Search

Technological opportunities are explored to enhance detection schemes in transmission electron microscopy (TEM) that build on the detection of single-electron scattering events across the typical spectrum of interdisciplinary applications. They range from imaging with high spatiotemporal resolution to diffraction experiments at the window to quantum mechanics, where the wave-particle dualism of single electrons is evident. At the ultimate detection limit, where isolated electrons are delivered to interact with solids, we find that the beam current dominates damage processes instead of the deposited electron charge, which can be exploited to modify electron beam-induced sample alterations. The results are explained by assuming that all electron scattering are inelastic and include phonon excitation that can hardly be distinguished from elastic electron scattering. Consequently, a coherence length and a related coherence time exist that reflect the interaction of the electron with the sample and change linearly with energy loss. Phonon excitations are of small energy (

High-throughput grain mapping with sub-nanometer spatial resolution is demonstrated using scanning nanobeam electron diffraction (also known as 4D scanning transmission electron microscopy, or 4D-STEM) combined with high-speed direct-electron detection. An electron probe size down to 0.5 nm in diameter is used and the sample investigated is a gold–palladium nanoparticle catalyst. Computational analysis of the 4D-STEM data sets is performed using a disk registration algorithm to identify the diffraction peaks followed by feature learning to map the individual grains. Two unsupervised feature learning techniques are compared: principal component analysis (PCA) and non-negative matrix factorization (NNMF). The characteristics of the PCA versus NNMF output are compared and the potential of the 4D-STEM approach for statistical analysis of grain orientations at high spatial resolution is discussed.

RuNi nanoparticles supported on a metal-organic framework (RuNi@MOF) and formed in situ from a ruthenium complex enclosed inside a nickel-based MOF act as a highly active catalyst for the Guerbet reaction of ethanol to 1-butanol, providing turnover numbers up to 725 000 Ru

Semiconductors CulnSe2 (CIS) and alloys of Cu(ln,Ga)Se2 (CIGS) are often used as the light absorbing layer in thin film photovoltaic devices. These polycrystalline materials reach good conversion efficiencies despite the presence of grain boundaries, which can degrade device performance. Grain properties such as size distribution and orientation can be characterized using electron backscatter diffraction (EBSD). The EBSD method has been used extensively to determine texture and recrystallization in metal forming processes but to a lesser extent for characterization of CIGS thin film properties. This article describes measurements of grain properties for CIGS thin films grown under different reaction conditions.

Linear octenes were produced in high (70–85%) selectivity from oligomerization of liquid 1-butene using carbon-supported cobalt oxide catalysts in a continuous flow reactor. The liquid products were characterized by two-dimensional gas chromatography–mass spectrometry. Above 95% of the oligomers were C8 olefins, with the other products primarily being branched C12 olefins. The linear octene products at a conversion of 9.77% decreased in selectivity according to 3-octene > trans-2-octene > cis-2-octene > 4-octene. Methyl-heptenes including trans/cis-5-methyl-2-heptene > trans/cis-5-methyl-3-heptene > trans-3-methyl-2-heptene (at the lowest conversion) were the other major products summing to 15.6%. The selectivity of linear octenes decreased from 84 to 78% as the conversion increased from 10% to 29%. The product distribution suggests the reaction pathway involves a head-to-head coupling of two 1-butene molecules to form internal linear octenes. Head-to-tail coupling of two 1-butene molecules or a coupling ...

Particulate bis[1-(hydroxy-κO)-2(1H)-pyridinethionato-κS2]-(T-4)-zinc (zinc pyrithione; ZPT) in the diameter range 0.5–0.7 µm is a US FDA-approved anti-dandruff active widely used in anti-dandruff shampoos. A nanoparticulate form of ZPT is expected to exhibit a higher activity, be distributed more effectively on the scalp, require less thickening agent in the shampoo formulation to ensure its stability against settling than the standard form of ZPT, and would enable clear anti-dandruff shampoo formulations. We demonstrate, for the first time, that a green, mechanochemical nanoparticle synthesis process can be used to prepare nanoparticulate ZPT from zinc chloride and sodium pyrithione monohydrate. Both a Reeves attrition mill and a Retsch MixerMill were found to be effective tools for delivering the mechanical energy needed for the conversion. The infrared spectra and X-ray powder diffraction patterns for the products correspond to those for the known desired material. Transmission electron microscopic an...

Molybdenum disulfide promoted with alkali metals is one of the most studied catalysts for the conversion of synthesis gas to alcohols. In this work, MoS2 was promoted by adding potassium precursors by physical mixing (PM) and incipient wetness impregnation (IWI) and tested in a small scale reactor. The catalysts prepared by impregnation showed poorer performance compared to the sample prepared by physical mixing of K2CO3 and MoS2. The catalysts were characterized by means of X-ray diffraction, TGA–MS, SEM–EDS, TEM and XPS. The characterization results obtained by SEM–EDS and XRD analyses do not show major differences between the catalysts studied here. In contrast, the TGA results indicated that physical mixing leads to catalysts that lose sulfur at temperatures above 330 °C and TEM images showed that randomly oriented small MoS2 crystallites are obtained from PM preparation while IWI preparation gave long MoS2 crystallites.

Extended abstract of a paper presented at Microscopy and Microanalysis 2009 in Richmond, Virginia, USA, July 26 – July 30, 2009