Search

Abstract Carbon-based materials that serve as microbial carriers, and the role of surface-formed biofilms in anaerobic digestion, merit further investigation. This study explored the role and mechanism behind the biodegradation enhancement of biofilms formed onto anthraquinone-loaded biochar (AQS-BC) surfaces through the anaerobic decolorization process of azo dye Reactive Red 2, and optimized the conditions for AQS-BC biofilm formation. The results indicated that the AQS-BC biofilm system exhibited high treatment efficiency and stability in RR2 anaerobic decolorization. RR2 led to the accumulation of volatile fatty acids (VFAs) and inhibition of methane production, while the presence of AQS increased methane production. The effects of sludge concentration, contact time, carbon source concentration, and RR2 concentration on biofilm maturity were also analyzed. Combining biochemical characteristics, electrochemical properties, surface structure, and microbial community analysis, a mechanism for the anaerobic decolorization of RR2 via AQS-BC as a microbial carrier was proposed. This study provides insights into the roles of biofilms in the anaerobic wastewater treatment processes. Graphical Abstract

Bisphenol A, a hazardous endocrine disruptor, poses significant environmental and human health threats, demanding efficient removal approaches. Traditional biological methods struggle to treat BPA wastewater with high chloride (Cl−) levels due to the toxicity of high Cl− to microorganisms. While persulfate-based advanced oxidation processes (PS-AOPs) have shown promise in removing BPA from high Cl− wastewater, their widespread application is always limited by the high energy and chemical usage costs. Here we show that peroxymonosulfate (PMS) degrades BPA in situ under high Cl− concentrations. BPA was completely removed in 30 min with 0.3 mM PMS and 60 mM Cl−. Non-radical reactive species, notably free chlorine species, including dissolved Cl2(l), HClO, and ClO− dominate the removal of BPA at temperatures ranging from 15 to 60 °C. Besides, free radicals, including •OH and Cl2•−, contribute minimally to BPA removal at 60 °C. Based on the elementary kinetic models, the production rate constant of Cl2(l) (32.5 M−1 s−1) is much higher than HClO (6.5 × 10−4 M−1 s−1), and its degradation rate with BPA (2 × 107 M−1 s−1) is also much faster than HClO (18 M−1 s−1). Furthermore, the degradation of BPA by Cl2(l) and HClO were enlarged by 10- and 18-fold at 60 °C compared to room temperature, suggesting waste heat utilization can enhance treatment performance. Overall, this research provides valuable insights into the effectiveness of direct PMS introduction for removing organic micropollutants from high Cl− wastewater. It further underscores the critical kinetics and mechanisms within the PMS/Cl⁻ system, presenting a cost-effective and environmentally sustainable alternative for wastewater treatment.

The digital twins concept enhances modeling and simulation through the integration of real-time data and feedback. This review elucidates the foundational elements of digital twins, covering their concept, entities, domains, and key technologies. More specifically, we investigate the transformative potential of digital twins for the wastewater treatment engineering sector. Our discussion highlights the application of digital twins to wastewater treatment plants (WWTPs) and sewage networks, hardware (i.e., facilities and pipes, sensors for water quality and activated sludge, hydrodynamics, and power consumption), and software (i.e., knowledge-based and data-driven models, mechanistic models, hybrid twins, control methods, and the Internet of Things). Furthermore, two cases are provided, followed by an assessment of current challenges in and perspectives on the application of digital twins in WWTPs. This review serves as an essential primer for wastewater engineers navigating the digital paradigm shift.

Microalgal-indigenous bacterial wastewater treatment (MBWT) emerges as a promising approach for the concurrent removal of nitrogen (N) and phosphorus (P). Despite its potential, the prevalent use of MBWT in batch systems limits its broader application. Furthermore, the success of MBWT critically depends on the stable self-adaptation and synergistic interactions between microalgae and indigenous bacteria, yet the underlying biological mechanisms are not fully understood. Here we explore the viability and microbial dynamics of a continuous flow microalgae-indigenous bacteria advanced wastewater treatment system (CFMBAWTS) in processing actual secondary effluent, with a focus on varying hydraulic retention times (HRTs). The research highlights a stable, mutually beneficial relationship between indigenous bacteria and microalgae. Microalgae and indigenous bacteria can create an optimal environment for each other by providing essential cofactors (like iron, vitamins, and indole-3-acetic acid), oxygen, dissolved organic matter, and tryptophan. This collaboration leads to effective microbial growth, enhanced N and P removal, and energy generation. The study also uncovers crucial metabolic pathways, functional genes, and patterns of microbial succession. Significantly, the effluent NH4+-N and P levels complied with the Chinese national Class-II, Class-V, Class-IA, and Class-IB wastewater discharge standards when the HRT was reduced from 15 to 6 h. Optimal results, including the highest rates of CO2 fixation (1.23 g L−1), total energy yield (32.35 kJ L−1), and the maximal lipid (33.91%) and carbohydrate (41.91%) content, were observed at an HRT of 15 h. Overall, this study not only confirms the feasibility of CFMBAWTS but also lays a crucial foundation for enhancing our understanding of this technology and propelling its practical application in wastewater treatment plants.

Wastewater treatment is an important source of greenhouse gases (GHGs). Yet large uncertainties remain in the quantification of GHG emissions from municipal wastewater treatment plants (MWWTPs) in China. A high-resolution and technology-specific emission inventory is still lacking to support mitigation strategies of MWWTPs. Here we develop a plant-level and technology-based MWWTP emission inventory for China covering 8703 plants and 19 treatment technology categories by compiling and harmonizing the most up-to-date facility-level databases. China's methane (CH4) and nitrous oxide (N2O) emissions from MWWTPs in 2020 are estimated to be 150.6 Gg and 22.0 Gg, respectively, with the uncertainty range of −30% to 37% and −30% to 26% at 95% confidence interval. We find an emission inequality across cities, with the richest cities emitting two times more CH4 and N2O per capita from municipal wastewater treatment than the poorest cities. The emitted CH4 and N2O are dominated by Anaerobic/Anoxic/Oxic-, Sequencing Batch Reactor-, Oxidation Ditch-, and Anoxic/Oxic-based MWWTPs of less than 20 years old. Considering the relatively young age structure of China's MWWTPs, the committed emissions highlight the importance of reducing on-site GHG emissions by optimization of operating conditions and innovation management. The emission differences among our estimates, previous studies, and the Intergovernmental Panel on Climate Change guidelines are largely attributed to the uncertainties in emission factors, implying the urgent need for more plant-integrated measurements to improve the accuracy of emission accounting.

