Search

Future cosmic microwave background (CMB) experiments are primarily targeting a detection of the primordial $B$-mode polarisation. The faintness of this signal requires exquisite control of systematic effects which may bias the measurements. In this work, we derive requirements on the relative calibration accuracy of the overall polarisation gain ($\Delta g_\nu$) for LiteBIRD experiment, through the application of the blind Needlet Internal Linear Combination (NILC) foreground-cleaning method. We find that minimum variance techniques, as NILC, are less affected by gain calibration uncertainties than a parametric approach, which requires a proper modelling of these instrumental effects. The tightest constraints are obtained for frequency channels where the CMB signal is relatively brighter (166 GHz channel, $\Delta {g}_\nu \approx 0.16 \%$), while, with a parametric approach, the strictest requirements were on foreground-dominated channels. We then propagate gain calibration uncertainties, corresponding to the derived requirements, into all frequency channels simultaneously. We find that the overall impact on the estimated $r$ is lower than the required budget for LiteBIRD by almost a factor $5$. The adopted procedure to derive requirements assumes a simple Galactic model. We therefore assess the robustness of obtained results against more realistic scenarios by injecting the gain calibration uncertainties, according to the requirements, into LiteBIRD simulated maps and assuming intermediate- and high-complexity sky models. In this case, we employ the so-called Multi-Clustering NILC (MC-NILC) foreground-cleaning pipeline and obtain that the impact of gain calibration uncertainties on $r$ is lower than the LiteBIRD gain systematics budget for the intermediate-complexity sky model. For the high-complexity case, instead, it would be necessary to tighten the requirements by a factor $1.8$., Comment: 29 pages, 11 figures

We study the effects due to mismatches in passbands, polarization angles, and temperature and polarization calibrations in the context of the upcoming cosmic microwave background experiment Simons Observatory (SO). Using the SO multi-frequency likelihood, we estimate the bias and the degradation of constraining power in cosmological and astrophysical foreground parameters assuming different levels of knowledge of the instrumental effects. We find that incorrect but reasonable assumptions about the values of all the systematics examined here can have significant effects on cosmological analyses, hence requiring marginalization approaches at the likelihood level. When doing so, we find that the most relevant effect is due to bandpass shifts. When marginalizing over them, the posteriors of parameters describing astrophysical microwave foregrounds (such as radio point sources or dust) get degraded, while cosmological parameters constraints are not significantly affected. Marginalization over polarization angles with up to 0.25$^\circ$ uncertainty causes an irrelevant bias $\lesssim 0.05 \sigma$ in all parameters. Marginalization over calibration factors in polarization broadens the constraints on the effective number of relativistic degrees of freedom $N_\mathrm{eff}$ by a factor 1.2, interpreted here as a proxy parameter for non standard model physics targeted by high-resolution CMB measurements., Comment: 61 pages (27 of which are appendices), 26 figures, 12 tables. (Replacement to update the acknowledgments)

We present a study of the impact of an uncertainty in the beam far side-lobe knowledge on the measurement of the Cosmic Microwave Background $B$-mode signal at large scale. It is expected to be one of the main source of systematic effects in future CMB observations. Because it is crucial for all-sky survey missions to take into account the interplays between beam systematic effects and all the data analysis steps, the primary goal of this paper is to provide the methodology to carry out the end-to-end study of their effect for a space-borne CMB polarization experiment, up to the cosmological results in the form of a bias $\delta r$ on the tensor-to-scalar ratio $r$. LiteBIRD is dedicated to target the measurement of CMB primordial $B$ modes by reaching a sensitivity of $\sigma \left( r \right) \leq 10^{-3}$ assuming $r=0$. As a demonstration of our framework, we derive the relationship between the knowledge of the beam far side-lobes and the tentatively allocated error budget under given assumptions on design, simulation and component separation method. We assume no mitigation of the far side-lobes effect at any stage of the analysis pipeline. We show that $\delta r$ is mostly due to the integrated fractional power difference between the estimated beams and the true beams in the far side-lobes region, with little dependence on the actual shape of the beams, for low enough $\delta r$. Under our set of assumptions, in particular considering the specific foreground cleaning method we used, we find that the integrated fractional power in the far side-lobes should be known at a level as tight as $\sim 10^{-4}$, to achieve the required limit on the bias $\delta r < 1.9 \times 10^{-5}$. The framework and tools developed for this study can be easily adapted to provide requirements under different design, data analysis frameworks and for other future space-borne experiments beyond LiteBIRD.

