Search

The purpose of this study was to determine how the characteristics of the data acquisition (DAQ) electronics of a Compton camera (CC) affect the quality of the recorded prompt gamma (PG) interaction data and the reconstructed images, during clinical proton beam delivery. We used the Monte-Carlo-plus-Detector-Effect (MCDE) model to simulate the delivery of a 150 MeV clinical proton pencil beam to a tissue-equivalent plastic phantom. With the MCDE model we analyzed how the recorded PG interaction data changed as two characteristics of the DAQ electronics of a CC were changed: (1) the number of data readout channels; and (2) the active charge collection, readout, and reset time. As the proton beam dose rate increased, the number of recorded PG single-, double-, and triple-scatter events decreased by a factor of 60× for the current DAQ configuration of the CC. However, as the DAQ readout channels were increased and the readout/reset timing decreased, the number of recorded events decreased by

PURPOSE: To study the accuracy with which proton stopping power ratio (SPR) can be determined with dual-energy computed tomography (DECT) for small structures and bone-tissue-air interfaces like those found in the head or in the neck. METHODS: Hollow cylindrical polylactic acid (PLA) plugs (3 cm diameter, 5 cm height) were 3D-printed containing either one or three septa with thicknesses t(septa) = 0.8 mm, 1.6 mm, 3.2 mm and 6.4 mm running along the length of the plug. The cylinders were inserted individually into a tissue equivalent head phantom (16 cm diameter, 5 cm height). First, DECT scans were obtained using a Siemens SOMATOM Definition Edge CT scanner. Effective atomic number (Z(eff)) and electron density (ρ(e)) images were reconstructed from the DECT to produce SPR-CT images of each plug. Second, independent elemental composition analysis of the PLA plastic was used to determine the Z(eff) and ρ(e) for calculating the theoretical SPR (SPR-TH) using the Bethe-Bloch equation. Finally, for each plug, a direct measurement of SPR (SPR-DM) was obtained in a clinical proton beam. The values of SPR-CT, SPR-TH, and SPR-DM were compared. RESULTS: SPR-CT for PLA agreed with SPR-DM for t(septa) ≥ 3 mm (for CT slice thicknesses of 0.5 mm, 1.0 mm, and 3.0 mm). The density of PLA was found to decrease with thickness when t(septa) < 3 mm. As t(septa) (and density) decreased, the SPR-CT values also decreased, in good agreement with SPR-DM and SPR-TH. CONCLUSION: Overall, the DECT-based SPR-CT was within 3% of SPR-TH and SPR-DM in the high-density gradient regions of the 3D-printed plugs for septa greater than ~3mm in thickness.

We present Compton camera (CC) based PG imaging for proton range verification at clinical dose rates. PG emission from a tissue-equivalent phantom during irradiation with clinical proton beams was measured with a prototype CC. Images were reconstructed of the raw measured data and of data processed with a neural network (NN) trained to identify “true” and “false” PG events. From these images, we determine if PG images produced by the prototype CC could provide clinically useful information about the in vivo range of the proton beams delivered during proton beam radiotherapy. NN processing of the data was found necessary to allow identification of the proton beam path from the PG images. Furthermore, to allow the localization of the end of the proton beam range with a precision of ≤ 3mm with the prototype CC, ~1 x 109 protons would need to be delivered, which is on the order of magnitude delivered for a standard proton radiotherapy treatment field. To obtain higher precision in beam range determination and to allow imaging a single proton pencil beam delivered within the full treatment field, further improvements in PG detection rates by the CC, NN data processing, and image reconstruction algorithms are needed.

The purpose of this study was to determine the types, proportions, and energies of secondary particle interactions in a Compton camera (CC) during the delivery of clinical proton beams. The delivery of clinical proton pencil beams ranging from 70 to 200 MeV incident on a water phantom was simulated using Geant4 software (version 10.4). The simulation included a CC similar to the configuration of a Polaris J3 CC designed to image prompt gammas (PGs) emitted during proton beam irradiation for the purpose of in vivo range verification. The interaction positions and energies of secondary particles in each CC detector module were scored. For a 150-MeV proton beam, a total of 156,688(575) secondary particles per 10(8) protons, primarily composed of gamma rays (46.31%), neutrons (41.37%), and electrons (8.88%), were found to reach the camera modules, and 79.37% of these particles interacted with the modules. Strategies for using CCs for proton range verification should include methods of reducing the large neutron backgrounds and low-energy non-PG radiation. The proportions of interaction types by module from this study may provide information useful for background suppression.

Position sensitive CdZnTe Compton imaging cameras are currently being studied for their use of proton beam range verification for radiotherapy applications. This work presents the use of an experimental large volume CdZnTe detector for the detection of prompt gamma rays that are emitted from proton-nuclei interaction within plastic (C2H4) targets. Two experiments were conducted where the incident angle and the dose profile of the beam were varied. The energy spectra from these experiments show that the angle at which the beam enters the target can influence the photopeak to Compton continuum ratios, resulting in more than 18% increase at 718 keV when the beam is parallel to the detector. Images of the 718 keV and 4.44 MeV characteristic prompt gamma ray emission from carbon-proton interactions are reconstructed using list-mode maximum likelihood expectation maximization (MLEM). Images from these prompt gamma emissions line up well with the expected location of the proton beam within the plastic targets.

