Search

Expanding the optical absorption range of photocatalysts is still a key endeavor in graphitic carbon nitride (g-C3N4) studies. Here, we report on a novel thiophene group extending the optical property, which is assigned to n-π* electronic transitions involving the two lone pairs on sulfur (TLPS). The as-prepared samples, denoted as CN-ThAx (where x indicates the amount of ThA added, mg), showed an additional absorption above 500 nm as compared to pristine g-C3N4. Further, the thiophene group enhanced charge carrier separation to suppress e−/h+ pair recombination. The experimental results suggest that the thiophene group can obstruct the polymerization of melem to generate a large plane, thus exposing the lone electron pairs on the sulfur. The photocatalytic activity was evaluated in the decomposition of bisphenol A and H2 evolution. Compared with g-C3N4, the optimized CN-ThA30 sample led to a 6.6- and 2-fold enhancement of the degradation and H2 generation rates, respectively. The CN-ThA30 sample allowed for synchronous H2 production and BPA decomposition.

A novel 3D PANI/MgIn2S4 nanoflower photocatalyst was synthesized for the wastewater treatment and energy conversion. In all composites, 1% 3D PANI/MgIn2S4 nanoflower composite exhibits the top-flight photocatalytic activity, which can be nearly 100% reduction of Cr (VI) after 30 min and nearly 97.0% of methyl orange (MO) is degraded in 50 min. At the same time, it was proved that the Cr (VI) was completely reduced by liquid ultraviolet and XPS. The as-prepared 3D PANI/MgIn2S4 nanoflower composites showed a significantly increased photocatalytic performance for hydrogen production under visible light irradiation. The photocatalytic mechanism illustrates that the introduction of polyaniline can prominently enhance the light absorption and promote effective separation of electron-hole pairs of the composites. PL spectrum and Transient photocurrent response show excellent photoinduced charge separation efficiency possess in 3D PANI/MgIn2S4 nanoflower. Electron spin response (ESR) technique and active species trapping experiments confirmed that e−, O2 and O2− played a very important role in the process of photoreduction of Cr (VI) and h+ and O2− were the principal active groups participated in photo-degradation of methyl orange (MO). In addition, the degradation process is accompanied by the generation of singlet oxygen (1O2) and hydrogen peroxide (H2O2), suggesting that these reactive oxygen species play a cardinal part in the photodegradation mechanism. The cycling and stable performance of 3D PANI/MgIn2S4 nanoflower also shows excellent photocatalytic effect. Such 3D PANI/MgIn2S4 nanoflower composite present a cracking strategy to enhance the photoactivity of the catalysts for wastewater treatment.

It is an urgent matter to eliminate antibiotics in waste water, due to the rapid emergence of antibiotic resistance. The search for low cost, high activity and stable novel photocatalysts has attracted great interest. Herein, we demonstrated the rational construction of CNT/LaVO4 nanostructures for efficient antibiotic photodegradation by a one-step hydrothermal method. The phase structures, chemical compositions, morphologies, and optical properties of the prepared samples were investigated via various characterization techniques. The optimized CNT/LaVO4 nanostructures exhibited efficient photodegradation activity with remarkable stability. The 0.1% CNT/LaVO4 showed the highest tetracycline degradation rate, which is 2 times that of pure LaVO4. Photoluminescence (PL), transient photocurrent response and electrochemical impedance spectroscopy (EIS) together verified that this design successfully expedites the separation and transfer of photogenerated charge carriers. Subsequently, by the electron spin resonance (ESR) spin-trap technique, free radical trapping experiments and mass spectrometry analysis (MS), the active species, intermediate product, photodegradation pathway and reaction mechanism during the photocatalytic process were identified. The antibacterial results showed that the degrading products have lower toxicity. The CNT/LaVO4 composite is a potential photocatalyst for improving the water quality.

