Search

Attempts to improve solar cells efficiency touch all its constituents and are directly related to their fabrication protocols. While the most promising material platform for high efficiency photovoltaic devices is still III-V semiconductors, introduction of novel materials like single-walled carbon nanotubes (SWCNTs), which are characterized by unique combination of conductivity and transparency, might greatly yield the device performance. Here, for the first time, we present the results of the fabrication and characterization of a thin-film GaAs solar cell with a SWCNT top contact. We examine the contact between the SWCNT film and the semiconductor structure by means of the optical and electron beam-induced current techniques. The fabricated device demonstrates better performance, that is, increased power conversion efficiency from 10.6% to 11.5% when compared to the cell with the traditional metal contact grid, stemming from the enhanced photocurrent collection efficiency and low parasitic light absorption in the emitter layer. We envision future prospects to exploit the multifunctionality of the SWCNTs in fabrication of highly efficient photovoltaic devices including flexible solar cells.

Rubber materials are the key components of flexible optoelectronic devices, especially for the light-emitting diodes based on arrays of inorganic nanowires (NWs). This paper reports on polydimethylsiloxane-graft-polystyrene (PDMS-St) as a new flexible substrate of GaP NW array structures. The NWs were encapsulated by the newly introduced G-coating method to substitute the inefficient mainstream spin-coating. To further exploit the flexibility and the stretchability of the NW/PDMS-St structures, the ferrocenyl-containing polymethylhydrosiloxane was synthesized and successfully used as an electrode for the NWs. In order to make an alternative highly efficient transparent electrode, a new application of conductive single-walled carbon nanotubes was demonstrated. The novel materials and methods demonstrated unsurpassed mechanical stability of the fabricated flexible electronic devices.

We report on single photon emitters for the green-yellow spectral range, which comprise a CdSe/ZnSe quantum dot placed inside a semiconductor tapered nanocolumn acting as a multimode nanoantenna. Despite the presence of many optical modes inside, such a nanoantenna is able to collect the quantum dot radiation and ensure its effective output. We demonstrate periodic arrays of such emitters, which are fabricated by focused ion beam etching from a II-VI/III-V heterostructure grown using molecular beam epitaxy. With non-resonant optical pumping, the average count rate of emitted single photons exceeds 5 MHz with the second-order correlation function g(2)(0) = 0.25 at 220 K. Such single photon emitters are promising for secure free space optical communication lines.

Fullerenol C60(OH)22–24 was incorporated into the polyamide (PA) selective layer to develop novel thin film nanocomposite (TFN) hollow fiber membranes for low molecular weight cut-off ultrafiltration. TFN membranes were fabricated via interfacial polymerization technique by alternately pumping fullerenol dispersion in triethylenetetramine (TETA) aqueous solution and isophthaloyl chloride solution in hexane through polysulfone hollow fiber membranes. Developed TFN PA/fullerenol membranes were investigated by FTIR, Raman spectroscopy, SEM, TEM, AFM, contact angle measurements and evaluated by determining the permeability, rejection and antifouling performance. Introduction of fullerenol to the PA skin layer was revealed to yield in the decrease of pure water flux and slight increase of lysozyme rejection which is attributed to the increase of the thickness of PA layer. Water contact angle of the skin layer was found to decrease sharply from 34° to 21° when the concentration of fullerenol increased up to 0.5 wt% in the TETA aqueous solution. Antifouling properties of the PA/fullerenol membranes were found to be superior to initial membrane. Fouling recovery ratio increased from 54% for the pristine membrane to 93% for the membrane with 0.5 wt% of fullerenol in the TETA aqueous solution. Irreversible fouling ratio was found to decrease from 38% to 6%, respectively. A correlation between surface properties and fouling behavior of TFN membranes upon increase of fullerenol concentration was established.

A comprehensive picture of the nanosecond-laser generation of colloidal nanoparticles in liquids is nowadays the demand of their high-throughput industrial fabrication for diverse perspective biomedical, material science, and optoelectronic applications. In this study, using silicon as an example, we present a self-consistent experimental visualization and theoretical description of key transient stages during nanosecond-laser generation of colloidal nanoparticles in liquids: plasma-mediated injection of ablated mass into the liquid and driving the vapor bubble, finalized by the colloid appearance in the liquid. The explored fundamental transient stages envision the basic temporal and spatial scales, as well as laser parameter windows, for the demanded high-throughput nanosecond-laser generation of colloidal nanoparticles in liquids.

