Search

Floods in urban environments often result in loss of life and destruction of property, with many negative socio-economic effects. However, the application of most flood prediction models still remains challenging due to data scarcity. This creates a need to develop novel hybridized models based on historical urban flood events, using, e.g., metaheuristic optimization algorithms and wavelet analysis. The hybridized models examined in this study (Wavelet-SVR-Bat and Wavelet-SVR-GWO), designed as intelligent systems, consist of a support vector regression (SVR), integrated with a combination of wavelet transform and metaheuristic optimization algorithms, including the grey wolf optimizer (GWO), and the bat optimizer (Bat). The efficiency of the novel hybridized and standalone SVR models for spatial modeling of urban flood inundation was evaluated using different cutoff-dependent and cutoff-independent evaluation criteria, including area under the receiver operating characteristic curve (AUC), Accuracy (A), Matthews Correlation Coefficient (MCC), Misclassification Rate (MR), and F-score. The results demonstrated that both hybridized models had very high performance (Wavelet-SVR-GWO: AUC = 0.981, A = 0.92, MCC = 0.86, MR = 0.07; Wavelet-SVR-Bat: AUC = 0.972, A = 0.88, MCC = 0.76, MR = 0.11) compared with the standalone SVR (AUC = 0.917, A = 0.85, MCC = 0.7, MR = 0.15). Therefore, these hybridized models are a promising, cost-effective method for spatial modeling of urban flood susceptibility and for providing in-depth insights to guide flood preparedness and emergency response services.

One important step in binary modeling of environmental problems is the generation of absence-datasets that are traditionally generated by random sampling and can undermine the quality of outputs. To solve this problem, this study develops the Absence Point Generation (APG) toolbox which is a Python-based ArcGIS toolbox for automated construction of absence-datasets for geospatial studies. The APG employs a frequency ratio analysis of four commonly used and important driving factors such as altitude, slope degree, topographic wetness index, and distance from rivers, and considers the presence locations buffer and density layers to define the low potential or susceptibility zones where absence-datasets are generated. To test the APG toolbox, we applied two benchmark algorithms of random forest (RF) and boosted regression trees (BRT) in a case study to investigate groundwater potential using three absence datasets i.e., the APG, random, and selection of absence samples (SAS) toolbox. The BRT-APG and RF-APG had the area under receiver operating curve (AUC) values of 0.947 and 0.942, while BRT and RF had weaker performances with the SAS and Random datasets. This effect resulted in AUC improvements for BRT and RF by 7.2, and 9.7% from the Random dataset, and AUC improvements for BRT and RF by 6.1, and 5.4% from the SAS dataset, respectively. The APG also impacted the importance of the input factors and the pattern of the groundwater potential maps, which proves the importance of absence points in environmental binary issues. The proposed APG toolbox could be easily applied in other environmental hazards such as landslides, floods, and gully erosion, and land subsidence.

Nitrate pollution of groundwater has increased dramatically worldwide due to increase of population and agricultural productivity. The resulting nitrate concentration in groundwater is usually a combination of various types of point and non-point pollutant sources. It is often difficult to distinguish between these sources since groundwater is formed in large and complex catchments with various natural processes and anthropogenic influence that contribute to a certain downstream nitrate concentration. For such conditions, this paper uses a methodology that can be used to inversely determine type and location of main nitrate pollutant source. The methodology builds on two state-of-the-art data mining techniques, boosted regression tree (BRT) and k-nearest neighbor (KNN). These techniques are used to produce a nitrate pollution vulnerability map. The methodology can mitigate effects of subjective judgement on determining importance of different sources and mechanisms for nitrate transport. The investigated mechanisms are hydrogeological, hydrological, anthropogenic, topography, and soil conditioning factors. Thus, the proposed methodology is used to separate between natural processes and anthropogenic effects on nitrate pollution. To calculate the groundwater vulnerability maps, a groundwater nitrate concentration of 40 mg/L (suggested by WHO with a 20% risk margin) was selected as a general threshold for identifying polluted areas that resulted in 96 polluted wells. Non-polluted locations were selected from well data with nitrate concentration less than 15 mg/L (96 non-polluted). The models were trained on 70% polluted and 70% non-polluted site data. The remaining data, 30% polluted and 30% non-polluted sites, were used to validate the simulation results. Results showed that the BRT produced outputs with higher performance than the KNN algorithm. The final ranking results based on the BRT model showed the higher importance of hydraulic conductivity, river density, soil, slope percent, net recharge, and distance from villages, in order, relative to other factors.

