Search

In this study, we used an experimental design to investigate the influence of the total draft, break draft, distance between the aprons (Clips) and production roller pressure on yarn quality in order to obtain optimum drafting conditions for polyester and viscose (PES/CV) blend yarns in ring spinning frame. We used PES fibers (1.4 dtex × 38 mm long) and CV fibers (1.6 dtex × 38 mm long) to spin a 20 Tex blend yarn of PES (70%)/CV (30%) blend ratio. When the break draft, adjustment of distance between of aprons and roller pressure is not reasonable, controlling and leading of the fibers is not sufficient for proper orientation of the fibers in the yarn structure to produce a high quality yarn. Experimental results and statistical analysis show that the best yarn quality will be obtained under drafting conditions total draft of 38, 1.2 break draft, 2.8 mm distance between of aprons and maximum pressure of the production top roller (18daN).

Copyright of Fibres & Textiles in Eastern Europe is the property of Sciendo and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

The light profile method using image processing is a suitable technique for the assessment and analysis of fabric wrinkle. In this method the colour and fabric pattern have no effects on the results. The heights of the light profiles created by fabric wrinkles are considered as the most important factor in this study. The standard deviation, mean deviations and mean heights of the light profile on the fabric surface are other factors used in this work. The results indicated that mean deviations is the most accurate method of assessing fabric wrinkle. At the same time the results showed good agreement with the assessments of experts in the field. [ABSTRACT FROM AUTHOR]

This paper reports an analytical study of the contact pressure between an elastic garment and some parts of the human body whose geometries are cylindrical and conical, which is based on contact mechanics. The results of this model are compared with a numerical simulation using the finite element method as well as an experimental approach. This model is based on an analysis of contact areas between body and the garment. The numerical solution is done using ANSYS-9 software. The results showed good agreement between the analytical and software analysis. As a result, validation of the software is guaranteed for analysis of other areas of the body using this software. The results show a maximum error of about 7 percent between the theoretical and software solutions. An experimental case study shows there is always good agreement in the presence of friction which, was not included in the analytical and software solutions. [ABSTRACT FROM AUTHOR]