Search

Photoexcited molecular trajectories on potential energy surfaces (PESs) prior to thermalization are intimately connected to the photochemical reaction outcome. The excited-state trajectories of a diplatinum complex featuring photo-activated metal–metal σ-bond formation and associated Pt−Pt stretching motions were detected in real time using femtosecond wide-angle X-ray solution scattering. The observed motions correspond well with coherent vibrational wavepacket motions detected by femtosecond optical transient absorption. Two key coordinates for intersystem crossing have been identified, the Pt−Pt bond length and the orientation of the ligands coordinated with the platinum centers, along which the excited-state trajectories can be projected onto the calculated PESs of the excited states. This investigation has gleaned novel insight into electronic transitions occurring on the time scales of vibrational motions measured in real time, revealing ultrafast nonadiabatic or non-equilibrium processes along excited-state trajectories involving multiple excited-state PESs.

Closed-loop, autonomous experimentation enables accelerated and material-efficient exploration of large reaction spaces without the need for user intervention. However, autonomous exploration of advanced materials with complex, multi-step processes and data sparse environments remains a challenge. In this work, we present AlphaFlow, a self-driven fluidic lab capable of autonomous discovery of complex multi-step chemistries. AlphaFlow uses reinforcement learning integrated with a modular microdroplet reactor capable of performing reaction steps with variable sequence, phase separation, washing, and continuous in-situ spectral monitoring. To demonstrate the power of reinforcement learning toward high dimensionality multi-step chemistries, we use AlphaFlow to discover and optimize synthetic routes for shell-growth of core-shell semiconductor nanoparticles, inspired by colloidal atomic layer deposition (cALD). Without prior knowledge of conventional cALD parameters, AlphaFlow successfully identified and optimized a novel multi-step reaction route, with up to 40 parameters, that outperformed conventional sequences. Through this work, we demonstrate the capabilities of closed-loop, reinforcement learning-guided systems in exploring and solving challenges in multi-step nanoparticle syntheses, while relying solely on in-house generated data from a miniaturized microfluidic platform. Further application of AlphaFlow in multi-step chemistries beyond cALD can lead to accelerated fundamental knowledge generation as well as synthetic route discoveries and optimization.

Summary Natural systems drive the high-energy reactions of photosynthesis with efficient and broadband energy capture. Transition-metal photocatalysts similarly convert light into chemical reactivity, and yet suffer from light-limited operation and require blue-to-UV excitation. In photosynthesis, both light capture and reactivity have been optimized by separation into distinct sites. Inspired by this modular architecture, we synthesized a biohybrid photocatalyst by covalent attachment of the photosynthetic light-harvesting protein R-phycoerythrin (RPE) to the transition-metal photocatalyst tris(2,2′-bipyridine)ruthenium(II) ([Ru(bpy)3]2+). Spectroscopic investigation found that absorbed photoenergy was efficiently funneled from RPE to [Ru(bpy)3]2+. The utility of the biohybrid photocatalyst was demonstrated via an increase in yields for a thiol-ene coupling reaction and a cysteinyl-desulfurization reaction, including recovered reactivity at red wavelengths where [Ru(bpy)3]2+ alone does not absorb.

A series of platinum(II) bimetallic complexes were studied to investigate the effects of ligands on both the geometric and electronic structure. Modulating the Pt-Pt distance through the bridging ligand architecture was found to dictate the nature of the lowest energy electronic transitions, localized in one-half of the molecule or delocalized across the entire molecule. By reducing the separation between the platinum atoms, the lowest energy electronic transitions will be dominated by the metal-metal-to-ligand charge transfer transition. Conversely, by increasing the distance between the platinum atoms, the lowest electronic transition will be largely localized metal-to-ligand charge transfer or ligand centered in nature. Additionally, the cyclometalating ligands were observed to have a noticeable stabilizing effect on the triplet excited states as the conjugation increased, arising from geometric reorientation and increased electron delocalization of the ligands. Such stabilization of the triplet state energy has been shown to alter the excited state potential energy landscape as well as the excited state trajectory.

Conventional wisdom posits that spin-triplet energy transfer (TET) is only operative over short distances because Dexter-type electronic coupling for TET rapidly decreases with increasing donor acceptor separation. While coherent mechanisms such as super-exchange can enhance the magnitude of electronic coupling, they are equally attenuated with distance. Here, we report endothermic charge-transfer-mediated TET as an alternative mechanism featuring shallow distance-dependence and experimentally demonstrated it using a linked nanocrystal-polyacene donor acceptor pair. Donor-acceptor electronic coupling is quantitatively controlled through wavefunction leakage out of the core/shell semiconductor nanocrystals, while the charge/energy transfer driving force is conserved. Attenuation of the TET rate as a function of shell thickness clearly follows the trend of hole probability density on nanocrystal surfaces rather than the product of electron and hole densities, consistent with endothermic hole-transfer-mediated TET. The shallow distance-dependence afforded by this mechanism enables efficient TET across distances well beyond the nominal range of Dexter or super-exchange paradigms., Spin-triplet energy transfer in molecular systems underlies important applications for chemistry and devices. Here, the authors investigate the triplet energy transfer in CdSe quantum dots with varying ZnS shell thicknesses to surface-anchored anthracene molecules and identify a stepwise mechanism mediated by endothermic charge-transfer states.