The removal of emerging micropollutants in the aquatic environment remains a global challenge. Conventional routes are often chemically, energetically, and operationally intensive, which decreases their sustainability during applications. Herein, we develop an advanced chemical-free strategy for micropollutants decontamination that is solely based on sequential electrochemistry involving ubiquitous sulfate anions in natural and engineered waters. This can be achieved via a chain reaction initiated by electrocatalytic anodic sulfate (SO42−) oxidation to produce persulfate (S2O82−) and followed by a cathodic persulfate reduction to produce sulfate radicals (SO4̇−). These SO4̇− are powerful reactive species that enable the unselective degradation of micropollutants and yield SO42− again in the treated water. The proposed flow-through electrochemical system achieves the efficient degradation (100.0%) and total organic carbon removal (65.0%) of aniline under optimized conditions with a single-pass mode. We also reveal the effectiveness of the proposed system for the degradation of a wide array of emerging micropollutants over a broad pH range and in complex matrices. This work provides the first proof-of-concept demonstration using ubiquitous sulfate for micropollutants decontamination, making water purification more sustainable and more economical.

Defect engineering is an effective strategy to boost the catalytic activity of MXene towards heterogeneous peroxymonosulfate (PMS) activation for water decontamination. Herein, we developed a facile approach to fine-tune the generation of oxygen vacancies (OVs) on Ti3CNTx crystals by Ce-doping (Ce-Ti3CNTx) with the aim of mediating PMS activation for the degradation of micropollutants in water. By varying the dopant content, the OV concentrations of Ti3CNTx could be varied to enable the activation of PMS to almost 100% singlet oxygen (1O2), and hence the effective degradation of sulfamethoxazole (SMX, a model micropollutant). Various advanced characterization techniques were employed to obtain detailed information on the microstructure, morphology, and defect states of the catalysts. The experimental results showed that SMX removal was proportional to the OVs level. Density functional theory (DFT) models demonstrated that, in contrast to pristine Ti3CNTx, the OVs on 10%Ce-Ti3CNTx could adsorb the terminal O of PMS, which facilitated the formation of SO5•− as well as the generation of 1O2. We further loaded the optimized catalysts onto a polytetrafluoroethylene microfiltration membrane and also demonstrated the efficient removal of SMX from water using a convection-enhanced mass transport flow-through configuration. This study provides new insights into the effective removal of micropollutants from water by integrating state-of-the-art defect engineering, advanced oxidation, and microfiltration techniques.

AlFuMoF was obtained by purifying the secondary aluminum ash and using hydrothermal method and modification treatment. Next, using the β-Cyclodextrin impregnation treatment AlFuMoF, a modified MOF (β-CD@AlFuMoF) was obtained. Both MOFs were subsequently characterized, and their potential for adsorption of fluoride from wastewater was compared. The characterization was performed by SEM, EDS, FTIR, XRD, particle size change and thermogravimetric. The adsorption characteristics of AlFuMoF and β-CD@AlFuMoF under different conditions of pH, contact time as well as initial concentration were evaluated using kinetic and thermodynamic studies and adsorption isotherms. In terms of dynamics, the pseudo second order model fits the experimental data best. According to the Langmuir model, the maximum fluoride adsorption capacity of AlFuMoF and β-CD@AlFuMoF are 22.56 and 39.95 mg g−1, respectively. Thermodynamic studies show that the adsorption of fluoride on AlFuMoF and β-CD@AlFuMoF are spontaneous and mainly controlled by chemical adsorption. According to the findings, β-CD modification of AlFuMoF can be considered as a promising method for removing fluoride from wastewater.

Most studies focus on the “clockwise sequential” switching manner for a four-compartment periodic anaerobic baffled reactor (PABR), while the exploration of the “every second” option on the feasibility for real industrial wastewater treatment is rarely reported. Hence, a PABR-treating traditional Chinese medicine wastewater was run continuously in “every second” switching manner with both switching period T and hydraulic residence time of 48 h. Satisfactory start-up performance was achieved during the operation of a climbing average organic load rate at approximately 1, 2, 4, and 6 kg chemical oxygen demand (COD) m−3 d−1 for 12, 24, 24, and 6 days, respectively. The average COD removal was 87.20% after the second lifting of OLR and 89.98% after the third one. Denaturing gradient gel electrophoresis and its cluster analysis showed that the microbial communities in each compartment adapted their structure in response to the periodically changing micro-ecology conditions. Moreover, the residence time distribution test with tap water in the clean PABR was carried out in experiments and computational fluid dynamics (CFD) simulation, both of which were in good agreement. The CFD model output visualized the flow velocity field and hydrodynamic-mass transport inside the PABR. Optimization of operation pattern in PABR including switching manner and frequency depended on both the type of waste being treated and the flexibility of biomass to periodically changing micro-ecology conditions.