In this study, a new hybridized machine learning algorithm for urban flood susceptibility mapping, named MultiB-MLPNN, was developed using a multi-boosting technique and MLPNN. The model was tested in Amol City, Iran, a data-scarce city in an ungauged area which is prone to severe flood inundation events and currently lacks flood prevention infrastructure. Performance of the hybridized model was compared with that of a standalone MLPNN model, random forest and boosted regression trees. Area under the curve, efficiency, true skill statistic, Matthews correlation coefficient, misclassification rate, sensitivity and specificity were used to evaluate model performance. In validation, the MultiB-MLPNN model showed the best predictive performance. The hybridized MultiB-MLPNN model is thus useful for generating realistic flood susceptibility maps for data-scarce urban areas. The maps can be used to develop risk-reduction measures to protect urban areas from devastating floods, particularly where available data are insufficient to support physically based hydrological or hydraulic models.

In recent years, assessment of sediment contamination by heavy metals, i.e., arsenic, has attracted the interest of scientists worldwide. The present study provides a new methodology to better understand the factors influencing surface water vulnerability to arsenic pollution by two advanced machine learning algorithms including boosted regression trees (BRT) and random forest (RF). Based on the sediment quality guidelines (Effects range low) polluted and non-polluted arsenic sediment samples were defined with concentrations8 ppm and8 ppm, respectively. Different conditioning factors such as topographical, lithology, erosion, hydrological, and anthropogenic factors were acquired to model surface waters' vulnerability to arsenic. We trained and validated the models using 70 and 30% of both polluted and non-polluted samples, respectively, and generated surface vulnerability maps. To verify the maps to arsenic pollution, the receiver operating characteristics (ROC) curve was implemented. The results approved the acceptable performance of the RF and BRT algorithms with an area under ROC values of 85% and 75.6%, respectively. Further, the findings showed higher importance of precipitation, slope aspect, distance from residential areas, and slope length in arsenic pollution in the modeling process. Erosion, lithology, and land use maps were introduced as the least important factors. The introduced methodology can be used to define the most vulnerable areas to arsenic pollution in advance and implement proper remediation actions to reduce the damages.

Groundwater (GW) is being uncontrollably exploited in various parts of the world resulting from huge needs for water supply as an outcome of population growth and industrialization. Bearing in mind the importance of GW potential assessment in reaching sustainability, this study seeks to use remote sensing (RS)-derived driving factors as an input of the advanced machine learning algorithms (MLAs), comprising deep boosting and logistic model trees to evaluate their efficiency. To do so, their results are compared with three benchmark MLAs such as boosted regression trees, k-nearest neighbors, and random forest. For this purpose, we firstly assembled different topographical, hydrological, RS-based, and lithological driving factors such as altitude, slope degree, aspect, slope length, plan curvature, profile curvature, relative slope position, distance from rivers, river density, topographic wetness index, land use/land cover (LULC), normalized difference vegetation index (NDVI), distance from lineament, lineament density, and lithology. The GW spring indicator was divided into two classes for training (434 springs) and validation (186 springs) with a proportion of 70:30. The training dataset of the springs accompanied by the driving factors were incorporated into the MLAs and the outputs were validated by different indices such as accuracy, kappa, receiver operating characteristics (ROC) curve, specificity, and sensitivity. Based upon the area under the ROC curve, the logistic model tree (87.813%) generated similar performance to deep boosting (87.807%), followed by boosted regression trees (87.397%), random forest (86.466%), and k-nearest neighbors (76.708%) MLAs. The findings confirm the great performance of the logistic model tree and deep boosting algorithms in modelling GW potential. Thus, their application can be suggested for other areas to obtain an insight about GW-related barriers toward sustainability. Further, the outcome based on the logistic model tree algorithm depicts the high impact of the RS-based factor, such as NDVI with 100 relative influence, as well as high influence of the distance from river, altitude, and RSP variables with 46.07, 43.47, and 37.20 relative influence, respectively, on GW potential.

Freshwater scarcity is an ever-increasing problem throughout the arid and semi-arid countries, and it often results in poverty. Thus, it is necessary to enhance understanding of freshwater resources availability, particularly for groundwater, and to be able to implement functional water resources plans. This study introduces a novel statistical approach combined with a data-mining ensemble model, through implementing evidential belief function and boosted regression tree (EBF-BRT) algorithms for groundwater potential mapping of the Lordegan aquifer in central Iran. To do so, spring locations are determined and partitioned into two groups for training and validating the individual and ensemble methods. In the next step, 12 groundwater-conditioning factors (GCFs), including topographical and hydrogeological factors, are prepared for the modeling process. The mentioned factors are employed in the application of the EBF model. Then, the EBF values of the GCFs are implemented as input to the BRT algorithm. The results of the modeling process are plotted to produce spring (groundwater) potential maps. To verify the results, the receiver operating characteristics (ROC) test is applied to the model’s output. The findings of the test indicated that the areas under the ROC curves are 75 and 82% for the EBF and EBF-BRT models, respectively. Therefore, it can be inferred that the combination of the two techniques could increase the efficacy of these methods in groundwater potential mapping.

