derived soil moisture products and identifies gaps between the characteristics of currently available soil moisture products and the application requirements from various disciplines. This presentation also discusses the efforts devoted to the generation of high-resolution soil moisture products from satellite Synthetic Aperture Radar (SAR) data such as Sentinel-1 C-band backscatter observations and through downscaling of existing coarse-resolution microwave soil moisture products. Open issues and future opportunities of soil moisture remote sensing are discussed, providing guidance for the further development of operational soil moisture products and for bridging the gap between the soil moisture user and supplier communities.The published review is:Peng, J., Albergel, C., Balenzano, A., Brocca, L., Cartus, O., Cosh, M.H., Crow, W.T., Dabrowska-Zielinska, K., Dadson, S., Davidson, M.W.J., de Rosnay, P., Dorigo, W., Gruber, A., Hagemann, S., Hirschi, M., Kerr, Y.H., Lovergine, F., Mahecha, M.D., Marzahn, P., Mattia, F., Musial, J.P., Preuschmann, S., Reichle, R.H., Satalino, G., Silgram, M., van Bodegom, P.M., Verhoest, N.E.C., Wagner, W., Walker, J.P., Wegmüller, U., & Loew, A. (2021). A roadmap for high-resolution satellite soil moisture applications – confronting product characteristics with user requirements. Remote Sensing of Environment, 252, 112162

Hydrological models are useful tools for water resources studies, yet their calibration is still a challenge, especially if aiming at improved estimates of multiple components of the water cycle. This has led the hydrologic community to look for ways to constrain models with multiple variables. Remote sensing estimates of soil moisture are very promising in this sense, especially in large areas for which field observations may be unevenly distributed. However, the use of such data to calibrate hydrological models in a synergistic way is still not well understood, especially in tropical humid areas such as those found in South America. Here, we perform multiple scenarios of multiobjective model optimization with in situ discharge and the SMOS L4 root zone soil moisture product for the Upper Paraná River Basin in South America (drainage area &gt, 900,000 km²), for which discharge data for 136 river gauges are used. An additional scenario is used to compare the relative impacts of using all river gauges and a small subset containing nine gauges only. Across the basin, the joint calibration (CAL-DS) using discharge and soil moisture leads to improved precision and accuracy for both variables. The discharges estimated by CAL-DS (median KGE improvement for discharge was 0.14) are as accurate as those obtained with the calibration with discharge only (median equal to 0.14), while the CAL-DS soil moisture retrieval is practically as accurate (median KGE improvement for soil moisture was 0.11) as that estimated using the calibration with soil moisture only (median equal to 0.13). Nonetheless, the individual calibration with discharge rates is not able to retrieve satisfactory soil moisture estimates, and vice versa. These results show the complementarity between these two variables in the model calibration and highlight the benefits of considering multiple variables in the calibration framework. It is also shown that, by considering only nine gauges instead of 136 in the model optimization, the model is able to estimate reasonable discharge and soil moisture, although relatively less accurately and with less precision than for the entire dataset. In summary, this study shows that, for poorly gauged tropical basins, the joint calibration of SMOS soil moisture and a few in situ discharge gauges is capable of providing reasonable discharge and soil moisture estimates basin-wide and is more preferable than performing only a discharge-oriented optimization process.

Soil moisture observations are of broad scientific interest and practical value for a wide range of applications. The scientific community has made significant progress in estimating soil moisture from satellite-based Earth observation data, particularly in operationalizing coarse-resolution (25-50 km) soil moisture products. This review summarizes existing applications of satellite-derived soil moisture products and identifies gaps between the characteristics of currently available soil moisture products and the application requirements from various disciplines. We discuss the efforts devoted to the generation of high-resolution soil moisture products from satellite Synthetic Aperture Radar (SAR) data such as Sentinel-1 C-band backscatter observations and/or through downscaling of existing coarse-resolution microwave soil moisture products. Open issues and future opportunities of satellite-derived soil moisture are discussed, providing guidance for further development of operational soil moisture products and bridging the gap between the soil moisture user and supplier communities.