In this study, SAA@CS-CB(aluminum-ash carbide slag carbon black doped composite) was prepared by sintering method and modified by impregnation with oxalic acid to obtain SAA@CS-CBoa. Fluoride adsorption experiments were carried out using this composite as adsorbent. With increasing pH values, the adsorption amount of fluoride decreases in the range of 2–11. The pseudo second order equation and Langmuir model were fit to the experimental data, and the adsorption of fluoride by SAA@CS-CBoa exhibited spontaneous and endothermic characteristics. When PO43-, CO32–, SO42-, Cl-, NO3–, Br- and HCO3– anions were individually or combined in solution, the adsorbents exhibited higher fluoride selectivity and sensitivity, while PO43-and CO32– weakened the adsorption of fluoride in solution in the same way regardless of the presence of the other 5 anions. The results of SEM, EDS, XRD and FTIR characterizations showed that the mechanism of fluoride adsorption and removal by SAA@CS-CBoa included the combined effects of electrostatic attraction, surface coordination precipitation and ion exchange. SAA@CS-CBoa is an effective composite material for water adsorption of fluoride, and still has an excellent performance of cyclic regeneration after 10 times adsorption desorption. This study provides a new approach for the utilization of fluoride removal resources for industrial solid waste resource recycling.

Conventional biological treatment usually cannot achieve the same high water quality as advanced treatment when conducted under varied temperatures. Here, satisfactory wastewater treatment efficiency was observed in a microalgae-bacteria consortia (MBC) over a wide temperature range because of the predominance of microalgae. Microalgae contributed more toward wastewater treatment at low temperature because of the unsatisfactory performance of the accompanying bacteria, which experienced cold stress (e.g., bacterial abundance below 3000 sequences) and executed defensive strategies (e.g., enrichment of cold-shock proteins). A low abundance of amoA-C and hao indicated that conventional nitrogen removal was replaced through the involvement of microalgae. Diverse heterotrophic bacteria for nitrogen removal were identified at medium and high temperatures, implying this microbial niche treatment contained diverse flexible consortia with temperature variation. Additionally, pathogenic bacteria were eliminated through microalgal photosynthesis. After fitting the neutral community model and calculating the ecological niche, microalgae achieved a maximum niche breadth of 5.21 and the lowest niche overlap of 0.38, while the accompanying bacterial community in the consortia were shaped through deterministic processes. Finally, the maximum energy yield of 87.4 kJ L−1 and lipid production of 1.9 g L−1 were achieved at medium temperature. Altogether, this study demonstrates that advanced treatment and energy reclamation can be achieved through microalgae-bacteria niche strategies.

Chlorophenols (CPs) are significant refractory pollutants that are highly toxic to humans and other organisms. Reactive electrode membranes (REMs) show considerable potential in the electrochemical removal of refractory pollutants by allowing flow-through operations with convection-enhanced mass transfer. However, relevant studies are commonly performed on the laboratory scale, and there is no straightforward method that guarantees success in scaling up engineered REM reactors. In this study, we demonstrated that a tubular concentric electrode (TCE) configuration with a titanium suboxide ceramic anode and a stainless-steel cathode is suitable for large-scale CPs removal. Both theoretical and experimental results showed that the TCE configuration not only allows the electrode surface to be orthogonal to electric field lines everywhere, but also has an ohmic resistance that is inversely proportional to the length of the electrode. In addition, the TCE configuration can be operated in either the anode-to-cathode (AC) or the cathode-to-anode (CA) mode based on the flow direction, creating adjustable conditions for selective degradation of CPs. This was confirmed by 98% removal of 2,4-dichlorophenol (2,4-DCP) and 72.5% removal of chemical oxygen demand (COD) in the CA mode, in which the kinetic constant was one order of magnitude higher than that for the AC mode under flow-through single-pass operations. This can be explained by the lower activation energy and free energy in the CA mode, as revealed by theoretical calculations and experimental measurements. The TCE configuration is also suitable for a numbering-up strategy to scale up the electrochemical reactor without increasing the ohmic resistance or decreasing the specific electrode area, achieving 99.4% removal of 2,4-DCP with an energy consumption of 1.5 kW·h·m−3 when three TCE modules were employed. This study presents a suitable electrode design configuration for the REM reactor, offering effective strategies to bridge the “Valley of Death” encountered when scaling up the electrochemical removal of CP pollutants.

Solar-driven desalination systems have been recognized as an effective technology to address the water crisis. Recently, evaporators prepared based on advanced manufacturing technologies have emerged as a promising tool in enhancing ocean energy utilization. In this review, we discussed the thermal conversion, energy flow, salt deposition mechanisms, and design strategies for solar-driven desalination systems, and explored how to improve the desalination performance and energy use efficiency of the systems through advanced manufacturing technologies. In future perspectives, we determined the feasibility of coupling solar-driven solar desalination systems with multi-stage energy utilization systems and emerging artificial intelligence technologies, for which conclusions are given and new directions for future desalination system development are envisioned. Finally, exciting opportunities and challenges in the face of basic research and practical implementation are discussed, providing promising solutions and blueprints for green and novel desalination technologies while achieving sustainable development.

Complex interactions between plants and microorganisms form the basis of constructed wetlands (CWs) for pollutant removal. In the rhizosphere, radial oxygen loss (ROL) plays a key role in the activity and abundance of functional microorganisms. However, little has been done to explore how ROL would influence the niche differentiation of microbial communities at different vertical spatial scales. We demonstrate that ROL decreases with depth, promoting an oxidation-reduction rhizosphere microecosystem in CWs. The high level of ROL in the upper layer could support the oxygen supply for aerobic bacteria (Haliangium), facilitating the COD (60%) and NH4+-N (50%) removal, whereas the enrichment of denitrifiers (e.g., Hydrogenophaga and Ralstonia) and methanotrophs (Methanobaterium) in the lower layer could stimulate denitrification. The function prediction results further certified that the abundance of genes catalyzing nitrifying and denitrification processes were significantly enhanced in the upper and bottom layers, respectively, which was attributed to the oxygen concentration gradient in the rhizosphere. This study contributes to further unraveling the rhizosphere effect and enables an improved understanding of the decontamination mechanisms of CWs.