© 2017 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group. All rights reserved. Landslide is a natural hazard that results in many economic damages and human losses every year. Numerous researchers have studied landslide susceptibility mapping (LSM), each attempting to improve the accuracy of the final outputs. However, few studies have been published on the training data selection effects on the LSM. Thus, this study assesses the training landslides random selection effects on support vector machine (SVM) accuracy, logistic regression (LR) and artificial neural networks (ANN) models for LSM in a catchment at the Dodangeh watershed, Mazandaran province, Iran. A 160 landslide locations inventory was collected by Geological Survey of Iran for this investigation. Different methods were implemented to define the landslide locations, such as inventory reports, satellite images and field survey. Moreover, 14 landslide conditioning factors were considered in the analysis of landslide susceptibility. These factors include curvature, plan curvature, profile curvature, altitude, slope angle, slope aspect, distance to faults, distance to stream, topographic wetness index, stream power index, terrain roughness index, sediment transport index, lithology and land use. The results show that the random landslide training data selection affected the parameter estimations of the SVM, LR and ANN algorithms. The results also show that the training samples selection had an effect on the accuracy of the susceptibility model because landslide conditioning factors vary according to the geographic locations in the study area. The LR model was found to be less sensitive than the SVM and ANN models to the training samples selection. Validation results showed that SVM and LR models outperformed the ANN model for all scenarios. The average overall accuracy of LR, SVM and ANN models are 81.42%, 79.82% and 70.2%, respectively.

The main aim of this study was to apply and compare two GIS-based data mining models, namely support vector machine (SVM) by four kernel functions (linear-SVM, polynomial-SVM, radial basic function-SVM, and sigmoidal-SVM) and entropy models in landslide susceptibility mapping, in Shangzhou District, China. Initially, 145 landslide locations were mapped using early reports, aerial photographs, and supported by field surveys. Subsequently, landslides in the study area were divided randomly into training and validation datasets (70/30) using ArcGIS 10.0 software. In the current study, 14 landslide conditioning factors, namely, slope aspect, slope angle, profile curvature, plan curvature, altitude, topographic wetness index (TWI), stream power index (SPI), sediment transport index (STI), normalized difference vegetation index (NDVI), distance from roads, distance from rivers, distance from faults, rainfall, and lithology, were exploited to detect the most susceptible areas. In the next step, landslide susceptibility maps generated by four types of SVM or entropy models were produced. Finally, validation of the landslide susceptibility maps produced by different models was evaluated using receiver operating characteristics (ROC) curves. The results showed that the entropy model exhibited the highest success rate (0.7610), followed by polynomial-SVM (0.7526), the sigmoidal-SVM (0.7518), radial basic function-SVM (0.7446), and linear-SVM (0.7390) models. Similarly, the ROC plots also showed that the prediction rates gave almost similar results. The entropy model had the highest prediction rate (0.7599), followed by polynomial-SVM (0.7259), sigmoidal-SVM (0.7203), radial basic function-SVM (0.7149), and linear-SVM (0.7009) models. Hence, it can be concluded that the five models used in this study gave close results, with the entropy model exhibiting best performance in landslide susceptibility mapping.

The main objective of the current study is to apply a random forest (RF) data-driven model and prioritization of landslide conditioning factors according to this method and its comparison to a multivariate adaptive regression spline (MARS) model for landslide susceptibility mapping in China. For this purpose, at first, landslide locations were identified by earlier reports, aerial photographs, and field surveys and a total of 348 landslides were mapped from various sources in GIS. Then, the landslide inventory was randomly split into a training dataset (70% = 244 landslides) and the remaining (30% = 104 landslides) were used for validation. In this study, 12 landslide conditioning factors were applied to detect the most susceptible areas. These factors were slope aspect, altitude, distance to faults, lithology, normalized difference vegetation index, plan curvature, profile curvature, distance to rivers, distance to roads, slope angle, stream power index, and topographic wetness index. The relationship between each conditioning factor and landslide was finalized using a frequency ration (FR) model. Subsequently, landslide-susceptible areas were mapped using the MARS and RF models. The results revealed that the most important conditioning factors according to the accuracy measure (mean decrease) of the RF model are lithology (23.47%), distance to faults (22.21%), and altitude (19.58%). We also notice that altitude (19.04%), distance to faults (18.83%), and distance to roads (15.29%) have the highest importance according to the Gini measure. Finally, the accuracy of the landslide susceptibility maps produced from the two models was verified using a receiver operating characteristics curve. The results showed that the landslide susceptibility map produced using the MARS model has a higher prediction rate than RF by area under the curve values of 87.51 and 77.32%, respectively. According to the validation results, the map produced by the MARS model exhibits the better accuracy and could be proposed for land-use planning in the study area.

