Search

Electronic coherence signatures can be directly identified in the time-frequency maps measured in 2 dimensional spectroscopy (2DES). We demonstrate the theory and discuss the advantages of this approach by a detailed application to the fast femtosecond beatings of a wide variety of electronic coherences in dimers of size-dispersed (8%) 3nm quantum dots (QDs). The observed and computed results can be consistently characterized directly in the time-frequency domain by probing the polarization in a 2DES set-up. Experimental and computed time-frequency maps are found in very good agreement and several electronic coherences are characterized at room temperature in solution before extensive dephasing due to the size-dispersion kicks in. As compared to the frequency-frequency maps that are commonly used in 2DES, the time-frequency maps allow for exploiting electronic coherences without additional post processing and with fewer 2DES measurements. Towards quantum technology applications, we also report on the modeling of the time-frequency photocurrent response of these electronic coherences, which opens the way to integrating QD devices with classical architectures thereby enhancing the quantum advantage of such technologies for parallel information processing at room temperature.

The advantages of the directly measured time-frequency maps are discussed as a useful representation of the coherent output in a 2 dimensional electronic spectroscopy (2DES). We demonstrate the theory by a detailed application to the fast femtosecond beatings of a wide variety of electronic coherences in dimers of size-dispersed (9%) 3nm quantum dots (QDs). The observed and computed results can be consistently characterized directly in the time-frequency domain by probing the polarization in a 2DES set-up. Experimental and computed time-frequency maps are found in very good agreement and several electronic coherences are characterized at room temperature in solution before extensive dephasing due to the size-dispersion kicks in. As compared to the frequency-frequency maps that are commonly used in 2DES, the time-frequency maps allow for exploiting electronic coherences without additional post processing and with fewer 2DES measurements of polarization. Towards quantum technology applications, we also report on the modeling of the time-frequency photocurrent response of these electronic coherences, which opens the way to integrating QD devices with classical architectures thereby enhancing the quantum advantage of such technologies for parallel information processing at room temperature.

Carbon dots (CDs) are a family of fluorescent nanoparticles displaying a wide range of interesting properties, which make them attractive for potential applications in different fields like bioimaging, photocatalysis, and many others. However, despite many years of dedicated studies, wide variations exist in the literature concerning the reported photostability of CDs, and even the photoluminescence mechanism is still unclear. Furthermore, an increasing number of recent studies have highlighted the photobleaching (PB) of CDs under intense UV or visible light beams. PB phenomena need to be fully addressed to optimize practical uses of CDs and can also provide information on the fundamental mechanism underlying their fluorescence. Moreover, the lack of systematic studies comparing several types of CDs displaying different fluorescence properties represents another gap in the literature. In this study, we explored the optical properties of a full palette of CDs displaying a range from blue to red emissions, synthesized using different routes and varying precursors. We investigated the photostability of different CDs by observing in situ their time-resolved fluorescence degradation or optical absorption changes under equivalent experimental conditions and laser irradiation. The results about different PB kinetics clearly indicate that even CDs showing comparable emission properties may exhibit radically different resistances to PB, suggesting systematic connections between the resistance to PB, the characteristic spectral range of emission, and CD quantum yields. To exploit the PB dynamics as a powerful tool to investigate CD photophysics, we also carried out dedicated experiments in a partial illumination geometry, allowing us to analyze the recovery of the fluorescence due to diffusion. Based on the experimental results, we conclude that the nature of the CD fluorescence cannot be solely ascribable to small optically active molecules free diffusing in solution, contributing to shed light on one of the most debated issues in the photophysics of CDs.