In this study, we exposed adult male crayfish (Procambarus clarkii) to different concentrations of diclofenac (DCF) for 96 h. In the meantime, we investigated the alternations of hepatopancreatic pathology, molecular regulation and intestinal microbiota of P. clarkii exposed to DCF. The results demonstrated DCF led to histological changes including epithelium vacuolization and tubule lumen dilatation in the hepatopancreas. Transcriptome sequencing analysis showed that 642 and 586 genes were differentially expressed in the hepatopancreas of P. clarkii exposed to 1 and 10 mg/L DCF, respectively. DCF could affect the functions of antioxidation, immunity and metabolism of hepatopancreas by inducing the abnormal expressions of immune- and redox-related genes. GO enrichment results demonstrated that 10 mg/L DCF exposure could modulate the processes of molting, amino sugar metabolism, protein hydrolysis and intracellular protein translocation of P. clarkii. Additionally, the abundances of bacterial families including Shewanellaceae, Bacteroidaceae, Vibrionaceae, Erysipelotrichaceae, Aeromonadaceae, Moraxellaceae, etc. in the intestine were significantly changed after DCF exposure, and the disruption of intestinal flora might further cause abnormal intestinal metabolism in P. clarkii. This study provides novel mechanistic insights into the toxic effects of anti-inflammatory drugs on aquatic crustaceans.

Ciliates are an important component of the rhizosphere microorganism community, but their nutritional contribution to plants has not been fully revealed. In this paper, we investigated the rhizosphere ciliate community of potatoes during six growth stages, illustrated the spatial–temporal dynamics of composition and diversity, and analyzed the correlation between soil physicochemical properties. The contributions of ciliates to the carbon- and nitrogen-derived nutrition of potatoes were calculated. Fifteen species of ciliates were identified, with higher diversity in the top soil, which increased as the potatoes grew, while they were more abundant in the deep soil, and the number decreased as the potatoes grew. The highest number of species of ciliates appeared in July (seedling stage). Among the five core species of ciliates, Colpoda sp. was the dominant species in all six growth stages. Multiple physicochemical properties affected the rhizosphere ciliate community, with ammonium nitrogen (NH4+-N) and the soil water content (SWC) greatly influencing ciliate abundance. The key correlation factors of ciliates diversity were NH4+-N, available phosphorus (AP), and soil organic matter (SOM). The annual average contribution rates of carbon and nitrogen by rhizosphere ciliates to potatoes were 30.57% and 23.31%, respectively, with the highest C/N contribution rates reaching 94.36% and 72.29% in the seedling stage. This study established a method for estimating the contributions of carbon and nitrogen by ciliates to crops and found that ciliates could be potential organic fertilizer organisms. These results might be used to improve water and nitrogen management in potato cultivation and promote ecological agriculture.

Recently, every industry has been working to achieve carbon neutrality, and the wastewater sector is no exception. However, little research focuses on the carbon accounting of wastewater treatment and the roadmap to carbon neutrality. Here, to systematically perform accounting, we provide a sketch that describes three boundaries of the wastewater system and propose that the carbon neutrality of the wastewater system is far beyond the plant boundary. Moreover, we identify the direct and indirect carbon emissions of wastewater treatment. In addition to direct emissions of CH4 and N2O, direct fossil CO2 emissions from wastewater treatment should be included in accounting to set accurate guidelines. Next, the technologies that assist in achieving carbon-neutral wastewater treatment both within-the-fence of wastewater treatment plants and beyond the plant boundary are summarized. All measurements of energy recovery, resource recovery, and water reuse contribute to reaching this goal. The concepts of energy neutrality and carbon neutrality are identified. Successful wastewater treatment cases in energy self-sufficiency may not achieve carbon neutrality. Meanwhile, resource recovery methods are encouraged, especially to produce carbon-based materials. Ultimately, the trend of preference for the decentralized sewage treatment system is pinpointed, and systematic thinking to set the urban infrastructure layout as a whole is advocated.

In order to clarify the pollution characteristics and human health risks of PFASs pollutants in typical drinking water sources in Zhejiang Province, this study relies on ultra -performance liquid chromatography-mass spectrometry (UPLC-MS/MS) technology to analyze the pollution of 26 PFASs in 7 reservoirs in Zhejiang Province. The detected concentrations of PFASs were evaluated to further assess the human health risks. Total PFASs concentrations in the seven reservoirs ranged from 1.30 ng L−1–24.90 ng L−1. Among the 26 PFASs pollutants analyzed, PFOA and PFBA were the main PFASs pollutants, the detected concentrations of PFOA and PFBS ranging from 0.50 ng L−1–13.70 ng L−1 and 0 ng L−1–1.70 ng L−1, respectively. Then we evaluated 15 PFASs and calculated the results of the HQ value of the reproductive toxicity and hepatotoxicity of the total PFASs in this study ranged from 2.30 × 10–8 to 1.16 × 10–4 and 9 × 10–8 to 5.24 × 10–4 respectively, which were both lower than 0.01, indicating that there is no significant risk to the human body.

The definition of reactive sulfur species (RSS) is inspired by the reactivity and variable chemical valence of sulfur. Sulfur is an essential element for life and is a part of global geochemical cycles. Wastewater treatment bioreactors can be divided into two major categories: sulfur reduction and sulfur oxidation. We review the origins of the definition of RSS and related biotechnological processes in environmental management. Sulfate reduction, sulfide oxidation, and sulfur-based redox reactions are key to driving the coupled global carbon, nitrogen, and sulfur co-cycles. This shows the coupling of the sulfur cycle with the carbon and nitrogen cycles and provides insights into the global material−chemical cycle. We also review the biological classification and RSS metabolic mechanisms of functional microorganisms involved in the biological processes, such as sulfate-reducing and sulfur-oxidizing bacteria. Developments in molecular biology and genomic technologies have allowed us to obtain detailed information on these bacteria. The importance of RSS in environmental technologies requires further consideration.

