Search

In this paper, polyimide-graphite (PG) composite was prepared and used as a solid lubricant at elevated temperatures. PG composite was characterized by X-ray diffraction, and its thermal stability was evaluated based on thermogravimetric/differential thermal analysis and Fourier transform infrared spectrometry analysis. The results show that in PG composite, there was some interaction between the graphite (GR) and the polyimide (PI) matrix. Consequently, the PG composite exhibited better thermal stability than PI. The friction behavior of the PG composite sliding against steel at elevated temperatures (300–600°C at an interval of 100°C) was evaluated with a ring-on-ring tribometer. It was found that the PG composite exhibited excellent friction-reducing ability and good load-carrying capacity in the temperature range of 300–600°C and applied loads of 300–700 N. Moreover, this excellent lubricating performance of the PG composite might be attributed to its good thermal stability as a result of the interaction between the GR and the PI matrix. Therefore, PG composite could be used as an excellent solid lubricant under the high-temperature conditions.

Nano zero-valent iron (NZVI) particles were prone to forming aggregates owing to their intrinsic magnetism and van der Waals force. In this work, a composite material containing mesoporous silica MCM-41 and NZVI was prepared to avoid the problem of NZVI aggregation. The structures and morphologies of the as-prepared composite were confirmed using X-ray diffraction, Fourier transform infrared spectrometry, transmission electron microscopy, N2adsorption–desorption, and X-ray photoelectron spectroscopy techniques. It was found that NZVI particles were well dispersed in the composite, although the size of NZVI particle was larger than that of bare NZVI. Moreover, the composite was used as adsorbent for removing Pb(II) from aqueous solution at room temperature. The effects of contact time, initial solution pH, and adsorbent dosage on the removal efficiency of Pb(II) were studied using batch adsorption experiments. The results indicated the composite exhibited enhanced adsorption properties, with the maximum adsorption capacity of 416.17 mg/g for Pb(II) removal from aqueous solution. In addition, the adsorption isotherms and adsorption kinetics were also investigated systematically, it was found that the isothermal data were well fitted to Langmuir model, and the kinetic data were well suitable to pseudo-second-order kinetics model. [ABSTRACT FROM PUBLISHER]

In this study, a series of chitosan-stabilized nano zero-valent iron (CNZVI) composites with different amounts of chitosan were prepared and characterized by Fourier transform infrared spectra, X-ray diffraction, and transmission electron microscopy. The adsorption capacity of these composites was evaluated by the removal experiment of cadmium ion (Cd2+) from aqueous solution. These results showed that the as-prepared CNZVI8composite with loose aggregate structure has the maximum adsorption capacity for Cd2+. Furthermore, batch adsorption experiments of Cd2+on CNZVI8composite were performed under various conditions, such as contact time, adsorbent dosage, initial Cd2+concentration, and the initial pH of solution. The data revealed that the maximum adsorption capacity of CNZVI8is 124.74 mg/g. The removal efficiency of Cd2+increased with the increase in solution pH value, and reaches 99.9% at pH 6. In addition, the adsorption isotherm and the adsorption kinetics of Cd2+on CNZVI8were also investigated, suggesting that the isothermal data were well fitted to the Langmuir model and the kinetic data were well suitable to the pseudo-second-order kinetic model. [ABSTRACT FROM PUBLISHER]