Search

Abstract Background Antibacterial peptides are important components of the innate immune system, used by the host to protect itself from different types of pathogenic bacteria. Over the last few decades, the search for new drugs and drug targets has prompted an interest in these antibacterial peptides. We analyzed 486 antibacterial peptides, obtained from antimicrobial peptide database APD, in order to understand the preference of amino acid residues at specific positions in these peptides. Results It was observed that certain types of residues are preferred over others in antibacterial peptides, particularly at the N and C terminus. These observations encouraged us to develop a method for predicting antibacterial peptides in proteins from their amino acid sequence. First, the N-terminal residues were used for predicting antibacterial peptides using Artificial Neural Network (ANN), Quantitative Matrices (QM) and Support Vector Machine (SVM), which resulted in an accuracy of 83.63%, 84.78% and 87.85%, respectively. Then, the C-terminal residues were used for developing prediction methods, which resulted in an accuracy of 77.34%, 82.03% and 85.16% using ANN, QM and SVM, respectively. Finally, ANN, QM and SVM models were developed using N and C terminal residues, which achieved an accuracy of 88.17%, 90.37% and 92.11%, respectively. All the models developed in this study were evaluated using five-fold cross validation technique. These models were also tested on an independent or blind dataset. Conclusion Among antibacterial peptides, there is preference for certain residues at N and C termini, which helps to demarcate them from non-antibacterial peptides. Both the termini play a crucial role in imparting the antibacterial property to these peptides. Among the methods developed, SVM shows the best performance in predicting antibacterial peptides followed by QM and ANN, in that order. AntiBP (Antibacterial peptides) will help in discovering efficacious antibacterial peptides, which we hope will prove to be a boon to combat the dreadful antibiotic resistant bacteria. A user friendly web server has also been developed to help the biological community, which is accessible at http://www.imtech.res.in/raghava/antibp/.

The recent advances in pigeon pea genomics, including high-quality whole genome and chloroplast genome sequence information helped develop improved varieties. However, a comprehensive Cajanus proteome, including the organelle proteome, is yet to be fully mapped. The spatial delineation of pigeon pea proteins at sub-cellular levels and inter-organelle communication could offer valuable insights into its defense mechanism against various stresses. However, the major bottleneck in the proteomic study is the lack of a suitable method of protein extraction and sample preparation compatible with two-dimensional gel electrophoresis (2D-PAGE), liquid chromatography-mass spectrometry (LCMS), or matrix-assisted laser desorption ionization-time of flight (MALDi-ToF). Our study introduces two efficient methods, one for isolating total proteins and another for organelle (chloroplast) proteins from various Cajanus spp. For total protein extraction, we have optimized a protocol using phenol in combination with a reducing agent (DTT) and protease inhibitor cocktail, also washing (6-7 times) with ice-cold acetone after overnight protein precipitation of total proteins. Our modified extraction method using phenol for total leaf protein yielded approximately 2-fold more proteins than the previously reported protocols from C. cajan (3.18 ± 0.11 mg/gm) and C. scarabaeoides (2.06 ± 0.08 mg/gm). We have also optimized a protocol for plastid protein extraction, which yielded 1.33 ± 0.25 mg/10 gm plastid proteins from C. cajan and 0.88 ± 0.19 mg/10 gm plastid proteins from C. scarabaeoides. The 2D-PAGE analysis revealed 678 ± 08 reproducible total protein spots from C. cajan and 597 ± 22 protein spots from C. scarabaeoides. Similarly, we found 566 ± 10 and 486 ± 14 reproducible chloroplast protein spots in C. cajan and C. scarabaeoides, respectively. We confirmed the plastid protein fractions through immunoblot analysis using antibodies against LHCb1/LHCⅡ type Ⅰ protein. We found both methods suitable for 2D-PAGE and mass spectrometry (MS). This is the first report on developing protocols for total and chloroplastic protein extraction of Cajanus spp. suitable for advanced proteomics research., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 S. et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Melanoma is a type of skin cancer that poses significant health risks and requires early detection for effective treatment. This study proposing a novel approach that integrates a transformer-based model with hand-crafted texture features and Gray Wolf Optimization, aiming to enhance efficiency of melanoma classification. Preprocessing involves standardizing image dimensions and enhancing image quality through median filtering techniques. Texture features, including GLCM and LBP, are extracted to capture spatial patterns indicative of melanoma. The GWO algorithm is applied to select the most discriminative features. A transformer-based decoder is then employed for classification, leveraging attention mechanisms to capture contextual dependencies. The experimental validation on the HAM10000 dataset and ISIC2019 dataset showcases the effectiveness of the proposed methodology. The transformer-based model, integrated with hand-crafted texture features and guided by Gray Wolf Optimization, achieves outstanding results. The results showed that the proposed method performed well in melanoma detection tasks, achieving an accuracy and F1-score of 99.54% and 99.11% on the HAM10000 dataset, and an accuracy of 99.47%, and F1-score of 99.25% on the ISIC2019 dataset. • We use the concepts of LBP and GLCM to extract features from the skin lesion images. • The Gray Wolf Optimization (GWO) algorithm is employed for feature selection. • A decoder based on Transformers is utilized for melanoma classification., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Author(s).)