This study evaluated the feasibility of continuous biohythane production from rice straw (RS) using an integrated anaerobic bioreactor (IABR) at thermophilic conditions. NaOH/Urea solution was employed as a pretreatment method to enhance and improve biohythane production. Results showed that the maximum specific biohythane yield was 612.5 mL/g VS, including 104.1 mL/g VS for H2 and 508.4 mL/g VS for CH4, which was 31.3% higher than the control RS operation stage. The maximum total chemical oxygen demand (COD) removal stabilized at about 86.8%. COD distribution results indicated that 2% of the total COD (in the feed) was converted into H2, 85.4% was converted to CH4, and 12.6% was retained in the effluent. Furthermore, carbon distribution analysis demonstrated that H2 production only diverted a small part of carbon, and most of the carbon flowed to the CH4 fermentation process. Upon further energy conversion analysis, the maximum value was 166.7%, 31.7 times and 12.8% higher than a single H2 and CH4 production process. This study provides a new perspective on lignocellulose-to-biofuel recovery.

Quorum quenching (QQ) is a novel anti-biofouling strategy for membrane bioreactors (MBRs) used in wastewater treatment. However, actual operation of QQ-MBR systems for wastewater treatment needs to be systematically studied to evaluate the comprehensive effects of QQ on wastewater treatment engineering applications. In this study, a novel QQ strain, Acinetobacter pittii HITSZ001, was encapsulated and applied to a MBR system to evaluate the effects of this organism on real wastewater treatment. To verify the effectiveness of immobilized QQ beads in the MBR system, we examined the MBR effluent quality and sludge characteristics. We also measured the extracellular polymeric substances (EPS) and soluble microbial products (SMP) in the system to determine the effects of the organism on membrane biofouling inhibition. Additionally, changes in microbial communities in the system were analyzed by high-throughput sequencing. The results indicated that Acinetobacter pittii HITSZ001 is a promising strain for biofouling reduction in MBRs treating real wastewater, and that immobilization does not affect the biofouling control potential of QQ bacteria.

Abstract Background Microalgae as a viable biodiesel feedstock show great potential to approach the challenges of energy shortage and environment pollution, but their economic feasibility was seriously hampered by high production cost. Thus, it is in urgent need to reduce the cost of cultivation and improve the biomass and lipid production of microalgae. In this work, anaerobic digestion effluent from cattle manure combined with municipal wastewater was used as a cost-effective medium for cultivating microalgae and expected to obtain high biomass. The pretreatment of anaerobic digested effluent containing dilution rate, sterilization and nutrient optimization was investigated. Then, initial pH and light intensity for algal growth, lipid production and wastewater purification were optimized in this study. Results Scenedesmus sp. could grow rapidly in 10% anaerobic digestion effluent from cattle manure combined with secondary sedimentation tank effluent without sterilization. Optimum nutrient additives for higher biomass were as follows: glucose 10 g/L, NaNO3 0.3 g/L, K2HPO4·3H2O 0.01 g/L, MgSO4·7H2O 0.075 g/L and trace element A5 solution 1 mL/L. Biomass of 4.65 g/L and lipid productivity of 81.90 mg/L/day were achieved during 7-day cultivation accompanying over 90% of COD, NO3 −-N, NH4 +-N, and 79–88% of PO4 3−-P removal with optimized initial pH of 7.0 and light intensity of 5000 l×. The FAME profile in ADEC growth medium consisted in saturated (39.48%) and monounsaturated (60.52%) fatty acids with the 16- to 18-chain-length fatty acids constituting over 98% of total FAME. Conclusions This study proves the potential of anaerobic digested effluent combined with municipal wastewater for microalgae culture, and provides an effective avenue for simultaneous microalgal lipid production and treatment of two kinds of wastewater.

Ethanoligenens, a novel ethanologenic hydrogen-producing genus, is a representative fermenter in its unique acetate-ethanol fermentation and physiology. Acetic acid accumulation is one of major factors that affect H2-ethanol co-production. However, sufficient information is unavailable on the tolerance mechanisms of hydrogen-producing bacterium in acetic acid stress. The fermentation process of Ethanoligenens harbinense YUAN-3 was significantly slowed down in the selection stress of exogenous acetic acid. The maximum gas production rate of strain YUAN-3 decreased from 192.15 mL·(L-culture)−1·h−1 to 75.2 mL·(L-culture)−1·h−1 with increasing exogenous acetic acid from 0 mM to 30 mM, the batch fermentation period was correspondingly expanded from 66 h to 136 h. Through iTRAQ-based quantitative proteomic approach, 78, 121 and 216 proteins were differentially expressed after strain YUAN-3 was cultured in the medium supplemented with exogenous acetic acid of 10 mM, 20 mM and 30 mM. The up-regulated proteins were mainly involved in β-alanine and pyrimidine metabolism, oxidative stress response, while the down-regulated proteins mainly participated in phosphotransferase system (PTS), fructose and mannose metabolism, phosphate uptake, ribosome, and flagellar assembly. These proteins help to maintain balance between fermentation process and alleviation of intracellular acidification in strain YUAN-3. The study indicated that response to acetic acid stress in strain YUAN-3 was a complex process, which involved multiple metabolic pathways. Reductive pyrimidine catabolic pathway played an important role in the acetic acid resistance of E. harbinense. Keywords: Hydrogen-producing bacteria, Ethanoligenens harbinense, Acetate-ethanol fermentation, Acetic acid tolerance, Quantitative proteomics, iTRAQ

