Search

et al., We present results of the Relic Axion Dark-Matter Exploratory Setup (RADES), a detector which is part of the CERN Axion Solar Telescope (CAST), searching for axion dark matter in the 34.67 μeV mass range. A radio frequency cavity consisting of 5 sub-cavities coupled by inductive irises took physics data inside the CAST dipole magnet for the first time using this filter-like haloscope geometry. An exclusion limit with a 95% credibility level on the axion-photon coupling constant of gaγ ≳ 4 × 10−13 GeV−1 over a mass range of 34.6738 μeV < ma < 34.6771 μeV is set. This constitutes a significant improvement over the current strongest limit set by CAST at this mass and is at the same time one of the most sensitive direct searches for an axion dark matter candidate above the mass of 25 μeV. The results also demonstrate the feasibility of exploring a wider mass range around the value probed by CAST-RADES in this work using similar coherent resonant cavities., Article funded by SCOAP3., This work has been funded by the Spanish Agencia Estatal de Investigacion (AEI) and Fondo Europeo de Desarrollo Regional (FEDER) under project FPA-2016-76978-C3-2-P (supported by the grant FPI BES-2017-079787) and PID2019-108122GB-C33, and was supported by the CERN Doctoral Studentship programme. The research leading to these results has received funding from the European Research Council and BD, JG and SAC acknowledge support through the European Research Council under grant ERC-2018-StG-802836 (AxScale project). BD also acknowledges fruitful discussions at MIAPP supported by DFG under EXC-2094 – 390783311. IGI acknowledges also support from the European Research Council (ERC) under grant ERC-2017-AdG-788781 (IAXO+ project). JR has been supported by the Ramon y Cajal Fellowship 2012-10597, the grant PGC2018-095328-BI00(FEDER/Agencia estatal de investigación) and FSE-DGA2017-2019-E12/7R (Gobierno de Aragón/FEDER) (MINECO/FEDER), the EU through the ITN “Elusives” H2020-MSCA-ITN-2015/674896 and the Deutsche Forschungsgemeinschaft under grant SFB-1258 as a Mercator Fellow. CPG was supported by PROMETEO II/2014/050 of Generalitat Valenciana, FPA2014-57816-P of MINECO and by the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreements 690575 and 674896. AM is supported by the European Research Council under Grant No. 742104.

Axions are a natural consequence of the Peccei-Quinn mechanism, the most compelling solution to the strong-CP problem. Similar axion-like particles (ALPs) also appear in a number of possible extensions of the Standard Model, notably in string theories. Both axions and ALPs are very well motivated candidates for Dark Matter, and in addition, they would be copiously produced at the sun's core. A relevant effort during the last decade has been the CAST experiment at CERN, the most sensitive axion helioscope to-date. The International Axion Observatory (IAXO) is a large-scale 4th generation helioscope. As its primary physics goal, IAXO will look for solar axions or ALPs with a signal to background ratio of about 5 orders of magnitude higher than CAST. Recently the IAXO collaboration has proposed and intermediate experimental stage, BabyIAXO, conceived to test all IAXO subsystems (magnet, optics, detectors and sun-tracking systems) at a relevant scale for the final system and thus serve as pathfinder for IAXO but at the same time as a fully-fledged helioscope with record and relevant physics reach in itself with potential for discovery. BabyIAXO was endorsed by the Physics Review committee of DESY last May 2019. Here we will review the status and prospects of BabyIAXO and its potential to probe the most physics motivated regions of the axion & ALPs parameter space., 6 pages, ICHEP 2020 Virtual conference

Çetin, Serkant Ali (Dogus Author) -- Arık, Metin (Dogus Author) -- Yıldız, Süleyman Cenk (Dogus Author) Although they have not yet been detected, axions and axion-like particles (ALPs) continue to maintain the interest (even increasingly so) of the rare-event searches community as viable candidates for the Dark Matter of the Universe but also as a solution for several other puzzles of astrophysics. Their property of coupling to photons has inspired different experimental methods for their detection, one of which is the helioscope technique. The CERN Axion Solar Telescope (CAST) is the most sensitive helioscope built up to date and has recently published part of the latest data taken with the magnet bores gradually filled with He-3, probing the mass range up to 1.17 eV. The International AXion Observatory (IAXO) is being proposed as a facility where different axion studies can be performed, with the primary goal to study axions coming from the Sun. Designed to maximize sensitivity, it will improve the levels reached by CAST by almost 5 orders of magnitude in signal detection, that is more than one order of magnitude in terms of gay. Here we will summarize the most important aspects of the helioscopes, and focus mainly on IAXO, based on the recent papers [1, 2].

