Search

The sudden outage of a transformer due to a fault can cause irreparable damage to the electricity industry. Hence, by conducting momentarily inspections of the transformer's condition, faults can be promptly detected, and the transformer can be disconnected from the power grid to prevent subsequent failures in this equipment. Detecting faults at an early stage can also result in reduced repair costs. One recent promising technique for fault detection is Frequency Response Analysis (FRA), which compares the transformer's response in healthy and faulty conditions for understanding the occurrence of transformer faults. This paper presents a comprehensive and accurate modeling approach for the behavior of the transformer at different frequencies, followed by an exposition of the requirements for implementing this method in order to find the fault type, severity, and location. Additionally, various methods for analyzing the results of frequency response are introduced and discussed. In this regard, attempts have been made to introduce advanced complementary methods to address the weaknesses and limitations of the frequency response method. Finally, the concepts are summarized, and suggestions for further research with applications in this field are presented and compared., Electrical Sustainable Energy, Intelligent Electrical Power Grids

The connection of renewable energy sources (RESs) to the distribution network has been rising at a steady pace over the past decades. The great penetration of RESs such as grid-connected photovoltaic system brings new technical challenges to the distribution networks such as unintentional islanding. Conceptually, this situation occurs when a portion of the network that has been isolated from the main grid remains energised by the embedded RESs. This unexpected scenario should be thereby identified effectively to avoid frequency and voltage deviations and their hazardous effects. The aim of this paper is to provide a comprehensive review on the recently developed islanding detection methods for grid-following/grid-connected photovoltaic system, analyse their existing limitations, and suggest possible future research implementations. In this context, an in-depth comparison is provided considering the main features used in islanding detection methods such as non-detection zone, detection time, implementation cost and complexity, and power quality degradation. Finally, the main technical requirements established by the current grid codes are recalled identifying potential multi-functional approaches to expand the current islanding detection capabilities., Intelligent Electrical Power Grids

Islanding is a condition when distributed generators (DGs) are disconnected electrically from the upstream network. This unwanted situation should be detected effectively to ensure the safety of the maintenance staffs and power quality (PQ) requirements. This paper presents a new high PQ maximum power point tracking (MPPT)-based methodology for detecting the islanding operating mode of grid-connected photovoltaic systems (GCPVSs). In the recommended two-level scheme, a disturbance is injected into the MPPT algorithm under suspicious conditions, recognized by a passive criterion. This disturbance declines the DG active power output remarkably, drifting the output voltage beyond the minimum standard set in islanding state while its impact is negligible at the network presence. The effectiveness of the proposed technique has been evaluated through several hardware-in-the-loop simulations for a case study system, containing two power plant GCPVSs equipped with a pair of multi-functional relays. The results highlight precise islanding classification within 137 ms with the small non-detection zone. Moreover, the results of PQ analyses indicate acceptable total demand distortion and harmonic spectra of the output current in compliance with the existing standards under various DG power penetrations. Since the presented scheme diminishes the active power output in case of suspicious islanding events, its influence on GCPVS efficiency has been studied as well. The outputs underline that the efficiency drops by 0.52% whilst the disturbance is stimulated every minute of the time. It is finally concluded that the proposed technique provides a reliable islanding classification as well as insignificant degradation of PQ and efficiency., Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public., Intelligent Electrical Power Grids

This paper proposes a novel islanding detection method (IDM) for grid-connected photovoltaic systems (GCPVSs) through a disturbance injection in the maximum power point tracking (MPPT) algorithm. When an absolute deviation of the output voltage exceeds a threshold, the applied disturbance shifts system operating point from its maximum power point (MPP) condition. This leads to a sharp active power output reduction and consequently, a significant voltage drop in islanded mode beyond the standard voltage limit. The proposed algorithm is defined in a way that the distributed generator (DG) can be restored to MPP after islanding classification. It is thereby effective in microgrid in where the power injection at maximum level to cater the critical loads and maintain the stability of the isolated area are pursued. An intentional time delay has also been considered to avoid nuisance tripping in short-circuit faults which do not require tripping. The assessment of the proposed technique has been conducted for a sample network containing two GCPVSs in a real-time platform including actual relays in hardware-in-the-loop (HiL). The provided results under extensive islanding scenarios defined in islanding standards endorse timely and accurately detection with negligible non-detection zone (NDZ) as well as no false tripping in non-islanding disturbances. The comparative analysis of the presented scheme with a few recent IDMs for GCPVS highlights its overall superiorities, including very small NDZ, fast detection, thresholds self-standing determination, no adverse effect on power quality, and simple and inexpensive integration., Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public., Intelligent Electrical Power Grids

This article proposes a fast and reliable two-level islanding detection method (IDM) for grid-connected photovoltaic system (GCPVS)-based microgrid. In the first level of the proposed IDM, the magnitude of the rate of change of output voltage (ROCOV) is computed. If this variable exceeds a predefined threshold, a disturbance is injected into the duty cycle of DC/DC converter after a given time delay to deviate the system operating point away of its maximum power point (MPP) condition. This leads to a substantial active power output and voltage reduction in an islanded mode. Therefore, the ROCOV and the rate of change of active power output (ROCOP) indices, measured in the second stage, pose great negative sets at the same time in islanding states. However, the variation of at least one of these variables is near-zero in non-islanding switching events. The assessment of the presented algorithm has been conducted under extensive islanding and non-islanding scenarios for a case study system with two PV power plants using hardware-in-the-loop (HiL) simulation tests. The provided results remark precise islanding classification with an eminently small non-detection zone (NDZ) within 510 ms. The presented IDM has the advantages of self-standing thresholds determination, no improper effect on the output power quality, and simple and inexpensive structure. Moreover, the fast MPP restoration of the proposed scheme after islanding identification boosts the chance of seamless reconnection and DG autonomous operation in microgrid., Green Open Access added to TU Delft Institutional Repository ‘You share, we take care!’ – Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public., Intelligent Electrical Power Grids

High impedance faults (HIFs) are part of the most common faults in distribution power system. The randomness, non-linearity and unstable nature of these faults have resulted in false detection and a growing concern, due to the involvement of electrical arcs. Contrary to typical power system faults, HIFs are more likely to result in casualties and therefore, are treated with grave importance. Low current magnitude is witnessed to be overcurrent relays biggest weakness and the main reason of conventional methods failure. In the presented paper, a new Fourier based detection scheme has been proposed. By designing two independent parallel algorithms, focusing on abnormal conditions and HIF signatures, this method benefits from simplicity, low computational burden and high accuracy in comparison to other conventional methods. Simulation of an IEEE standard distribution system has provided proof to this claim. Needles of extra equipment installation has also made the proposed method financially reasonable.