Despite its enormous utility in structural characterization, nuclear magnetic resonance (NMR) spectroscopy is inherently limited by low spin polarization. One method to address the low polarization is

Developments in the field of photoredox catalysis that leveraged the long-lived excited states of Ir(III) and Ru(II) photosensitizers to enable radical coupling processes paved the way for explorations of synthetic transformations that would otherwise remain unrealized. While first row transition metal photocatalysts have not been as extensively investigated, valuable synthetic transformations covering broad scopes of olefin functionalization have been recently reported featuring photoactivated chlorobis(phenanthroline) Cu(II) complexes. In this study, the photochemical processes underpinning the catalytic activity of [Cu(dmp)2Cl]Cl (dmp = 2,9-dimethyl-1,10-phenanthroline) were studied. The combined results from static spectroscopic measurements and conventional photochemistry, ultrafast transient absorption, and electron paramagnetic resonance spin trapping experiments strongly support blue light (λex = 427 or 470 nm)-induced Cu-Cl homolytic bond cleavage in [Cu(dmp)2Cl]+ occurring in

Metal-free chromophores that efficiently generate triplet excited states represent promising alternatives with respect to transition metal-containing photosensitizers, such as those featuring metal-to-ligand charge transfer excited states. However, such molecular constructs have remained underexplored due to the unclear relationship(s) between molecular structure and efficient/rapid intersystem crossing. In this regard, we present a series of three thionated perinone chromophores serving as a newly conceived class of heavy metal-free triplet photosensitizers. We demonstrate that thionation of the lone C═O substituent in each highly fluorescent perinone imparts red-shifted absorbance bands that maintain intense extinction coefficients across the visible spectrum, as well as unusually efficient triplet excited state formation as inferred from the measured singlet O2 quantum yields at 1270 nm (ΦΔ = 0.78-1.0). Electronic structure calculations revealed the emergence of a low energy S1 (n → π*) excited state in the proximity of a slightly higher energy S2 (π → π*) excited state. The distinct character in each of the two lowest-lying singlet state manifolds resulted in the energetic inversion of the corresponding triplet excited states due to differences in electron exchange interactions. Rapid S1 → T1 intersystem crossing was thereby facilitated in this manner through spin-orbit coupling as predicted by the El Sayed rules. The lifetimes of the resultant triplet excited states persisted into the microsecond time regime, as measured by transient absorbance spectroscopy, enabling effective bimolecular triplet sensitization of some common polycyclic aromatic hydrocarbons. The synthetically facile interchange of a single O atom to an S atom in the investigated perinones resulted in marked changes to their photophysical properties, namely, conversion of dominant singlet state fluorescence in the former to long-lived triplet excited states in the latter. The combined results suggest a general strategy for accessing long-lived triplet excited states in organic chromophores featuring a lone C═O moiety residing within its structure, valuable for the design of metal-free triplet photosensitizers.

Advances in chemical control of the photophysical properties of transition-metal complexes are revolutionizing a wide range of technologies, particularly photocatalysis and light-emitting diodes, but they rely heavily on molecules containing precious metals such as ruthenium and iridium. Although the application of earth-abundant ‘early’ transition metals in photosensitizers is clearly advantageous, a detailed understanding of excited states with ligand-to-metal charge transfer (LMCT) character is paramount to account for their distinct electron configurations. Here we report an air- and moisture-stable, visible light-absorbing Zr(iv) photosensitizer, Zr(MesPDPPh)2, where [MesPDPPh]2− is the doubly deprotonated form of [2,6-bis(5-(2,4,6-trimethylphenyl)-3-phenyl-1H-pyrrol-2-yl)pyridine]. This molecule has an exceptionally long-lived triplet LMCT excited state (τ = 350 μs), featuring highly efficient photoluminescence emission (Ф = 0.45) due to thermally activated delayed fluorescence emanating from the higher-lying singlet configuration with significant LMCT contributions. Zr(MesPDPPh)2 engages in numerous photoredox catalytic processes and triplet energy transfer. Our investigation provides a blueprint for future photosensitizer development featuring early transition metals and excited states with significant LMCT contributions. Understanding the photophysical properties of transition-metal complexes is paramount to advances in photocatalysis, solar energy conversion and light-emitting diodes. Now, long-lived emission via thermally activated delayed fluorescence has been demonstrated from an air- and water-stable zirconium complex featuring excited states with significant ligand-to-metal charge transfer character.