International audience; More than 80 years after the postulation of dark matter, its nature remains one of the fundamental questions in cosmology. Axions are currently one of the leading candidates for the hypothetical, non-baryonic dark matter that is expected to account for about 25% of the energy density of the Universe. Especially in the light of the Large Hadron Collider at CERN slowly closing in on Weakly-Interacting Massive Particle (WIMP) searches, axions and axion-like particles (ALPs) provide a viable alternative approach to solving the dark matter problem. The fact that makes them particularly appealing is that they were initially introduced to solve a long-standing problem in quantum chromodynamics and the Standard Model of particle physics.Helioscopes are a type of axion experiment searching for axions produced in the core of the Sun via the Primakoff effect. The International Axion Observatory (IAXO) is a next generation axion helioscope aiming at a sensitivity to the axion-photon coupling of 1 − 1.5 orders of magnitude beyond the current most sensitive axion helioscope, which is the CERN Axion Solar Telescope (CAST). IAXO will be able to challenge the stringent bounds from supernova SN1987A and test the axion interpretation of anomalous white-dwarf cooling. Beyond standard axions, this new experiment will also be able to search for a large variety of axion-like particles and other novel excitations at the low-energy frontier of elementary particle physics. BabyIAXO is proposed as an intermediate-scale experiment increasing the sensitivity to axion-photon couplings down to a few 10$^{−11}$ GeV$^{−1}$ and thus delivering significant physics results while demonstrating the feasibility of the full-scale IAXO experiment. Here we introduce the IAXO and BabyIAXO experiments, report on the current status of both and outline the expected IAXO science reach.

Direct measurement of plutonium and uranium X-rays and gamma-rays is a highly desirable non-destructive analysis method for the use in reprocessing fuel environments. The high background and intense radiation from spent fuel make direct measurements difficult to implement since the relatively low activity of uranium and plutonium is masked by the high activity from fission products. To overcome this problem, we make use of a grazing incidence optic to selectively reflect K α and K β fluorescence of Special Nuclear Materials (SNM) into a high-purity position-sensitive germanium detector and obtain their relative ratios.

We have developed a process for indirectly coating arbitrarily small diameter electroformed nickel replicated optics with multilayers to increase their response at high energy (i.e. >10 keV). The ability to fabricate small diameter multilayer coated full shell Wolter X-ray optics with narrow bandpass opens the door to several applications within astronomy and also provides a path for cross-fertilization to other fields. We report on the characterization and evaluation of the first two prototype X-ray Wolter optics to be delivered to the Z Pulsed Power Facility at Sandia National Laboratories. The intent is to develop and field several optics as part of an imaging system with targeted spectral ranges.

Asymmetry is required by most numerical simulations of stellar core-collapse explosions, but the form it takes differs significantly among models. The spatial distribution of radioactive 44Ti, synthesized in an exploding star near the boundary between material falling back onto the collapsing core and that ejected into the surrounding medium, directly probes the explosion asymmetries. CassiopeiaA is a young, nearby, core-collapse remnant from which 44Ti emission has previously been detected but not imaged. Asymmetries in the explosion have been indirectly inferred from a high ratio of observed 44Ti emission to estimated 56Ni emission, from optical light echoes, and from jet-like features seen in the X-ray and optical ejecta. Here we report spatial maps and spectral properties of the 44Ti in Cassiopeia A. This may explain the unexpected lack of correlation between the 44Ti and iron X-ray emission, the latter being visible only in shock-heated material. The observed spatial distribution rules out symmetric explosions even with a high level of convective mixing, as well as highly asymmetric bipolar explosions resulting from a fast-rotating progenitor. Instead, these observations provide strong evidence for the development of low-mode convective instabilities in core-collapse supernovae., Comment: 32 pages, Figures Embedded

We present the 3-8 keV and 8-24 keV number counts of active galactic nuclei (AGN) identified in the NuSTAR extragalactic surveys. NuSTAR has now resolved 33-39% of the X-ray background in the 8-24 keV band, directly identifying AGN with obscuring columns up to approximately 1e25 /cm2. In the softer 3-8 keV band the number counts are in general agreement with those measured by XMM-Newton and Chandra over the flux range 5e-15 < S(3 - 8 keV)/(erg/cm2/s) < 1e-12 probed by NuSTAR. In the hard 8-24 keV band NuSTAR probes fluxes over the range 2e-14 < S(8-24 keV)/(erg/cm2/s) < 1e-12, a factor of approximately 100 fainter than previous measurements. The 8-24 keV number counts match predictions from AGN population synthesis models, directly confirming the existence of a population of obscured and/or hard X-ray sources inferred from the shape of the integrated cosmic X-ray background. The measured NuSTAR counts lie significantly above simple extrapolation with a Euclidian slope to low flux of the Swift/BAT 15-55 keV number counts measured at higher fluxes S(15-55 keV) > 1e-11 erg/cm2/s, reflecting the evolution of the AGN population between the Swift/BAT local (z, 8 pages; accepted by the Astrophysical Journal