Numerous Surface Soil Moisture (SSM) products are available from remote sensing, encompassing different spatial, temporal, and radiometric resolutions and retrieval techniques. Notwithstanding this variety, all products should be coherent with water inputs. In this work, we have cross-compared precipitation and irrigation with different SSM products: Soil Moisture Ocean Salinity (SMOS), Soil Moisture Active Passive (SMAP), European Space Agency (ESA) Climate Change Initiative (ESA-CCI) products, Copernicus SSM1km, and Advanced Microwave Scanning Radiometer 2 (AMSR2). The products have been analyzed over two agricultural sites in Italy (Chiese and Capitanata Irrigation Consortia). A Hydrological Consistency Index (HCI) is proposed as a means to measure the coherency between SSM and precipitation/irrigation. Any time SSM is available, a positive or negative consistency is recorded, according to the rainfall registered since the previous measurement and the increase/decrease of SSM. During the irrigation season, some agreements are labeled as &ldquo, irrigation-driven&rdquo, No SSM dataset stands out for a systematic hydrological coherence with the rainfall. Negative consistencies cluster just below 50% in the non-irrigation period and lose 20&ndash, 30% in the irrigation period. Hybrid datasets perform better (+15&ndash, 20%) than single-technology measurements, among which active data provide slightly better results (+5&ndash, 10%) than passive data.

Satellite precipitation products have been largely improved in the recent years particularly with the launch of the global precipitation measurement (GPM) core satellite. Moreover, the development of techniques for exploiting the information provided by satellite soil moisture to complement/enhance precipitation products have improved the accuracy of accumulated rainfall estimates over land. Such satellite enhanced precipitation products, available with a short latency (

International audience; This paper presents a community effort to develop good practice guidelines for the validation of global coarse-scale satellite soil moisture products. We provide theoretical background, a review of state-of-the-art methodologies for estimating errors in soil moisture data sets, practical recommendations on data pre-processing and presentation of statistical results, and a recommended validation protocol that is supplemented with an example validation exercise focused on microwave-based surface soil moisture products. We conclude by identifying research gaps that should be addressed in the near future.

Rain gauges are unevenly spaced around the world with extremely low gauge density over developing countries. For instance, in some regions in Africa the gauge density is often less than one station per 10 000 km2. The availability of rainfall data provided by gauges is also not always guaranteed in near real time or with a timeliness suited for agricultural and water resource management applications, as gauges are also subject to malfunctions and regulations imposed by national authorities. A potential alternative is satellite-based rainfall estimates, yet comparisons with in situ data suggest they are often not optimal. In this study, we developed a short-latency (i.e. 2–3 d) rainfall product derived from the combination of the Integrated Multi-Satellite Retrievals for GPM (Global Precipitation Measurement) Early Run (IMERG-ER) with multiple-satellite soil-moisture-based rainfall products derived from ASCAT (Advanced Scatterometer), SMOS (Soil Moisture and Ocean Salinity) and SMAP (Soil Moisture Active and Passive) L3 (Level 3) satellite soil moisture (SM) retrievals. We tested the performance of this product over four regions characterized by high-quality ground-based rainfall datasets (India, the conterminous United States, Australia and Europe) and over data-scarce regions in Africa and South America by using triple-collocation (TC) analysis. We found that the integration of satellite SM observations with in situ rainfall observations is very beneficial with improvements of IMERG-ER up to 20 % and 40 % in terms of correlation and error, respectively, and a generalized enhancement in terms of categorical scores with the integrated product often outperforming reanalysis and ground-based long-latency datasets. We also found a relevant overestimation of the rainfall variability of GPM-based products (up to twice the reference value), which was significantly reduced after the integration with satellite soil-moisture-based rainfall estimates. Given the importance of a reliable and readily available rainfall product for water resource management and agricultural applications over data-scarce regions, the developed product can provide a valuable and unique source of rainfall information for these regions.

Predicting the course of an epidemic is difficult, predicting the course of a pandemic from an emerging virus even more so. The validity of most predictive models relies on numerous parameters, involving biological and social characteristics often unknown or highly uncertain. COVID-19 pandemic brings additional factors such as population density and movements, behaviours, quality of the health system. Data from the COVID-19 epidemics in China, Japan and South Korea were used to build up data-driven deterministic models. Epidemics occurring in selected European countries rapidly evolved to overtake most Chinese provinces, to overtake South Korean model for France and even Hubei in the case of Italy and Spain. This approach was applied to other European countries and provides relevant information to inform disease control decision-making.

While predicting the course of an epidemic is difficult, predicting the course of a pandemic from an emerging virus is even more so. The validity of most predictive models relies on numerous parameters, involving biological and social characteristics often unknown or highly uncertain. Data of the COVID-19 epidemics in China, Japan, South Korea and Italy were used to build up deterministic models without strong assumptions. These models were then applied to other countries to identify the closest scenarios in order to foresee their coming behaviour. The models enabled to predict situations that were confirmed little by little, proving that these tools can be efficient and useful for decision making in a quickly evolving operational context.