Synthetic organic chemistry has seen major advances due to the merger of nickel and photoredox catalysis. A growing number of Ni-photoredox reactions are proposed to involve generation of excited nickel species, sometimes even in the absence of a photoredox catalyst. To gain insights about these excited states, two of our groups previously studied the photophysics of Ni(t-Bubpy)(o-Tol)Cl, which is representative of proposed intermediates in many Ni-photoredox reactions. This complex was found to have a long-lived excited state (τ = 4 ns), which was computationally assigned as a metal-to-ligand charge transfer (MLCT) state with an energy of 1.6 eV (38 kcal/mol). This work evaluates the computational assignment experimentally using a series of related complexes. Ultrafast UV-Vis and mid-IR transient absorption data suggest that a MLCT state is generated initially upon excitation but decays to a long-lived state that is 3d-d rather than 3MLCT in character. Dynamic cis,trans-isomerization of the square planar complexes was observed in the dark using 1H NMR techniques, supporting that this 3d-d state is tetrahedral and accessible at ambient temperature. Through a combination of transient absorption and NMR studies, the 3d-d state was determined to lie ∼0.5 eV (12 kcal/mol) above the ground state. Because the 3d-d state features a weak Ni-aryl bond, the excited Ni(II) complexes can undergo Ni homolysis to generate aryl radicals and Ni(I), both of which are supported experimentally. Thus, photoinduced Ni-aryl homolysis offers a novel mechanism of initiating catalysis by Ni(I).

Aryl halides are a fundamental motif in synthetic chemistry, playing a critical role in metal-mediated cross-coupling reactions and serving as important scaffolds in drug discovery. Although thermal decarboxylative functionalization of aryl carboxylic acids has been extensively explored, the scope of existing halodecarboxylation methods remains limited, and there currently exists no unified strategy that provides access to any type of aryl halide from an aryl carboxylic acid precursor. Herein, we report a general catalytic method for direct decarboxylative halogenation of (hetero)aryl carboxylic acids via ligand-to-metal charge transfer. This strategy accommodates an exceptionally broad scope of substrates. We leverage an aryl radical intermediate toward divergent functionalization pathways: (1) atom transfer to access bromo- or iodo(hetero)arenes or (2) radical capture by copper and subsequent reductive elimination to generate chloro- or fluoro(hetero)arenes. The proposed ligand-to-metal charge transfer mechanism is supported through an array of spectroscopic studies.

Interactions between metal centers in dimeric transition metal complexes (TMCs) play important roles in their excited-state energetics and pathways and, thus, affect their photophysical properties relevant to their applications, for example, photoluminescent materials and photocatalysis. Here, we report electronic and nuclear structural dynamics studies of two photoexcited pyrazolate-bridged [Pt(ppy)(μ-R2pz)]2-type Pt(II) dimers (ppy = 2-phenylpyridine, μ-R2pz = 3,5-substituted pyrazolate): [Pt(ppy)(μ-H2pz)]2 (1) and [Pt(NDI-ppy)(μ-Ph2pz)]2 (2, NDI = 1,4,5,8-naphthalenediimide), both of which have distinct ground-state Pt-Pt distances. X-ray transient absorption (XTA) spectroscopy at the Pt LIII-edge revealed a new d-orbital vacancy due to the one-electron oxidation of the Pt centers in 1 and 2. However, while a transient Pt-Pt contraction was observed in 2, such an effect was completely absent in 1, demonstrating how the excited states of these complexes are determined by the overlap of the Pt (dz2) orbitals, which is tuned by the steric bulk of the pyrazolate R-groups in the 3- and 5-positions. In tandem with analysis of the Pt-Pt distance structural parameter, we observed photoinduced electron transfer in 2 featuring a covalently linked NDI acceptor on the ppy ligand. The formation and subsequent decay of the NDI radical anion absorption signals were detected upon photoexcitation using optical transient absorption spectroscopy. The NDI radical anion decayed on the same time scale, hundreds of picoseconds, as that of the d-orbital vacancy signal of the oxidized Pt-Pt core observed in the XTA measurements. The data indicated an ultrafast formation of the charge-separated state and subsequent charge recombination to the original Pt(II-II) species.

A cyclometalated Ir(III) diimine complex [Ir(NBI)2(phen)]PF6, NBI = 1,8-naphthalenebenzimidizole and phen = 1,10-phenanthroline, exhibits excellent photostability as a sensitizer in a three-compone...

In this work, a series of nine Re(i) diimine dicarbonyl complexes of the general molecular formula cis-[Re(N^N)2(CO)2]+ (N^N are various 2,2'-bipyridine (bpy) or 1,10-phenanthroline (phen) derivatives) were prepared and spectroscopically investigated to systematically evaluate the photophysical consequences of various substituents resident on the diimine ligands. These panchromatic absorbing chromophores were structurally characterized, evaluated for their electrochemical and spectroelectrochemical properties, and investigated using static and dynamic electronic absorption, photoluminescence (PL), and infrared spectroscopy from ultrafast to supra-nanosecond time scales. The ultrafast time-resolved infrared (TRIR) analysis was further supported by electronic structure calculations which characterized the changes within the two C[triple bond, length as m-dash]O vibrational modes upon formation of the metal-to-ligand charge transfer (MLCT) excited state. The MLCT excited state decay of this series of dicarbonyl molecules appears completely consistent with energy-gap law behavior, where the nonradiative decay rate constants increase logarithmically with decreasing excited state - ground state energy separation, except in anticipated cases where the substituents were phenyl or tert-butyl.