Abundant active oxygen free radicals could efficiently remove refractory organic pollutants. In previous research, the original carbon nitride can form more hydrogen peroxide, however, owing to the limitation of its band structure, the original carbon nitride cannot decompose the hydrogen peroxide to generate more active oxygen free radicals. Herein, this work reports a simple bottom-up synthesis method, which synthesize a broad-spectrum-response carbon nitride (CN-CA) with oxygen-linked band and porous defect structure, while adjusting the band structure, and the introduction of the oxygen-linked band structure can also decompose the hydrogen peroxide produced by the original carbon nitride to form more active oxygen free radicals. Instrumental characterization and analysis of experimental results revealed the important role of oxygen-linked band and porous defects in adjusting the CN-CA energy band structure and improving its visible light absorption. The optimal CN-CA displays an outstanding photocatalytic degradation ability, that degradation rate of bisphenol A (BPA) reaches 99.8% within 150 min, the reaction rate constant of which is 6.77 times higher than that of pure g-C

Here, we successfully synthesized a brown carbon nitride (CY-C3N4) co-modified with oxygen bridge and porous defects via a universal acylation method. Excitingly, density functional theory (DFT) calculation shows that the introduction of oxygen bridges in the calcination polymerization process can adjust the electronic structure and energy band position of the new material. Further, the results of elemental analysis and X-ray photoemission spectroscopy test indicate that the oxygen bridge structure was successfully introduced into the skeleton of carbon nitride. The results show that 0.1CY-C3N4 can remove bisphenol A (BPA) and 2-mercaptobenzothiazole (MBT) with a removal rate of approximately 99% in 90 min and 20 min, respectively. Its degradation rate is 17.94 times and 3.85 times faster than that the original carbon nitride, respectively. Further, through HPLC-MS analysis, the intermediate products of the reaction process were analyzed in depth to propose a possible photocatalytic degradation route. Free radical capturing test and ESR spectroscopy indicate that the formative hydroxyl radical ( OH), superoxide radical ( O2–), singlet oxygen (1O2) and hole (h+) all play a key role in the photodegradation. This study provides a new way to synthesize brown carbon nitrides with oxygen bridges and porous defects for environmental applications.

A high-performance photocatalyst should be superior not only in light absorption and charge transfer but also surface catalytic reaction. Here we report a green and simple strategy for evenly decorating Ag3PO4 particles using magnetic NiFe2O4 nanoparticles (NPs). The NiFe2O4 NPs could act as a magnetic support material for recycling the photocatalysts, as well as in situ catalytically decompose the H2O2 produced on the surface of Ag3PO4 into O2 − and OH radicals via a photo-Fenton process. The catalytic decomposition of H2O2 could produce strong oxidative capacity O2 − and OH radicals for the organic pollutants degradation and reduce host semiconductor holes ( h + ( A g 3 P O 4 ) ) consumption by these produced H2O2. Thus, the photocatalytic activities of Ag3PO4@NiFe2O4 composites were greatly enhanced. Taking the photocatalytic degradation of Methyl orange (MO), hardly decomposed colorless phenol compounds bisphenol A (BPA) and killing Escherichia coli (E. coli) as mode photocatalytic reactions, this system exhibited superior photocatalytic performances than that of pristine Ag3PO4. Electron spin resonance (ESR) spectroscopy and sacrificial-reagent incorporated photocatalytic characterizations indicated that the in situ eliminating/active decomposition of H2O2 produced by Ag3PO4 was the main reason for the enhanced photocatalytic activities.

In this work, a novel Ag 3 PO 4 @CoFe 2 O 4 composite photocatalyst was synthesized via a phosphate salts alkalinity adjustment strategy. Structure, morphology, and chemical component analysis indicated that the magnetic CoFe 2 O 4 nanoparticles (NPs) were evenly decorated on the surface of Ag 3 PO 4 particles, forming a sesame ball like structure. This unique structure ensures that the Ag 3 PO 4 @CoFe 2 O 4 composites could be totally separated by the magnet field. Photocatalytic water disinfection and organic pollutants degradation were employed to evaluate the photocatalytic performance of the as-prepared magnetic photocatalysts. The results showed that the optimum 3% Ag 3 PO 4 @CoFe 2 O 4 composite could completely inactivate 1*10 7 cfu/mL of Escherichia coli within 40 min, much faster than the pristine Ag 3 PO 4 . Meanwhile, the 3% Ag 3 PO 4 @CoFe 2 O 4 composite also showed a dramatic enhancement of photocatalytic activities for the organic pollutants degradation. The reactive oxygen species yield measurements, O 2 control photocurrents experiments, O 2 -TPD tests and photoluminescence spectra analysis indicate that the surface modification of CoFe 2 O 4 NPs could facilitate the O 2 adsorption and O O bond activation/cleavage/oxide removal and accelerate the two-electron oxygen reduction reaction for H 2 O 2 generation on the surface of Ag 3 PO 4 , and thus more ROSs were generated. In addition, due to the acceleration of electrons consumption, more holes will be left for the organic pollutants oxidation, and the photocatalytic activities as well as stability of Ag 3 PO 4 therefore have been greatly improved.