We estimate the efficiency of mitigating the lensing $B$-mode polarization, the so-called delensing, for the $LiteBIRD$ experiment with multiple external data sets of lensing-mass tracers. The current best bound on the tensor-to-scalar ratio, $r$, is limited by lensing rather than Galactic foregrounds. Delensing will be a critical step to improve sensitivity to $r$ as measurements of $r$ become more and more limited by lensing. In this paper, we extend the analysis of the recent $LiteBIRD$ forecast paper to include multiple mass tracers, i.e., the CMB lensing maps from $LiteBIRD$ and CMB-S4-like experiment, cosmic infrared background, and galaxy number density from $Euclid$- and LSST-like survey. We find that multi-tracer delensing will further improve the constraint on $r$ by about $20\%$. In $LiteBIRD$, the residual Galactic foregrounds also significantly contribute to uncertainties of the $B$-modes, and delensing becomes more important if the residual foregrounds are further reduced by an improved component separation method., Comment: 21 pages, 7 figures

We explore the capability of measuring lensing signals in $LiteBIRD$ full-sky polarization maps. With a $30$ arcmin beam width and an impressively low polarization noise of $2.16\,\mu$K-arcmin, $LiteBIRD$ will be able to measure the full-sky polarization of the cosmic microwave background (CMB) very precisely. This unique sensitivity also enables the reconstruction of a nearly full-sky lensing map using only polarization data, even considering its limited capability to capture small-scale CMB anisotropies. In this paper, we investigate the ability to construct a full-sky lensing measurement in the presence of Galactic foregrounds, finding that several possible biases from Galactic foregrounds should be negligible after component separation by harmonic-space internal linear combination. We find that the signal-to-noise ratio of the lensing is approximately $40$ using only polarization data measured over $90\%$ of the sky. This achievement is comparable to $Planck$'s recent lensing measurement with both temperature and polarization and represents a four-fold improvement over $Planck$'s polarization-only lensing measurement. The $LiteBIRD$ lensing map will complement the $Planck$ lensing map and provide several opportunities for cross-correlation science, especially in the northern hemisphere.

We study the possibility of using the $LiteBIRD$ satellite $B$-mode survey to constrain models of inflation producing specific features in CMB angular power spectra. We explore a particular model example, i.e. spectator axion-SU(2) gauge field inflation. This model can source parity-violating gravitational waves from the amplification of gauge field fluctuations driven by a pseudoscalar "axionlike" field, rolling for a few e-folds during inflation. The sourced gravitational waves can exceed the vacuum contribution at reionization bump scales by about an order of magnitude and can be comparable to the vacuum contribution at recombination bump scales. We argue that a satellite mission with full sky coverage and access to the reionization bump scales is necessary to understand the origin of the primordial gravitational wave signal and distinguish among two production mechanisms: quantum vacuum fluctuations of spacetime and matter sources during inflation. We present the expected constraints on model parameters from $LiteBIRD$ satellite simulations, which complement and expand previous studies in the literature. We find that $LiteBIRD$ will be able to exclude with high significance standard single-field slow-roll models, such as the Starobinsky model, if the true model is the axion-SU(2) model with a feature at CMB scales. We further investigate the possibility of using the parity-violating signature of the model, such as the $TB$ and $EB$ angular power spectra, to disentangle it from the standard single-field slow-roll scenario. We find that most of the discriminating power of $LiteBIRD$ will reside in $BB$ angular power spectra rather than in $TB$ and $EB$ correlations., Comment: 22 pages, 13 figures. Submitted to JCAP

Recovering the polarized cosmic microwave background (CMB) is crucial for shading light on Cosmic Inflation. Methods with different characteristics should be developed and optimized. We aim to use a neural network called CENN and train it for recovering the E and B modes of the CMB. We train the network with realistic simulations of 256x256 pixel squared patches at 100, 143 and 217 GHz Planck channels, which contain the CMB, thermal dust, synchrotron, PS and noise. We make several trainings sets: 30, 25 and 20 arcmin resolution patches at the same position in the sky. After being trained, CENN is able to recover the CMB signal at 143 GHz in Q and U patches. Then, we use NaMaster for estimating the EE and BB power spectrum for each input and output patches in the test dataset, as well as the difference between input and output power spectra and the residuals. We also test the methodology using a different foreground model at 5 arcmin resolution without noise. We recover the E-mode generally founding residuals bellow the input signal at all scales. In particular, we found a value of about 0.1 muK2 at l<200, decreasing below 0.01 muK2 at smaller scales. For the B-mode, we similarly recover the CMB with residuals between 0.01 and 0.001 muK2. We also train the network with 5 arcmin Planck simulations without noise, obtaining clearly better results with respect the previous cases. For a different foreground model, the recovery is similar, although B-mode residuals increase above the input signal. In general, we found that, the network performs better when training with the same resolution used for testing. Based on the results, CENN seems to be a promising for recovering both E and B modes at sub-degree scales in ground-base experiments such as POLARBEAR, SO and CMB-S4. Once extending its applicability at all sky, it could be an alternative component separation method for LiteBIRD satellite., Comment: 11 pages, 10 figures, Submitted to A&A