Fly ash consists of a considerable amount of hazardous elements with high mobility, posing substantial environmental risks during storage in surface impoundments and landfills. This hinders its efficient reuse in construction or material industries. To enhance the versatility of fly ash applications, a novel surface modification technique, termed SuMo, has been developed to create a hydrophobic polysulfide polymer coating on the surface of fly ash particles. The physicochemical properties of SuMo fly ash samples were examined using atomic force microscopy (AFM), environmental scanning electron microscopy (ESEM), thermal gravimetric analysis (TGA), Fourier Transform Infrared spectroscopy (FTIR), and leaching of hazardous elements was tested under practical environmental conditions (pH 4-12) based on the EPA's leaching environmental assessment framework (LEAF). The successful coating of polysulfide polymer on fly ash surface was verified through an increased percentage of C, S, and O in elemental mapping, coupled with the identification of S-O, CO, and C-H functional groups consistent with the chemical structure of polysulfide polymer. While the SuMo fly ash particles maintained their spherical shape, they exhibited increased surface roughness, robust hydrophobicity, and thermal stability up to 250 °C. Notably, owing to the coating's resilience against water leaching, the SuMo fly ash demonstrated a substantial reduction (up to 60-fold) in leachate concentrations of multiple concerning elements, including B, Be, Ba, Mn, Zn, As, Cr, Hg, etc., under various pH conditions compared to the uncoated fly ash. Furthermore, the polysulphide polymer coating effectively prevented Hg volatilization from fly ash below 163 °C. This study highlights the efficacy of the developed polysulfide polymer coating in mitigating the diffusion of hazardous elements from fly ash, thereby enhancing its potential reutilization in material, construction, and agriculture industries., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Background: The purpose of this study is to investigate the electroosmotic flow of a hybrid nanofluid (Al2O3-Cu/Blood) with gyrotactic microorganisms through a bifurcated artery with mild stenosis in both parent and daughter arteries. The flow is subjected to a uniform magnetic field, viscous dissipation, and a heat source., Methods: The governing equations undergo the non-dimensional transformation and coordinate conversion to regularize irregular boundaries, then solve the resulting system using the Crank-Nicolson method., Results: In both sections of the bifurcated artery (parent and daughter artery), the wall shear stress (WSS) profile decreases with increasing stenotic depth. Nusselt profile increases with an increase in the heat source parameter., Conclusions: The present endeavour can be beneficial for designing better biomedical devices and gaining insight into the hemodynamic flow for therapeutic applications in the biomedical sciences., Competing Interests: The authors declare no conflict of interest., (© 2024 The Author(s). Published by IMR Press.)

In this study, the computational analysis of entropy generation optimization for synthetic cilia regulated ternary hybrid Jeffery nanofluid (Ag-Au-TiO 2 /PVA) flow through a peristaltic vertical channel with swimming motile Gyrotactic microorganisms is investigated. Understanding the intricate interaction of multiple physical phenomena in biomedical applications is essential for optimizing entropy generation and advancing microfluidic systems. The characteristics of nanofluid are explored for the electroosmotic MHD fluid flow in the presence of thermophoresis and Brownian motion, viscous dissipation, Ohmic heating and chemical reaction. Using the appropriate transformations, a set of ordinary differential equations are created from the governing partial differential equations. The resulting ODEs are numerically solved using the shooting technique using BVP5C in MATLAB after applying the long-wavelength and low Reynolds number approximation. The velocity, temperature, concentration, electroosmosis, and microorganism density profiles are analyzed graphically for different emerging parameters. Graphical investigation of engineering interest quantities like heat transfer rate, mass transfer rate, skin friction coefficient, and entropy generation optimization are also presented. It is observed that the rate of mass transfer increases for increasing thermophoretic parameter, while reverse effect is noted for Brownian motion parameter, Schmidt number, and chemical reaction number. The outcomes of present study can be pertinent in studying Cilia properties of respiratory tract, reproductive system, and brain ventricles., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (© 2024 The Authors.)

Cholera is a leading cause of mortality in Nigeria. The two most significant predictors of cholera are a lack of access to clean water and poor sanitary conditions. Other factors such as natural disasters, illiteracy, and internal conflicts that drive people to seek sanctuary in refugee camps may contribute to the spread of cholera in Nigeria. The aim of this research is to develop a cholera outbreak risk prediction (CORP) model using machine learning tools and data science. In this study, we developed a CORP model using design science perspectives and machine learning to detect cholera outbreaks in Nigeria. Nonnegative matrix factorization (NMF) was used for dimensionality reduction, and synthetic minority oversampling technique (SMOTE) was used for data balancing. Outliers were detected using density-based spatial clustering of applications with noise (DBSCAN) were removed improving the overall performance of the model, and the extreme-gradient boost algorithm was used for prediction. The findings revealed that the CORP model outcomes resulted in the best accuracy of 99.62%, Matthews's correlation coefficient of 0.976, and area under the curve of 99.2%, which were improved compared with the previous findings. The developed model can be helpful to healthcare providers in predicting possible cholera outbreaks.