CsPbBr3 nanocrystals (NCs) passivated by conventional lipophilic capping ligands suffer from colloidal and optical instability under ambient conditions, commonly due to the surface rearrangements induced by the polar solvents used for the NC purification steps. To avoid onerous postsynthetic approaches, ascertained as the only viable stability-improvement strategy, the surface passivation paradigms of as-prepared CsPbBr3 NCs should be revisited. In this work, the addition of an extra halide source (8-bromooctanoic acid) to the typical CsPbBr3 synthesis precursors and surfactants leads to the in situ formation of a zwitterionic ligand already before cesium injection. As a result, CsPbBr3 NCs become insoluble in nonpolar hexane, with which they can be washed and purified, and form stable colloidal solutions in a relatively polar medium (dichloromethane), even when longly exposed to ambient conditions. The improved NC stability stems from the effective bidentate adsorption of the zwitterionic ligand on the perovskite surfaces, as supported by theoretical investigations. Furthermore, the bidentate functionalization of the zwitterionic ligand enables the obtainment of blue-emitting perovskite NCs with high PLQYs by UV-irradiation in dichloromethane, functioning as the photoinduced chlorine source. publishedVersion

A wide variety of photoinduced electronic coherences are shown to be robust with respect to dephasing in ensembles of quasi-homodimers assembled with sub-nm ligands from colloidal 3 nm CdSe quantum dots (QDs) with controlled 9% size dispersion, both in solution and in solid-state. Coherence periods ranging from 40 to 300 fs are consistently characterized by multi-dimensional electronic spectroscopy in the Vis range in solution and solid-state samples. A theoretical model that includes size dispersion, spin orbit coupling, and crystal field splitting supports the assignment of electronic coherences. Further, this model provides a guide for optimizing the coherences by tuning the interplay between dimer electronic delocalization, optical activity and size dispersion. The experimental persistence of many QD electronic coherences at the level of the size dispersed ensemble in the solid-state and in solution opens the way for building versatile bottom-up materials well suited to quantum technology applications.

Plasma Treated Water Solutions (PTWS) recently emerged as a novel tool for the generation of Reactive Oxygen and Nitrogen Species (ROS and RNS) in liquids. The presence of ROS with a strong oxidative power, like hydrogen peroxide (H2O2), has been proposed as the main effector for the cancer-killing properties of PTWS. A protective role has been postulated for RNS, with nitric oxide (NO) being involved in the activation of antioxidant responses and cell survival. However, recent evidences proved that NO-derivatives in proper mixtures with ROS in PTWS could enhance rather than reduce the selectivity of PTWS-induced cancer cell death through the inhibition of specific antioxidant cancer defenses. In this paper we discuss the formation of RNS in different liquids with a Dielectric Barrier Discharge (DBD), to show that NO is absent in PTWS of complex composition like plasma treated (PT)-cell culture media used for in vitro experiments, as well as its supposed protective role. Nitrite anions (NO2-) instead, present in our PTWS, were found to improve the selective death of Saos2 cancer cells compared to EA.hy926 cells by decreasing the cytotoxic threshold of H2O2 to non-toxic values for the endothelial cell line.

Stable cesium lead bromide perovskite nanocrystals (NCs) showing a near-unity photoluminescence quantum yield (PLQY), narrow emission profile, and tunable fluorescence peak in the green region can be considered the ideal class of nanomaterials for optoelectronic applications. However, a general route for ensuring the desired features of the perovskite NCs is still missing. In this paper, we propose a synthetic protocol for obtaining near-unity PLQY perovskite nanocubes, ensuring their size control and, consequently, a narrow and intense emission through the modification of the reaction temperature and the suitable combination ratio of the perovskite constituting elements. The peculiarity of this protocol is represented by the dissolution of the lead precursor (PbBr2) as a consequence of the exclusive complexation with the bromide anions released by the in situ SN2 reaction between oleylamine (the only surfactant introduced in the reaction mixture) and 1-bromohexane. The obtained CsPbBr3 nanocubes exhibit variable size (ranging from 6.7 ± 0.7 nm to 15.2 ± 1.2 nm), PL maxima between 505 and 517 nm, and near-unity PLQY with a narrow emission profile (fwhm of 17–19 nm). Additionally, the NCs synthesized with this approach preserve their high PLQYs even after 90 days of storage under ambient conditions, thus displaying a remarkable optical stability. Through the rationalization of the obtained results, the proposed synthetic protocol provides a new ground for the direct preparation of differently structured perovskite NCs without resorting to any additional post-synthetic treatment for improving their emission efficiency and stability.