We propose a new conceptual approach to reach unattained dissipative properties based on the friction of slender concentric sliding columns. We begin by searching for the optimal topology in the simplest telescopic system of two concentric columns. Interestingly, we obtain that the optimal shape parameters are material independent and scale invariant. Based on a multiscale self-similar reconstruction, we end-up with a theoretical optimal fractal limit system whose cross section resembles the classical Sierpi\'nski triangle. Our optimal construction is finally completed by considering the possibility of a complete plane tessellation. The direct comparison of the dissipation per unit volume with the material dissipation up to the elastic limit shows a great advantage: . Such result is already attained for a realistic case of three only scales of refinement leading almost (96%) the same dissipation of the fractal limit. We also show the possibility of easy recovering of the original configuration after dissipation and we believe that our schematic system can have interesting reliable applications in different technological fields. Interestingly, our multiscale dissipative mechanism is reminiscent of similar strategies observed in nature as a result of bioadaptation such as in the archetypical cases of bone, nacre and spider silk. Even though other phenomena such as inelastic behavior and full tridimensional optimization are surely important in such biological systems, we believe that the suggested dissipation mechanism and scale invariance properties can give insight also in the hierarchical structures observed in important biological examples.

We measure the polarization fraction of a sample of $6282$ Galactic cold clumps at $353 \, \mathrm{GHz} $, consisting of $Planck$ Galactic cold clump (PGCC) catalogue category 1 objects (flux densities measured with signal-to-noise ratio $(\mathrm{S/N}) > 4$). We find the mean-squared polarization fraction at $353 \, \mathrm{GHz} $ to be $ \langle \Pi ^ 2 \rangle = [ 4.79 \pm 0.44 ] \times 10 ^ {-4} $ equating to an $ 11 \, \sigma $ detection of polarization. We test if the polarization fraction depends on the clumps' physical properties, including flux density, luminosity, Galactic latitude and physical distance. We see a trend towards increasing polarization fraction with increasing Galactic latitude, but find no evidence that polarization depends on the other tested properties. The Simons Observatory, with an angular resolution of order $1 \, \mathrm{arcmin } $ and noise levels between $22$ and $54$ $ \mu \mathrm{ K-arcmin } $ at high frequencies, will substantially enhance our ability to determine the magnetic field structure in Galactic cold clumps. At $\ge5\,\sigma$ significance, we predict the Simons Observatory will detect at least $\sim12,000$ cold clumps in intensity and $\sim430$ cold clumps in polarization. This number of polarization detections would represent a two orders of magnitude increase over the current $Planck$ results. We also release software that can be used to mask these Galactic cold clumps in other analyses., Comment: 12 pages, 12 figures, accepted by MNRAS; section 5 number counts revised and improved

LiteBIRD is a planned JAXA-led CMB B-mode satellite experiment aiming for launch in the late 2020s, with a primary goal of detecting the imprint of primordial inflationary gravitational waves. Its current baseline focal-plane configuration includes 15 frequency bands between 40 and 402 GHz, fulfilling the mission requirements to detect the amplitude of gravitational waves with the total uncertainty on the tensor-to-scalar ratio, $\delta r$, down to $\delta r<0.001$. A key aspect of this performance is accurate astrophysical component separation, and the ability to remove polarized thermal dust emission is particularly important. In this paper we note that the CMB frequency spectrum falls off nearly exponentially above 300 GHz relative to the thermal dust SED, and a relatively minor high frequency extension can therefore result in even lower uncertainties and better model reconstructions. Specifically, we compare the baseline design with five extended configurations, while varying the underlying dust modeling, in each of which the HFT (High-Frequency Telescope) frequency range is shifted logarithmically towards higher frequencies, with an upper cutoff ranging between 400 and 600 GHz. In each case, we measure the tensor-to-scalar ratio $r$ uncertainty and bias using both parametric and minimum-variance component-separation algorithms. When the thermal dust sky model includes a spatially varying spectral index and temperature, we find that the statistical uncertainty on $r$ after foreground cleaning may be reduced by as much as 30--50 % by extending the upper limit of the frequency range from 400 to 600 GHz, with most of the improvement already gained at 500 GHz. We also note that a broader frequency range leads to better ability to discriminate between models through higher $\chi^2$ sensitivity. (abridged), Comment: 18 pages, 13 figures. Published in A&A