Abstract Background H2–ethanol-coproducing bacteria, as primary fermenters, play important roles in the microbiome of bioreactors for bioenergy production from organic wastewater or solid wastes. Ethanoligenens harbinense YUAN-3 is an anaerobic ethanol–H2-fermenting bacterium. Ethanol is one of the main end-products of strain YUAN-3 that influence its fermentative process. Until recently, the molecular mechanism of metabolic regulation in strain YUAN-3 during ethanol accumulation has still been unclear. This study aims to elucidate the metabolic regulation mechanisms in strain YUAN-3, which contributes to effectively shape the microbiome for biofuel and bioenergy production from waste stream. Results This study reports that ethanol stress altered the distribution of end-product yields in the H2–ethanol-coproducing Ethanoligenens harbinense strain YUAN-3. Decreasing trends of hydrogen yield from 1888.6 ± 45.8 to 837 ± 64.7 mL L−1 and acetic acid yield from 1767.7 ± 45 to 160.6 ± 44.7 mg L−1 were observed in strain YUAN-3 with increasing exogenous ethanol (0 mM–200 mM). However, the ethanol yield of strain YUAN-3 increased by 15.1%, 30.1%, and 27.4% in 50 mM, 100 mM, and 200 mM ethanol stress, respectively. The endogenous ethanol accounted for 96.1% (w/w) in liquid end-products when exogenous ethanol of 200 mM was added. The molar ratio of ethanol to acetic acid increased 14 times (exogenous ethanol of 200 mM) compared to the control. iTRAQ-based quantitative proteomic analysis indicated that 263 proteins of strain YUAN-3 were differentially expressed in 50 mM, 100 mM, and 200 mM of exogenous ethanol. These proteins are mainly involved in amino acid transport and metabolism, central carbon metabolism, and oxidative stress response. Conclusion These differentially expressed proteins play important roles in metabolic changes necessary for growth and survival of strain YUAN-3 during ethanol stress. The up-regulation of bifunctional acetaldehyde-CoA/alcohol dehydrogenase (ADHE) was the main reason why ethanol production was enhanced, while hydrogen gas and acetic acid yields declined in strain YUAN-3 during ethanol stress. This study also provides a new approach for the enhancement of ethanologenesis by H2–ethanol-coproducing bacteria through exogenous ethanol addition.

The utilization of straw waste cellulose will be beneficial by economic, social, and environmental means. The present study sought to screen the high-efficiency cellulose sugar-producing strain from corn straw. The 16S high-throughput sequencing method and the combination of morphological, physiological, and biochemical characteristics of the strain confirmed the strain to be Clostridium thermocellum, which was named Clostridium thermocellum FC811. Moreover, the single factor experiment was conducted to investigate the effect of environmental factors on saccharification efficiency. The optimal saccharification conditions of cellulose saccharification of FC811 strain selected through response surface analysis were as follows: temperature of 58.9 °C, pH of 7.21, culture time of 6.60 d, substrate concentration of 5.01 g/L, and yeast powder concentration of 2.15 g/L. The soluble sugar yield was 3.11 g/L, and the conversion rate of reducing sugar was 62.2%. This study will provide a reference for resource and energy utilization of straw materials, simultaneous fermentation of sugar and hydrogen production, and their large-scale production and application.

Heterotrophic nitrification-aerobic denitrification (HNAD) is essential in diverse nitrogen-transforming processes. How HNAD is modulated by quorum sensing (QS) systems is still ambiguous. The QS system in Pseudomonas aeruginosa manipulates colony behavior. Here, we described the influence of the Pseudomonas quinolone signal (PQS) and N-acyl-l-homoserine lactone (AHL) on HNAD. The HNAD of P. aeruginosa was inhibited by the oversecretion of PQS. AHL- or PQS-deficient P. aeruginosa mutants had a higher ability for nitrogen removal. QS inhibited heterotrophic nitrification mainly via controlling the activity of nitrite oxidoreductase (NXR) and the depressed aerobic denitrification by regulating the catalytic abilities of nitric oxide reductase (NOR), nitrite reductase (NIR), and nitrate reductase (NAR). The addition of citrate as the sole carbon source increased the nitrogen removal efficiency compared with other carbon sources. Nitrite, as the sole nitrogen source, could be used entirely with only the moderate concentration of PQS contained. AHL and PQS controlled both nitrification and denitrification, suggesting that QS plays an important role in nitrogen cycle under aerobic conditions.

The permanganate/bisulfite (PM/BS) process is a novel oxidation process, which can degrade micropollutants within several seconds. As natural organic matter (NOM) ubiquitously exists in an aquatic environment, the PM/BS process will inevitably react with NOM, which may impact the disinfection-by-products (DBPs) formation during subsequent chlorination. This study investigated the effect of PM/BS pre-oxidation of NOM on DBP formation. It was found that TOC removal reached a plateau when the molar ratio of PM to BS was 1:5. Increasing ratios of PM to BS decreased the intensity and area of fluorescence spectroscopy. PM and BS doses, pre-oxidation time, pH of solutions and concentration of Br− impacted the formation potential of various DBPs. PM/BS pre-oxidation decreased the formation of TCM while increasing the yields of N-DBPs, thus increasing the risk of water quality. Calculated toxicity analysis showed that a general increase in CTI was observed with PM/BS pre-oxidation, indicating that PM/BS pre-oxidation had a negative effect on risk control of overall cytotoxicity. Although the PM/BS process could accelerate the degradation of micropollutants, the elevated DBPs formation, especially highly toxic N-DBPs, needs enough attention to control water-quality risk.

In the last few decades, anthraquinone and its derivatives (AQs) have been intensively applied to electrochemical, textile and dye, and photovoltaic industries. This has increased the levels of AQs in the natural environment and threatens human health. To remove AQs from the aqueous phase and recover these multi-functional molecules, a binary magnetic adsorbent, reduced graphene/Fe3O4 (rGO/Fe3O4), was synthesized via a hydrothermal method. Transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR), Raman spectra, and thermogravimetric analysis (TGA) were then used to characterize the samples. The adsorption capacities of rGO/Fe3O4 to AQs were investigated by selecting anthraquinone-2-sulfonate (AQ2S) as a model molecule. The adsorption process followed the Langmuir adsorption isotherm and the second-order kinetics. The regeneration of adsorbents and the recycling of AQ2S and solvent were simultaneously achieved by Soxhlet extraction and rotary evaporation. These results confirm the high adsorption efficiency of rGO/Fe3O4 for removing AQs from water and provide a promising approach to recover the valuable molecules from the aqueous phase.

