Search

Aluminum, due to its high abundance, very attractive theoretical capacity, low cost, low (de−) lithiation potential, light weight, and effective suppression of dendrite growth, is considered as a promising anode candidate for lithium‐ion batteries (LIBs). However, its practical application is hindered due to multiple detrimental challenges, including the formation of an amorphous surface oxide layer, pulverization, and insufficient lithium diffusion kinetics in the α‐phase. These outstanding intrinsic challenges need to be addressed to facilitate the commercial production of Al‐based batteries. The native passivation layer, Al2O3, plays a critical role in the nucleation and reversibility of lithiating aluminum and is thoroughly investigated in this study using high precision electrochemical micro calorimetry. The enthalpy of crystallization of β‐LiAl is found to be 40.5 kJ mol−1, which is in a strong agreement with the value obtained by calculation using Nernst equation (40.04 kJ mol−1). Surface treatment of the active material by the addition of 25 nm of alumina increases the nucleation energy barrier by 83 % over the native oxide layer. After the initial nucleation, the added alumina does not negatively impact the reversibility at 0.1 C rate, suggesting the removal of alumina is not necessary for improving the cyclability of aluminum anode based lithium‐ion batteries. Moreover, the coulombic efficiencies are also found to be slightly higher in the alumina treated samples compared to the untreated ones. [ABSTRACT FROM AUTHOR]

Two ground-based timber harvesting methods have been commonly used for beetle-kill salvage treatments after a bark beetle epidemic in northern Colorado. A "lop and scatter" method uses a mobilized stroke delimber to delimb and buck trees at the stump, leaving tree tops and limbs on the forest floor, while a whole-tree harvesting method brings the entire tree to the landing where it is delimbed and bucked, and thus produces logging residue piles at the landing as a byproduct. We conducted a detailed comparative time study of the two harvesting methods to develop productivity and cost models and compared the performance of the two methods under various site conditions. We applied the productivity and cost models to lodgepole pine forest stands totaling 3400 hectares of the Colorado State Forest State Park to estimate salvage harvesting costs for each forest stand and identify the least costly harvesting options. The results show that the estimated stump-to-truck timber production costs were $30.00 per oven dry ton (odt) for lop and scatter and $23.88 odt-1 for the whole-tree method in our study harvest unit. At the forest level, the estimated average stump-to-truck costs were $54.67 odt-1 and $56.95 odt-1 for lop and scatter and whole-tree harvesting, respectively. Skidding distance and downed trees affect the harvesting costs of both methods, but their influence appears to be more significant on the whole-tree method. [ABSTRACT FROM AUTHOR]