We present on the status of POLARBEAR-2 A (PB2-A) focal plane fabrication. The PB2-A is the first of three telescopes in the Simon Array (SA), which is an array of three cosmic microwave background (CMB) polarization sensitive telescopes located at the POLARBEAR (PB) site in Northern Chile. As the successor to the PB experiment, each telescope and receiver combination is named as PB2-A, PB2-B, and PB2-C. PB2-A and -B will have nearly identical receivers operating at 90 and 150 GHz while PB2-C will house a receiver operating at 220 and 270 GHz. Each receiver contains a focal plane consisting of seven close-hex packed lenslet coupled sinuous antenna transition edge sensor bolometer arrays. Each array contains 271 di-chroic optical pixels each of which have four TES bolometers for a total of 7588 detectors per receiver. We have produced a set of two types of candidate arrays for PB2-A. The first we call Version 11 (V11) and uses a silicon oxide (SiOx) for the transmission lines and cross-over process for orthogonal polarizations. The second we call Version 13 (V13) and uses silicon nitride (SiNx) for the transmission lines and cross-under process for orthogonal polarizations. We have produced enough of each type of array to fully populate the focal plane of the PB2-A receiver. The average wirebond yield for V11 and V13 arrays is 93.2% and 95.6% respectively. The V11 arrays had a superconducting transition temperature (Tc) of 452 +/- 15 mK, a normal resistance (Rn) of 1.25 +/- 0.20 Ohms, and saturations powers of 5.2 +/- 1.0 pW and 13 +/- 1.2 pW for the 90 and 150 GHz bands respectively. The V13 arrays had a superconducting transition temperature (Tc) of 456 +/-6 mK, a normal resistance (Rn) of 1.1 +/- 0.2 Ohms, and saturations powers of 10.8 +/- 1.8 pW and 22.9 +/- 2.6 pW for the 90 and 150 GHz bands respectively.

By extending the classical Peyrard-Bishop model, we are able to obtain a fully analytical description for the mechanical resistance of DNA under stretching at variable values of temperature, number of base pairs and intrachains and interchains bonds stiffness. In order to compare elasticity and temperature effects, we first analyze the system in the zero temperature mechanical limit, important to describe several experimental effects including possible hysteresis. We then analyze temperature effects in the framework of equilibrium statistical mechanics. In particular, we obtain an analytical expression for the temperature dependent melting force and unzipping assigned displacement in the thermodynamical limit, also depending on the relative stability of intra vs inter molecular bonds. Such results coincide with the purely mechanical model in the limit of zero temperature and with the denaturation temperature that we obtain with the classical transfer integral method. Based on our analytical results, explicit analysis of the phase diagrams and cooperativity parameters are obtained, where also discreteness effect can be accounted for. The obtained results are successfully applied in reproducing the thermomechanical experimental melting of DNA and the response of DNA hairpins. Due to its generality, the proposed approach can be extended to other thermomechanically induced molecular melting phenomena.

LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. The Japan Aerospace Exploration Agency (JAXA) selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with an expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD is planned to orbit the Sun-Earth Lagrangian point L2, where it will map the cosmic microwave background (CMB) polarization over the entire sky for three years, with three telescopes in 15 frequency bands between 34 and 448 GHz, to achieve an unprecedented total sensitivity of 2.2$\mu$K-arcmin, with a typical angular resolution of 0.5$^\circ$ at 100 GHz. The primary scientific objective of LiteBIRD is to search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. We provide an overview of the LiteBIRD project, including scientific objectives, mission and system requirements, operation concept, spacecraft and payload module design, expected scientific outcomes, potential design extensions and synergies with other projects., Comment: 155 pages, accepted for publication in PTEP