The elucidation of the structure–property correlation in 2D metal halide perovskite is a key issue to understand the dependence of optical properties on structural distortions and to design novel tailored materials. To extend the actual knowledge on this kind of correlation for lead-free materials, here we report four novel 2D germanium bromide perovskites, namely A2GeBr4with A = phenylethylammonium, PEA, Br-phenylethylammonium, BrPEA, F-phenylethylammonium, FPEA, and benzylammonium BZA. A dependence of the band gap value and emission characteristics in terms of Stokes shift and peak width has been highlighted and correlated with the octahedral distortion parameters. In addition, by comparing the actual results with previous data on analogous Sn- and Pb-based materials, we observed an intrinsic increased distortion induced by germanium, particularly on the octahedral bond elongation and bond angle variance, and less on the Ge–Br–Ge bond angle. The structural and optical investigation, together with density functional theory simulations, clarified the role of different structural distortion parameters on the optical properties for a series of 2D Ge-containing perovskites, thus providing novel clues for the future design of layered lead-free materials.

Carbon dots (CDs) have been progressively attracting interest as novel environmentally friendly and cost-effective luminescent nanoparticles, for implementation in light-emitting devices, solar cells, photocatalytic devices and biosensors. Here, starting from a cost-effective bottom-up synthetic approach, based on a suitable amphiphilic molecule as carbon precursor, namely cetylpyridinium chloride (CPC), green-emitting CDs have been prepared at room temperature, upon treatment of CPC with concentrated NaOH solutions. The investigated method allows the obtaining, in one-pot, of both water-dispersible (W-CDs) and oil-dispersible green-emitting CDs (O-CDs). The study provides original insights into the chemical reactions involved in the process of the carbonization of CPC, proposing a reliable mechanism for the formation of the O-CDs in an aqueous system. The ability to discriminate the contribution of different species, including molecular fluorophores, allows one to properly single out the O-CDs emission. In addition, a mild heating of the reaction mixture, at 70 &deg, C, has demonstrated the ability to dramatically decrease the very long reaction time (i.e. from tens of hours to days) at room temperature, allowing us to synthesize O-CDs in a few tens of minutes while preserving their morphological and optical properties.

A novel hybrid nanocomposite formed by RGO flakes, surface functionalized by 1-pyrene carboxylic acid (PCA), densely and uniformly in situ decorated by Au NPs, that are concomitantly coordinated by the PCA carboxylic group, and by an aromatic thiol used as the reducing agent in the synthesis, both ensuring, at the same time, a stable non-covalent NPs anchorage to the RGO flakes, and an efficient interparticle electron coupling along the NP network onto the RGO, is reported. The obtained solution processable hybrid material is used to modify Screen-Printed Carbon Electrodes (SPCEs). The hybrid modified SPCEs, functionalized with a thiolated DNA capture probe, are tested in a streptavidin-alkaline-phosphatase catalyzed assay, for the detection of the biotinylated miRNA-221, and for its determination in spiked human blood serum samples. The proposed genosensor demonstrates a high sensitivity (LOD of 0.7 pM), attesting for a performance comparable with the most effective reported sensors. The enhanced sensitivity is explained in terms of the very fast heterogeneous electron transfer kinetics, the concomitant decrease of the electron transfer resistance at the electrode/electrolyte interface, the high electroactivity and the high surface area of the nanostructured hybrid modified SPCEs that provide a convenient platform for nucleic acid biosensing.