Background: The presence of drug-resistant Gram-negative pathogenic bacteria and Extended Spectrum β-Lactamase Producers (ESBLs) in hospital associated fomites like door handles can serve as vehicles in transmission and may be the key factor in epidemiology of ESBL producing bacterial infection not only in a hospital setting but also in the community. The aim of this study was to determine the prevalence of ESBLs and antibiotic resistance of Gram-Negative pathogenic Bacteria isolated from door-handles in two selected hospitals in Pokhara Metropolitan City, Nepal. The study was conducted in selected hospitals in Pokhara Metropolitan City, Western Nepal. A cross-sectional study design was used. The hospitals were selected randomly. A total of 100 swab samples were taken from door-handles. Isolation and identification of bacteria were done using standard microbiological procedures. An antibiotic susceptibility test, screening and confirmation of ESBLs were performed using the Clinical Laboratory Standard Institute's guidelines., Results: Out of the 100 swab samples cultured, 96 (96%) showed bacterial growth. A total of one hundred and forty isolates were isolated in this study which were further identified based on cultural, morphological and biochemical characteristics. The study also found that door handles/knobs had higher level of contamination in Outpatient Departments (OPDs), Emergency, Laboratory, General wards and Toilets, in that order as compared to Radiology Room, Staff rooms, Intensive Care Unit and Operation Theatre which were lower. The level of contamination varies depending on the traffic exposure and the environment. The most prevalent Gram-negative bacteria identified was Escherichia coli 28.85%, followed by Klebsiella spp 21.15%, Pseudomonas aeruginosa 15.38%, Proteus spp 11.54%, Enterobacter spp 9.62%, Acenetobacter spp 7.69%, Citrobacter spp 5.77%. The most effective drug of choice was Amikacin, Nitrofurantoin, Norfloxacin, Ciprofloxacin, Tetracycline and Imipenem for many Gram-negative isolates. The overall prevalence of ESBLs in this study was 27.14%. Out of total 15 Escherichia coli isolated, 11(73.3%), Klebsiella spp 9/11 (81.8%); Pseudomonas spp 7/8 (87.5%), Proteus spp 4/6 (66.6%); Enterobacter spp 3/5 (60%), Acenetobacter spp 3/4 (75%) and Citrobacter spp 1/3 (33.3%) were found to be Extended β-Lactamase Producers (ESBLs)., Conclusion: The isolation of of pathogenic Gram-negative bacteria and ESBLs in hospital environments and subsequent detection of high drug resistance patterns indicates a potentially serious public health challenge that strengthens the need for the effective and routine cleaning of door-handles in hospitals., (© 2023. The Author(s).)

Introduction: Hypovitaminosis D is a global public health problem affecting approximately one billion people, with a particularly high prevalence in South Asia. Several hospital-based studies from Nepal show a high prevalence of hypovitaminosis D. However, large-scale community-based studies are lacking. The aim of the study was to find out the prevalence of hypovitaminosis D among blood samples of patients presenting to the Department of Biochemistry of a tertiary care centre., Methods: A descriptive cross-sectional study was conducted among blood samples of patients presenting to the Department of Biochemistry of a tertiary care centre from 3 November 2022 to 30 April 2023 after obtaining ethical approval from the Institutional Review Committee (Reference number: 136/22). Patients of all age groups and genders who were sent for the evaluation of Vitamin D at the laboratory were included. A convenience sampling technique was used. The point estimate was calculated at a 95% Confidence Interval., Results: Out of 376 patients, hypovitaminosis was seen in 274 (72.87%) (68.38-77.36, 95% Confidence Interval). Vitamin D insufficiency was present in 252 (91.97%) and vitamin D deficiency was present in 22 (8.03%) participants., Conclusions: The prevalence of hypovitaminosis D was found to be higher than other studies done in similar settings., Keywords: prevalence; vitamin D; vitamin D deficiency.

Background: In the last two years, due to the impact of COVID-19, students were forced to continue their education online because the government imposed restrictions to limit the spread of the virus. However, with the resumption of offline classes, the students seem to be suffering more from stress and isolation as they must face the challenges of the real world, which are quite different from the virtual one to which they have become accustomed. In this study, the effect of stress on students leading to their academic burnout and the influence of burnout on their learning satisfaction was studied., Materials and Methods: The data were collected from 343 students of final year postgraduation courses in business management studies in India. The collected data were subject to analysis using PLS-SEM through SmartPLS 4.0 software., Result: The results of the study state that the perceived stress significantly increases cynicism, and exhaustion with a coefficient value of 0.481 each and decreases self-efficacy with - 0.03. Additionally, exhaustion acts as a mediator that decreases the effect of perceived stress over learning satisfaction with a positive indirect effect of 0.176., Conclusion: The study concludes that not all types of stress are bad for students; hence, increasing perceived stress leads to increased learning satisfaction. Whereas, in the presence of burnout factors, such as exhaustion and cynicism, learning satisfaction decrease. However, self-inefficacy, one of the factors under burnout, doesn't show any effect on learning satisfaction. The present study is widely applicable to industry and academia to deal with burnout to improve students learning satisfaction., Competing Interests: There are no conflicts of interest., (Copyright: © 2023 Journal of Education and Health Promotion.)

Mycotoxin sequestration materials are important tools to reduce mycotoxin illness and enable proper handling of mycotoxin-contaminated commodities. Three food-grade bentonite clays and four generally recognized as safe (GRAS) charcoal/biochar carbon materials that are marketed as feed additives and supplements were evaluated for their ability to sequester the mycotoxins aflatoxin B 1 , ochratoxin A, and zearalenone. The surface area of the clays varied between 32.1 to 51.4 mg 2 /g, and the surface area of the carbon-based materials varied from 1.7 to 1735 mg 2 /g. In vitro, gastric fluid studies indicated that certain pine biochar and activated coconut charcoal could sequester high amounts (85+%) of the mycotoxins at 1 ppm levels or below. However, some biochar materials with lower surface area properties lacked binding capacity. The coconut shell charcoal and pine biochar utilize agricultural waste products in a manner that significantly reduces carbon emissions and provides valuable materials to minimize exposure to toxins found in food and feed.