A novel visible-light-driven Ag2S/SnS2 composite photocatalyst was successfully fabricated via a simple in situ hydrothermal-ion-exchange method. The materials were systematically characterized by various techniques. XRD, XPS, and TEM analysis demonstrated the successful formation of Ag2S quantum dots on the surface of SnS2 nanoplates. The Ag2S/SnS2 composite materials exhibited increased photocatalytic activity compared to pure SnS2 for the removal of methyl orange (MO) and Cr(VI), and the 1% Ag2S/SnS2 composite material showed the best activity under visible light irradiation. Holes (h+) and superoxide radicals (˙O2−) were the major active species during the photocatalytic process. The in situ formation of Ag2S quantum dots provided an effective way to facilitate carrier transfer and separation, which is believed to be responsible for the enhanced photocatalytic performance.

Visible-light-driven magnetic CoFe2O4/Ag/Ag3VO4 photocatalysts with different weight ratios of CoFe2O4 were successfully synthesized by a hydrothermal method. The as-prepared samples have been characterized by X-ray diffraction (XRD), infrared (IR), scanning electron microscopy with an energy-dispersive X-ray spectroscope (SEM-EDS), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS), Ultraviolet–visible absorption spectroscopy (UV–vis) and vibrating sample magnetometer (VSM). The photocatalytic experiments indicate that the CoFe2O4/Ag/Ag3VO4 composites possess enhanced visible-light-driven photocatalytic activity towards the degradation of methyl orange (MO), tetracycline (TC) and killing Escherichia coli (E. coli). Electrochemical impedance spectroscopy (EIS) and photoluminescence (PL) spectra analysis indicate that the introduction of CoFe2O4 could efficiently promote the separation efficiency of photogenerated charge carriers in Ag/Ag3VO4. It is obvious that the composites show better photocatalytic activity than the pure Ag/Ag3VO4 and CoFe2O4. In particular, the 5% CoFe2O4/Ag/Ag3VO4 sample shows the highest photocatalytic activity and the degradation constant of 5% CoFe2O4/Ag/Ag3VO4 is as high as 3.4 times to that of Ag/Ag3VO4. The trapping experiments show that O2− and h+ are the major reactive species for the CoFe2O4/Ag/Ag3VO4 photocatalytic system. In addition, the as-prepared CoFe2O4/Ag/Ag3VO4 composite can be quickly separated from the solution by an extra magnetic field after the photocatalytic reaction. The cyclic test and the XRD patterns before and after cyclic test show that the CoFe2O4/Ag/Ag3VO4 hybrid materials have the stable degradation ability and crystal structure during the photodegradation process. Furthermore, it shows highly efficient visible light photocatalytic antibacterial activity. In all, the CoFe2O4/Ag/Ag3VO4 photocatalyst, as the magnetic photocatalyst and antibacterial, is promising for the further practical application of photocatalysis in wastewater treatment.