Many fundamental questions remain in the elucidation of energy migration mechanisms across the interface between semiconductor nanomaterials and molecular chromophores. The present transient absorption study focuses on PbS quantum dots (QDs) of variable size and band-edge exciton energy (ranging from 1.15 to 1.54 eV) post-synthetically modified with a carboxylic acid-functionalized TIPS-pentacene derivative (TPn) serving as the molecular triplet acceptor. In all instances, selective excitation of the PbS NCs at 743 nm leads to QD size-dependent formation of an intermediate with time constants ranging from 2–13 ps, uncorrelated to the PbS QD valence band potential. However, the rate constant for the delayed formation of the TPn triplet excited state markedly increases with increasing PbS conduction band energy, featuring a parabolic Marcus free energy dependence in the normal region. These observations provide evidence of an indirect triplet sensitization process being inconsistent with a concerted Dexter-like energy transfer process. The collective data are consistent with the generation of an intermediate resulting from hole trapping of the initial PbS excited state by midgap states, followed by formation of the TPn triplet excited state whose rate constant and yield increases with decreasing quantum dot size.

The manipulation of the triplet excited state manifold leads to large differences in the photophysical properties within a given class of metal–organic chromophores. By the appropriate choice of ancillary ligand, large changes can be made both to the order and nature of the lowest excited states and therefore to the resulting photophysical properties. Herein, a series of four bis-2-phenylpyridine (ppy) cyclometalated Ir(III) compounds bearing two arylisocyanide ligands were synthesized and photophysically characterized to understand the effects of using ancillary ligands featuring systematic changes in π-conjugation. By varying the arylisocyanide ligands, the photoluminescence quantum yield ranged from 5% to 49% and the excited state lifetime ranged between 24 μs and 2 ms. These variations in photophysical response are consistent with lowering the triplet ligand-centered (3LC) state of the arylisocyanide ligand as the π system was extended, confirmed by 77 K photoluminescence emission spectra and ultrafast transient absorption experiments. The latter analysis gleaned detailed insight into the importance of the interplay of the 3LC state of the phenylpyridine and arylisocyanide ligands in these polychromophic Ir(III) molecules.

The impact of moisture and heat treatment on the microstructural, chemical, and electrical properties of Cu(In,Ga)Se2 films and their collective effect on the solar cell device performance was studied. X-ray photoelectron spectroscopy and secondary ion mass spectroscopy measurements show that water exposure causes surface modification and alters the alkali metal distribution, while no composition or structural effect was observed. Deep level transient and optical spectroscopies revealed that the trap densities ( NT ) for both the EV + 0.65 eV and EV + 0.98 eV traps increase after water exposure, while the majority carrier concentration ( NA ) decreases. Time-resolved photoluminescence (PL) and steady-state PL measurements indicated the presence of static, not dynamic, quenching. Reduction of open-circuit voltage ( V OC) and fill factor (FF) was observed for the devices but was not associated with a change of recombination mechanism, which remains in the absorber space charge region. A small increase in series resistance and shunt conductance accounts for most of the FF change, while the modification in both NA and NT yield most of the change in V OC. A gradient of majority carrier concentration, related to the alkali profile, also yields a small voltage-dependent current collection after moisture and heat treatment.

We present a series of four transition-metal complexes based on the rhenium(I) tricarbonyl 1,10-phenanthroline (phen) template, with a lone ancillary arylisocyanide (CNAr) ligand to yield metal-organic chromophores of the generic molecular formula [Re(phen)(CO)

Aryl carboxylic acids are valuable, stable, and abundant functional handles in organic synthesis. Historically, their activation with established two-electron methods requires forcing conditions, and such protocols are limited in scope. In contrast, we envisioned that copper’s ability to generate open-shell species through ligand-to-metal charge transfer (LMCT), combined with its unique capacity to act as a potential aroyloxy and aryl radical reservoir, could mediate facile light- and copper-enabled aromatic decarboxylative functionalization by mitigating undesired reactivity of radical intermediates formed during aromatic decarboxylation. We report herein a general copper-LMCT open-shell activation platform for aromatic halodecarboxylation. Catalytic decarboxylative chlorination, bromination, and iodination of diverse (hetero)aryl carboxylic acids have been achieved to provide broadly used electrophilic cross-coupling handles from widely available aromatic acid precursors. Notably, decarboxylative fluorination of aryl carboxylic acids ­– a long-standing challenge in the field of organic synthesis – is readily accessible over a wide breadth of (hetero)aryl substrates. Ultrafast transient absorption (TA) spectroscopy experiments in combination with steady-state UV-vis spectroscopy studies are consistent with the proposed copper-LMCT mechanism, supporting the mechanistic basis of this activation platform.

The current investigation demonstrates highly efficient photochemical upconversion (UC) where a long-lived Zr(iv) ligand-to-metal charge transfer (LMCT) complex serves as a triplet photosensitizer in concert with well-established 9,10-diphenylanthracene (DPA) along with newly conceived DPA–carbazole based acceptors/annihilators in THF solutions. The initial dynamic triplet–triplet energy transfer (TTET) processes (ΔG ∼ −0.19 eV) featured very large Stern–Volmer quenching constants (KSV) approaching or achieving 105 M−1 with bimolecular rate constants between 2 and 3 × 108 M−1 s−1 as ascertained using static and transient spectroscopic techniques. Both the TTET and subsequent triplet–triplet annihilation (TTA) processes were verified and throughly investigated using transient absorption spectroscopy. The Stern–Volmer metrics support 95% quenching of the Zr(iv) photosensitizer using modest concentrations (0.25 mM) of the various acceptor/annihilators, where no aggregation took place between any of the chromophores in THF. Each of the upconverting formulations operated with continuous-wave linear incident power dependence (λex = 514.5 nm) down to ultralow excitation power densities under optimized experimental conditions. Impressive record-setting ηUC values ranging from 31.7% to 42.7% were achieved under excitation conditions (13 mW cm−2) below that of solar flux integrated across the Zr(iv) photosensitizer's absorption band (26.7 mW cm−2). This study illustrates the importance of supporting the continued development and discovery of molecular-based triplet photosensitizers based on earth-abundant metals., The LMCT photosensitizer Zr(MesPDPPh)2 paired with DPA-based acceptors enabled low power threshold photochemical upconversion with record-setting quantum efficiencies.