Abstract Background Microbial extracellular electron transfer (EET) is essential in driving the microbial interspecies interaction and redox reactions in bioelectrochemical systems (BESs). Magnetite (Fe3O4) and magnetic fields (MFs) were recently reported to promote microbial EET, but the mechanisms of MFs stimulation of EET and current generation in BESs are not known. This study investigates the behavior of current generation and EET in a state-of-the-art pulse electromagnetic field (PEMF)-assisted magnetic BES (PEMF-MBES), which was equipped with magnetic carbon particle (Fe3O4@N-mC)-coated electrodes. Illumina Miseq sequencing of 16S rRNA gene amplicons was also conducted to reveal the changes of microbial communities and interactions on the anode in response to magnetic field. Results PEMF had significant influences on current generation. When reactors were operated in microbial fuel cell (MFC) mode with pulse electromagnetic field (PEMF-MMFCs), power densities increased by 25.3–36.0% compared with no PEMF control MFCs (PEMF-OFF-MMFCs). More interestingly, when PEMF was removed, the power density dropped by 25.7%, while when PEMF was reintroduced, the value was restored to the previous level. Illumina sequencing of 16S rRNA gene amplicon and principal component analysis (PCA) based on operational taxonomic units (OTUs) indicate that PEMFs led to the shifts in microbial community and changes in species evenness that decreased biofilm microbial diversity. Geobacter spp. were found dominant in all anode biofilms, but the relative abundance in PEMF-MMFCs (86.1–90.0%) was higher than in PEMF-OFF-MMFCs (82.5–82.7%), indicating that the magnetic field enriched Geobacter on the anode. The current generation of Geobacter-inoculated microbial electrolysis cells (MECs) presented the same change regularity, the accordingly increase or decrease corresponding with switch of PEMF, which confirmed the reversible stimulation of PEMFs on microbial electron transfer. Conclusion The pulse electromagnetic field (PEMF) showed significant influence on sta te-of-the-art pulse magnetic bioelectrochemical systems (PEMF-MBES) in terms of current generation and microbial ecology. EET was instantaneously and reversibly enhanced in MBESs inoculated with either mixed-culture or Geobacter. PEMF notably decreased bacterial and archaeal diversities of the anode biofilms in MMFCs via changing species evenness rather than species richness, and facilitated specific enrichment of exoelectrogenic bacteria (Geobacter) on the anode surface. This study demonstrates a new magnetic approach for understanding and facilitating microbial electrochemical activities.

Abstract Background Simultaneous wastewater treatment and lipid production by oleaginous microalgae show great potential to alleviate energy shortage and environmental pollution, because they exhibit tremendous advantages over traditional activated sludge. Currently, most research on wastewater treatment by microalgal are carried out at optimized temperature conditions (25–35 °C), but no information about simultaneous wastewater treatment and lipid production by microalgae at low temperatures has been reported. Microalgal growth and metabolism will be inhibited at low temperature conditions, and satisfactory wastewater treatment performance will be not obtained. Therefore, it is critical to domesticate and screen superior microalgal strains with low temperature adaptability, which is of great importance for wastewater treatment and biodiesel production. Results In this work, simultaneous wastewater treatment and lipid production were achieved by a microalgal mutant Scenedesmus sp. Z-4 at the low temperature conditions (4, 10, and 15 °C). The results showed that algal growth was inhibited at 4, 10, and 15 °C compared to that at the optimal temperature of 25 °C. However, decreased temperature had no significant effect on the total cellular lipid content of algae. Importantly, lipid productivity at 10 °C was compromised by more net energy output relevant to biodiesel production, which demonstrated that the low temperature of 10 °C was favorable to wastewater treatment and energy recovery by Scenedesmus sp. Z-4. When molasses wastewater with optimal COD concentration of 8000 mg L−1, initial inoculation ratio of 15%, and C/N ratio of 15 was used to cultivate microalgae, the maximum removal rate of COD, TN, and TP at 10 °C reached 87.2, 90.5, and 88.6%, respectively. In addition, lipid content of 28.9% and lipid productivity of 94.4 mg L−1 day−1 were obtained. Conclusions Scenedesmus sp. Z-4 had good adaptability to low temperature conditions, and showed great potential to realize simultaneous wastewater treatment and lipid production at low temperatures. The proposed approach in the study was simple compared to other wastewater treatment methods, and this potential novel process was still efficient to remove COD, N, and P at low temperatures. Thus, it had a vital significance for the wastewater treatment in low temperature regions.

Ethanol-type fermentation is one of three main fermentation types in the acidogenesis of anaerobic treatment systems. Non-spore-forming Ethanoligenens is as a typical genus capable of ethanol-type fermentation in mixed culture (i.e. acetate-ethanol fermentation). This genus can produce ethanol, acetate, CO2, and H2 using carbohydrates, and has application potential in anaerobic bioprocesses. Here, the complete genome sequences and methylome of Ethanoligenens harbinense strains with different autoaggregative and coaggregative abilities were obtained using the PacBio single-molecule real-time sequencing platform. The genome size of E. harbinense strains was about 2.97–3.10 Mb with 55.5% G+C content. 3020–3153 genes were annotated, most of which were methylated at specific sites or motifs. The methylation types included 6mA, 4mC, and unknown types. Comparative genomic analysis demonstrated low levels of genetic similarity between E. harbinense and other well-known hydrogen-producing bacteria (i.e., Clostridium and Thermoanaerobacter) in phylogenesis. Hydrogen production of E. harbinense was catalyzed by genes that encode [FeFe]‑hydrogenases and that were synthesized by three maturases of [FeFe]-H2ase. The metabolic mechanism of H2-ethanol co-production fermentation, catalyzed by pyruvate ferredoxin oxidoreductase was proposed. This study provides genetic and evolutionary information of a model genus for the further investigation of the metabolic pathway and regulatory network of ethanol-type fermentation and anaerobic bioprocesses for waste or wastewater treatment. Keywords: Ethanol-type fermentation, Ethanoligenens harbinense, Genome, Hydrogen-producing bacteria, Single molecule DNA sequencing, DNA methylation