The adsorption at cell surfaces and cell internalization of two drug delivery lipid based nanovectors has been investigated by means of Field Emission Scanning Electron Microscopy (FE-SEM) operating at low beam voltage on two different colon carcinoma cell lines, CaCo-2 and CoLo-205, that were compared with the M14 melanoma cell line, as a reference. The cells were incubated with the investigated multifunctional nanovectors, based on liposomes and magnetic micelles loaded with 5-fluorouracil, as a chemotherapeutic agent, and a FE-SEM systematic investigation was performed, enabling a detailed imaging of any morphological changes of the drug exposed cells as a function of time. The results of the FE-SEM investigation were validated by MTS assay and immunofluorescence staining of the Ki-67 protein performed on the investigated cell lines at different times. The two nanoformulations resulted in a comparable effect on CaCo-2 and M14 cell lines, while for CoLo 205 cells, the liposomes provided an cytotoxic activity higher than that observed in the case of the micelles. The study highlighted the high potential of FE-SEM as a valuable complementary technique for imaging and monitoring in time the drug effects on the selected cells exposed to the two different nanoformulations.

The modification of a UV–vis light curable hybrid methacrylic–siloxane resin with organic coated TiO2 nanorods (NRs) has been carried out, in order to fabricate a functional coating for protection of stone artefacts of artistic and cultural relevance. The nanocomposite, formulated without using any harmful and high volatile monomer components, has been deposited onto the surface of stone samples made of a porous carbonate stone, namely Lecce stone. Such a building material, specifically selected as a relevant example of porous and light coloured stone, is widely used in monuments and constructions of cultural and historic interest of the Apulia region (Italy). The protective ability of the nanocomposite against the water vapour capillarity absorption and its self-cleaning properties have been investigated as a function of the TiO2 NR loading, the applied amount of the formulation and the curing conditions. A reliable protocol for the application of the nanocomposite has been implemented, and, remarkably, a single UV–vis light curing step has resulted in a uniform and hydrophobic coating layer, able to preserve the water vapour permeability, the pristine colour and surface morphology of the stone samples. Moreover, the nanocomposite coated stone surface has demonstrated self-cleaning ability when tested for the degradation of an organic molecule, used as a model compound, under both solar light simulated and real sun irradiation. The achieved nanocomposite has ultimately proven to be technologically advantageous as a functional coating, suited to protect surfaces of artistic, archaeological monuments of historical interest, also under outdoor conditions.

The design of large-scale colloidal quantum dots (QDs) assemblies and the investigation of their interaction with their close environment are of great interest for improving QD-based optoelectronic devices' performances. Understanding the interaction mechanisms taking place when only a few QDs are assembled at a short interparticle distance is relevant to better promote the charge or energy transfer processes. Here, small hetero-assemblies formed of a few CdSe QDs of two different sizes, connected by alkyl dithiols, are fabricated in solution. The interparticle distance is tuned by varying the linear alkyl chain length of the bifunctional spacer from nanometer to sub-nanometer range. The crystallographic analysis highlights that the nearest surfaces involved in the linkage between the QDs are the (101) faces. The thorough spectroscopic investigation enables a sound rationalization of the coupling mechanism between the interacting nanoparticles, ranging from charge transfer/wavefunction delocalization to energy transfer, depending on their separation distance., In press in Materials Research Bulletin. Available online 1 October 2021, 111578

Photo-oxidation processes assisted by nanosized semiconductors are receiving increasing attention due to their potential application in environmental field. The ability to exploit the strong potential of photoactive nanomaterials and access their properties relies on the ability to integrate them in photo-reactors and to effectively deposit them on large surfaces. Such a strategy can bridge the gap between the nanoscopic and mesoscopic scale and avoiding nanoparticle release in the environment. In order to integrate nanopartides in functional structures and, finally, devices, their incorporation in suitable host matrices is crucial to achieve processable nanocomposite materials. Here, a comprehensive overview on the preparation of photocatalytic nanocomposite materials and their application for pollutants degradation will be provided. In particular, we will focus on modern synthetic approaches to synthetize UV and visible light active nanocatalysts, on their post-synthesis surface functionalization and on their incorporation in suitable host matrices toward nanocomposite preparation. Finally, some examples from recent literature on their application in environmental remediation and as bactericidal and self-cleaning coatings will be reported. (C) 2016 Elsevier B.V. All rights reserved.