Background: Minimally Invasive Tissue Sampling (MITS) has been successfully used to establish the cause of death in low- and middle-income countries, mostly in stillbirths and neonates. The objective of this study was to determine the causes of death among adults using MITS in the Gandaki province of Nepal and to find out the contribution of MITS to identify the causes of death., Methods: A multicentric hospital-based pilot study was conducted to enroll 100 cases of adult deaths. The specimens of cerebrospinal fluid, blood, brain, lungs, and liver tissue were collected utilizing MITS. These specimens underwent standard histopathological, serological, and microbiological analyses. The findings from MITS, and if available, clinical records and forensic autopsy findings were compiled and the cause of death panel identified the causes of death. The final cause of death allocated to each case was based on the WHO International Medical Certificate of Death., Results: Among a total of 100 cases enrolled during the study period, infectious cause attributed to the immediate cause of death in 77 (77%), cardiovascular in 10 (10%), neurological in 8 (8%), malignancy in two (2%), and gastrointestinal and hepatobiliary cause in one (1%) case. The mean age of the cases was 50.8 ± 15.9 years and 76 (76%) were males. MITS established the cause of death in the causal chain of events in 81(81%) cases and identified the cause of death significantly more with infectious than non-infectious causes (p < 0.001)., Conclusions: MITS was useful in establishing the cause of death in the majority of adult deaths and the most common cause was infectious disease. Our findings suggest that MITS can be a valuable and alternative tool for mortality surveillance in low-resource settings, where complete diagnostic autopsies are less accepted or less prioritized., (© 2023. BioMed Central Ltd., part of Springer Nature.)

Background: Frozen section (FS) is an important decision making intraoperative tool in a non-oncology center especially in a region where women are often "lost to followup"., Objectives: Evaluate the use of FS in non-oncology setup for ovarian and uterine masses., Methods: A retrospective analysis of women who had undergone surgery with frozen section for large abdominopelvic masses at Central Referral Hospital, Sikkim, India, from July 2017 to July 2021., Results: 22 women were taken into study out of which 18 had FS for ovarian masses while 4 had frozen section for large uterine masses. All ovarian masses looked malignant on imaging while only 7 looked malignant intraoperatively. FS detected 8 women (44%) with ovarian malignancy out of which 2 were suspicious. The 2 suspicious cases were benign on final histopathology. FS was negative for malignancy in 10 women (56%) out of which 2 were borderline sero-mucinous on final histopathology. FS for ovarian masses showed sensitivity: 66.7% specificity: 83.3%, NPV: 83.3% and Accuracy of 80% when compared to the final histopathology. Intraoperatively 3 out of 4 uterine masses looked malignant. However, all of the uterine masses were negative on FS and final histopathology., Conclusion: Non-oncology centers are burdened with variety of benign surgeries, hence, FS is effective in detecting malignancy in ovarian tumors but not so in large uterine masses. Performing FS prevents "lost to follow ups" in ovarian tumors while avoiding it, saves time of experts while dealing with large uterine masses., Competing Interests: Conflict of InterestThere is no potential conflicts of interest., (© Federation of Obstetric & Gynecological Societies of India 2023. Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.)

The present study deals with the entropy generation analysis on the flow of an electrically conductive fluid (Blood) with [Formula: see text]-suspended nanoparticles through the irregular stenosed artery with thrombosis on the catheter. The fluid flow can be actuated by the interactions of different physical phenomena like electroosmosis, radiation, Joule heating and a uniform radial magnetic field. The analysis of different shapes and sizes of the nanoparticle is considered by taking the Crocine model. The velocity, temperature, and concentration distributions are computed using the Crank-Nicholson method within the framework of the Debye-Huckel linearization approximation. In order to see how blood flow changes in response to different parameters, the velocity contour is calculated. The aluminium oxide nanoparticles employed in this research have several potential uses in biomedicine and biosensing. The surface's stability, biocompatibility, and reactivity may be enhanced by surface engineering, making the material effective for deoxyribonucleic acid sensing. It may be deduced that the velocity profile reduces as the nanoparticle's size grows while depicts the reverse trend for the shape size. In a region close to the walls, the entropy profile decreases, while in the region in the middle, it rises as the magnetic field parameter rises. The present endeavour can be beneficial in biomedical sciences in designing better biomedical devices and gaining insight into the hemodynamic flow for treatment modalities., (© 2023. Springer Nature Limited.)

This study deals with the entropy generation analysis of synthetic cilia using a ternary hybrid nanofluid (Al-Cu-Fe2O3/Blood) flow through an inclined channel. The objective of the current study is to investigate the effects of entropy generation optimization, heat, and mass transfer on ternary hybrid nanofluid passing through an inclined channel in the proximity of the induced magnetic field. The novelty of the current study is present in studying the combined effect of viscous dissipation, thermophoresis, Brownian motion, exponential heat sink/source, porous medium, endothermic-exothermic chemical reactions, and activation energy in the proximity of induced magnetic field is examined. The governing partial differential equations (PDEs) are transformed into the ordinary differential equations (ODEs) using appropriate transformations. Applying the low Reynolds number and the long-wavelength approximation, resultant ODEs are numerically solved using shooting technique via BVP5C in MATLAB. The velocity, temperature, concentration, and induced magnetism profiles are visually discussed and graphically analyzed for various fluid flow parameters. Graphical analysis of physical interest quantities like mass transfer rate, heat transfer rate, entropy generation optimization, and skin friction coefficient are also graphically discussed. The entropy generation improves for enhancing values of Reynolds number, solutal Grashof number, heat sink/source parameter, Brinkman number, magnetic Prandtl number, and endothermic-exothermic reaction parameter while the reverse effect is noticed for chemical reaction and induced magnetic field parameter. The findings of this study can be applied to enhance heat transfer efficiency in biomedical devices, optimizing cooling systems, designing efficient energy conversion processes, and spanning from renewable energy technologies to aerospace propulsion systems., (© 2023. Springer Nature Limited.)