p-Nitrophenol (PNP) is common in the wastewater from many chemical industries. In this study, we investigated the effect of initial concentrations of PNP and glucose and applied voltage on PNP reduction in biocathode BESs and open-circuit biocathode BESs (OC-BES). The PNP degradation efficiency of a biocathode BES with 0.5 V (Bioc-0.5) reached 99.5 ± 0.8%, which was higher than the degradation efficiency of the BES with 0 V (Bioc-0) (62.4 ± 4.5%) and the OC-BES (59.2 ± 12.5%). The PNP degradation rate constant (kPNP) of Bioc-0.5 was 0.13 ± 0.01 h-1, which was higher than the kPNP of Bioc-0 (0.024 ± 0.002 h-1) and OC-BES (0.013 ± 0.0005 h-1). PNP degradation depended on the initial concentrations of glucose and PNP. A glucose concentration of 0.5 g L-1 was best for PNP degradation. The initial PNP increased from 50 to 130 mg L-1 and the kPNP decreased from 0.093 ± 0.008 to 0.027 ± 0.001 h-1. High-throughput sequencing of 16S rRNA gene amplicons indicated differences in microbial community structure between BESs with different voltages and the OC-BES. The predominant populations were affiliated with Streptococcus (42.7%) and Citrobacter (54.1%) in biocathode biofilms of BESs, and Dysgonomonas were the predominant microorganisms in biocathode biofilms of OC-BESs. The predominant populations were different among the cathode biofilms and the suspensions. These results demonstrated that applied voltage and biocathode biofilms play important roles in PNP degradation.

The operation of a wastewater treatment plant (WWTP) is a typical complex control problem, with nonlinear dynamics and coupling effects among the variables, which renders the implementation of real-time optimal control an enormous challenge. In this study, a Q-learning algorithm with activated sludge model No. 2d-guided (ASM2d-guided) reward setting (an integrated ASM2d-QL algorithm) is proposed, and the widely applied anaerobic-anoxic-oxic (AAO) system is chosen as the research paradigm. The integrated ASM2d-QL algorithms equipped with a self-learning mechanism are derived for optimizing the control strategies (hydraulic retention time (HRT) and internal recycling ratio (IRR)) of the AAO system. To optimize the control strategies of the AAO system under varying influent loads, Q matrixes were built for both HRTs and IRR optimization through the pair of based on the integrated ASM2d-QL algorithm. 8 days of actual influent qualities of a certain municipal AAO wastewater treatment plant in June were arbitrarily chosen as the influent concentrations for model verification. Good agreement between the values of the model simulations and experimental results indicated that this proposed integrated ASM2d-QL algorithm performed properly and successfully realized intelligent modeling and stable optimal control strategies under fluctuating influent loads during wastewater treatment.

For the life cycle assessment (LCA) of wastewater management, eutrophication is considered the most relevant factor. However, eutrophication is not the only pathway through which wastewater influences the environment, and merely characterizing eutrophication potential is not sufficient for the LCA framework to reflect the influence of wastewater. This study defines the Bacterial Depletion of Oxygen (BDO)—a new impact category that represents the oxygen depleting potential caused by the growth of microorganisms—and characterization models and characterization factors are developed for the application of BDO. Water quality models (both one- and two-dimensional) are incorporated into the BDO characterization models so that the LCA framework includes some spatially differentiated factors, and can be used to estimate the direct impact of wastewater on receiving environment (IBDO value). Based on three case studies, this study demonstrates how the BDO category can be applied for the evaluation of wastewater management. Results show that increases in the downstream distance and self-purification coefficients reduce the IBDO value, whereas the increase in water velocity raises the IBDO value. Future integration of the BDO category with water quality models must link the dilution effect of water bodies, the environmental carrying capacity of receiving water, and the distribution of water pollutants in eutrophication and bacterial oxygen depletion.

The optimization of operational parameters for enhanced naphthalene degradation by TiO2/Fe3O4-SiO2 (TFS) photocatalyst was conducted using statistical experimental design and analysis. Central composite design method of response surface methodology (RSM) was adopted to investigate the optimum value of the selected factors for achieving maximum naphthalene degradation. Experimental results showed that irradiation time, pH, and TFS photocatalyst loading had significant influence on naphthalene degradation and the maximum degradation rate of 97.39% was predicted when the operational parameters were irradiation time 97.1 min, pH 2.1, and catalyst loading 0.962 g/L, respectively. The results were further verified by repeated experiments under optimal conditions. The excellent correlation between predicted and measured values further confirmed the validity and practicability of this statistical optimum strategy.

Defect engineering is an effective strategy to boost the catalytic activity of MXene towards heterogeneous peroxymonosulfate (PMS) activation for water decontamination. Herein, we developed a facile approach to fine-tune the generation of oxygen vacancies (OVs) on Ti3CNTx crystals by Ce-doping (Ce-Ti3CNTx) with the aim of mediating PMS activation for the degradation of micropollutants in water. By varying the dopant content, the OV concentrations of Ti3CNTx could be varied to enable the activation of PMS to almost 100% singlet oxygen (¹O2), and hence the effective degradation of sulfamethoxazole (SMX, a model micropollutant). Various advanced characterization techniques were employed to obtain detailed information on the microstructure, morphology, and defect states of the catalysts. The experimental results showed that SMX removal was proportional to the OVs level. Density functional theory (DFT) models demonstrated that, in contrast to pristine Ti3CNTx, the OVs on 10%Ce-Ti3CNTx could adsorb the terminal O of PMS, which facilitated the formation of SO5•- as well as the generation of ¹O2. We further loaded the optimized catalysts onto a polytetrafluoroethylene microfiltration membrane and also demonstrated the efficient removal of SMX from water using a convection-enhanced mass transport flowthrough configuration. This study provides new insights into the effective removal of micropollutants from water by integrating state-of-the-art defect engineering, advanced oxidation, and microfiltration techniques. [ABSTRACT FROM AUTHOR]