Search

Colloidal two-dimensional lead chalcogenide nanocrystals represent an intriguing new class of materials that push the boundaries of quantum confinement by combining a crystal thickness down to the monolayer with confinement in the lateral dimension. In particular flat PbSe quantum dots exhibit efficient telecommunication band-friendly photoluminescence (1.43 - 0.83 eV with up to 61% quantum yield) that is highly interesting for fiber-optics information processing. By using cryogenic scanning tunneling microscopy and spectroscopy, we probe distinct single layer-defined PbSe quantum dot populations down to a monolayer with in-gap state free quantum dot-like density of states, in agreement with theoretical tight binding calculations. Cryogenic ensemble photoluminescence spectra reveal mono-, bi-, and trilayer contribution, confirming the structural, electronic and theoretical results. From larger timescale shifts and ratio changes in the optical spectra we infer Ostwald ripening in solution and fusing in deposited samples of thinner flat PbSe quantum dots, which can be slowed down by surface passivation with PbI2. By uncovering the interplay between thickness, lateral size and density of states, as well as the synthetic conditions and post-synthetic handling, our findings enable the target-oriented synthesis of two-dimensional PbSe quantum dots with precisely tailored optical properties at telecom wavelengths.

Near-infrared emitting colloidal two-dimensional (2D) PbX (X=S, Se) nanoplatelets have emerged as interesting materials with strong size quantisation in the thickness dimension. They act as model systems for efficient charge carrier multiplication and hold potential as intriguing candidates for finer-based photonic quantum applications. However, synthetic access to the third family member, 2D PbTe, remains elusive due to a challenging precursor chemistry. Here, we report a direct synthesis for 2D PbTe nanoplatelets (NPLs) with unable photoluminescence (PL, 910-1460 nm (1.36-0.85 eV), PLQY 1-15 %), based on aminophosphine precursor chemistry. Ex-situ transamination of tris(dimethylamino)phosphine telluride with octylamine is confirmed by 31P NMR and yields a reactive tellurium precursor for the formation of 2D PbTe NPLs at temperatures as low as 0 {\deg}C. The PL position of the PbTe NPLs is unable by controlling the Pb:Te ration in the reaction. GIWAXS confirms the 2D geometry of the NPLs and the formation of superlattices. The importance of a post-synthetic passivation of the PbTe NPLs by PbI2 to ensure colloidal stability of the otherwise oxygen sensitive samples is supported by X-ray photoelectron spectroscopy. Our results expand and complete the row of lead chalcogenide-based 2D NPLs, opening up new ways for further pushing the optical properties of 2D NPLs into the infrared and toward technologically relevant wavelengths.

Transient Photoluminescence Microscopy (TPLM) allows for the direct visualization of carrier transport in semiconductor materials with sub nanosecond and few nanometer resolution. The technique is based on measuring changes in the spatial distribution of a diffraction limited population of carriers using spatiotemporal detection of the radiative decay of the carriers. The spatial resolution of TPLM is therefore primarily determined by the signal-to-noise-ratio (SNR). Here we present a method using cylindrical lenses to boost the signal acquisition in TPLM experiments. The resulting asymmetric magnification of the photoluminescence emission of the diffraction limited spot can increase the collection efficiency by more than a factor of 10, significantly reducing acquisition times and further boosting spatial resolution., Comment: 12 pages, 5 figures, and supporting information

Two-photon photopolymerization delivers prints without support structures and minimizes layering artifacts in a broad range of materials. This volumetric printing approach scans a focused light source throughout the entire volume of a resin vat and takes advantage of the quadratic power dependence of two photon absorption to produce photopolymerization exclusively at the focal point. While this approach has advantages, the widespread adoption of two photon photopolymerization is hindered by the need for expensive ultrafast lasers and extremely slow print speeds. Here we present an analogous quadratic process, triplet-triplet-annihilation-driven 3D printing, that enables volumetric printing at a focal point driven by <4 milliwatt-power continuous wave excitation. To induce photopolymerization deep within a vat, the key advance is the nanoencapsulation of photon upconversion solution within a silica shell decorated with solubilizing polymer ligands. This scalable self-assembly approach allows for scatter-free nanocapsule dispersal in a variety of organic media without leaking the capsule contents. We further introduce an excitonic strategy to systematically control the upconversion threshold to support either monovoxel or parallelized printing schemes, printing at power densities multiple orders of magnitude lower than power densities required for two-photon-based 3D printing. The application of upconversion nanocapsules to volumetric 3D printing provides access to the benefits of volumetric printing without the current cost, power, and speed drawbacks. The materials demonstrated here open opportunities for other triplet fusion upconversion-controlled applications.

Metal-halide perovskites are a versatile material platform for light-harvesting and light-emitting applications as their variable chemical composition allows the optoelectronic properties to be tailored to specific applications. Halide mixing is one of the most powerful techniques to tune the optical bandgap of metal-halide perovskites across wide spectral ranges. However, halide mixing has commonly been observed to result in phase segregation, which reduces excited-state transport and limits device performance. While the current emphasis lies on the development of strategies to prevent phase segregation, it remains unclear how halide mixing may affect excited-state transport even if phase purity is maintained. In this work, we study excitonic excited-state transport in phase pure mixed-halide 2D perovskites. Using transient photoluminescence microscopy, we show that, despite phase purity, halide mixing inhibits exciton transport in these materials. We find a significant reduction even for relatively low alloying concentrations, with bromide-rich perovskites being particularly sensitive to the introduction of iodide ions. Performing Brownian dynamics simulations, we are able to reproduce our experimental results and attribute the decrease in diffusivity to the energetically disordered potential landscape that arises due to the intrinsic random distribution of alloying sites. Our results suggest that even in the absence of phase segregation, halide mixing may still impact carrier transport due to the local intrinsic inhomogeneities in the energy landscape., Comment: 15 pages, 4 figures, and supporting information