Considering the unstable condition of water resources in Iran and many other countries in arid and semi-arid regions, groundwater studies are very important. Therefore, the aim of this study is to model groundwater potential by qanat locations as indicators and ten advanced and soft computing models applied to the Beheshtabad Watershed, Iran. Qanat is a man-made underground construction which gathers groundwater from higher altitudes and transmits it to low land areas where it can be used for different purposes. For this purpose, at first, the location of the qanats was detected using extensive field surveys. These qanats were classified into two datasets including training (70%) and validation (30%). Then, 14 influence factors depicting the region’s physical, morphological, lithological, and hydrological features were identified to model groundwater potential. Linear discriminant analysis (LDA), quadratic discriminant analysis (QDA), flexible discriminant analysis (FDA), penalized discriminant analysis (PDA), boosted regression tree (BRT), random forest (RF), artificial neural network (ANN), K-nearest neighbor (KNN), multivariate adaptive regression splines (MARS), and support vector machine (SVM) models were applied in R scripts to produce groundwater potential maps. For evaluation of the performance accuracies of the developed models, ROC curve and kappa index were implemented. According to the results, RF had the best performance, followed by SVM and BRT models. Our results showed that qanat locations could be used as a good indicator for groundwater potential. Furthermore, altitude, slope, plan curvature, and profile curvature were found to be the most important influence factors. On the other hand, lithology, land use, and slope aspect were the least significant factors. The methodology in the current study could be used by land use and terrestrial planners and water resource managers to reduce the costs of groundwater resource discovery.

Groundwater resources are facing a high pressure due to drought and overexploitation. The main aim of this research is to apply rotation forest (RTF) with decision trees as base classifiers and an improved ensemble methodology based on evidential belief function and tree-based models (EBFTM) for preparing groundwater potential maps (GPM). The performance of these new models is then compared with three previously implemented models, i.e., boosted regression tree (BRT), classification and regression tree (CART), and random forest (RF). For this purpose, spring locations in the Meshgin Shahr in Iran were detected. The spring locations were randomly categorized into training (70% of the locations) and validation (30% of the locations) datasets. Furthermore, several groundwater conditioning factors (GCFs) such as hydrogeological, topographical, and land use factors were mapped and regarded as input variables. The tree-based algorithms (i.e., BRT, CART, RF, and RTF) were applied by implementing the input variables and training dataset. The groundwater potential values (i.e., spring occurrence probability) obtained by the BRT, CART, RF, and RTF models for all the pixels of the study area were classified into four potential classes and then used as inputs of the EBF model to construct the new ensemble model (i.e., EBFTM). At last, this paper implemented a receiver operating characteristics (ROC) curve for determining the efficiency of the EBFTM, RTF, BRT, CART, and RF methods. The findings illustrated that the EBFTM had the highest efficacy with an area under the ROC curve (AUC) of 90.4%, followed by the RF, BRT, CART, and RTF models with AUC-ROC values of 90.1, 89.8, 86.9, and 86.2%, respectively. Thus, it could be inferred that the ensemble approach is capable of improving the efficacy of the single tree-based models in GPM production.

© 2018 by the authors. It is a well-known fact that sustainable development goals are difficult to achieve without a proper water resources management strategy. This study tries to implement some state-of-the-art statistical and data mining models i.e., weights-of-evidence (WoE), boosted regression trees (BRT), and classification and regression tree (CART) to identify suitable areas for artificial recharge through floodwater spreading (FWS). At first, suitable areas for the FWS project were identified in a basin in north-eastern Iran based on the national guidelines and a literature survey. Using the same methodology, an identical number of FWS unsuitable areas were also determined. Afterward, a set of different FWS conditioning factors were selected for modeling FWS suitability. The models were applied using 70% of the suitable and unsuitable locations and validated with the rest of the input data (i.e., 30%). Finally, a receiver operating characteristics (ROC) curve was plotted to compare the produced FWS suitability maps. The findings depicted acceptable performance of the BRT, CART, and WoE for FWS suitability mapping with an area under the ROC curves of 92, 87.5, and 81.6%, respectively. Among the considered variables, transmissivity, distance from rivers, aquifer thickness, and electrical conductivity were determined as the most important contributors in the modeling. FWS suitability maps produced by the proposed method in this study could be used as a guideline for water resource managers to control flood damage and obtain new sources of groundwater. This methodology could be easily replicated to produce FWS suitability maps in other regions with similar hydrogeological conditions.