Background: In the CARD study (NCT02485691), cabazitaxel significantly improved median radiographic progression-free survival (rPFS) and overall survival (OS) versus abiraterone/enzalutamide in patients with metastatic castration-resistant prostate cancer (mCRPC) who had previously received docetaxel and progressed = 70 yr) and younger (= 70 yr (median 76 yr). Cabazitaxel, compared with abiraterone/enzalutamide, significantly improved median rPFS in older (8.2 vs 4.5 mo; hazard ratio [HR] = 0.58; 95% confidence interval [CI] = 0.38-0.89; p = 0.012) and younger (7.4 vs 3.2 mo; HR = 0.47; 95% CI = 0.30-0.74; p < 0.001) patients. The median OS of cabazitaxel versus abiraterone/enzalutamide was 13.9 versus 9.4 mo in older patients (HR = 0.66; 95% CI = 0.41-1.06; p = 0.084), and it was 13.6 versus 11.8 mo in younger patients (HR = 0.66; 95% CI = 0.41-1.08; p = 0.093). Progression-free survival, prostate-specific antigen, and tumor and pain responses favored cabazitaxel, regardless of age. Grade >= 3 treatment-emergent adverse events (TEAEs) occurred in 58% versus 49% of older patients receiving cabazitaxel versus abiraterone/enzalutamide and 48% versus 42% of younger patients. In older patients, cardiac adverse events were more frequent with abiraterone/enzalutamide; asthenia and diarrhea were more frequent with cabazitaxel. Conclusions: Cabazitaxel improved efficacy outcomes versus abiraterone/enzalutamide in patients with mCRPC after prior docetaxel and abiraterone/enzalutamide, regardless of age. TEAEs were more frequent among older patients. The cabazitaxel safety profile was manageable across age groups. Patient summary: Clinical trial data showed that cabazitaxel improved survival versus abiraterone/enzalutamide with manageable side effects in patients with metastatic castration-resistant prostate cancer who had previously received docetaxel and the alternative agent (abiraterone/enzalutamide), irrespective of age. (C) 2021 Published by Elsevier B.V. on behalf of European Association of Urology.

Thermally activated photophysical processes are ubiquitous in numerous organic and metal-organic molecules, leading to chromophores with excited-state properties that can be considered an equilibrium mixture of the available low-lying states. Relative populations of the equilibrated states are governed by temperature. Such molecules have been devised as high quantum yield emitters in modern organic light-emitting diode technology and for deterministic excited-state lifetime control to enhance chemical reactivity in solar energy conversion and photocatalytic schemes. The recent discovery of thermally activated photophysics at CdSe nanocrystal-molecule interfaces enables a new paradigm wherein molecule-quantum dot constructs are used to systematically generate material with predetermined photophysical response and excited-state properties. Semiconductor nanomaterials feature size-tunable energy level engineering, which considerably expands the purview of thermally activated photophysics beyond what is possible using only molecules. This Perspective is intended to provide a nonexhaustive overview of the advances that led to the integration of semiconductor quantum dots in thermally activated delayed photoluminescence (TADPL) schemes and to identify important challenges moving into the future. The initial establishment of excited-state lifetime extension utilizing triplet-triplet excited-state equilibria is detailed. Next, advances involving the rational design of molecules composed of both metal-containing and organic-based chromophores that produce the desired TADPL are described. Finally, the recent introduction of semiconductor nanomaterials into hybrid TADPL constructs is discussed, paving the way toward the realization of fine-tuned deterministic control of excited-state decay. It is envisioned that libraries of synthetically facile composites will be broadly deployed as photosensitizers and light emitters for numerous synthetic and optoelectronic applications in the near future.

We present the synthesis, structural characterization, electronic structure calculations, and ultrafast and supra-nanosecond photophysical properties of a series of five Re(I) bichromophores exhibiting metal to ligand charge transfer (MLCT) excited states based on the general formula fac-[Re(N∧N)(CO)3(PNI-py)]PF6, where PNI-py is 4-piperidinyl-1,8-naphthalimidepyridine and N∧N is a diimine ligand (Re1-5), along with their corresponding model chromophores where 4-ethylpyridine was substituted for PNI-py (Mod1-5). The diimine ligands used include 1,10-phenanthroline (phen, 1), 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (bcp, 2), 4,4'-di-tert-butyl-2,2'-bipyridine (dtbb, 3), 4,4'-diethyl ester-2,2'-bipyridine (deeb, 4), and 2,2'-biquinoline (biq, 5). In these metal-organic bichromophores, structural modification of the diimine ligand resulted in substantial changes to the observed energy transfer efficiencies between the two chromophores as a result of the variation in 3MLCT excited-state energies. The photophysical properties and energetic pathways of the model chromophores were investigated in parallel to accurately track the changes that arose from introduction of the organic chromophore pendant on the ancillary ligand. All relevant photophysical and energy transfer processes were probed and characterized using time-resolved photoluminescence spectroscopy, ultrafast and nanosecond transient absorption spectroscopy, and time-dependent density functional theory calculations. Of the five bichromophores in this study, four (Re1-4) exhibited a thermal equilibrium between the 3PNI-py and the 3MLCT excited state, drastically extending the lifetimes of the parent model chromophores.