The use of a grazing incidence optic to selectively reflect K-shell fluorescence emission and isotope-specific lines from special nuclear materials is a highly desirable nondestructive analysis method for use in reprocessing fuel environments. Preliminary measurements have been performed, and a simulation suite has been developed to give insight into the design of the x ray optics system as a function of the source emission, multilayer coating characteristics, and general experimental configurations. The experimental results are compared to the predictions from our simulation toolkit to illustrate the ray-tracing capability and explore the effect of modified optics in future measurement campaigns.

We present a phase-coherent timing solution for PSR J1640-4631, a young 206 ms pulsar using X-ray timing observations taken with NuSTAR. Over this timing campaign, we have measured the braking index of PSR J1640-4631 to be n = 3.15+/-0.03. Using a series of simulations, we argue that this unusually high braking index is not due to timing noise, but is intrinsic to the pulsar's spin-down. We cannot, however, rule out contamination due to an unseen glitch recovery, although the recovery timescale would have to be longer than most yet observed. If this braking index is eventually proven to be stable, it demonstrates that pulsar braking indices greater than 3 are allowed in nature, hence other physical mechanisms such as mass or magnetic quadrupoles are important in pulsar spin-down. We also present a 3-sigma upper limit on the pulsed flux at 1.4 GHz of 0.018 mJy., Comment: 4 pages, 2 figures. Accepted at ApJL

NASA's NuSTAR observatory is the first focusing hard X-ray telescope. Launched in June 2012, NuSTAR is sensitive in the 3–79 keV range with unprecedented ~17″ FWHM angular resolution above 12 keV, a result of its multilayer-coated optics and 10-m focal length. With its large effective area (900 cm2 at 10 keV), NuSTAR has point-source sensitivity ~100 times better than previous hard X-ray telescopes. Here we describe NuSTAR and its planned work on rotation-powered pulsars and magnetars during its nominal 2-yr baseline mission that has just commenced.

The LCLS hard X-ray Free Electron Laser at SLAC reported first lasing in April 2009. Since then two successful user runs have been completed at the two soft X-ray stations. The first hard X-ray station has started commissioning in July 2010. Beam diagnostics play an essential role for tuning the machine and delivering the requested beam properties to the users. An overview of the LCLS photon diagnostics will be presented including some selected commissioning results. Plans for future improvements and upgrades will be briefly discussed.

A new Wolter x-ray imager has been developed for the Z machine to study the emission of warm (>15 keV) x-ray sources. A Wolter optic has been adapted from observational astronomy and medical imaging, which uses curved x-ray mirrors to form a 2D image of a source with 5 × 5 × 5 mm3 field-of-view and measured 60-300-μm resolution on-axis. The mirrors consist of a multilayer that create a narrow bandpass around the Mo Kα lines at 17.5 keV. We provide an overview of the instrument design and measured imaging performance. In addition, we present the first data from the instrument of a Mo wire array z-pinch on the Z machine, demonstrating improvements in spatial resolution and a 350-4100× increase in the signal over previous pinhole imaging techniques.

The need for a time-resolved monochromatic x-ray imaging diagnostic at photon energies >15 keV has motivated the development of a Wolter optic to study x-ray sources on the Z-machine at Sandia National Laboratories. The work is performed in both the LLNL’s x-ray calibration facility and SNL’s micro-focus x-ray lab. Characterizations and calibrations include alignment, measurement of throughput within the field of view (FOV), the point-spread function within the FOV both in and out of focus, and bandpass in the FOV. These results are compared with ray tracing models, showing reasonable agreement.

Recent breakthroughs in the fabrication of small-radii Wolter optics for astrophysics allow high energy density facilities to consider such optics as novel x-ray diagnostics at photon energies of 15-50 keV. Recently, the Lawrence Livermore National Laboratory, Sandia National Laboratories (SNL), the Smithsonian Astrophysical Observatory, and the NASA Marshall Space Flight Center jointly developed and fabricated the first custom Wolter microscope for implementation in SNL’s Z machine with optimized sensitivity at 17.5 keV. To achieve spatial resolution of order 100-200 microns over a field of view of 5 × 5 × 5 mm3 with high throughput and narrow energy bandpass, the geometry of the optic and its multilayer required careful design and optimization. While the geometry mainly influences resolution and the field of view of the diagnostic, the mirror coating determines the spectral response and throughput. Here we outline the details of the design and fabrication process for the first multilayer-coated Wolter I optic for SNL’s Z machine (Z Wolter), including its W/Si multilayer, and present results of raytrace simulations completed to predict and verify the performance of the optic.