Currently, intensive research efforts focus on the fabrication of meso-structures of assembled colloidal quantum dots (QDs) with original optical and electronic properties. Such collective features originate from the QDs coupling, depending on the number of connected units and their distance. However, the development of general methodologies to assemble colloidal QD with precise stoichiometry and particle-particle spacing remains a key challenge. Here, we demonstrate that dimers of CdSe QDs, stable in solution, can be obtained by engineering QD surface chemistry, reducing the surface steric hindrance and favoring the link between two QDs. The connection is made by using alkyl dithiols as bifunctional linkers and different chain lengths are used to tune the interparticle distance from few nm down to 0.5 nm. The spectroscopic investigation highlights that coupling phenomena between the QDs in dimers are strongly dependent on the interparticle distance and QD size, ultimately affecting the exciton dissociation efficiency.

Efficient FRET systems are developed combining colloidal CdSe quantum dots (QDs) donors and BODIPY acceptors. To promote effective energy transfer in FRET architectures, the distance between the organic fluorophore and the QDs needs to be optimized by a careful system engineering. In this context, BODIPY dyes bearing amino-terminated functionalities are used in virtue of the high affinity of amine groups in coordinating the QD surface. A preliminary QD surface treatment with a short amine ligand is performed to favor the interaction with the organic fluorophores in solution. The successful coordination of the dye to the QD surface, accomplishing a short donor-acceptor distance, provides effective energy transfer already in solution, with efficiency of 76 %. The efficiency further increases in the solid state where the QDs and the dye are deposited as single coordinated units from solution, with a distance between the fluorophores down to 2.2 nm, demonstrating the effectiveness of the coupling strategy.

The quantum properties of nanosystems present a new opportunity to enhance the power of classical computers, both for the parallelism of the computation and the speed of the optical operations. In this paper we present the COPAC project aiming at development of a ground-breaking nonlinear coherent spectroscopy combining optical addressing and spatially macroscopically resolved optical readout. The discrete structure of transitions between quantum levels provides a basis for implementation of logic functions even at room temperature. Exploiting the superposition of quantum states gives rise to the possibility of parallel computation by encoding different input values into transition frequencies. As an example of parallel single instruction multiple data calculation by a device developed during the COPAC project, we present a n-bit adder, showing that due to the properties of the system, the delay of this fundamental circuit can be reduced.

The low photostability of conventional organic dyes and the toxicity of cadmium-based luminescent quantum dots have prompted the development of novel probes for in vitro and in vivo labelling. Here, a new fluorescent lanthanide probe based on silica nanoparticles is fabricated and investigated for optically traceable in vitro translocator protein (TSPO) targeting. The targeting and detection of TSPO receptor, overexpressed in several pathological states, including neurodegenerative diseases and cancers, may provide valuable information for the early diagnosis and therapy of human disorders. Green fluorescent terbium(III)-calix[4]arene derivative complexes are encapsulated within silica nanoparticles and surface functionalized amine groups are conjugated with selective TSPO ligands based on a 2-phenylimidazo[1,2-a]pyridine acetamide structure containing derivatizable carboxylic groups. The photophysical properties of the terbium complex, promising for biological labelling, are demonstrated to be successfully conveyed to the realized nanoarchitectures. In addition, the high degree of biocompatibility, assessed by cell viability assay and the selectivity towards TSPO mitochondrial membrane receptors, proven by subcellular fractional studies, highlight targeting potential of this nanostructure for in vitro labelling of mitochondria.

We report on the preparation of luminescent collectors based on poly(methyl methacrylate) (PMMA) thin films doped with a red-emitting 2-amino-7-acceptor-9-silafluorene, where the amino group is -N(CH3)(2) and the acceptor is -CH=C(CN)(2). The results obtained from photophysical investigations of the dye in different solvents and in PMMA are very encouraging as the silafluorene dyes turn out to be highly dispersed in the solid matrix, stable upon irradiation and highly emissive. QY and lifetime investigations demonstrate that autoabsorption phenomena moderately occur with SilaFluo content, and the optical features still maintained very significant, also at the highest fluorophore concentration (QY similar to 65%). Study of the LSCs features yields excellent optical efficiencies of 9.6% attained for 25 mm thick PMMA films containing the 1.5 wt% of SilaFluo. This performance is at the top level with respect to the current state-of-art of similar devices based on perylene-based fluorophores such as Lumogen Red.