The Optically Segmented Single Volume Scatter Camera (OS-SVSC) aims to image neutron sources for nuclear non-proliferation applications using the kinematic reconstruction of elastic double-scatter events. We report on the design, construction, and calibration of one module of a new prototype. The module includes 16 EJ-204 organic plastic scintillating bars individually wrapped in Teflon tape, each measuring 0.5 cm$\times$0.5 cm$\times$20 cm. The scintillator array is coupled to two custom Silicon Photomultiplier (SiPM) boards consisting of a 2$\times$8 array of SensL J-Series-60035 Silicon Photomultipliers, which are read out by a custom 16 channel DRS-4 based digitizer board. The electrical crosstalk between SiPMs within the electronics chain is measured as 0.76% $\pm$ 0.11% among all 16 channels. We report the detector response of one module including interaction position, time, and energy, using two different optical coupling materials: EJ-560 silicone rubber optical coupling pads and EJ-550 optical coupling grease. We present results in terms of the overall mean and standard deviation of the z-position reconstruction and interaction time resolutions for all 16 bars in the module. We observed the z-position resolution for gamma interactions in the 0.3 MeVee to 0.4 MeVee range to be 2.24 cm$\pm$1.10 cm and 1.45 cm$\pm$0.19 cm for silicone optical coupling pad and optical grease, respectively. The observed interaction time resolution is 265 ps$\pm$29 ps and 235 ps$\pm$10 ps for silicone optical coupling pad and optical grease, respectively., Comment: 11 pages, 21 figures. This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Concurrent activation of voltage-gated sodium channels (VGSCs) and blockade of Na+ pumps causes a targeted osmotic lysis (TOL) of carcinomas that over-express the VGSCs. Unfortunately, electrical current bypasses tumors or tumor sections because of the variable resistance of the extracellular microenvironment. This study assesses pulsed magnetic fields (PMFs) as a potential source for activating VGSCs to initiate TOL in vitro and in vivo as PMFs are unaffected by nonconductive tissues. In vitro, PMFs (0&ndash, 80 mT, 10 msec pulses, 15 pps for 10 min) combined with digoxin-lysed (500 nM) MDA-MB-231 breast cancer cells stimulus-dependently. Untreated, stimulation-only, and digoxin-only control cells did not lyse. MCF-10a normal breast cells were also unaffected. MDA-MB-231 cells did not lyse in a Na+-free buffer. In vivo, 30 min of PMF stimulation of MDA-MB-231 xenografts in J/Nu mice or 4T1 homografts in BALB/c mice, concurrently treated with 7 mg/kg digoxin reduced tumor size by 60&ndash, 100%. Kidney, spleen, skin and muscle from these animals were unaffected. Stimulation-only and digoxin-only controls were similar to untreated tumors. BALB/C mice with 4T1 homografts survived significantly longer than mice in the three control groups. The data presented is evidence that the PMFs to activate VGSCs in TOL provide sufficient energy to lyse highly malignant cells in vitro and to reduce tumor growth of highly malignant grafts and improve host survival in vivo, thus supporting targeted osmotic lysis of cancer as a possible method for treating late-stage carcinomas without compromising noncancerous tissues.

This paper describes a realistic simulation of a Compton-camera (CC) based prompt-gamma (PG) imaging system for proton range verification for a range of clinical dose rates, and its comparison to PG measured data with a pre-clinical CC. We used a Monte Carlo plus Detector Effects (MCDE) model to simulate the production of prompt gamma-rays (PG) and their energy depositions in the CC. With Monte Carlo, we simulated PG emission resulting from irradiation of a high density polyethylene phantom with a 150 MeV proton pencil beam at dose rates of 5.0 × 108, 2.6 × 109, and 4.6 × 109 p+ s−1. Realistic detector timing effects (e.g. delayed triggering time, event-coincidence, dead time, etc,) were added in post-processing to allow for flexible count rate variations. We acquired PG emission measurements with our pre-clinical CC during irradiation with a clinical 150 MeV proton pencil beam at the same dose rates. For simulations and measurements, three primary changes could be seen in the PG emission data as the dose rate increased: (1) reduction in the total number of detected events due to increased dead-time percentage; (2) increase in false-coincidence events (i.e. multiple PGs interacting, rather than a single PG scatter); and (3) loss of distinct PG emission peaks in the energy spectrum. We used the MCDE model to estimate the quality of our measured PG data, primarily with regards to true and false double-scatters and triple-scatters recorded by the CC. The simulation results showed that of the recorded double-scatter PG interactions 22%, 57%, and 70% were false double-scatters and for triple-scatter interactions 3%, 21%, and 35% were false events at 5.0 × 108, 2.6 × 109, and 4.6 × 109 p+ s−1, respectively. These false scatter events represent noise in the data, and the high percentage of these events in the data represents a major limitation in our ability to produce usable PG images with our prototype CC.