Research performed under this LDRD aimed to demonstrate the ability to detect and measure hard X-ray emissions using multilayer X-ray reflective optics above 400 keV, to enable the development of inexpensive and high-accuracy mirror substrates, and to investigate applications of hard X-ray mirrors of interest to the nuclear security community. Experiments conducted at the European Synchrotron Radiation Facility demonstrated hard X-ray mirror reflectivity up to 650 keV for the first time. Hard X-ray optics substrates must have surface roughness under 3 to 4 Angstrom rms, and three materials were evaluated as potential substrates: polycarbonates, thin Schott glass and a new type of flexible glass called Willow Glass®. Chemical smoothing and thermal heating of the surface of polycarbonate samples, which are inexpensive but have poor intrinsic surface characteristics, did not yield acceptable surface roughness. D263 Schott glass was used for the focusing optics of the NASA NuSTAR telescope. The required specialized hardware and process were costly and motivated experiments with a modified non-contact slumping technique. The surface roughness of the glass was preserved and the process yielded cylindrical shells with good net shape pointing to the potential advantage of this technique. Finally, measured surface roughness of 200 and 130 μm thickmore » Willow Glass sheets was between 2 and 2.5 A rms. Additional results of flexibility tests and multilayer deposition campaigns indicated it is a promising substrate for hard X-ray optics. The detection of U and Pu characteristics X-ray lines and gamma emission lines in a high background environment was identified as an area for which X-ray mirrors could have an impact and where focusing optics could help reduce signal to noise ratio by focusing signal onto a smaller detector. Hence the first one twelvetant of a Wolter I focusing optics for the 90 to 140 keV energy range based on aperiodic multilayer coating was designed. Finally, we conducted the first demonstration that reflective multilayer mirrors could be used as diagnostic for HED experiment with an order of magnitude improvement in signal-to-noise ratio for the multilayer optic compared a transmission crystal spectrometer.« less

We report the first hard X-ray observations with NuSTAR of the BL Lac type blazar PKS 2155-304, augmented with soft X-ray data from XMM-Newton and gamma-ray data from the Fermi Large Area Telescope, obtained in April 2013 when the source was in a very low flux state. A joint NuSTAR and XMM spectrum, covering the energy range 0.5 - 60 keV, is best described by a model consisting of a log-parabola component with curvature beta = 0.3(+0.2,-0.1) and a (local) photon index 3.04 +/- 0.15 at photon energy of 2 keV, and a hard power-law tail with photon index 2.2 +/- 0.4. The hard X-ray tail can be smoothly joined to the quasi-simultaneous gamma-ray spectrum by a synchrotron self-Compton component produced by an electron distribution with index p = 2.2. Assuming that the power-law electron distribution extends down to the minimum electron Lorentz factor gamma_min = 1 and that there is one proton per electron, an unrealistically high total jet power L_p of roughly 10^47 erg/s is inferred. This can be reduced by two orders of magnitude either by considering a significant presence of electron-positron pairs with lepton-to-proton ratio of at least 30, or by introducing an additional, low-energy break in the electron energy distribution at the electron Lorentz factor gamma_br1 of roughly 100. In either case, the jet composition is expected to be strongly matter-dominated., Astrophysical Journal, in press

We report on the design, construction and operation of a low background x-ray detection line composed of a shielded Micromegas (micromesh gaseous structure) detector of the microbulk technique. The detector is made from radiopure materials and is placed at the focal point of a $\sim$~5 cm diameter, 1.3 m focal-length, cone-approximation Wolter I x-ray telescope (XRT) comprised of thermally-formed (or "slumped") glass substrates deposited with multilayer coatings. The system has been conceived as a technological pathfinder for the future International Axion Observatory (IAXO), as it combines two of the techniques (optic and detector) proposed in the conceptual design of the project. It is innovative for two reasons: it is the first time an x-ray optic has been designed and fabricated specifically for axion research, and the first time a Micromegas detector has been operated with an x-ray optic. The line has been installed at one end of the CERN Axion Solar Telescope (CAST) magnet and is currently looking for solar axions. The combination of the XRT and Micromegas detector provides the best signal-to-noise ratio obtained so far by any detection system of the CAST experiment with a background rate of 5.4$\times$10$^{-3}\;$counts per hour in the energy region-of-interest and signal spot area., Comment: 21 pages, 16 figures

This paper discusses the development of (i) corrosion-resistant multilayers for the 25–80 nm region (ii) multilayer mirrors for the first 0.5-NA Micro-Exposure Tools at 13.5 nm and (iii) multilayer mirrors for the soft gamma-ray range.

