Search

The methanol-burning lung model has been used as a technique for generating a predictable ratio of carbon dioxide production (V˙co 2) to oxygen consumption (V˙o 2) or respiratory quotient (RQ). Although an accurate RQ can be generated, quantitatively predictable and adjustableV˙o 2 andV˙co 2 cannot be generated. We describe a new burner device in which the combustion rate of methanol is always equal to the infusion rate of fuel over an extended range of O2 concentrations. This permits the assembly of a methanol-burning lung model that is usable with O2 concentrations up to 100% and provides continuously adjustable and quantitativeV˙o 2 (69–1,525 ml/min) and V˙co 2 (46–1,016 ml/min) at a RQ of 0.667.

Mass spectrometers are used in ICUs and ORs to measure the concentration of medical and anesthetic gases gathered from multiple sites. This investigation was designed to determine the accuracy of a clinical system, which included 12 ICU bedside stations monitored by a medical mass spectrometer (Perkin-Elmer RMS III, Pomona, CA). Each site station was connected to the analyzing unit via two Teflon tubes, one permanently installed, 30-m long, and the second disposable, 2.4-m long. A gas mixture containing 95% O2 and 5% CO2, alternating with room air, was delivered to a solenoid valve and from there to the connecting tubes. Gas flow-rate, delay time, rise time, and peak and trough concentrations were determined for each gas at solenoid cycling frequencies of 25, 50, and 100/min. After the first set of measurements, the 30-m tubes were thoroughly cleaned and all measurements repeated. In addition, the authors also measured CO2 delay and rise times when the gas was delivered to the mass spectrometer through an unused 30-m tube or a new 2.4-m tube. Gas flow-rate increased from 143 +/- 12 ml/min (mean +/- SD) to 238 +/- 9 ml/min after the tubes were cleaned. Delay time was identical for all gases at all solenoid cycling rates but decreased significantly (P less than 0.05), from 11.5 +/- 0.3 to 4.8 +/- 0.7 s after the ceiling tubes were cleaned. As solenoid valve rate increased, the difference between measured and actual gas concentration increased. The lowest accuracy was 63.6 +/- 2.1%, for CO2 at 100 cycles/min.(ABSTRACT TRUNCATED AT 250 WORDS)

ObjectivesThis study was designed to evaluate autonomic changes preceding atrial fibrillation/flutter (AF) after thoracotomy.BackgroundAutonomic fluctuations before the onset of postoperative AF have been reported but with conflicting results.MethodsIn 48 patients with postoperative AF, 2-h Holter recordings before the onset of AF were compared with corresponding data from 48 age- and gender-matched surgical controls without AF. Five-minute segments of heart rate variability (HRV) were studied using linear regression methods.ResultsThere was a near-significant trend for the RR interval among patients with AF to be lower than controls (p = 0.06), whereas the standard deviation of RRs (p < 0.0001), root mean square of successive RR differences (p < 0.0001), proportion of RRs >50 ms different (p < 0.0001), low-frequency power (p = 0.0003) and its log (p < 0.0001), and high-frequency-power (p < 0.0001) and its log (p < 0.0001) were all significantly greater in patients with AF, respectively. In comparison to controls, AF patients had a significant decrease in RR interval (p = 0.02) and significant increments in all time- and frequency-domain analyses studied.ConclusionsIn the period before the onset of postoperative AF, there are significant increases in HRV during a time when heart rate also increases. These novel findings are consistent with parasympathetic resurgence competing with increasing sympathetic activity as the triggering mechanism for postoperative AF.

Background: The mechanisms of atrial fibrillation/flutter (AF) after major thoracic surgery remain controversial. The goal of the present study was to evaluate autonomic changes preceding postoperative AF. Methods: In 48 patients with postoperative AF 2 h Halter recordings prior to the onset of AF were compared wth corresponding data from 48 ageand gender-matched surgical controls without AF. Five-minute segments of heart rate variability were studied using reoeated measwes ANOVA. Results: There was a near significant trend for the RR-interval among AF patients to be lower than controls IP=O.OE& while the standard deviation of RRs fP

To elucidate the delayed effects of midazolam, we assessed electrophysiologic and motor responses by measuring auditory event-related potentials and a button-press reaction time response in 10 normal volunteers (aged 25-36 yr). Fifty minutes after intravenous infusion of 0.07 mg/kg of midazolam, subjects were mildly sedated, oriented, and readily responsive to verbal commands. To obtain ERPs, frequent tones (85%: 1000 Hz) and rare tones (15%: 2500 Hz) were presented at intervals of 1.5 s. Electroencephalographic signals were collected from FZ, CZ, and PZ for 1000 ms after stimulus presentation until 40 artifact-free rare-tone responses were obtained (average time, 6 min). Peak-to-peak amplitudes and latencies for N2, P3, and the subsequent negative slow wave (N3) were averaged within condition and were analyzed by repeated measures analysis of variance. After midazolam infusion, there was a 50% decrease in amplitude of P3 in response to target tones (P less than 0.006), whereas N3 latency increased by 40 ms (P less than 0.05). Event-related potential amplitudes were still significantly larger to rare (target) stimuli (P less than 0.003) after midazolam infusion. Although reaction time increased by 70 ms (P = 0.031), performance accuracy remained unchanged. Self-ratings of sleepiness and concentration show that a significant sedation effect was still present 50 min after infusion. Although routine clinical examination may be normal, full recovery from the effects of a typical intravenous dose of midazolam requires more than 50 min. The potential for adverse drug interaction, particularly with narcotics, is still present at this time.

Since the introduction of the Electrosurgical Unit (ESU) as an effective tool in the OR and clinic, there has been a need to measure accurately the output of these devices in order to verify their safety, calibration, and performance. This article presents review of ESU measurement techniques, along with an analysis of their advantages and shortcomings. An alternative method is advanced that improves accuracy and resolution, provides extremely flexible selection of load resistance values and current measurement paths, and directly measures Crest Factor, a significant electrosurgical parameter.