This paper investigated the sensitivity of passive microwave L-band soil moisture (SM) retrieval from multiangle airborne brightness temperature data obtained under morning and afternoon conditions from the National Airborne Field Experiment conducted in southeast Australia in 2006. Ground measurements at a dryland focus farm including soil texture, soil temperature, and vegetation water content were used as ancillary data to drive the retrieval model. The derived SM was then in turn evaluated with the ground-measured near-surface SM patterns. The results of this paper show that the Soil Moisture and Ocean Salinity target accuracy of 0.04 $\text{m}^{3}\cdot \text{m}^{-3}$ for single-SM retrievals is achievable irrespective of the 6 A.M. and 6 P.M. overpass acquisition times for moisture conditions $\le 0.15~\text{m}^{3}\cdot \text{m}^{-3}$ . Additional tests on the use of the air temperature as proxy for the vegetation temperature also showed no preference for the acquisition time. The performance of multiparameter retrievals of SM and an additional parameter proved to be satisfactory for SM modeling—independent of the acquisition time—with root-mean-square errors less than 0.06 $\text{m}^{3}\cdot \text{m}^{-3}$ for the focus farm.

Long-term climate records of soil moisture are of increased importance to climate researchers. In this study, we aim to evaluate the quality of three different fusion approaches that combine soil moisture retrieval from multiple satellite sensors. The arrival of L-band missions has led to an increased focus on the integration of L-band-based soil moisture retrievals in climate records, emphasizing the need to improve our understanding based on its added value within a multi-sensor framework. The three evaluated approaches were developed on 10-year passive microwave data (2003-2013) from two different satellite sensors, i.e., SMOS (2010-2013) and AMSR-E (2003-2011), and are based on a neural network (NN), regressions (REG), and the Land Parameter Retrieval Model (LPRM). The ability of the different approaches to best match AMSR-E and SMOS in their overlapping period was tested using an inter-comparison exercise between the SMOS and AMSR-E datasets, while the skill of the individual soil moisture products, based on anomalies, was evaluated using two verification techniques; first, a data assimilation technique that links precipitation information to the quality of soil moisture (expressed as the Rvalue), and secondly the triple collocation analysis (TCA). ASCAT soil moisture was included in the skill evaluation, representing the active microwave-based counterpart of soil moisture retrievals. Besides a semi-global analysis, explicit focus was placed on two regions that have strong land-atmosphere coupling, the Sahel (SA) and the central Great Plains (CGP) of North America. The NN approach gives the highest correlation coefficient between SMOS and AMSR-E, closely followed by LPRM and REG, while the absolute error is approximately the same for all three approaches. The Rvalue and TCA show the strength of using different satellite sources and the impact of different merging approaches on the skill to correctly capture soil moisture anomalies. The highest performance is found for AMSR-E over sparse vegetation, for SMOS over moderate vegetation, and for ASCAT over dense vegetation cover. While the two SMOS datasets (L3 and LPRM) show a similar performance, the three AMSR-E datasets do not. The good performance for AMSR-E over spare vegetation is mainly perceived for AMSR-E LPRM, benefiting from the physically based model, while AMSR-E NN shows improved skill in densely vegetated areas, making optimal use of the SMOS L3 training dataset. AMSR-E REG has a reasonable performance over sparsely vegetated areas; however, it quickly loses skill with increasing vegetation density. The findings over the SA and CGP mainly reflect results that are found in earlier sections. This confirms that historical soil moisture datasets based on a combination of these sources are a valuable source of information for climate research.

ElectroMagnetic (EM) reasons resulting in temperature dependence of L-band Vegetation Optical Depth (L-VOD) are currently overlooked in remote sensing products. Discrepancies in retrievals of geophysical surface properties over vegetated areas can result from this incompleteness. This perception motivated to explore EM considerations in how temperature drives L-VOD of a boreal forest. Thereto, a novel physics-based model is developed and evaluated to assess L-VOD sensitivities to canopy temperature and some other model parameters. The L-VOD model is compared to L-VOD derived from close-range L-band brightness temperatures measured through the tree canopy at the Finnish Meteorological Institute's Arctic Research Center (FMI-ARC) in Sodankyla (Finland) during a 4-week and a 1-day period in 2019. Furthermore, the model's ability to explain L-VOD retrieved from brightness temperatures of the “Soil Moisture and Ocean Salinity” (SMOS) satellite over the “Sodankyla grid cell” is investigated. Experimental L-VOD are maximal at around 0 °C and decrease when canopy temperature is moving away from zero degree Celsius. This temperature response, observed at different temporal- and spatial scales, is captured by the proposed L-VOD model and explained by freezing tree sap-water and the dependence of water permittivity on temperature. The demonstrated EM-induced temperature dependence suggest caution with interpreting satellite-based L-VOD, because increased L-VOD around the freezing point is not solely due to increased biomass or rehydration of the vegetation. Further, our study can find future application to compensate L-VOD for EM-induced temperature sensitivity. This potentially leads to improved explanatory power of temperature normalized L-VOD for characterization of forest phenology. Furthermore, we suggest examining the presence and strength of the demonstrated L-VOD temperature response as a practical L-VOD retrieval quality assessment method under steady forest phenology.