A methodology to provide the polarization angle requirements for different sets of detectors, at a given frequency of a CMB polarization experiment, is presented. The uncertainties in the polarization angle of each detector set are related to a given bias on the tensor-to-scalar ratio $r$ parameter. The approach is grounded in using a linear combination of the detector sets to obtain the CMB polarization signal. In addition, assuming that the uncertainties on the polarization angle are in the small angle limit (lower than a few degrees), it is possible to derive analytic expressions to establish the requirements. The methodology also accounts for possible correlations among detectors, that may originate from the optics, wafers, etc. The approach is applied to the LiteBIRD space mission. We show that, for the most restrictive case (i.e., full correlation of the polarization angle systematics among detector sets), the requirements on the polarization angle uncertainties are of around 1 arcmin at the most sensitive frequency bands (i.e., $\approx 150$ GHz) and of few tens of arcmin at the lowest (i.e., $\approx 40$ GHz) and highest (i.e., $\approx 400$ GHz) observational bands. Conversely, for the least restrictive case (i.e., no correlation of the polarization angle systematics among detector sets), the requirements are $\approx 5$ times less restrictive than for the previous scenario. At the global and the telescope levels, polarization angle knowledge of a few arcmins is sufficient for correlated global systematic errors and can be relaxed by a factor of two for fully uncorrelated errors in detector polarization angle. The reported uncertainty levels are needed in order to have the bias on $r$ due to systematics below the limit established by the LiteBIRD collaboration., Comment: 26 pages, 6 figures. Minor changes to match the final version in JCAP

We present a demonstration of the in-flight polarization angle calibration for the JAXA/ISAS second strategic large class mission, LiteBIRD, and estimate its impact on the measurement of the tensor-to-scalar ratio parameter, r, using simulated data. We generate a set of simulated sky maps with CMB and polarized foreground emission, and inject instrumental noise and polarization angle offsets to the 22 (partially overlapping) LiteBIRD frequency channels. Our in-flight angle calibration relies on nulling the EB cross correlation of the polarized signal in each channel. This calibration step has been carried out by two independent groups with a blind analysis, allowing an accuracy of the order of a few arc-minutes to be reached on the estimate of the angle offsets. Both the corrected and uncorrected multi-frequency maps are propagated through the foreground cleaning step, with the goal of computing clean CMB maps. We employ two component separation algorithms, the Bayesian-Separation of Components and Residuals Estimate Tool (B-SeCRET), and the Needlet Internal Linear Combination (NILC). We find that the recovered CMB maps obtained with algorithms that do not make any assumptions about the foreground properties, such as NILC, are only mildly affected by the angle miscalibration. However, polarization angle offsets strongly bias results obtained with the parametric fitting method. Once the miscalibration angles are corrected by EB nulling prior to the component separation, both component separation algorithms result in an unbiased estimation of the r parameter. While this work is motivated by the conceptual design study for LiteBIRD, its framework can be broadly applied to any CMB polarization experiment. In particular, the combination of simulation plus blind analysis provides a robust forecast by taking into account not only detector sensitivity but also systematic effects., Comment: Submitted to JCAP

LiteBIRD is a JAXA-led Strategic Large-Class mission designed to search for the existence of the primordial gravitational waves produced during the inflationary phase of the Universe, through the measurements of their imprint onto the polarization of the cosmic microwave background (CMB). These measurements, requiring unprecedented sensitivity, will be performed over the full sky, at large angular scales, and over 15 frequency bands from 34GHz to 448GHz. The LiteBIRD instruments consist of three telescopes, namely the Low-, Medium- and High-Frequency Telescope (respectively LFT, MFT and HFT). We present in this paper an overview of the design of the Medium-Frequency Telescope (89-224GHz) and the High-Frequency Telescope (166-448GHz), the so-called MHFT, under European responsibility, which are two cryogenic refractive telescopes cooled down to 5K. They include a continuous rotating half-wave plate as the first optical element, two high-density polyethylene (HDPE) lenses and more than three thousand transition-edge sensor (TES) detectors cooled to 100mK. We provide an overview of the concept design and the remaining specific challenges that we have to face in order to achieve the scientific goals of LiteBIRD., Comment: SPIE Conference

