Search

This article has a correction concerning the authors: We regret that there is an error with the author list in our original article. The authors Jussi Helminen, Paulus Hyväri, and Ilkka Kilpeläinen, all with the Department of Chemistry, University of Helsinki, P.O. Box 55, FI-00014 Helsinki, Finland, were mistakenly omitted. The author list should be as shown above in this Addition and Correction. DOI 10.1021/acssuschemeng.0c07773 Ioncell is a Lyocell based technology for the production of manmade cellulose fibers. This technology exploits the intrinsic dissolution power of superbase-based ionic liquids (ILs) toward cellulose and the ability to form spinnable cellulose solutions. The regenerated fibers are produced via a dry-jet wet spinning process in which the cellulose filaments are stretched in an air gap before regenerating in an aqueous coagulation medium. For the commercialization of this process, it is essential to demonstrate the quantitative recovery of the solvent from the coagulation bath without impairing its solvation power. This study reports on the spinnability and recyclability of the IL 7-methyl-1,5,7-triazabicyclo[4.4.0]dec-5-enium acetate ([mTBDH][OAc]) over five cycles in comparison to 1,5-diaza-bicyclo[4.3.0]non-5-enium acetate ([DBNH][OAc]). The aqueous IL solutions were recovered from the coagulation bath by successive thermal treatments under reduced pressure. Accordingly, the recycled ILs were utilized to dissolve 13 wt % cellulose pulp in each cycle without the addition of make-up IL. While using [mTBDH][OAc], the pulp was completely dissolved and processed into easily spinnable cellulose solutions during all five cycles, whereas the ability to dissolve pulp was completely lost after the first recovery cycle when using [DBNH][OAc]. The composition of the recovered ILs and extent of side-products generated in the adopted process was analyzed in detail. This includes characterization of the rheological properties of the solutions as well as the macromolecular and mechanical properties of the regenerated fibers. In addition, we review the toxicity of both solvents using Vibrio fischeri bacteria. Finally, the spun fibers from all [mTBDH][OAc] spinning trials were combined to produce a demonstration dress (Paju), designed and sewn by Marimekko Design House in Finland.

Ionic liquids are used to dewater a suspension of birch Kraft pulp cellulose nanofibrils (CNF) and as a medium for water-free topochemical modification of the nanocellulose (a process denoted as “WtF-Nano”). Acetylation was applied as a model reaction to investigate the degree of modification and scope of effective ionic liquid structures. Little difference in reactivity was observed when water was removed, after introduction of an ionic liquid or molecular co-solvent. However, the viscoelastic properties of the CNF suspended in two ionic liquids show that the more basic, but non-dissolving ionic liquid, allows for better solvation of the CNF. Vibrio fischeri bacterial tests show that all ionic liquids in this study were harmless. Scanning electron microscopy and wide-angle X-ray scattering on regenerated samples show that the acetylated CNF is still in a fibrillar form. 1 D and 2 D NMR analyses, after direct dissolution in a novel ionic liquid electrolyte solution, indicate that both cellulose and residual xylan on the surface of the nanofibrils reacts to give acetate esters.