The basic observables of an imaging interferometer by aperture synthesis are the complex visibilities. Under some conditions, they can be simulated with the aid of the van Cittert–Zernike theorem. However, owing to underlying assumptions, some important effects that may alter them cannot be taken into account. This paper is devoted to the numerical simulation of complex visibilities without any reference to the van Cittert–Zernike theorem, in such a way that these effects can be taken into account. The emission from an extended source is modeled using a linear superposition of random waves emitted by a collection of point sources, which are all assumed to behave like black bodies at thermal equilibrium. These random waves are numerically generated with the aid of white noises filtered in such a way that their power spectral densities follow the shape of Planck distributions at the temperature of the point sources over a wide range of frequencies. The radio signal is then transported to the antennas, where the voltage patterns are taken into account as well as the filters response of the bandpass receivers. It is, therefore, sent to the correlator unit for being cross-correlated. From emission to correlation, perturbing effects can be introduced at any time. To illustrate this modeling method, numerical simulations are carried out in the L-band around 1413.5 MHz in reference to the SMOS- next project led by the French Space Agency. The results are discussed and compared with the estimates provided by the van Cittert–Zernike theorem. Owing to the amount of calculations to be performed, massive parallel architectures like that found in GPU have been required.

Measurements of the surface soil moisture (SM) content are important for a wide range of applications. Among them, operational hydrology and numerical weather prediction, for instance, need SM information in near-real-time (NRT), typically not later than 3 h after sensing. The European Space Agency (ESA) Soil Moisture and Ocean Salinity (SMOS) satellite is the first mission specifically designed to measure SM from space. The ESA Level 2 SM retrieval algorithm is based on a detailed geophysical modelling and cannot provide SM in NRT. This paper presents the new ESA SMOS NRT SM product. It uses a neural network (NN) to provide SM in NRT. The NN inputs are SMOS brightness temperatures for horizontal and vertical polarizations and incidence angles from 30 to 45°. In addition, the NN uses surface soil temperature from the European Centre for Medium-Range Weather Forecasts (ECMWF) Integrated Forecast System (IFS). The NN was trained on SMOS Level 2 (L2) SM. The swath of the NRT SM retrieval is somewhat narrower (∼ 915 km) than that of the L2 SM dataset (∼ 1150 km), which implies a slightly lower revisit time. The new SMOS NRT SM product was compared to the SMOS Level 2 SM product. The NRT SM data show a standard deviation of the difference with respect to the L2 data of 3 m−3 in most of the Earth and a Pearson correlation coefficient higher than 0.7 in large regions of the globe. The NRT SM dataset does not show a global bias with respect to the L2 dataset but can show local biases of up to 0.05 m3 m−3 in absolute value. The two SMOS SM products were evaluated against in situ measurements of SM from more than 120 sites of the SCAN (Soil Climate Analysis Network) and the USCRN (US Climate Reference Network) networks in North America. The NRT dataset obtains similar but slightly better results than the L2 data. In summary, the NN SMOS NRT SM product exhibits performances similar to those of the Level 2 SM product but it has the advantage of being available in less than 3.5 h after sensing, complying with NRT requirements. The new product is processed at ECMWF and it is distributed by ESA and via the European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT) multicast service (EUMETCast).

