Search

The work is motivated by an industrial problem, which is alcohol removal from pharmaceutical process wastewater. The aim of the study was to develop a complete hybrid operation is investigated. Ethanol dehydration, in combination with distillation and hydrophilic pervaporation, is used to investigate about the extent of separation of the ethanol-water mixture. The aim of this research is to rigorously model and optimize this hybrid operation in professional flowsheet simulator environment. The number of minimal theoretical plates of distillation column and minimal effective membrane transfer area are determined. Cost estimation is also examined according to Douglas methodology. Considering our results it can be concluded that, the distillation and hydrophilic pervaporation processes are suitable for separation ethanol and water in 99.5 weight percent purity

Chemical process design is a creative step of engineers that should be supported by different computer-aided design tools. Such tools should be simple and easy to use because process synthesis often means the investigation of a huge number of alternatives. During the design of the separation of liquid mixtures, among many others, distillation and pervaporation are usually simultaneously considered because pervaporation is frequently considered as an alternative to distillation. To easily compare the efficiencies of continuous pervaporation and flash distillation, we propose a new and simple method, the so-called membrane flash index (MFLI). The comparison is based upon vapor–liquid equilibrium data and the permeation data of a pervaporation membrane and therefore can be plotted on a common chart in the case of binary mixtures. The permeation values of organophilic and hydrophilic pervaporations can be calculated with the help of known separation factors and feed concentrations. The MFLI is dimensionless a...

Washing detergents in process wastewaters from fine chemical industry produce high Chemical Oxygen Demand (COD), which poses a serious environmental problem. Method has to be found, which follows the principles of circular economy so that the treated water can be recycled or reused. Heat pump vacuum evaporator is evaluated in order to reduce the Chemical Oxygen Demand of process wastewater with washing detergent content from initial 7500 mg O2/L to a lower value below the effluent limit , which is 1000 mg O2/L. Yield and COD rejection are determined for the evaluation of selected treatment. Experiments are investigated with LED Italia R150-v3 pilot apparatus. Different evaporation pressures were applied during measurements. It The highest removal or reduction of in the Chemical Oxygen Demand was reached certainly using the lowest possible pressure, which is 40 mbar.