Search

Self-sensing ultra-high performance concrete (UHPC) features superior mechanical capacity, excellent erosion resistance, long life cycle, and broad range of stress sensing, and is expected to be a pathway towards next-generation smart cementitious composites. This study presents a novel strategy to achieve electrical percolation and elevate the piezoresistive sensing capability of UHPC through the incorporation of multiphase and multiscale functional additives including graphene (G) and carbon nanotube (CNT). The workability, compressive strength, microstructural characteristics, and alternating current (AC) impedance response are investigated. The effect of electrical percolation on the piezoresistive behaviour is studied and discussed using various ratios of G/CNT. Results indicate that as the G/CNT ratio decreases from 4:0 to 0:4, the compressive strength is reduced from 194.7 MPa to 166.3 MPa due to the certain increase in the plastic viscosity of fresh mixture and the proportion of harmful pores, although the basic requirement of 150 MPa is met. Moreover, the AC impedance response significantly moves left and the radius of high-frequency arc reduces from 72910 Ω to 1295 Ω, suggesting electrical percolation. Bounded by percolation threshold, the fractional change of resistance curves can be divided into a two-stage pattern (i.e., linear and nonlinear stages) and a three-stage mode (i.e., linear decrease, balance, and abrupt increase stages). An underlying mechanism is proposed to explain the tremendous change in piezoresistive behaviour of self-sensing UHPC, considering the tunneling-percolation theory and electromechanical coupling behaviour. Additionally, the gauge factors range from 11 to 28, which is higher than most of the existing reported values, demonstrating the great potential of using hybrid functional nano-additives in self-sensing UHPC. [ABSTRACT FROM AUTHOR]

Achieving continuous in-situ monitoring of repaired concrete structures has always been a great challenge. Ultra-high performance fibre-reinforced concrete (UHPFRC), featuring superior mechanical capacity, excellent erosion resistance, and long-life cycle, is expected to realize durable, cost-effective, and aesthetically pleasing repairs and possesses tremendous potential for intrinsic self-sensing. This paper presents the multifunctionality of UHPFRC with integrated self-sensing and repair capabilities using multi-walled carbon nanotube (MWCNT). An experimental evaluation on the bond performance and self-sensing properties, including the bond strength and failure patterns by the three-point bending, splitting tensile, and slant shear tests, electrical properties via alternating current impedance spectroscopy test, and electromechanical properties under three-point bending, was conducted through the designed composite layer between concrete substrate and UHPFRC. The microstructure of the interfacial zone was analysed to reveal the bonding mechanism. Results indicate that the addition of MWCNT improved the bond strength between concrete substrate and UHPFRC as MWCNT can enhance the adhesion and cohesion of the interfacial zone through inactive filling effect, as well as the frictional and mechanical interlocks through increased mechanical properties of repair UHPFRC. Moreover, the repair UHPFRC showed remarkable sensing capabilities for the initial cracking, deflection hardening or softening, and fibre pull-out and debonding processes of the composite layers. The optimal content of steel fibre and MWCNT in multifunctional UHPFRC should be 2 vol.% and 0.2 wt.%, respectively, considering the synergistic damage sensing and bonding properties. [ABSTRACT FROM AUTHOR]

Background and objective: Calcaneal Sanders type II or III fractures are highly disabling with significant burden. Surgical treatment modalities include open reduction and internal fixation (ORIF) techniques and a variety of minimally invasive surgical (MIS) approaches. ORIF techniques are associated with complications and traditional MIS techniques need extensive intraoperative fluoroscopic procedures. The present study aims to investigate the effects of three different minimally invasive internal fixation (MIIF) techniques used to treat Sanders type II intra-articular calcaneal fractures using finite element analyses. Methods: A 64-row spiral computed tomography scan was used to observe the calcaneus of a healthy adult. The scanning data were imported into Mimics in a DICOM format. Using a new model of a Sanders type II-B intra-articular calcaneal fracture, three minimally invasive techniques were simulated. Technique A involved fixation using an isolated minimally invasive locking plate; Technique B used a minimally invasive locking plate with one medial support screw; and Technique C simulated a screw fixation technique using four 4.0-mm screws. After simulating a 640-N load on the subtalar facet, the maximum displacement and von Mises stress of fragments and implants were recorded to evaluate the biomechanical stability of different fixation techniques using finite element analyses. Results: After stress loading, the maximum displacements of the fragments and implants were located at the sustentaculum tali and the tip of sustentaculum tali screw, respectively, in the three techniques; however, among the three techniques, Technique B had better results for displacement of both. The maximum von Mises stress on the fragments was < 56 Mpa, and stress on the implants using the three techniques was less than the yield strength, with Technique C having the least stress. Conclusion: All three techniques were successful in providing a stable fixation for Sanders type II intra-articular calcaneal fractures, while the minimally invasive calcaneal locking plate with medial support screw fixation approach exhibited greater stability, leading to improved enhancement for the facet fragment; however, screw fixation dispersed the stress more effectively than the other two techniques. [ABSTRACT FROM AUTHOR]

Background and objective: Calcaneal Sanders type II or III fractures are highly disabling with significant burden. Surgical treatment modalities include open reduction and internal fixation (ORIF) techniques and a variety of minimally invasive surgical (MIS) approaches. ORIF techniques are associated with complications and traditional MIS techniques need extensive intraoperative fluoroscopic procedures. The present study aims to investigate the effects of three different minimally invasive internal fixation (MIIF) techniques used to treat Sanders type II intra-articular calcaneal fractures using finite element analyses. Methods: A 64-row spiral computed tomography scan was used to observe the calcaneus of a healthy adult. The scanning data were imported into Mimics in a DICOM format. Using a new model of a Sanders type II-B intra-articular calcaneal fracture, three minimally invasive techniques were simulated. Technique A involved fixation using an isolated minimally invasive locking plate; Technique B used a minimally invasive locking plate with one medial support screw; and Technique C simulated a screw fixation technique using four 4.0-mm screws. After simulating a 640-N load on the subtalar facet, the maximum displacement and von Mises stress of fragments and implants were recorded to evaluate the biomechanical stability of different fixation techniques using finite element analyses. Results: After stress loading, the maximum displacements of the fragments and implants were located at the sustentaculum tali and the tip of sustentaculum tali screw, respectively, in the three techniques; however, among the three techniques, Technique B had better results for displacement of both. The maximum von Mises stress on the fragments was < 56 Mpa, and stress on the implants using the three techniques was less than the yield strength, with Technique C having the least stress. Conclusion: All three techniques were successful in providing a stable fixation for Sanders type II intra-articular calcaneal fractures, while the minimally invasive calcaneal locking plate with medial support screw fixation approach exhibited greater stability, leading to improved enhancement for the facet fragment; however, screw fixation dispersed the stress more effectively than the other two techniques. [ABSTRACT FROM AUTHOR]