In this work the performance improvement of hybrid solar cells (HSCs), constituted by polycyclopentadithiophene-benzothiadiazole (PCPDTBT) and CdSe nanocrystals (NCs), achieved thanks to the use as additive of an on-purpose designed rod-coil block copolymer (BCP), is evaluated. The rod-coil BCP, namely polycyclopentadithiophene-benzothiadiazole-b/ock-poly(4-vinylpyridine) (PCPDTBT-b-P4VP), is synthesized with a chain growth-like procedure starting from a PCPDTBT macroinitiator suitably tailored in order to achieve molecular similarity with the commercial PCPDTBT homopolymer here used in the HSCs, in order to optimize the interactions between the two materials in the device. Nitroxide-mediated radical polymerization (NMRP) of 4-vinylpyridine generates the rod-coil flexible chain which is maintained short to limit the insertion of insulating moieties in the additive structure. The employment of the rod-coil BCP as additive is demonstrated to be an effective alternative to the standard post-deposition thermal treatment. The device with 1% of additive performs better than the thermal annealed one and shows an improvement of 60% in power conversion efficiency (PCE) if compared to the pristine CdSe NCs/PCPDTBT cell. The optical and morphological analysis of the CdSe NCs/PCPDTBT films with and without additive elucidates the relation between the device performance and the active layer microstructure and clearly highlights how the improvement of the miscibility between the polymer and the inorganic NC species can be associated to the increased efficiency in HSCs. A future development of this room-temperature processing approach of the active layer, not requiring any additional post-fabrication annealing steps, could implement HSCs fabrication by common printing technologies for a cost-effective fabrication of devices onto large-area and flexible substrates. (C) 2016 Elsevier Ltd. All rights reserved.

We report the synthesis of mesoporous TiO2 nanostructures based on the decomposition of TiOSO4 in aqueous alkaline solution at room temperature, followed by mild thermal treatment (110 °C) in an oven and suitable to yield up to 40 g of product per batch. The duration of the thermal treatment was found to be crucial to control crystalline phase composition, specific surface area, surface chemistry and, accordingly, the photocatalytic properties of the obtained TiO2 nanocrystals. The thorough investigation of the prepared samples allowed us to explain the relationship between the structure of the obtained nanoparticles and their photocatalytic behavior, that was tested in a model reaction. In addition, the advantage of the mild treatment against a harsher calcination at 450 °C was illustrated. The proposed approach represents a facile and sustainable route to promptly access an effective photocatalyst, thus holding a significant promise for the development of solutions suitable to real technological application in environmental depollution.

The rapid growth in demand for data and the emerging applications of Big Data require the increase of memory capacity. Magnetic memory devices are among the leading technologies for meeting this demand; however, they rely on the use of ferromagnets that creates size reduction limitations and poses complex materials requirements. Usually magnetic memory sizes are limited to 30-50 nm. Reducing the size even further, to the ≈10-20 nm scale, destabilizes the magnetization and its magnetic orientation becomes susceptible to thermal fluctuations and stray magnetic fields. In the present work, it is shown that 10 nm single domain ferromagnetism can be achieved. Using asymmetric adsorption of chiral molecules, superparamagnetic iron oxide nanoparticles become ferromagnetic with an average coercive field of ≈80 Oe. The asymmetric adsorption of molecules stabilizes the magnetization direction at room temperature and the orientation is found to depend on the handedness of the chiral molecules. These studies point to a novel method for the miniaturization of ferromagnets (down to ≈10 nm) using established synthetic protocols.