© 2018, Springer International Publishing AG, part of Springer Nature. Ever increasing demand for water resources for different purposes makes it essential to have better understanding and knowledge about water resources. As known, groundwater resources are one of the main water resources especially in countries with arid climatic condition. Thus, this study seeks to provide groundwater potential maps (GPMs) employing new algorithms. Accordingly, this study aims to validate the performance of C5.0, random forest (RF), and multivariate adaptive regression splines (MARS) algorithms for generating GPMs in the eastern part of Mashhad Plain, Iran. For this purpose, a dataset was produced consisting of spring locations as indicator and groundwater-conditioning factors (GCFs) as input. In this research, 13 GCFs were selected including altitude, slope aspect, slope angle, plan curvature, profile curvature, topographic wetness index (TWI), slope length, distance from rivers and faults, rivers and faults density, land use, and lithology. The mentioned dataset was divided into two classes of training and validation with 70 and 30% of the springs, respectively. Then, C5.0, RF, and MARS algorithms were employed using R statistical software, and the final values were transformed into GPMs. Finally, two evaluation criteria including Kappa and area under receiver operating characteristics curve (AUC-ROC) were calculated. According to the findings of this research, MARS had the best performance with AUC-ROC of 84.2%, followed by RF and C5.0 algorithms with AUC-ROC values of 79.7 and 77.3%, respectively. The results indicated that AUC-ROC values for the employed models are more than 70% which shows their acceptable performance. As a conclusion, the produced methodology could be used in other geographical areas. GPMs could be used by water resource managers and related organizations to accelerate and facilitate water resource exploitation.

Landslide is one of the most important natural hazards that make numerous financial damages and life losses each year in the worldwide. Identifying the susceptible areas and prioritizing them in order to provide an efficient susceptibility management is very vital. In current study, a comparative analysis was made between combined bivariate and AHP models (bivariate-AHP) with a logistic regression. At first, landslide inventory map of the study area was prepared using extensive field surveys and aerial photographs interpretation. In the next step, nine landslide causative factors were selected including altitude, slope percentage, slope aspect, lithology, distance from faults, streams and roads, land use, and precipitation which affect occurrence of the landslides in the study area. Subsequently, landslide susceptibility maps were produced using weighted (AHP) bivariate and logistic regression models. Finally, receiver operating characteristics (ROC) curve was used in order to evaluate the prediction capability of the mentioned models for landslide susceptibility mapping. According to the results, the combined bivariate and AHP models provided slightly higher prediction accuracy than logistic regression model. The combined bivariate and AHP, and logistic regression models had the area under the curve (AUC-ROC) values of 0.914, and 0.865, respectively. The resultant landslide susceptibility maps can be useful in appropriate watershed management practices and for sustainable development in the regions with similar conditions.

Groundwater is considered one of the most valuable fresh water resources. The main objective of this study was to produce groundwater spring potential maps in the Koohrang Watershed, Chaharmahal-e-Bakhtiari Province, Iran, using three machine learning models: boosted regression tree (BRT), classification and regression tree (CART), and random forest (RF). Thirteen hydrological-geological-physiographical (HGP) factors that influence locations of springs were considered in this research. These factors include slope degree, slope aspect, altitude, topographic wetness index (TWI), slope length (LS), plan curvature, profile curvature, distance to rivers, distance to faults, lithology, land use, drainage density, and fault density. Subsequently, groundwater spring potential was modeled and mapped using CART, RF, and BRT algorithms. The predicted results from the three models were validated using the receiver operating characteristics curve (ROC). From 864 springs identified, 605 (≈70 %) locations were used for the spring potential mapping, while the remaining 259 (≈30 %) springs were used for the model validation. The area under the curve (AUC) for the BRT model was calculated as 0.8103 and for CART and RF the AUC were 0.7870 and 0.7119, respectively. Therefore, it was concluded that the BRT model produced the best prediction results while predicting locations of springs followed by CART and RF models, respectively. Geospatially integrated BRT, CART, and RF methods proved to be useful in generating the spring potential map (SPM) with reasonable accuracy.