Novel dense and supported (polyacrylonitrile substrate) mixed matrix membranes based on biopolymer sodium alginate (SA), modified by Zr-MOFs were developed to improve pervaporation dehydration properties of a parent SA membrane. The following Zr-MOFs were synthesized and tested as modifiers: unmodified UiO-66 and modified UiO-66(NH2)-AcOH and UiO-66(NH2)-EDTA. Two kinds of mixed matrix membranes were developed: without additional treatment and cross-linked with calcium chloride. The synthesized Zr-MOFs nanoparticles and developed SA and SA-Zr-MOFs membranes were studied using Fourier-transform infrared spectroscopy, nuclear magnetic resonance, scanning electron microscopy, surface area measurement, atomic force microscopy, X-ray diffraction analysis, thermogravimetric analysis, and swelling experiments. Dense and supported membranes were tested for their transport properties in the pervaporation dehydration of isopropanol (12, 30 wt% water for the untreated membranes and 12–100 wt% water for the cross-linked membranes). The best transport properties (dehydration of water/isopropanol mixtures at 22 °C) were demonstrated by a supported cross-linked membrane, containing 15 wt% of UiO-66: permeation flux 0.47–3.38 kg/(m2h), water content in permeate 99.9-97.5 wt%.

Light is critical for art. It allows us to see color, and can itself be a tool for creating unique pieces of art and design. Here we demonstrate that a laser can be a multifunctional and effective tool for the creation of masterpieces, analogous to the process of an artist creating a canvas with classical paints and brushes. We investigate the interaction between focused laser irradiation and metallic surfaces and analyze the optical effects in thin oxide films for three main artistic operations: color making, multiple color changes, and erasing managed by a nanosecond laser. These processes are possible upon heating the material above the evaporation point and are proved to be dependent on the cooling rate, according to both experimental and theoretical results. Such an interference-based laser paintbrush could find applications in modern art and design.

Nanoporous iridium electrodes are prepared and electrochemically investigated towards the water oxidation (oxygen evolution) reaction. The preparation is based on ‘anodic’ aluminum oxide templates, which provide straight, cylindrical nanopores. Their walls are coated using atomic layer deposition (ALD) with a newly developed reaction which results in a metallic iridium layer. The ALD film growth is quantified by spectroscopic ellipsometry and X‐ray reflectometry. The morphology and composition of the electrodes are characterized by scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, and X‐ray diffraction. Their catalytic activity is quantified for various pore geometries by cyclic voltammetry, steady‐state electrolysis, and electrochemical impedance spectroscopy. With an optimal pore length of L≈17–20 μm, we achieve current densities of J=0.28 mA cm−2 at pH 5 and J=2.4 mA cm−2 at pH 1. This platform is particularly competitive for achieving moderate current densities at very low overpotentials, that is, for a high degree of reversibility in energy storage.

International audience; We report here the growth and functional properties of silicon-based nanowhisker (NW) diodes produced by the vapor-liquid-solid process using a pulsed laser deposition technique. For the first time, we demonstrate that this method could be employed to control the size and shape of silicon NWs by using a two-component catalyst material (Au/Cu approximate to 601). During the NW growth, copper is distributed on the outer surface of the NW, whereas gold sticks as a droplet to its top. The length of NWs is defined by the total amount of copper in the catalyst alloy droplet. The measurements of the electrical transport properties revealed that in contact with the substrate, individual NWs demonstrate typical I-V diode characteristics. Our approach can become an important new tool in the design of novel electronic components.

Numerical simulation and EBIC measurements of GaAs-based solar cells with metal grid and CNT transport layer were performed. Influence of CNT transport layer properties on lateral current distribution was analyzed. In accordance with electron beam induced current measurements it was shown that CNT demonstrates perfect transport properties leading to good charge carrier’s collection.

We report on the heterogeneous nucleation of catalyst-free InAs nanowires on Si (111) substrates by chemical beam epitaxy. We show that nanowire nucleation is enhanced by sputtering the silicon substrate with energetic particles. We argue that particle bombardment introduces lattice defects on the silicon surface that serve as preferential nucleation sites. The formation of these nucleation sites can be controlled by the sputtering parameters, allowing the control of nanowire density in a wide range. Nanowire nucleation is accompanied by unwanted parasitic islands, but by careful choice of annealing and growth temperature allows to strongly reduce the relative density of these islands and to realize samples with high nanowire yield.

Selective-area remote epitaxy (SA-REpi) is demonstrated for fabricating the mechanically releasable position-controlled ZnO microrod (MR) arrays from the donor wafer in the arrayed form. Intaglio-p...