We report a very effective synthetic approach to achieve the in situ growth, directly at the surface of single walled carbon nanotubes, of shape controlled anatase TiO 2 nanocrystals, either as nanorods or nanospheres, by simply tuning the ratio between reactants. Remarkably, the obtained SWCNTs/TiO 2 heterostructures result dispersible in organic solvents, leading to optically clear dispersions. The photocatalytic activity of the SWCNTs/TiO 2 heterostructures, compared with bare TiO 2 nanorods or nanospheres demonstrates a significant enhancement. In particular, SWCNTs/TiO 2 heterostructures demonstrates an enhancement of reaction rate up to 3 times with respect to the commercially available standard TiO 2 powder (TiO 2 P25) under UV light and up to 2 times under visible light.

2D electronic spectroscopy maps acquired in different configurations unveil intraband hot carrier cooling and interband multi-exciton recombination dynamics., Although the harnessing of multiple and hot excitons is a prerequisite for many of the groundbreaking applications of semiconductor quantum dots (QDs), the characterization of their dynamics through conventional spectroscopic techniques is cumbersome. Here, we show how a careful analysis of 2DES maps acquired in different configurations (BOXCARS and pump–probe geometry) allows the tracking and visualization of intraband Auger relaxation mechanisms, driving the hot carrier cooling, and interband bi- and tri-exciton recombination dynamics. The results obtained on archetypal core–shell CdSe/ZnS QDs suggest that, given the global analysis of the resulting datasets, 2D electronic spectroscopy techniques can successfully and efficiently dispel the intertwined dynamics of fast and ultrafast recombination processes in nanomaterials. Hence, we propose this analysis scheme to be used in future research on novel quantum confined systems.

Organic capped Au nanoparticles (NPs) and PbS quantum dots (QDs), synthesized with high control on size and size distribution, were used as building blocks for fabricating solid crystals by solvent evaporation. The superlattice formation process for the two types of nano-objects was investigated as a function of concentration by means of electron microscopy and X-ray techniques. The effect of building block composition, size, geometry, and concentration and the role of the organic coordinating molecules was related to the degree of order in the superlattices. A convenient combination of different complementary X-ray techniques, namely in situ and ex situ GISAXS and GIWAXS, allowed elucidating the most reliable signatures of the superlattices at various stages of the self-assembly process, since their early stage of formation and up to few months of aging. Significantly different assembly behaviour was assessed for the two types of NPs, clearly explained on the basis of their chemical composition, ultimately reflecting on the assembling process and on the final structure characteristics.

The unique size- and shape-dependent electronic properties of nanocrystals (NCs) make them extremely attractive as novel structural building blocks for constructing a new generation of innovative materials and solid-state devices. Recent advances in material chemistry has allowed the synthesis of colloidal NCs with a wide range of compositions, with a precise control on size, shape and uniformity as well as specific surface chemistry. By incorporating such nanostructures in polymers, mesoscopic materials can be achieved and their properties engineered by choosing NCs differing in size and/or composition, properly tuning the interaction between NCs and surrounding environment. In this contribution, different approaches will be presented as effective opportunities for conveying colloidal NC properties to nanocomposite materials for micro and nanofabrication. Patterning of such nanocomposites either by conventional lithographic techniques and emerging patterning tools, such as ink jet printing and nanoimprint lithography, will be illustrated, pointing out their technological impact on developing new optoelectronic and sensing devices.

In this work semiconductor nanocrystals (NCs) were assembled by means of a layer-by-layer procedure, by properly combining RF (13.56 MHz) glow discharge-assisted processes with wet chemistry approaches. Colloidal core shell type NCs formed by CdSe coated with an epitaxial layer of ZnS (CdSe@ZnS) were then assembled, from aqueous solution, onto the plasma modified materials. The obtained results show that spatially resolved NC assembling can be successfully achieved on micro-structured domains obtained by means of plasma assisted processes. Layers of functionalized NCs are thus demonstrated to be materials that can be effectively integrated into devices for application in photovoltaics, electronic nano-devices and biological sensors.

The organic vapor absorption capacity of poly(methyl metacrylate) (PMMA), filled with oleic acid (OLEA) capped TiO 2 nanocrystals (NCs) with curved shape, rod-like and spherical, is studied. The NC shape combined with the nature of the capping molecules can be used to enhance or reduce the PMMA ability to absorb different solvent molecules in a controlled way. Indeed, the arrangement of the ligands at the NC surface demonstrates an effective tool to control the extent of the interaction between the penetrating molecules and the embedded NCs from the outer to the inner specific chemical functionality of the coordinating ligand molecules.