LiteBIRD, the Lite (Light) satellite for the study of B-mode polarization and Inflation from cosmic background Radiation Detection, is a space mission for primordial cosmology and fundamental physics. JAXA selected LiteBIRD in May 2019 as a strategic large-class (L-class) mission, with its expected launch in the late 2020s using JAXA's H3 rocket. LiteBIRD plans to map the cosmic microwave background (CMB) polarization over the full sky with unprecedented precision. Its main scientific objective is to carry out a definitive search for the signal from cosmic inflation, either making a discovery or ruling out well-motivated inflationary models. The measurements of LiteBIRD will also provide us with an insight into the quantum nature of gravity and other new physics beyond the standard models of particle physics and cosmology. To this end, LiteBIRD will perform full-sky surveys for three years at the Sun-Earth Lagrangian point L2 for 15 frequency bands between 34 and 448 GHz with three telescopes, to achieve a total sensitivity of 2.16 micro K-arcmin with a typical angular resolution of 0.5 deg. at 100GHz. We provide an overview of the LiteBIRD project, including scientific objectives, mission requirements, top-level system requirements, operation concept, and expected scientific outcomes., Comment: 20 pages, 9 figures

LiteBIRD has been selected as JAXA's strategic large mission in the 2020s, to observe the cosmic microwave background (CMB) $B$-mode polarization over the full sky at large angular scales. The challenges of LiteBIRD are the wide field-of-view (FoV) and broadband capabilities of millimeter-wave polarization measurements, which are derived from the system requirements. The possible paths of stray light increase with a wider FoV and the far sidelobe knowledge of $-56$ dB is a challenging optical requirement. A crossed-Dragone configuration was chosen for the low frequency telescope (LFT : 34--161 GHz), one of LiteBIRD's onboard telescopes. It has a wide field-of-view ($18^\circ \times 9^\circ$) with an aperture of 400 mm in diameter, corresponding to an angular resolution of about 30 arcminutes around 100 GHz. The focal ratio f/3.0 and the crossing angle of the optical axes of 90$^\circ$ are chosen after an extensive study of the stray light. The primary and secondary reflectors have rectangular shapes with serrations to reduce the diffraction pattern from the edges of the mirrors. The reflectors and structure are made of aluminum to proportionally contract from warm down to the operating temperature at $5\,$K. A 1/4 scaled model of the LFT has been developed to validate the wide field-of-view design and to demonstrate the reduced far sidelobes. A polarization modulation unit (PMU), realized with a half-wave plate (HWP) is placed in front of the aperture stop, the entrance pupil of this system. A large focal plane with approximately 1000 AlMn TES detectors and frequency multiplexing SQUID amplifiers is cooled to 100 mK. The lens and sinuous antennas have broadband capability. Performance specifications of the LFT and an outline of the proposed verification plan are presented., Comment: 21 pages, 14 figures

Recent developments of transition-edge sensors (TESs), based on extensive experience in ground-based experiments, have been making the sensor techniques mature enough for their application on future satellite CMB polarization experiments. LiteBIRD is in the most advanced phase among such future satellites, targeting its launch in Japanese Fiscal Year 2027 (2027FY) with JAXA's H3 rocket. It will accommodate more than 4000 TESs in focal planes of reflective low-frequency and refractive medium-and-high-frequency telescopes in order to detect a signature imprinted on the cosmic microwave background (CMB) by the primordial gravitational waves predicted in cosmic inflation. The total wide frequency coverage between 34GHz and 448GHz enables us to extract such weak spiral polarization patterns through the precise subtraction of our Galaxy's foreground emission by using spectral differences among CMB and foreground signals. Telescopes are cooled down to 5Kelvin for suppressing thermal noise and contain polarization modulators with transmissive half-wave plates at individual apertures for separating sky polarization signals from artificial polarization and for mitigating from instrumental 1/f noise. Passive cooling by using V-grooves supports active cooling with mechanical coolers as well as adiabatic demagnetization refrigerators. Sky observations from the second Sun-Earth Lagrangian point, L2, are planned for three years. An international collaboration between Japan, USA, Canada, and Europe is sharing various roles. In May 2019, the Institute of Space and Astronautical Science (ISAS), JAXA selected LiteBIRD as the strategic large mission No. 2., Comment: Journal of Low Temperature Physics, in press