Arık, Metin (Dogus Author) -- The conference paper was firstly submitted to 12th International Conference on Topics in Astroparticle and Underground Physics. The CERN Axion Solar Telescope (CAST) is currently the most sensitive axion helioscope designed to search for axions produced by the Primakoff process in the solar core. CAST is using a Large Hadron Collider (LHC) test magnet where axions could be converted into X-rays with energies up to 10 keV. During the phase I, the experiment operated with vacuum inside the magnet bores and covered axion masses up to 0.02 eV. In the phase II, the magnet bores were filled with a buffer gas (first 4He and later 3He) at various densities in order to extend the sensitivity to higher axion masses (up to f .18 eV). The phase II data taking was completed in 2011. So far, no evidence of axion signal has been found and CAST set the most restrictive experimental limit on the axion-photon coupling constant over a broad range of axion masses. The latest CAST results with 3He data in the mass range 0.39 eV < m a < 0.64 eV will be presented.

Çetin, Serkant Ali (Dogus Author) -- Ezer, C. (Dogus Author) -- Yıldız, Süleyman Cenk (Dogus Author) The CERN Axion Solar Telescope (CAST) experiment searches for axions from the Sun converted into few keV photons via the inverse Primakoff effect in the high magnetic field of a superconducting Large Hadron Collider (LHC) decommissioned test magnet. After results obtained with vacuum in the magnet pipes (phase I of the experiment) as well as with 4He the collaboration is now immersed in the data taking with 3He, to be finished in 2011. The status of the experiment will be presented, including a preliminary exclusion plot of the first 3He data. CAST is currently sensitive to realistic QCD axion models at the sub-eV scale, and with axion-photon couplings down to the ∼ 2 × 10-10 GeV -1, compatible with solar life limits. Future plans include revisiting vaccuum and 4He configurations with improved sensitivity, as well as possible additional search for non-standard signals from chamaleons, paraphotons or other WISPs. For the longer term, we study the feasibility of an altogether improved version of the axion helioscope concept, with a jump in sensitivity of about one order of magnitude in gaγ beyond CAST.

Çetin, Serkant Ali (Dogus Author) -- Yıldız, Süleyman Cenk (Dogus Author) -- Conference full title: 2010 IEEE Nuclear Science Symposium conference record (NSS/MIC 2010) : [including the 2010 IEEE Nuclear Science Symposium, Medical Imaging Conference, and the 17th International Workshop on Room-Temperature Semiconductor X-Ray and Gamma-Ray Detectors (RTSD)]; Knoxville, Tennessee, USA, 30 October - 6 November 2010 The CERN Axion Solar Telescope (CAST) is searching for solar axions which could be produced in the core of the Sun via the so-called Primakoff effect. Not only would these hypothetical particles solve the strong CP problem, but they are also one of the favored candidates for dark matter. In order to look for axions originating from the Sun, CAST uses a decommissioned LHC prototype magnet. In its 10 m long magnetic field region of 9 Tesla, axions could be reconverted into X-ray photons. Different X-ray detectors are installed on both ends of the magnet, which is mounted on a structure built to follow the Sun during sunrise and sunset for a total of about 3 hours per day. The analysis of the data acquired during the first phase of the experiment with vacuum in the magnetic field region yielded the most restrictive experimental upper limit on the axion-to-photon coupling constant for axion masses up to about 0.02 eV. In order to extend the sensitivity of the experiment to a wider mass range, the CAST experiment continues its search for axions with helium in the magnet bores. In this way it is possible to restore coherence of conversion for larger masses. Changing the pressure of the helium gas enables the experiment to scan different axion masses in the range of up to about 1.2 eV. Especially at high pressures, a precise knowledge of the gas density distribution is crucial to obtain accurate results. In the first part of this second phase of CAST, 4He was used and the axion mass region was extended up to 0.39 eV, a part of phase space favored by axion models. In CAST's ongoing 3He phase the studied mass range is now being extended further. In this contribution the final results of CAST's 4He phase will be presented and the current status of the 3He run will be given. This includes latest results as well as prospects of future axion experiments. Nucl. Plasma Sci. Soc. Inst. Electr. Electron. Eng. (NPSS)