Novel value-added usage of glycerol (biodiesel coproduct) derivatives has been indispensable due to the extensive production of biodiesel. The physical properties of ultralow-sulfur diesel (ULSD) improved with the addition of technical-grade glycerol monooleate (TGGMO) with increasing concentration from 0.01 to 5 wt %. The influence of increasing concentration of TGGMO was studied on the acid value, cloud point, pour point, cold filter plugging point, kinematic viscosity, and lubricity of its blend with ULSD. The results showed improved lubricity for the blended ULSD with TGGMO as shown by the reduced wear scar diameter from 493 to 90 μm. The low-temperature flow properties were also improved as shown by lower pour points of -36 °C for the 1% TGGMO/ULSD blend compared to -25 °C for ULSDTGGMO blends in ULSD of up to 1 wt %, which met the ASTM standard D975 specifications. We also investigated the blending effect of the pure-grade monooleate (PGMO, purity level >99.98%) on the physical properties of ULSD at a blend concentration of 0.5 and 1.0%. Compared to PGMO, TGGMO significantly improved the physical properties of ULSD with increasing concentration from 0.01 to 1 wt %. Nevertheless, PGMO/TGGMO did not significantly affect the acid value, cloud point, or cold filter plugging point of ULSD. A comparison between TGGMO and PGMO showed that TGGMO improves the ULSD fuel lubricity and pour point more effectively than PGMO. PDSC data indicated that although addition of TGGMO will lower the oxidation stability slightly, it is still better than the addition of PGMO. Thermogravimetric analysis (TGA) data showed higher thermal stability and lesser volatility for TGGMO blends compared to those for PGMO blends. The cost effectiveness of TGGMO makes it a better ULSD fuel lubricity enhancer than PGMO., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

It is known that noncharged surfactants lead to electric effects that interact with biomimetic membranes made of nitrocellulose filters, which are impregnated with fatty acid esters. At a surfactant concentration as low as 64 micrometers in one of the solutions, they lead to the transient formation of transmembrane electric potential. Maximum changes of this potential are proportional to the log of noncharged surfactant concentrations when it changes by three orders of magnitude. We explain this new and nontrivial effect in terms of an earlier suggested physicochemical mechanics approach and noncharged surfactants transient changes induced by membrane permeability for inorganic ions. It could be used to imitate the interactions of non-ionic drugs with biological membranes. The effect may also be used in determining the concentration of these surfactants and other non-ionic chemicals of concern, such as pharmaceuticals and personal care products.

Poly(lactic acid) (PLA) is a common biobased film-former made from renewable biomass, such as polysaccharides from sugarcane, corn, or cassava. It has good physical properties but is relatively expensive when compared to the plastics used for food packaging. In this work, bilayer films were designed, incorporating a PLA layer and a layer of washed cottonseed meal (CSM), an inexpensive agro-based raw material from cotton manufacturing, where the main component is cottonseed protein. These bilayer films were made through the solvent casting method. The combined thickness of the PLA/CSM bilayer film was between 47 and 83 μm. The thickness of the PLA layer in this film was 10%, 30%, or 50% of the total bilayer film's thickness. Mechanical properties of the films, opacity, water vapor permeation, and thermal properties were evaluated. Since PLA and CSM are both agro-based, sustainable, and biodegradable, the bilayer film may be used as an eco-friendlier food packaging material, which helps reduce the environmental problems of plastic waste and microplastics. Moreover, the utilization of cottonseed meal may add value to this cotton byproduct and provide a potential economic benefit to cotton farmers.

A novel analysis of the electromagnetohydrodynamic (EMHD) non-Newtonian nanofluid blood flow incorporating CuO and Al2O3 nanoparticles through a permeable walled diseased artery having irregular stenosis and an aneurysm is analyzed in this paper. The non-Newtonian behavior of blood flow is addressed by the Casson fluid model. The effective viscosity and thermal conductivity of nanofluids are calculated using the Koo-Kleinstreuer-Li model, which takes into account the Brownian motion of nanoparticles. The mild stenosis approximation is employed to reduce the bi-directional flow of blood to uni-directional. The blood flow is influenced by an electric field along with a magnetic field perpendicular to the blood flow. The governing mathematical equations are solved using Crank-Nicolson finite difference approach. The model has been developed and validated by comparing the current results to previously published benchmarks that are peculiar to this study. The results are utilized to investigate the impact of physical factors on momentum diffusion and heat transfer. The Nusselt number escalates with increasing CuO nanoparticle diameter and diminishing the diameter of Al2O3 nanoparticles. The relative % variation in Nusselt number enhances with Magnetic number, whereas a declining trend is obtained for the electric field parameter. The present study's findings may be helpful in the diagnosis of hemodynamic abnormalities and the fields of nano-hemodynamics, nano-pharmacology, drug delivery, tissue regeneration, wound healing, and blood purification systems.

A library of 57 compounds of natural andrographolide was designed, synthesized, and screened for in vitro studies against four human cancer cell lines: A594, PC-3, MCF-7, and HCT-116. Most of the synthesized compounds displayed better cytotoxic profile against all tested cells compared to the parent andrographolide ( 1 ). The tested semisynthetic derivatives of andrographolide were found to be more sensitive toward lung carcinoma (A594) and prostate carcinoma (PC-3) cell lines. Among the synthesized compounds, the C-17 p -methoxy phenyl ester analog 8s inhibited cell proliferation effectively in A549 (IC 50 : 6.6 μM) and PC-3 (IC 50 : 5.9 μM) cell variants, and compound 9s exhibited the most potent activity against the A594 cell line, with an IC 50 value of 3.5 μM. Further anticancer mechanistic investigation demonstrated that compound 9s displayed nuclear morphological changes and increased reactive oxygen species (ROS) with disturbed mitochondrial membrane potential (MMP) that can lead to apoptosis. To know the exact structure confirmation of intermediate compounds 4 and 5 , single X-ray crystallography was performed, which supported the complete reaction design of this work., Competing Interests: The authors declare no competing financial interest., (© 2023 The Authors. Published by American Chemical Society.)