Binary asymmetric nanocrystals (BNCs), composed of a photoactive TiO2 nanorod joined with a superparamagnetic γ-Fe2O3 spherical domain, were embedded in polyethylene glycol modified phospholipid micelle and successfully bioconjugated to a suitably designed peptide containing an RGD motif. BNCs represent a relevant multifunctional nanomaterial, owing to the coexistence of two distinct domains in one particle, characterized by high photoactivity and magnetic properties, that is particularly suited for use as a phototherapy and hyperthermia agent as well as a magnetic probe in biological imaging. We selected the RGD motif in order to target integrin expressed on activated endothelial cells and several types of cancer cells. The prepared RGD-peptide/BNC conjugates, comprehensively monitored by using complementary optical and structural techniques, demonstrated a high stability and uniform dispersibility in biological media. The cytotoxicity of the RGD-peptide/BNC conjugates was studied in vitro. The cellular uptake of RGD-peptide conjugates in the cells, assessed by means of two distinct approaches, namely confocal microscopy analysis and emission spectroscopy determination in cell lysates, displayed selectivity of the RGD-peptide-BNC conjugate for the αvβ3 integrin. These RGD-peptide-BNC conjugates have a high potential for theranostic treatment of cancer.

TiO 2 nanorods (NRs) and γ-Fe 2 O 3 nanocrystals (NCs) passivated with unsaturated long-chain carboxylic acids, namely 10-undecylenic acid (10UDA) and oleic acid (OLEA), are covalently anchored to Si(100) at room temperature by UV-light-driven reaction of hydrogenated silicon with the carbon-carbon double bond (-C=C-) moieties of the capping surfactants. The high reactivity of vinyl groups towards Si provides a general tool for attaching particles of both materials via Si-C bonds. Interestingly, TiO 2 NRs were efficiently attached to silicon even when capped by OLEA. This latter finding has been explained by a photocatalytic mechanism involving the primary role of hydroxyl radicals that can be generated upon bandgap TiO 2 photoexcitation with UV light. The increased oxide coverage achievable on Si opens access to further surface manipulation, as demonstrated by the possibility of depositing an additional film of Au nanoparticles onto TiO 2 via TiO 2 -catalyzed visible-light-driven reduction of aqueous AuCl 4 - ions. Extensive morphological and chemical characterization of the obtained NC-functionalized Si substrates is provided to support the effectiveness of proposed photochemical approaches.

Shape- and phase-controlled ZnSe nanocrystals are synthesized in hot mixtures of long-chain alkylamines and alkylphosphines. The variation in the rate of precursor addition, down to low and controlled levels, allows the nucleation, as well as the growth of the nanocrystals, to switch between the wurtzite and the zinc blend structures. Such a level of control leads to a variety of shapes, from spheres to rods to three-dimensional structures formed by rod sections interconnected through branching points. The temperature- and time-dependence of the chemical potentials for the monomer species in solution are the most relevant parameters involved in the growth mechanism.

An extensive optical and photoelectrochemical study of blended systems composed of organic-capped TiO(2) nanocrystals with either a spherical or rodlike morphology and a conjugated polymer, MEH-PPV, is presented. The absorption and emission properties of the heterojunctions have been characterized both in solution and in thin films. The blended structures deposited onto conductive substrates have been employed as active layers in photoelectrochemical systems. The investigation has been focused on the photoinduced charge transfer and recombination processes at the interface between the two components, as a function of the nanocrystal shape and surface coating, and of the film thickness. The presence of a large number of interfaces available for charge transfer is believed to play a fundamental role in enhancing the photoelectrochemical performances of the dispersed heterojunctions. The reported results suggest that such MEH-PPV/TiO(2) heterojunctions may be exploited as potential active layers in future photovoltaic and photoelectrochemical devices.