We report on simultaneous NuSTAR and XMM-Newton observations of the magnetar 1E 1048.1$-$5937 obtained in July 2013, along with Rossi X-ray Timing Explorer (RXTE) data for the same source obtained from December 2002 through March 2012. The NuSTAR data provide a clear detection of this magnetar's persistent emission up to 20 keV. We detect a previously unreported small secondary peak in the average pulse profile in the 7-10 keV band, which grows to an amplitude comparable to that of the main peak in the 10--20 keV band. We show using RXTE data that this secondary peak is likely transient. We find that the pulsed fraction increases with energy from a value of $\sim$0.55 at $\sim$2 keV to a value of $\sim$0.75 near 8 keV but shows evidence for decreasing at higher energies. After filtering out multiple bright X-ray bursts during the observation, we find that the phase-averaged spectrum from combined NuSTAR and XMM data is well described by an absorbed double blackbody plus power-law model, with no evidence for the spectral turn-up near $\sim$10 keV as has been seen in some other magnetars. Our data allow us to rule out a spectral turn-up similar to those seen in magnetars 4U 0142+61 and 1E 2259+586 of $\Delta\Gamma >= 2$, where $\Delta\Gamma$ is the difference between the soft-band and hard-band photon indexes. The absence of a significant spectral turn-up is consistent with what has been observed from a particularly active subset of magnetars having high spin-inferred magnetic fields, and with previously reported trends suggesting the degree of spectral turn-up is correlated with spin-down rate and/or spin-inferred magnetic field strength., Comment: 14 pages, 8 figures. Accepted to APJ

In this work we present a search for (solar) chameleons with the CERN Axion Solar Telescope (CAST). This novel experimental technique, in the field of dark energy research, exploits both the chameleon coupling to matter ($\beta_{\rm m}$) and to photons ($\beta_{\gamma}$) via the Primakoff effect. By reducing the X-ray detection energy threshold used for axions from 1$\,$keV to 400$\,$eV CAST became sensitive to the converted solar chameleon spectrum which peaks around 600$\,$eV. Even though we have not observed any excess above background, we can provide a 95% C.L. limit for the coupling strength of chameleons to photons of $\beta_{\gamma}\!\lesssim\!10^{11}$ for $1, Comment: 8 pages, 12 figures

Solar axions could be converted into x-rays inside the strong magnetic field of an axion helioscope, triggering the detection of this elusive particle. Low background x-ray detectors are an essential component for the sensitivity of these searches. We report on the latest developments of the Micromegas detectors for the CERN Axion Solar Telescope (CAST), including technological pathfinder activities for the future International Axion Observatory (IAXO). The use of low background techniques and the application of discrimination algorithms based on the high granularity of the readout have led to background levels below 10$^{-6}$ counts/keV/cm$^2$/s, more than a factor 100 lower than the first generation of Micromegas detectors. The best levels achieved at the Canfranc Underground Laboratory (LSC) are as low as 10$^{-7}$ counts/keV/cm$^2$/s, showing good prospects for the application of this technology in IAXO. The current background model, based on underground and surface measurements, is presented, as well as the strategies to further reduce the background level. Finally, we will describe the R&D paths to achieve sub-keV energy thresholds, which could broaden the physics case of axion helioscopes., 6 pages, 3 figures, Large TPC Conference 2014, Paris

The Kirkpatrick Baez Optic (KBO) diagnostic designed for the National Ignition Facility (NIF) requires very precise alignment between four pairs of mirrors that make up four x-ray imaging channels. Furthermore, the overlapping image axis of the four pairs must be aligned to within a 50 μm radius of the NIF target center. In order to achieve this the diagnostic utilizes a telescoping snout that when extended, locates the mirrors at the end of a Diagnostic Load Package (DLP), cantilevered more than three meters out from its bolted connection points. Discussed in this paper are the structural challenges and the mechanical design solutions that were implemented to achieve the ±50 μm pointing accuracy. During an Inertial Confinement Fusion (ICF) experiment, the KBO diagnostic will be 117 mm away from the extremely high impulse, target implosion shock wave, which requires a unique approach to protecting the sensitive optics which will also be discussed.

In non-hadronic axion models, which have a tree-level axion-electron interaction, the Sun produces a strong axion flux by bremsstrahlung, Compton scattering, and axio-recombination, the "BCA processes." Based on a new calculation of this flux, including for the first time axio-recombination, we derive limits on the axion-electron Yukawa coupling g_ae and axion-photon interaction strength g_ag using the CAST phase-I data (vacuum phase). For m_a < 10 meV/c2 we find g_ag x g_ae< 8.1 x 10^-23 GeV^-1 at 95% CL. We stress that a next-generation axion helioscope such as the proposed IAXO could push this sensitivity into a range beyond stellar energy-loss limits and test the hypothesis that white-dwarf cooling is dominated by axion emission. In non-hadronic axion models, which have a tree-level axion-electron interaction, the Sun produces a strong axion flux by bremsstrahlung, Compton scattering, and axio-recombination, the ``BCA processes.'' Based on a new calculation of this flux, including for the first time axio-recombination, we derive limits on the axion-electron Yukawa coupling gae and axion-photon interaction strength ga(γ) using the CAST phase-I data (vacuum phase). For malesssim10 meV/c(2) we find ga(γ) gae