We present a measurement of the $B$-mode polarization power spectrum of the cosmic microwave background (CMB) using taken from July 2014 to December 2016 with the POLARBEAR experiment. The CMB power spectra are measured using observations at 150 GHz with an instantaneous array sensitivity of $\mathrm{NET}_\mathrm{array}=23\, \mu \mathrm{K} \sqrt{\mathrm{s}}$ on a 670 square degree patch of sky centered at (RA, Dec)=($+0^\mathrm{h}12^\mathrm{m}0^\mathrm{s},-59^\circ18^\prime$). A continuously rotating half-wave plate is used to modulate polarization and to suppress low-frequency noise. We achieve $32\,\mu\mathrm{K}$-$\mathrm{arcmin}$ effective polarization map noise with a knee in sensitivity of $\ell = 90$, where the inflationary gravitational wave signal is expected to peak. The measured $B$-mode power spectrum is consistent with a $\Lambda$CDM lensing and single dust component foreground model over a range of multipoles $50 \leq \ell \leq 600$. The data disfavor zero $C_\ell^{BB}$ at $2.2\sigma$ using this $\ell$ range of POLARBEAR data alone. We cross-correlate our data with Planck high frequency maps and find the low-$\ell$ $B$-mode power in the combined dataset to be consistent with thermal dust emission. We place an upper limit on the tensor-to-scalar ratio $r < 0.90$ at 95% confidence level after marginalizing over foregrounds.

Using only cosmic microwave background polarization data from the POLARBEAR experiment, we measure $B$-mode polarization delensing on subdegree scales at more than $5\sigma$ significance. We achieve a 14% $B$-mode power variance reduction, the highest to date for internal delensing, and improve this result to 2% by applying for the first time an iterative maximum a posteriori delensing method. Our analysis demonstrates the capability of internal delensing as a means of improving constraints on inflationary models, paving the way for the optimal analysis of next-generation primordial $B$-mode experiments., Comment: Matches version published in Physical Review Letters

The Probe of Inflation and Cosmic Origins (PICO) is a proposed probe-scale space mission consisting of an imaging polarimeter operating in frequency bands between 20 and 800 GHz. We describe the science achievable by PICO, which has sensitivity equivalent to more than 3300 Planck missions, the technical implementation, the schedule and cost., Comment: APC White Paper submitted to the Astro2020 decadal panel; 10 page version of the 50 page mission study report arXiv:1902.10541

We deduce a fully analytical model to predict the artifacts of the measuring device handles in Single Molecule Force Spectroscopy experiments. As we show, neglecting the effects of the handle stiffness can lead to crucial overestimation or underestimation of the stability properties and transition thresholds of macromolecules.

We report a 4.8$\sigma$ measurement of the cross-correlation signal between the cosmic microwave background (CMB) lensing convergence reconstructed from measurements of the CMB polarization made by the POLARBEAR experiment and the infrared-selected galaxies of the Herschel-ATLAS survey. This is the first measurement of its kind. We infer a best-fit galaxy bias of $b = 5.76 \pm 1.25$, corresponding to a host halo mass of $\log_{10}(M_h/M_\odot) =13.5^{+0.2}_{-0.3}$ at an effective redshift of $z \sim 2$ from the cross-correlation power spectrum. Residual uncertainties in the redshift distribution of the sub-mm galaxies are subdominant with respect to the statistical precision. We perform a suite of systematic tests, finding that instrumental and astrophysical contaminations are small compared to the statistical error. This cross-correlation measurement only relies on CMB polarization information that, differently from CMB temperature maps, is less contaminated by galactic and extra-galactic foregrounds, providing a clearer view of the projected matter distribution. This result demonstrates the feasibility and robustness of this approach for future high-sensitivity CMB polarization experiments., Comment: 14 pages, 6 figures, updated to match published version on ApJ

Single-molecule stretching experiments on DNA, RNA, and other biological macromolecules opened up the possibility of an impressive progress in many fields of Life and Medical sciences. The reliability of such experiments may be crucially limited by the possibility of determining the influence of the apparatus on the experimental outputs. Here we deduce an analytical model that we show to be coherent with previous numerical results and that quantitively reproduce AFM experimental tests on titin macromolecules and P-selectin AFM experiments with variable probe stiffnesses. We believe that the obtained analytical description can represent an important step forward in the interpretation of Single Molecule Force Spectroscopy experiments and intermolecular interactions phenomena.

We combine the latest datasets obtained with different surveys to study the frequency dependence of polarized emission coming from Extragalactic Radio Sources (ERS). We consider data over a very wide frequency range starting from $1.4$ GHz up to $217$ GHz. This range is particularly interesting since it overlaps the frequencies of the current and forthcoming Cosmic Microwave Background (\cmb) experiments. Current data suggest that at high radio frequencies, ($ \nu \geq 20$ GHz) the fractional polarization of ERS does not depend on the total flux density. Conversely, recent datasets indicate a moderate increase of polarization fraction as a function of frequency, physically motivated by the fact that Faraday depolarization is expected to be less relevant at high radio-frequencies. We compute ERS number counts using updated models based on recent data, and we forecast the contribution of unresolved ERS in CMB polarization spectra. Given the expected sensitivities and the observational patch sizes of forthcoming \cmb\ experiments about $\sim 200 $ ( up to $\sim 2000 $ ) polarized ERS are expected to be detected. Finally, we assess that polarized ERS can contaminate the cosmological B-mode polarization if the tensor-to-scalar ratio is $r< 0.05$ and they have to be robustly controlled to de-lens \cmb\ B-modes at the arcminute angular scales., Comment: 14 pages, 14 figures, 6 tables; AAS received 26th December,2017