This article examines the effects of entropy generation, heat transmission, and mass transfer on the flow of Jeffrey fluid under the influence of solar radiation in the presence of copper nanoparticles and gyrotactic microorganisms, with polyvinyl alcohol-water serving as the base fluid. The impact of source terms such as Joule heating, viscous dissipation, and the exponential heat source is analyzed via a nonlinear elongating surface of nonuniform thickness. The development of an efficient numerical model describing the flow and thermal characteristics of a parabolic trough solar collector (PTSC) installed on a solar plate is underway as the use of solar plates in various devices continues to increase. Governing PDEs are first converted into ODEs using a suitable similarity transformation. The resulting higher-order coupled ODEs are converted into a system of first-order ODEs and then solved using the RK 4th-order method with shooting technique. The remarkable impacts of pertinent parameters such as Deborah number, magnetic field parameter, electric field parameter, Grashof number, solutal Grashof number, Prandtl number, Eckert number, exponential heat source parameter, Lewis number, chemical reaction parameter, bioconvection Lewis number, and Peclet number associated with the flow properties are discussed graphically. The increase in the radiation parameter and volume fraction of the nanoparticles enhances the temperature profile. The Bejan number and entropy generation rate increase with the rise in diffusion parameter and bioconvection diffusion parameter. The novelty of the present work is analyzing the entropy generation and solar radiation effects in the presence of motile gyrotactic microorganisms and copper nanoparticles with polyvinyl alcohol-water as the base fluid under the influence of the source terms, such as viscous dissipation, Ohmic heating, exponential heat source, and chemical reaction of the electromagnetohydrodynamic (EMHD) Jeffrey fluid flow. The non-Newtonian nanofluids have proven their great potential for heat transfer processes, which have various applications in cooling microchips, solar energy systems, and thermal energy technologies.

The present investigation aims to analyze higher-order endothermic/exothermic chemical reactions with activation energy by considering thermophoresis and Brownian motion effects on MHD mixed convective flow across a vertical stretching surface. The influence of velocity slip, thermal slip, and concentration slip along with an inclined external magnetic field is also considered. The governing coupled non-linear partial differential equations are transformed into ordinary differential equations using similarity transformation. The resulting system of non-linear ODEs is solved by the Newton Raphson shooting technique using the RK-4 algorithm. The impact of various physical parameters discovered in the problem viz. endothermic/exothermic reaction variable, thermophoresis parameter, activation energy parameter, Brownian motion parameter, chemical reaction parameter have been analyzed on velocity profile, temperature profile, and concentration profile. The effects of these parameters on skin-friction coefficient, Nusselt number, and Sherwood number are displayed in tabular form as well as surface plots. The impact of various physical parameters that appeared in the entropy generation is shown using surface and contour plots. The numerical findings are in good agreement with the previously published results. It is observed that an increment in thermophoresis and Brownian motion parameters results in a declination of entropy profiles, whereas an increment in Bejan number profiles is observed. A small region near the surface exhibits an inclination in concentration profiles with an increase in the order of the chemical reaction. In contrast, the opposite effect is analyzed near the boundary layer. Also, the contour and surface plots are displayed to portray real-world applications in industrial and technical processes and the physical depiction of flow characteristics that arise in the current study., (© 2022. The Author(s).)

Various toll-like receptor (TLR) agonists have shown potential as adjuvants with different vaccines in both human and livestock species, including chickens. Our previous studies on combination of lipopolysaccharide (LPS; TLR4 agonist) and resiquimod (R-848; TLR7 agonist) showed the synergistic up-regulation of pro-inflammatory Th1 and Th2 cytokines in chicken peripheral blood mononuclear cells (PMBCs). Hence, the present study aimed to explore the combined adjuvant effect of LPS and R-848 with inactivated Newcastle disease virus (NDV) vaccine in chickens. Two weeks-old SPF chickens were immunized with inactivated NDV vaccine along with a combination of LPS and R-848 as an adjuvant with suitable control groups. A booster dose was given two weeks later. Antibody responses were assessed by enzyme linked immunosorbent assay (ELISA) and hemagglutination inhibition (HI) test, while cell-mediated immune responses were analyzed by a lymphocyte transformation test (LTT) and flow cytometry following vaccination. Two weeks post-booster, the birds were challenged with a velogenic strain of NDV, and protection against clinical signs, mortality and virus shedding was analyzed. The results indicated that inactivated NDV vaccine with R-848 induced significantly higher humoral and cellular immune responses with 100% protection against mortality and viral shedding following a virulent NDV challenge. However, the combination of LPS and R-848 along with inactivated NDV vaccine produced poor humoral and cellular immune responses and could not afford protection against challenge infection and virus shedding when compared to the vaccine-alone group, indicating the deleterious effects of the combination on antigen-specific immune responses. In conclusion, the combination of LPS and R-848 showed the inhibitory effects on antigen-specific humoral, cellular and protective immune responses when used as an adjuvant with inactivated NDV vaccines in chickens. This inhibitory effect might have occurred due to systemic cytokine storm. A nanoparticle-based delivery of the combination of LPS and R-848 for slow and sustained release could be tried as an alternative method to explore the synergistic effect of the combination as an adjuvant in chickens.