In this paper, we studied the effect of rubidium fluoride (RbF) post-deposition treatment (PDT) on the properties of Cu(In,Ga)Se2 (CIGS) solar cells. Specifically, the recombination mechanisms were analyzed by a series of characterizations including thermal and optical defect spectroscopies, temperature dependent current density–voltage measurements, and time resolved photoluminescence. It was found that the main effect of RbF PDT on the solar cell was an increase of the open circuit-voltage, $V_{{\text{oc}}}$ , by 30 mV due to a decrease of the values of the diode quality factor and reverse saturation current. Recombination mechanisms were identified as being in the CIGS space charge region, likely at the grain boundaries and near the CIGS surface. Breakdown of contributions to the $V_{{\text{oc}}}$ increase showed that part of it is due to an increase of the majority carrier concentration (16 mV) and another to the increase in the minority carrier lifetime (1 mV). The latest is mostly due to a reduction in the EV+0.99 eV deep-level trap density. An additional CIGS surface modification (contributing 13 mV), observed by the secondary ion mass spectrometry, is essential to explain the full change in $V_{{\text{oc}}}$ .

Strong evidence of concentration-induced and dissolved electrolyte-induced chromophore aggregation has been universally observed in numerous water soluble bis-cyclometalated Ir(III) photosensitizers bearing the sulfonated diimine ligands bathophenanthroline disulfonate and bathocuproine disulfonate. This new class of aqueous-based soft materials was highly photoluminescent in their aggregated state where detailed spectroscopic investigations of this phenomenon revealed significant blue shifts of their respective photoluminescence emission spectra with concomitant increases in excited-state lifetimes and quantum yields initiating even at micromolar chromophore concentrations in water or upon the addition of a strong electrolyte. A combination of nanoscale particle characterization techniques, static and dynamic photoluminescence spectroscopic studies, along with atomistic molecular dynamics (MD) simulations of these soft materials suggests the formation of small, heterogeneous nanoaggregate structures, wherein the sulfonated diimine ancillary ligand serves as a pro-aggregating subunit in all instances. Importantly, the experimental and MD findings suggest the likelihood of discovering similar aqueous aggregation phenomena occurring in all transition-metal complexes bearing these water-solubilizing diimine ligands.

In this investigation, the synthesis and photophysical properties of a series of new chromophores featuring Pt(II) σ-bonded to perylenediimide (PDI) cores are reported. A Pt(PPh3)2X (X = Cl, Br) moiety was attached to PDI in either the ortho or the bay position (2- or 1-positions respectively) or a Pt(PPh3)2 subunit was used to bridge two bay positions (1- and 12-positions) forming a Pt(II) cyclometalate. Through a combination of steady-state and transient absorption and photoluminescence spectroscopy, the excited-state dynamics of these molecules were revealed, indicating that the Pt atom location on the PDI has a substantial impact on observed intersystem crossing (ISC) rates. The ISC time constants for the bay-substituted and cyclometalated PDIs are between 2.67 and 1.29 ns, respectively, determined by the singlet fluorescence decays from the initially populated singlet excited states. In the case of the ortho-substituted PDI, ISC to the triplet state occurs on the ultrafast time scale with a time cons...

A computationally inspired Cu(I) metal-to-ligand charge transfer (MLCT) chromophore, [Cu(sbmpep)2]+ (sbmpep = 2,9-di(sec-butyl)-3,8-dimethyl-4,7-di(phenylethynyl)-1,10-phenanthroline), was synthesized in seven total steps, prepared from either dichloro- or dibromophenanthroline precursors. Complete synthesis, structural characterization, and electrochemistry, in addition to static and dynamic photophysical properties of [Cu(sbmpep)2]+, are reported on all relevant time scales. UV–Vis absorption spectroscopy revealed significant increases in oscillator strength along with a concomitant bathochromic shift in the MLCT absorption bands with respect to structurally related model complexes (e = 16 500 M–1 cm–1 at 491 nm). Strong red photoluminescence (Φ = 2.7%, λmax = 687 nm) was observed from [Cu(sbmpep)2]+, which featured an average excited-state lifetime of 1.4 μs in deaerated dichloromethane. Cyclic and differential pulse voltammetry revealed ∼300 mV positive shifts in the measured one-electron reversible r...

