Search

Rachel A Morrison,1,* Malgorzata J Rybak-Smith,1,* James M Thompson,2 Bénédicte Thiebaut,3 Mark A Hill,2 Helen E Townley1,4 1Department of Engineering Science, 2Gray Laboratories, CRUK/MRC Oxford Institute for Radiation Oncology, University of Oxford, Oxford, 3Johnson Matthey, Technology Centre, Reading, Berkshire, 4Nuffield Department of Obstetrics and Gynaecology, John Radcliffe Hospital, University of Oxford, Oxford, UK *These authors have contributed equally to this work Abstract: The aim of this study was to develop a manufacturing protocol for large-scale production of doped titania radiosensitizing nanoparticles (NPs) to establish their activity under hypoxia and to produce a multimodal radiosensitizing embolic particle for cancer treatment. We have previously shown that radiosensitizing NPs can be synthesized from titania doped with rare earth elements, especially gadolinium. To translate this technology to the clinic, a crucial step is to find a suitable, scalable, high-throughput method. Herein, we have described the use of flame spray pyrolysis (FSP) to generate NPs from titanium and gadolinium precursors to produce titania NPs doped with 5 at% gadolinium. The NPs were fully characterized, and their capacity to act as radiosensitizers was confirmed by clonogenic assays. The integrity of the NPs in vitro was also ascertained due to the potentially adverse effects of free gadolinium in the body. The activity of the NPs was then studied under hypoxia since this is often a barrier to effective radiotherapy. In vitro radiosensitization experiments were performed with both the hypoxia mimetics deferoxamine and cobalt chloride and also under true hypoxia (oxygen concentration of 0.2%). It was shown that the radiosensitizing NPs were able to cause a significant increase in cell death even after irradiation under hypoxic conditions such as those found in tumors. Subsequently, the synthesized NPs were used to modify polystyrene embolization microparticles. The NPs were sintered to the surface of the microparticles by heating at 230°C for 15 minutes. This resulted in a good coverage of the surface and to generate embolization particles that were shown to be radiosensitizing. Such multimodal particles could therefore result in occlusion of the tumor blood vessels in conjunction with localized reactive oxygen species generation, even under hypoxic conditions such as those found in the center of tumors. Keywords: cancer, ROS, reactive oxygen species, titania, multimodal

Variation at 12 polymorphic isozyme loci was studied in the European beech on the basis of an extensive sample of 389 populations distributed throughout the species range. Special emphasis was given to the analysis of the pattern of geographic variation on the basis of two contrasting measures of genetic diversity, gene diversity (H) and allelic richness, and to their relationship. Measures of allelic richness were corrected for variation in sample size by using the rarefaction method. As expected, maximum allelic richness was found in the southeastern part of the range (southern Italy and the Balkans), where beech was confined during the last ice age. Surprisingly, H was lower in refugia than in recently colonized regions, resulting in a negative correlation between the two diversity measures. The decrease of allelic richness and the simultaneous increase of H during postglacial recolonization was attributed to several processes that differentially affect the two diversity parameters, such as bottlenecks due to long-distance founding events, selection during population establishment, and increased gene flow at low population densities.

Amide molybdate has been recently introduced as a friction modifier for tribological applications. Combined with zinc dithiophosphate (ZDDP) and fatty amines, it provides an ultralow friction coefficient. The ultimate product of Mo compound transformations in tribological contact, due to frictional heating and shearing, as well as chemical interactions with oil additives, is molybdenum sulfide (MoS 2 ). Understanding the decomposition of amide molybdate leading to MoS 2 is of primary importance to the optimization of the design of lubricant formulations. This study focuses on the investigation by Raman spectroscopy of amide molybdate decomposition intermediates. Raman spectra of tribofilms, obtained after friction tests under different temperatures and pressures, revealed the formation of an amorphous MoS 3 intermediate coexisting with MoS 2 . However, under severe conditions, the tribofilms are mostly composed of MoS 2 ., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Recent engine design and emission trends have led to the commercial use of Atmospheric Plasma Spray (APS) coatings for cylinder liner applications like the TiO 2 APS coating. It was shown in our previous work that this type of coating showed better friction results compared to steel lubricated with MoDTC. To further investigate this feature, a parametric study was carried out involving the effect of MoDTC concentration, test temperature, Hertzian contact pressure and the change of counterpart materials from steel balls to ceramic balls (Al 2 O 3 and ZrO 2 ). Ball-on-flat tribotests were carried out on a reciprocating (ball-on-flat) tribometer lubricated with base oil containing MoDTC. Results show that for all the test conditions used including the concentration of MoDTC, test temperature and the contact pressure, lower friction and wear is observed for the TiO 2 APS coating compared to reference steel. To explain the low friction behavior, tribofilm compositions were investigated and it was observed that MoS 2 is always formed in the case of TiO 2 APS with no oxysulphide species. For the reference steel, MoO x S y species are mainly detected in the tribofilms. XPS analyses performed on TiO 2 APS flats when the counterpart material was changed from steel balls to ceramic balls suggested the formation of MoS 2 (Mo in +iv oxidation state) and Mo-C (Mo in +iv or +ii oxidation state) species with a negligible amount of MoO 3 (Mo in +vi oxidation state). It was also shown that a significant amount of molybdenum atoms inside the tribofilm, originating from MoDTC (Mo in +v oxidation state) were reduced in the tribological contact. A mechanism for the decomposition of MoDTC on the basis of tribocatalytic behaviour hypothesized in our previous work was proposed and discussed., Competing Interests: There are no conflicts of interest to declare., (This journal is © The Royal Society of Chemistry.)