The polymeric properties are tailored and enhanced by high energy radiation processing, which is an effective technique to tune the physical, chemical, thermal, surface, and structural properties of the various thermoplastic and elastomeric polymeric components. The gamma and electron beam radiation are the most frequent radiation techniques used for crosslinking, compatibilizing, and grafting of various polymer blends and composites systems. The gamma radiation-induced grafting and crosslinking are the effective, rapid, clean, user-friendly, and well-controlled techniques for the polymeric materials for their properties improvement for high performance applications such as nuclear, automobile, electrical insulation, ink curing, surface modification, food packaging, medical, sterilization, and health-care in a different environment. Similarly, electron beam radiations crosslinking has been a well-known technique for properties development and has economic benefits over chemical crosslinking techniques. This review focuses on the development of polymeric multi component systems (functionalized polymer, blends, and nanohybrids), where partially nanoscale clay incorporation can achieve the desired properties, and partially by controlled high energy radiations crosslinking of blends and nanocomposites. In this review, various investigations have been studied on the development and modifications of polymeric systems, and controlled dose gamma radiation processed the polymer blends and clay-induced composites. Radiation induced grafting of the various monomers on the polymer backbone has been focused. Similarly, comparative studies of gamma and electron beam radiation and their effect on property devlopment have been focused. The high energy radiation modified polymers have been used in several high performance sectors, including automotive, wire and cable insulation, heat shrinkable tube, sterilization, biomedical, nuclear and space applications., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Naikwadi, Sharma, Bhatt and Mahanwar.)

Cholangiocytes are epithelial cells lining the intrahepatic and extrahepatic bile ducts. Cholangiocytes perform key physiological functions in the liver. Bile synthesized by hepatocytes is secreted into bile canaliculi, further stored in the gallbladder, and finally discharged into the duodenum. Due to liver injury, biliary epithelial proliferate in response to endogenous or exogenous signals leading to cholangiopathies, inflammation, fibrosis, and cholangiocarcinoma. Cholangiocytes exhibit anatomical and functional heterogeneity, and understanding such diversified functions will potentially help in finding effective therapies for various cholestatic liver diseases. To perform such functional studies, effective cholangiocyte isolation and culture procedures are needed. This protocol will aid in easy isolation and expansion of cholangiocytes from the liver., Competing Interests: Competing interestsAll authors declare no conflict of interest., (Copyright © 2021 The Authors; exclusive licensee Bio-protocol LLC.)

Background: We previously showed that fibrinogen is a major determinant of the growth of a murine model of colorectal cancer (CRC)., Objective: Our aim was to define the mechanisms coupling fibrin(ogen) to CRC growth., Results: CRC tumors transplanted into the dorsal subcutis of Fib - mice were less proliferative and demonstrated increased senescence relative to those grown in Fib + mice. RNA-seq analyses of Fib + and Fib - tumors revealed 213 differentially regulated genes. One gene highly upregulated in tumors from Fib - mice was stratifin, encoding 14-3-3σ, a master regulator of proliferation/senescence. In a separate cohort, we observed significantly increased protein levels of 14-3-3σ and its upstream and downstream targets (i.e., p53 and p21) in tumors from Fib - mice. In vitro analyses demonstrated increased tumor cell proliferation in a fibrin printed three-dimensional environment compared with controls, suggesting that fibrin(ogen) in the tumor microenvironment promotes tumor growth in this context via a tumor cell intrinsic mechanism. In vivo analyses showed diminished activation of focal adhesion kinase (FAK), a key negative regulator of p53, in Fib - tumors. Furthermore, nuclear magnetic resonance-based metabolomics demonstrated significantly reduced metabolic activity in tumors from Fib - relative to Fib + mice. Together, these findings suggest that fibrin(ogen)-mediated engagement of colon cancer cells activates FAK, which inhibits p53 and its downstream targets including 14-3-3σ and p21, thereby promoting cellular proliferation and preventing senescence., Conclusions: These studies suggest that fibrin(ogen) is an important component of the colon cancer microenvironment and may be exploited as a potential therapeutic target., (© 2021 International Society on Thrombosis and Haemostasis.)

Purpose: The people of Northeast India comprise mostly of Mongoloid descent with characteristic craniofacial features. The purpose of this study was to evaluate the normal orbital structures with MRI and determine normative data in the Northeast Indian pediatric population., Methods: MRI images of the 302 orbits of 151 pediatric patients below 16 years of age were retrospectively evaluated to measure the various orbital structures. Both axial and coronal MRI images were utilized for various orbital measurements. An independent sample t-test was done to compare various orbital data according to the sex and side. Linear regression was also done., Results: The mean age of the pediatric population was 9.64 ± 1.47 years with a male: Female ratio of 1.13:1. The mean interzygomatic line was 88.4 ± 9.09 mm and the interorbital line was 22.18 ± 3.62 mm. The mean thicknesses of medial, lateral, superior, and inferior recti muscles were 2.58 ± 0.46, 2.34 ± 0.42, 2.16 ± 0.40, and 2.53 ± 0.49 mm in males and 2.41 ± 0.41, 2.08 ± 0.34, 2.08 ± 0.46, and 2.46 ± 0.49 mm in females. The mean horizontal orbital, vertical orbital diameters, orbital index, mean volume of eyeball, and orbital cavity were 30.27 ± 2.97,3 7.06 ± 3.57, 122.58 ± 7.39, 4.63 ± 0.84, and 15.29 ± 3.52 in males, while 29.16 ± 3.23, 34.96 ± 3.99,119.96 ± 7.31, 4.49 ± 0.87, and 14.65 ± 3.47 in females, respectively. With an increase in age, the interzygomatic line (r = 0.883, r 2 = 0.780; P < 0.0005), anterior medial interorbital line (r = 0.808, r 2 = 0.652; P < 0.0005), mean volume of eyeball (r = 0.915, r 2 = 0.838; P < 0.0005), orbital cavity (r = 0.924, r 2 = 0.854; P < 0.0005), and distance between the optic nerve entry site (r = 0.829, r 2 = 0.687; P < 0.0005) were increased., Conclusion: This study provides normative data of various orbital structures in a pediatric population and these data likely to be useful for diagnosing various pediatric orbital disorders and helps in the planning of various surgical procedures of orbits.