The CERN Axion Solar Telescope (CAST) has extended its search for solar axions by using (3)He as a buffer gas. At T=1.8 K this allows for larger pressure settings and hence sensitivity to higher axion masses than our previous measurements with (4)He. With about 1 h of data taking at each of 252 different pressure settings we have scanned the axion mass range 0.39 eV≲m(a)≲0.64 eV. From the absence of excess x rays when the magnet was pointing to the Sun we set a typical upper limit on the axion-photon coupling of g(aγ)≲2.3×10(-10) GeV(-1) at 95% C.L., the exact value depending on the pressure setting. Kim-Shifman-Vainshtein-Zakharov axions are excluded at the upper end of our mass range, the first time ever for any solar axion search. In the future we will extend our search to m(a)≲1.15 eV, comfortably overlapping with cosmological hot dark matter bounds.

The Static X-ray Imager (SXI) at the National Ignition Facility (NIF) is a pinhole camera using a CCD detector to obtain images of hohlraum wall x-ray drive illumination patterns seen through the laser entrance hole (LEH). Carefully chosen filters combined with the CCD response allows recording images in the x-ray range of 3 to 5 keV with 60 {micro}m spatial resolution. The routines used to obtain the apparent size of the backlit LEH, and the location and intensity of beam spots are discussed and compared to predictions. A new soft x-ray channel centered at 870 eV (near the x-ray peak of a 300 eV temperature ignition hohlraum) is discussed.

The Linac Coherent Light Source (LCLS) is a 0.15-1.5 nm wavelength free-electron laser (FEL) being constructed at the Stanford Linear Accelerator Center (SLAC) by a multi-institution consortium, including Lawrence Livermore National Laboratory (LLNL). One of LLNL's responsibilities involves the design and construction of two grazing-incidence mirror systems whose primary intent is to reduce radiation levels in the experimental halls by separating the FEL beam from unwanted high-energy photons. This paper discusses one of these systems, the Soft X-ray Offset Mirror System (SOMS) that will operate in the wavelength range 0.62-1.5 nm (0.827-2.00 keV). The unusual properties of the FEL beam translate to stringent specifications in terms of stability, material choice and mirror properties. It also precludes using approaches previously developed for synchrotron light sources. This situation has led us to a unique mirror design, consisting of a reflective boron carbide layer deposited on a silicon substrate. In the first part of this paper, we discuss the basic system requirements for the SOMS and motivate the need for these novel reflective elements. In the second part of this paper, we discuss the development work we have performed, including simulation and experimental verification of the boron carbide coating properties, and the expected performance of the final system.

Animal models, especially transgenic and knock-out mice, now affect research in every area of biomedical science and are available for a diverse range of human conditions + Bernstein and Breitman, 1989 -. The emergence of transgenic animal technology as a key component along the entire research path, ranging from fundamental investigations to pharmacological development, requires high-resolution techniques suitable for noninvasive imaging of small animals. While magnetic resonance imaging (MRI), magnetic resonance spectroscopy, and CT provide spatial resolution in the range 25-50 µm, these techniques are best-suited for anatomical or metabolite concentration studies. Noninvasive metabolic and functional assessments are best performed using positron emission tomography (PET)and single-photon computed tomography (SPECT).

Current multilayer designs for 10-80 keV hard X-ray telescope missions have focused primarily on the proven properties of W and Pt based multilayer coatings. Recently a number of new material combinations and coating capabilities have emerged which allows for more elaborate designs that can further extend the energy band of current mission designs as well as avoid some of the unwanted absorption edge effects in the effective area near potentially important line emission energies. These new design possibilities are investigated for current hard X-ray mission designs. The new material combinations to be considered are recently proven capabilities of enhanced NiV/C coatings and NiV/SiC coatings in conjuction with the well-established W based coatings.

A low background Micromegas detector has been operating on the CAST experiment at CERN for the search of solar axions during the first phase of the experiment (2002-2004). The detector operated efficiently and achieved a very low level of background rejection ($5\times 10^{-5}$ counts keV$^{-1}$cm$^{-2}$s$^{-1}$) thanks to its good spatial and energy resolution as well as the low radioactivity materials used in the construction of the detector. For the second phase of the experiment (2005-2007), the detector will be upgraded by adding a shielding and including focusing optics. These improvements should allow for a background rejection better than two orders of magnitude., 6 pages, 3 figures To appear on the proceedings of the 9th ICATPP Conference on AStroparticle, Particle, Space Physics, Detectors and Medical Physics Applications

Significant effort is currently being devoted to the development of noninvasive imaging systems that allow in vivo assessment of biological and biomolecular interactions in mice and other small animals. Ideally, one would like to discern these functional and metabolic relationships with in vivo radionuclide imaging at spatial resolutions approaching those that can be obtained using the anatomical imaging techniques ( i.e.