The European Space Agency's Soil Moisture and Ocean Salinity (SMOS) mission is devoted to the monitoring of soil moisture and ocean salinity at a global scale from L -band space-borne radiometric observations obtained with a two-dimensional interferometer. SMOS was launched in November 2, 2009, and is still collecting the interferometric data used to retrieve the brightness temperature of the Earth surface. Several external sources of brightness within the field of view of SMOS contaminate these measurements and their contributions should be removed prior to image reconstruction. One of these sources is the direct solar radiations when the sun is either below the antenna plane array (i.e., in front of the satellite) and seen by the front-lobes antenna patterns or above it (i.e., in the back of the satellite) and seen by the back-lobes antenna patterns. In the case of SMOS, the direct solar radiations are accounted for only when the sun is in front of the satellite. In the second case, their impact is considered negligible. In this paper, we will show evidence of non-negligible direct solar radiations in the retrieved temperatures when the sun is in the back of SMOS. We will also show that the sun correction algorithm implemented in the SMOS level 1 operational processor can be extended efficiently to remove such radiations.

Two satellites are currently monitoring surface soil moisture (SM) using L-band observations: SMOS (Soil Moisture and Ocean Salinity), a joint ESA (European Space Agency), CNES (Centre national d’études spatiales), and CDTI (the Spanish government agency with responsibility for space) satellite launched on November 2, 2009 and SMAP (Soil Moisture Active Passive), a National Aeronautics and Space Administration (NASA) satellite successfully launched in January 2015. In this study, we used a multilinear regression approach to retrieve SM from SMAP data to create a global dataset of SM, which is consistent with SM data retrieved from SMOS. This was achieved by calibrating coefficients of the regression model using the CATDS (Centre Aval de Traitement des Données) SMOS Level 3 SM and the horizontally and vertically polarized brightness temperatures (TB) at 40° incidence angle, over the 2013 – 2014 period. Next, this model was applied to SMAP L3 TB data from Apr 2015 to Jul 2016. The retrieved SM from SMAP (referred to here as SMAP_Reg) was compared to: (i) the operational SMAP L3 SM (SMAP_SCA), retrieved using the baseline Single Channel retrieval Algorithm (SCA); and (ii) the operational SMOSL3 SM, derived from the multiangular inversion of the L-MEB model (L-MEB algorithm) (SMOSL3). This inter-comparison was made against in situ soil moisture measurements from more than 400 sites spread over the globe, which are used here as a reference soil moisture dataset. The in situ observations were obtained from the International Soil Moisture Network (ISMN; https://ismn.geo.tuwien.ac.at/) in North of America (PBO_H2O, SCAN, SNOTEL, iRON, and USCRN), in Australia (Oznet), Africa (DAHRA), and in Europe (REMEDHUS, SMOSMANIA, FMI, and RSMN). The agreement was analyzed in terms of four classical statistical criteria: Root Mean Squared Error (RMSE), Bias, Unbiased RMSE (UnbRMSE), and correlation coefficient (R). Results of the comparison of these various products with in situ observations show that the performance of both SMAP products i.e. SMAP_SCA and SMAP_Reg is similar and marginally better to that of the SMOSL3 product particularly over the PBO_H2O, SCAN, and USCRN sites. However, SMOSL3 SM was closer to the in situ observations over the DAHRA and Oznet sites. We found that the correlation between all three datasets and in situ measurements is best (R > 0.80) over the Oznet sites and worst (R = 0.58) over the SNOTEL sites for SMAP_SCA and over the DAHRA and SMOSMANIA sites (R= 0.51 and R= 0.45 for SMAP_Reg and SMOSL3, respectively). The Bias values showed that all products are generally dry, except over RSMN, DAHRA, and Oznet (and FMI for SMAP_SCA). Finally, our analysis provided interesting insights that can be useful to improve the consistency between SMAP and SMOS datasets.

Melt occurrence in Antarctica is derived from L-band observations from the Soil Moisture and Ocean Salinity (SMOS) satellite between the austral summer 2010/11 and 2017/18. The detection algorithm is adapted from a threshold method previously developed for 19 GHz passive microwave measurements from Special Sensor Microwave Imagers (SSM/I, SSMIS). The comparison of daily melt occurrence retrieved from 1.4 GHz and 19 GHz observations shows an overall close agreement, but a lag of few days is usually observed by SMOS at the beginning of the melt season. To understand the difference, we performed a theoretical analysis using a microwave emission radiative transfer model that shows that the sensitivity of 1.4 GHz signal to liquid water is significantly weaker than at 19 GHz if the water is only present in the uppermost tens of centimeters of the snowpack. Conversely, 1.4 GHz measurements are sensitive to water when spread over at least 1 m and when present at depth, up to hundreds of meters. This is explained by the large penetration depth in dry snow and by the long wavelength (21 cm). We conclude that SMOS and higher frequency radiometers provide interesting complementary information on melt occurrence and on the location of the water in the snowpack.