Transient microscopy is of vital importance in understanding the dynamics of optical excited states in optoelectronic materials, as it allows for a direct visualization of the movement of energy carriers in space and time. Important information on the influence of trap-states can be obtained using this technique, typically observed as a slow-down of the energy transport as carriers are trapped at defect sites. To date, however, studies of the trap-state dynamics have been mostly limited to phenomenological descriptions of the early time-dynamics. In this report, we show how long-acquisition-time transient photoluminescence microscopy can be used to provide a detailed map of the trap-state landscape in 2D perovskites, in particular when used in combination with transient spectroscopy. We reveal anomalous spatial dynamics of excitons in 2D perovskites, which cannot be explained with existing models for trap limited exciton transport that only account for a single trap type. Instead, using a continuous diffusion model and performing Brownian dynamics simulations, we show that this behavior can be explained by accounting for a distinct distribution of traps in this material. Our results highlight the value of transient microscopy as a complementary tool to more common transient spectroscopy techniques in the characterization of the excited state dynamics in semiconductors., Comment: 20 pages, 4 figures, and supporting information

Metal halide perovskites are known to suffer from rapid degradation, limiting their direct applicability. Here, the degradation of phenethylammonium lead iodide (PEA2PbI4) two-dimensional perovskites under ambient conditions is studied using fluorescence, absorbance and fluorescence lifetime measurements. It is demonstrated that a long-term stability of two-dimensional perovskites can be achieved through the encapsulation with hexagonal boron nitride. While un-encapsulated perovskite flakes degrade within hours, the encapsulated perovskites are stable for at least three months. In addition, encapsulation considerably improves the stability under laser irradiation. The environmental stability, combined with the improved durability under illumination, is a critical ingredient for thorough spectroscopic studies of the intrinsic opto-electronic properties of this material platform., Comment: 10 pages, 4 figures, and supporting information

The fission of singlet excitons into triplet pairs in organic materials holds great technological promise, but the rational application of this phenomenon is hampered by a lack of understanding of its complex photophysics. Here, we use the controlled introduction of vacancies by means of spacer molecules in tetracene and pentacene thin films as a tuning parameter complementing experimental observables to identify the operating principles of different singlet fission pathways. Time-resolved spectroscopic measurements in combination with microscopic modelling enables us to demonstrate distinct scenarios, resulting from different singlet-to-triplet energy alignments. For exothermic fission, as found for pentacene, coherent mixing between the photoexcited singlet and triplet pair states is promoted by vibronic resonances, which drives the fission process with little sensitivity to the vacancy concentration. For endothermic materials, such as tetracene, the impossibility of such vibronic resonances renders fission fully incoherent; a process that is shown to slow down with vacancy concentration.

The isolation of air-sensitive two-dimensional (2D) materials and the race to achieve a better control of the interfaces in van der Waals heterostructures has pushed the scientific community towards the development of experimental setups that allow to exfoliate and transfer 2D materials under inert atmospheric conditions. These systems are typically based on over pressurized N2 of Ar gloveboxes that require the use of very thick gloves to operate within the chamber or the implementation of several motorized micro-manipulators. Here, we set up a deterministic transfer system for 2D materials within a gloveless anaerobic chamber. Unlike other setups based on over-pressurized gloveboxes, in our system the operator can manipulate the 2D materials within the chamber with bare hands. This experimental setup allows us to exfoliate 2D materials and to deterministically place them at a desired location with accuracy in a controlled O2-free and very low humidity (<2% RH) atmosphere. We illustrate the potential of this system to work with air-sensitive 2D materials by comparing the stability of black phosphorus and perovskite flakes inside and outside the anaerobic chamber., Comment: 6 main text figures, 7 supp. info. figures. 1 main text table with all the part numbers needed to assemble the setup

Two-dimensional perovskites, in which inorganic layers are stabilized by organic spacer molecules, are attracting increasing attention as a more robust analogue to the conventional three-dimensional metal-halide perovskites. However, reducing the perovskite dimensionality alters their optoelectronic properties dramatically, yielding excited states that are dominated by bound electron-hole pairs known as excitons, rather than by free charge carriers common to their bulk counterparts. Despite the growing interest in two-dimensional perovskites for both light harvesting and light emitting applications, the full impact of the excitonic nature on their optoelectronic properties remains unclear, particularly regarding the spatial dynamics of the excitons within the two-dimensional (2D) plane. Here, we present direct measurements of in-plane exciton transport in single-crystalline layered perovskites. Using time-resolved fluorescence microscopy, we show that excitons undergo an initial fast, intrinsic normal diffusion through the crystalline plane, followed by a transition to a slower subdiffusive regime as excitons get trapped. Interestingly, the early intrinsic exciton diffusivity depends sensitively on the exact composition of the perovskite, such as the choice of organic spacer. We attribute these changes in exciton transport properties to strong exciton-phonon interactions and the formation of large exciton-polarons. Our findings provide a clear design strategy to optimize exciton transport in these systems., Comment: 22 pages, 4 figures, and supporting information

The document serves as a reference for researchers trying to capture a large portion of a mass event on video for several hours, while using a very limited budget., Comment: 17 pages