In this paper we study the diffusely observed occurrence of Fractality and Self-organized Criticality in mechanical systems. We analytically show, based on a prototypical compressed tensegrity structure, that these phenomena can be viewed as the result of the contemporary attainment of mass minimization and global stability in elastic systems.

We propose a model for the mechanical behavior of protein materials. Based on a limited number of experimental macromolecular parameters (persistence and contour lengths, rate of unfolding dissipation) we obtain the macroscopic behavior of keratin fibers (human, cow, and rabbit hair), taking into account the damage and residual stretches effects which are fundamental in many functions of life. We support our theoretical results by showing that our model is robust and able to reproduce with high quantitive accuracy the cyclic experimental behavior of different keratinous protein materials we tested. We also show the capability of describing, even if with lower precision, the dissipation and permanent strain effects in spider silks.

We report an improved measurement of the cosmic microwave background (CMB) $B$-mode polarization power spectrum with the POLARBEAR experiment at 150 GHz. By adding new data collected during the second season of observations (2013-2014) to re-analyzed data from the first season (2012-2013), we have reduced twofold the band-power uncertainties. The band powers are reported over angular multipoles $500 \leq \ell \leq 2100$, where the dominant $B$-mode signal is expected to be due to the gravitational lensing of $E$-modes. We reject the null hypothesis of no $B$-mode polarization at a confidence of 3.1$\sigma$ including both statistical and systematic uncertainties. We test the consistency of the measured $B$-modes with the $\Lambda$ Cold Dark Matter ($\Lambda$CDM) framework by fitting for a single lensing amplitude parameter $A_L$ relative to the Planck best-fit model prediction. We obtain $A_L = 0.60 ^{+0.26} _{-0.24} ({\rm stat}) ^{+0.00} _{-0.04}({\rm inst}) \pm 0.14 ({\rm foreground}) \pm 0.04 ({\rm multi})$, where $A_{L}=1$ is the fiducial $\Lambda$CDM value, and the details of the reported uncertainties are explained later in the manuscript., Comment: 16 pages, 10 figures. Minor changes to match the published version. For data and figures, see http://bolo.berkeley.edu/polarbear/data/polarbear_BB_2017/

POLARBEAR-2 (PB-2) is a cosmic microwave background (CMB) polarization experiment that will be located in the Atacama highland in Chile at an altitude of 5200 m. Its science goals are to measure the CMB polarization signals originating from both primordial gravitational waves and weak lensing. PB-2 is designed to measure the tensor to scalar ratio, r, with precision {\sigma}(r) < 0.01, and the sum of neutrino masses, {\Sigma}m{\nu}, with {\sigma}({\Sigma}m{\nu}) < 90 meV. To achieve these goals, PB-2 will employ 7588 transition-edge sensor bolometers at 95 GHz and 150 GHz, which will be operated at the base temperature of 250 mK. Science observations will begin in 2017., Comment: 9pages,8figures

Atmosphere is one of the most important noise sources for ground-based cosmic microwave background (CMB) experiments. By increasing optical loading on the detectors, it amplifies their effective noise, while its fluctuations introduce spatial and temporal correlations between detected signals. We present a physically motivated 3d-model of the atmosphere total intensity emission in the millimeter and sub-millimeter wavelengths. We derive a new analytical estimate for the correlation between detectors time-ordered data as a function of the instrument and survey design, as well as several atmospheric parameters such as wind, relative humidity, temperature and turbulence characteristics. Using an original numerical computation, we examine the effect of each physical parameter on the correlations in the time series of a given experiment. We then use a parametric-likelihood approach to validate the modeling and estimate atmosphere parameters from the POLARBEAR-I project first season data set. We derive a new 1.0% upper limit on the linear polarization fraction of atmospheric emission. We also compare our results to previous studies and weather station measurements. The proposed model can be used for realistic simulations of future ground-based CMB observations., Comment: 20 pages, 16 figures