A Wolter X-ray optic was the central component of the microscope envisioned to fulfill the imaging requirements of the Characterization SI. After encountering many difficulties and delays, an optic was finally produced that, unfortunately, only partially met its specifications. With the SI halted, and efforts underway to reformulate a LDRD program to support fabrication of X-ray optics, it is useful to examine the previous effort and compile a list of lessons learned during the research.

Current pinhole x ray imaging at the National Ignition Facility (NIF) is limited in resolution and signal throughput to the detector for Inertial Confinement Fusion applications, due to the viable range of pinhole sizes (10–25 μm) that can be deployed. A higher resolution and throughput diagnostic is in development using a Kirkpatrick-Baez microscope system (KBM). The system will achieve

Deformable mirrors (DMs) have been successfully used in astronomical adaptive optics at near-infrared wavelengths, greatly reducing atmospheric-induced aberrations [1]. Extending this capability to the soft and hard x-ray regime is now required in order to take full advantage of the beam quality characteristic of new generation synchrotron facilities and X-ray Free Electron Lasers (XFELs). Achieving this goal challenges both current mirror manufacturing techniques and physical optics modeling. The Lawrence Livermore National Laboratory (LLNL) is currently developing an x-ray DM to correct wavefront aberrations introduced along the beam path of a typical x-ray beam-line [2]. To model the expected performance of such a mirror, we have also developed simulation code based on the wavefront propagation library of functions PROPER [3]. Here we present the current status of the project, including metrology done on the mirror substrate. Additionally we report on results from our wavefront simulation code, which have proven very useful in predicting technical aspects of mirror deployment at a typical x-ray facility.

We present Chandra X-ray Observatory imaging observations of the young Galactic supernova remnant G11.2-0.3. The image shows that the previously known young 65-ms X-ray pulsar is at position (J2000) RA 18h 11m 29.22s, DEC -19o 25' 27.''6, with 1 sigma error radius 0.''6. This is within 8'' of the geometric center of the shell. This provides strong confirming evidence that the system is younger, by a factor of ~12, than the characteristic age of the pulsar. The age discrepancy suggests that pulsar characteristic ages can be poor age estimators for young pulsars. Assuming conventional spin down with constant magnetic field and braking index, the most likely explanation for the age discrepancy in G11.2-0.3 is that the pulsar was born with a spin period of ~62 ms. The Chandra image also reveals, for the first time, the morphology of the pulsar wind nebula. The elongated hard-X-ray structure can be interpreted as either a jet or a Crab-like torus seen edge on. This adds to the growing list of highly aspherical pulsar wind nebulae and argues that such structures are common around young pulsars., 16 pages, 3 figures, Accepted for publication in ApJ. For a full resolution version of Fig 1, see http://www.physics.mcgill.ca/~vkaspi/G11.2-0.3/f1.eps

We have examined several archivalASCAobservations of Galactic radio pulsars, including PSRs B1046–58 and B1610–50. X-ray emission is detected from PSR B1046–58 with a significance of ∼5σ. We find no evidence for pulsations. We argue that the emission is from a spatially unresolved synchrotron nebula powered by the pulsar. The location of the X-ray counterpart within the 95% position error ellipse of the gamma-ray source 3EG J1048–5840 strengthens the claim of Kaspi et al. (2000) that PSR B1046–58 emitϒ-rays. X-ray emission from PSR B1610–50 is not detected. We use the X-ray luminosity upper limit to constrain the pulsar’s velocity ≲ 200km s−1, arguing against an association with the nearby supernova remnant Kes 32. Our results for these radio pulsars contradict previous reports of detections of large (tens of arc minutes) associated synchrotron nebulae.

The Micromegas technology can be used to construct very powerful detectors for low background, low energy measurements. A Micromegas X-ray detector has been used to search for solar axions in the CAST experiment at CERN. The detector has an active area of 7 cm × 7 cm, a very good x-y position, and a good energy resolution. It is built using low radioactivity materials and it is capable of low energy X-ray measurements of a few hundred eV. Despite the lack of external shielding the obtained background level is below 5 × 105 counts/keV/cm2/s. The detector is being upgraded with a reduced active area Micromegas module, a focusing X-Ray telescope and shielding, which are expected to further reduce the background by about two orders of magnitude.