The generation and transfer of triplet excitons across semiconductor nanomaterial-molecular interfaces will play an important role in emerging photonic and optoelectronic technologies, and understanding the rules that govern such phenomena is essential. The ability to cooperatively merge the photophysical properties of semiconductor quantum dots with those of well-understood and inexpensive molecular chromophores is therefore paramount. Here we show that 1-pyrenecarboxylic acid-functionalized CdSe quantum dots undergo thermally activated delayed photoluminescence. This phenomenon results from a near quantitative triplet-triplet energy transfer from the nanocrystals to 1-pyrenecarboxylic acid, producing a molecular triplet-state 'reservoir' that thermally repopulates the photoluminescent state of CdSe through endothermic reverse triplet-triplet energy transfer. The photoluminescence properties are systematically and predictably tuned through variation of the quantum dot-molecule energy gap, temperature and the triplet-excited-state lifetime of the molecular adsorbate. The concepts developed are likely to be applicable to semiconductor nanocrystals interfaced with molecular chromophores, enabling potential applications of their combined excited states.

The electronic structure and photophysical properties of two phosphorescent iridium(III) cyclometalated complexes is presented. The molecules were synthesized by cyclometalating the ligand 1,8-naphthalenebenzimidizole (NBI), to an iridium(III) metal center. Two NBI ligands were covalently attached along with a 1,10-phenanthroline (phen) ligand producing the [Ir(NBI)2(phen)](PF6) complex and three NBI ligands were used to prepare the corresponding tris-cyclometalate fac-Ir(NBI)3. The optical properties of these new Ir(III) molecules were investigated using density functional theory calculations, photoluminescence spectroscopy, and transient absorption spectroscopy. The molecules at the heart of this study were found to contain long-lived ligand-localized triplet excited states on the NBI species, featuring energies suitable for bimolecular photochemical reactions. Both iridium(III) chromophores possess excellent light absorptivity in the visible region of the spectrum with high photoluminescence quantum efficiencies approaching 30%.

When designing photoresponsive materials, the impact of a polymer host matrix on the photophysical and photochemical properties of chromophores can be dramatic and advantageous for correlating macromolecular properties. Some compounds possess changes in their photophysical response with variation in the surrounding media (e.g., crystalline glass vs solution). This study demonstrates how changes in the excited state dynamics of [Cu(dmp)2]+, where dmp = 2,9-dimethyl-1,10-phenanthroline, are used to quantitatively probe the viscosity of the surrounding polymer matrix. A correlation of both excited state lifetime and photoluminescence emission wavelength on viscosity was observed in different supramolecular materials containing [Cu(dmp)2]+. These effects were attributed to restricted photoinduced structural distortion of the Cu(I) complex as the polymer matrix hardened. This photoluminescence sensor features a greater dynamic range for viscosity sensing (6 orders of magnitude) and displayed larger changes in ...

We examined the intensity and anisotropy decays of DNA labeled with two ruthenium metal-ligand complexes, [Ru(bpy)(2)(dppz)](2+) and [Ru(phe)(2)(dppz)](2+). Both complexes display high emission anisotropies in the absence of rotational diffusion, making them suitable probes for rotational motions. When bound to DNA, these complexes display decay times as long as 294 ns, providing long-lived probes of DNA dynamics. The decay times of both complexes were rather insensitive to dissolved oxygen. We examined anisotropy decays of these complexes bound to B-form DNA. The anisotropy decays revealed correlation times near 10, 50, and several hundred nanoseconds, suggesting that these probes are sensitive to a wide range of DNA motions. The use of metal-ligand complexes should allow resolution of both the torsional and bending motions of DNA, the latter of which has been mostly inaccessible using shorter-lived fluorescent probes bound to DNA.

Polymerization reactions initiated by ultraviolet light are ubiquitous in scores of industrial applications but would markedly benefit from visible light activation to overcome stability, energy consumption, and sample geometry limitations. The current work leverages visible-light driven homomolecular triplet-triplet annihilation (TTA) in zinc(II) meso-tetraphenylporphyrin (ZnTPP) to initiate facile free-radical polymerization in trimethylolpropane triacrylate (TMPTA) monomers through ultrafast electron transfer quenching. Selective Q-band (S1) excitation of ZnTPP in the green or yellow (𝜆ex = 514.5 or 552 nm) sensitizes TTA occurring between two 3ZnTPP* energized chromophores, ultimately generating the highly reducing S2 excited state on one ZnTPP molecule (Ered = -2.13 V vs SCE). Subsequently, this S2 state engages in electron transfer with TMPTA, thereby initiating the radical polymerization process. Estimation of the free energy of the reaction combined with electrochemistry strongly suggest that electron transfer is only plausible from the S2 excited state of ZnTPP. Consistent with this hypothesis, the S1 and T1 excited states of ZnTPP showed no evidence of static or dynamic quenching by TMPTA. The bimolecular electron transfer was then verified by concentration-dependent dynamic fluorescence quenching of the ZnTPP S2 excited state using optically gated fluorescence upconversion measurements. In acetonitrile, this electron transfer was concentration-dependent, with time constants ranging between 2.57 ps to 1.04 ps, with TMPTA concentrations from 0 to 3.47 M, respectively. The dynamic bimolecular quenching rate constant (9.5 × 1011 M-1s-1, in toluene) was in the same order of magnitude with that obtained from static fluorescence measurements (3.2 × 1011 M-1s-1, in toluene). FT-IR spectroscopy confirmed visible light-initiated polymerization through monitoring consumption of the olefins in TMPTA as a function of photolysis time. EPR experiments, in conjunction with trapping radical species with 2-methyl-2-nitrosopropane (t-BuNO), identified that acrylate radicals were indeed formed through green light activation. Furthermore, we demonstrate that acrylate polymers of various macroscopic shapes as well as micron-scale objects can be produced using numerous low power visible light sources in the presence of only ZnTPP and TMPTA. These well-defined images represent the general applicability of homomolecular TTA mediated photoinitiated polymerization in both micro- and macrofabrication applications.