Snakebite envenoming is a life-threatening disease in humans and animals and a major public health issue in rural communities of South-East Asia and sub-Saharan Africa. Yet the impact of snakebite on domestic animals has been poorly studied. This study aimed to describe the context, clinical features, treatment, and outcomes of snakebite envenoming in domestic animals in Nepal and Cameroon. Primary data on snakebite in animals were recorded from a community-based nation-wide survey on human and animal snakebite in Nepal and Cameroon ( Snake-byte project). Mobile teams collected data on snakebite in humans and animals in 13,879 and 10,798 households in Nepal and Cameroon respectively from December 2018 to June 2019. This study included 405 snakebite cases (73 in Nepal and 332 in Cameroon) in multiple types of animals. An interview with a structured questionnaire collected specific information about the animal victims. Snake bites in animals took place predominantly inside and around the house or farm in Nepal (92%) and Cameroon (71%). Other frequent locations in Cameroon were field or pasture (12%). A large diversity of clinical features was reported in all types of envenomed animals. They showed either a few clinical signs (e.g., local swelling, bleeding) or a combination of multiple clinical signs. Only 9% of animal victims, mainly cattle and buffaloes and less frequently goats, sheep, and dogs, received treatment, predominantly with traditional medicine. The overall mortality of snakebite was 85% in Nepal and 87% in Cameroon. Results from this nationwide study show an important impact of snakebite on animal health in Nepal and Cameroon. There is a need for cost-effective prevention control strategies and affordable snakebite therapies in the veterinary field to save animal lives and farmer livelihood in the poorest countries of the world. The WHO global strategy to prevent and control snakebite envenoming supports a One Health approach, which may help develop integrated solutions to the snakebite problem taking into account human and animal health., (© 2021 The Authors.)

Plastic is referred to as a "material of every application". From the packaging and automotive industries to the medical apparatus and computer electronics sectors, plastic materials are fulfilling demands efficiently. These plastics usually end up in landfills and incinerators, creating plastic waste pollution. According to the Environmental Protection Agency (EPA), in 2015, 9.1% of the plastic materials generated in the U.S. municipal solid waste stream was recycled, 15.5% was combusted for energy, and 75.4% was sent to landfills. If we can produce high-value chemicals from plastic wastes, a range of various product portfolios can be created. This will help to transform chemical industries, especially the petrochemical and plastic sectors. In turn, we can manage plastic waste pollution, reduce the consumption of virgin petroleum, and protect human health and the environment. This review provides a description of chemicals that can be produced from different plastic wastes and the research challenges involved in plastic waste to chemical production. This review also provides a brief overview of the state-of-the-art processes to help future system designers in the plastic waste to chemicals area.

Background Multiecho fast field echo (mFFE) MRI sequence provides added value to the conventional MR imaging in evaluation of acute spinal trauma, especially for detecting spinal cord hemorrhage which is a best predictor for patient prognosis. Objective This study aims to evaluate the diagnostic efficacies of three-plane mFFE MRI sequence along with the conventional MRI sequences in acute spinal trauma patients using sensitivity.  Materials and methods This prospective study comprised of 48 patients of acute spinal trauma. The neurological deficit of acute spinal trauma patients assessed according to the American Spine Injury Association (ASIA) scale. The correlation between the various MRI findings of acute spinal cord injury and neurological deficits were compared with the Chi-square test. Results Of 48 patients of acute spinal trauma, 36 males and 12 females with a mean age of 38.71±1.42 [SD] years. 22 (45.8%) patients had cord edema with a mean length of was 3.45±5.52 [SD] cm. The mean percentage of spinal canal compromisation was 39.47±25.47 [SD] and spinal cord compression 18.1±24.4 [SD]. There was statistical significance between the ASIA impairment scale and spinal canal compromisation and cord compression with a p-value of 0.0005. Cord hemorrhage observed in 13 (27%), non-hemorrhagic cord contusions in 3 (6.3%), cord transection in 5 (10.4%) and epidural hematoma in 10 (20.8%) patients with an initial high grade of ASIA scale. The visibility score of three-plane mFFE sequence was higher in comparison to the single plane sagittal mFFE and short tau inversion recovery (STIR) sequences. For detection of spinal cord hemorrhage with visibility score of 2, the three-plane mFFE had sensitivity of 77% followed by 38.5% with single plane sagittal mFFE and 7.7% with sagittal STIR images. 26 (54.2%) patients showed neurological improvement in their hospital stay/follow-up period and no improvement observed in 7 (14.6%) patients of acute spinal trauma. Conclusions Application of three-plane mFFE sequences detects more spinal cord hemorrhages and vertebral fractures with a better visibility score as compared to the single sagittal plane mFFE and STIR sequence., Competing Interests: The authors have declared that no competing interests exist., (Copyright © 2021, Boruah et al.)