Search

The removal of trivalent iron and aluminum was studied from synthetic Li-ion battery leach solution by phosphate and hydroxide precipitation (pH 2.5-4.25, t = 3 h, T = 60 °C). Phosphate precipitation exhibited both crystal nucleation initiation (pH 2 vs. pH 3) as well as complete (~ 99%) Fe and Al removal at lower pH compared to hydroxide precipitation (pH 3 vs. 3.5). The precipitation time of phosphate was shorter (40 min) than that of hydroxide precipitation (80 min). At pH 4 the loss of valuable metals (Li, Ni, Co) in the precipitate was negligible in the phosphate cake, whereas in the hydroxide process the co-precipitation was 4-5% for Li, Ni and Co. The filtration rate of phosphate precipitate was shown to be significantly faster. The presence of fluoride did not have any notable effect on phosphate precipitation, whereas in hydroxide precipitation, it potentially had a negative effect on aluminum extraction., (© 2023. The Author(s).)

In this study, we propose a full gamma-valerolactone (GVL) organosolv biorefinery concept including the utilization of all pulping streams, solvent recovery, and preliminary material and energy balances. GVL is a renewable and non-toxic solvent that fractionates woody biomass. The silver birch chips were pulped (45-65 wt% GVL, 150 °C, 2 h) under a series of acid-catalyzed conditions (5-12 kg H 2 SO 4 /t), and the fully bleached pulp was spun into fibers by the IONCELL® process and knitted into the fabric. The dissolved lignin was precipitated by water from spent liquor (1:1) and processed into polyhydroxyurethane. Most of the dissolved hemicelluloses were in the form of xylose, therefore, the crystallization efficiency of xylose from spent liquor in the presence of residual GVL was studied. The GVL recovery rate in the lab column was 66%, however by increasing the number of equilibrium stages, 99% recovery could be achieved., Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper, (© 2023 The Authors.)

The increase in volume and variety of pharmaceuticals found in natural water bodies has become an increasingly serious environmental problem. The implementation of cold plasma technology, specifically gas-phase pulsed corona discharge (PCD), for sulfamethizole abatement was studied in the present work. It was observed that sulfamethizole is easily oxidized by PCD. The flow rate and pH of the solution have no significant effect on the oxidation. Treatment at low pulse repetition frequency is preferable from the energy efficiency point of view but is more time-consuming. The maximum energy efficiency was around 120 g/kWh at half-life and around 50 g/kWh at the end of the treatment. Increasing the solution temperature from room temperature to 50 °C led to a significant reaction retardation of the process and decrease in energy efficiency. The pseudo-first order reaction rate constant (k 1 ) grows with increase in pulse repetition frequency and does not depend on pH. By contrast, decreasing frequency leads to a reduction of the second order reaction rate constant (k 2 ). At elevated temperature of 50 °C, the k 1 , k 2 values decrease 2 and 2.9 times at 50 pps and 500 pps respectively. Lower temperature of 10 °C had no effect on oxidation efficiency compared with room temperature.

Luminescent materials have many interesting applications, but it remains difficult to control the luminescence of organic materials and in particular to retain the same luminescence in solution and in the solid state, a property of interest for various imaging applications. In the present work, the fluorescent properties of the salt of 2,6-diaminopyridinium with dihydrogen phosphate have been explored. As a result of proton transfer from phosphoric acid to the pyridine nitrogen and the stabilizing effect of the two primary amines at the positions ortho to the pyridine nitrogen, the band gap between the HOMO and the LUMO is considerably diminished in comparison with that in 2,6-diaminopyridine. This is confirmed by a red shift in its absorption spectrum. Because protonation is retained in aqueous solution, the dissolved 2,6-diaminopyridinium dihydrogen phosphate salt retains a similar fluorescent spectrum as in the solid state. The crystals have been studied by single-crystal X-ray diffraction; FTIR, Raman, UV-vis-NIR, and luminescence spectroscopy; HOMO-LUMO calculations using DFT; and thermal analysis. The compound provides an example of a supramolecular motif that controls the crystal structure and the luminescence properties. In addition, the crystal exhibits negligible thermal expansion over a temperature interval of 150 °C. In short, 2,6-diaminopyridinium dihydrogen phosphate is an interesting compound for the design of luminescent devices.