International audience; Polymerization reactions initiated by ultraviolet light are ubiquitous in scores of industrial applications but would markedly benefit from visible-light activation to overcome stability, energy consumption, light penetration, and sample geometry limitations The current work lever-ages visible-light-driven homomolecular triplet-triplet annihilation (TTA) in zinc(II) meso-tetraphenylporphyrin (ZnTPP) to initiate facile free-radical polymerization in trimethylolpropane triacrylate (TMPTA) and methyl acrylate (MA) monomers through ultrafast electron transfer quenching. Selective Q-band (S-1) excitation of ZnTPP in the green or yellow sensitizes TTA occurring between two (ZnTPP)-Zn-3* energized chromophores, ultimately generating the highly reducing S-2 excited state on one ZnTPP molecule (E-red = 2.13 V versus saturated calomel electrode, SCE). Subsequently, this S-2 state engages in electron transfer with TMPTA or MA, thereby initiating the radical polymerization process. Bimolecular electron transfer was confirmed through optically gated fluorescence upconversion. FT-IR and EPR spin-trapping experiments verified visible-light-initiated polymerization leading to the formation of well-defined macro- and microscopic objects.

The technology and applications of fluorescence spectroscopy are rapidly advancing. In this overview presentation we summarize some recent developments from this laboratory. Two and three-photon excitation have been observed for a wide variety of intrinsic and extrinsic fluorophores, including tryptophan, tyrosine, DNA stains, membrane probes, and even alkanes. It has been possible to observe multi-photon excitation of biopolymers without obvious photochemical or photo-thermal effects. Although not de-scribed in our lecture, another area of increasing interest is the use of engineered proteins for chemical and clinical sensing. We show results for the glucose—galactose binding protein from E. coli. The labeled protein shows spectral changes in response to micromolar concentrations of glucose. This protein was used with a novel sensing method based on the modulated emission of the labeled proteins and a long lifetime reference fluorophore. And finally, we describe a recently developed rhenium complex which displays a lifetime near 3 µs in oxygenated aqueous solution. Such long life-time probes allow detection of microsecond dynamic processes, bypassing the usual nanosecond timescale limit of fluorescence. The result of these developments in protein engineering, sensing methods, and metal—ligand probe chemistry will be the increased use of fluorescence in clinical chemistry and point-of-care analyses.

We present the synthesis, structural characterization, electronic structure calculations, and the ultrafast and supra-nanosecond photophysical properties of a series of five bichromophores of the general structural formula [Re(5-R-phen)(CO)

The mechanisms of triplet energy transfer across the inorganic nanocrystal/organic molecule interface remain poorly understood. Many seemingly contradictory results have been reported, mainly because of the complicated trap states characteristic of inorganic semiconductors and the ill-defined relative energetics between semiconductors and molecules used in these studies. Here we clarify the transfer mechanisms by performing combined transient absorption and photoluminescence measurements, both with sub-picosecond time resolution, on model systems comprising lead halide perovskite nanocrystals with very low surface trap densities as the triplet donor and polyacenes which either favour or prohibit charge transfer as the triplet acceptors. Hole transfer from nanocrystals to tetracene is energetically favoured, and hence triplet transfer proceeds via a charge separated state. In contrast, charge transfer to naphthalene is energetically unfavourable and spectroscopy shows direct triplet transfer from nanocrystals to naphthalene; nonetheless, this “direct” process could also be mediated by a high-energy, virtual charge-transfer state., Though literature reports models describing triplet energy transfer between inorganic semiconductors and organic molecules, a unified mechanism for this process is still lacking. Here, the authors report triplet energy transfer mechanism at lead halide perovskite nanocrystal/polyacene interfaces.

It is commonly accepted that a full bandgap voltage is required to achieving efficient electroluminescence (EL) in organic light-emitting diodes. In this work, we demonstrated organic molecules with a large singlet-triplet splitting can achieve efficient EL at voltages below the bandgap voltage. The EL originates from delayed fluorescence due to triplet fusion. Finally, in spite of a lower quantum efficiency, a blue fluorescent organic light-emitting diode having a power efficiency higher than some of the best thermally activated delayed fluorescent and phosphorescent blue organic light-emitting diodes is demonstrated. The current findings suggest that leveraging triplet fusion from purely organic molecules in organic light-emitting diode materials offers an alternative route to achieve stable and high efficiency blue organic light-emitting diodes., Though organic light-emitting diodes (OLEDs) with electroluminescence at sub-bandgap voltages have been reported, realizing high efficiency in such a device is difficult. Here, the authors report high efficiency sub-bandgap OLEDs featuring organic molecules with large singlet-triplet splitting.