For the first time, herein this work, we have developed an effective and adaptable method to introduce defects onto the polymeric carbon nitride by simply grinding urea with urea nitrate which resulting new carbon nitride composite (UNU-C3N4) and melamine with urea nitrate which resulting new carbon nitride composite (UNM-C3N4). The UNU-C3N4 reveals high performance towards photocatalytic hydrogen production and as well as photocatalytic removal of contaminants. The results confirm that the defects enhanced the specific surface area, and improved performance of adsorbed oxygen which beneficial to generate more active radicals and more conducive sties to improve d the overall photocatalytic performance. The high N, H, and O content-enhanced electron polarization effects, by introducing the additional N, H, and O atoms into the g-C3N4 matrix, which will increase the charge transfer rate and charge separation efficiency. At the same time, the results of ESR also expression that the new type of as-prepared carbon nitride samples exhibit abundant of hydrogen radical (H ) formation, which is also assist to improve the photocatalytic hydrogen production performance. As expected, the H2 evolution rate of UNU-C3N4(or UNM-C3N4) underneath simulated solar light irradiation is 9.93 times (13.76 times) than that of U-C3N4 (urea as raw material) (or M-C3N4 (melamine as raw material)). The high hydrogen evolution rates of UNU-C3N4 and UNM-C3N4 are 830.94 and 556.79 μmol g−1 h−1 under the visible-light irradiation, respectively. Meanwhile, the synthesized UNU-C3N4 and UNM-C3N4 material are demonstrated an efficient ability to degrade pollutants. In general, this work provides a viable way to introduce defects and hydrogen bands into the structure of carbon nitride.

Abundant active oxygen free radicals could efficiently remove refractory organic pollutants. In previous research, the original carbon nitride can form more hydrogen peroxide, however, owing to the limitation of its band structure, the original carbon nitride cannot decompose the hydrogen peroxide to generate more active oxygen free radicals. Herein, this work reports a simple bottom-up synthesis method, which synthesize a broad-spectrum-response carbon nitride (CN-CA) with oxygen-linked band and porous defect structure, while adjusting the band structure, and the introduction of the oxygen-linked band structure can also decompose the hydrogen peroxide produced by the original carbon nitride to form more active oxygen free radicals. Instrumental characterization and analysis of experimental results revealed the important role of oxygen-linked band and porous defects in adjusting the CN-CA energy band structure and improving its visible light absorption. The optimal CN-CA displays an outstanding photocatalytic degradation ability, that degradation rate of bisphenol A (BPA) reaches 99.8% within 150 min, the reaction rate constant of which is 6.77 times higher than that of pure g-C3N4, as also demonstrated with 2-mercaptophenthiazole (MBT) and ciprofloxacin (CIP). Meanwhile, the excellent degradation performance under blue LED (450–462 nm) and green LED (510–520 nm) exhibits the broad-spectrum characteristics of CN-CA. The degradation pathways of BPA and MBT were analyzed via HPLC-MS. Moreover, the primary active species were detected as O2−, OH and h+ based on the trapping experiments and ESR. This research provides a new strategy for g-C3N4 modified by porous defects and oxygen-linked band structure for environmental remediation.

The increase of atmospheric carbon dioxide (CO2) concentration adversely affect several quality traits of rice grains, but the biochemical mechanism remains unclear. The objectives of this study were to determine how changes in the source-sink relationship affected rice quality. Source-sink manipulation was achieved by free-air CO2 enrichment from tillering to maturity and partial removal of spikelet at anthesis using a japonica rice cultivar Wuyunjing 23. Enrichment with CO2 decreased the head rice percentage and protein concentration of milled rice, but increased the grain chalkiness. In contrast, spikelet removal resulted in a dramatic increase in the head rice percentage and protein concentration, and much less grain chalkiness. Neither CO2 enrichment nor spikelet removal affected the starch content, but the distribution of starch granule size showed distinct treatment effects. On average, spikelet removal decreased the percentage of starch granules of diameter >10 and 5–10 µm by 23.6 and 5.6%, respectively, and increased those with a diameter of 2–5 and 5 µm) and decreasing that of

Rising tropospheric ozone concentrations in Asia affect the yield and quality of rice. This study investigated ozone-induced changes in rice grain quality in contrasting rice genotypes, and explored the associated physiological processes during the reproductive growth phase. The ozone sensitive variety Nipponbare and a breeding line (L81) containing two tolerance QTLs in Nipponbare background were exposed to 100 ppb ozone (8 h per day) or control conditions throughout their growth. Ozone affected grain chalkiness and protein concentration and composition. The percentage of chalky grains was significantly increased in Nipponbare but not in L81. Physiological measurements suggested that grain chalkiness was associated with a drop in foliar carbohydrate and nitrogen levels during grain filling, which was less pronounced in the tolerant L81. Grain total protein concentration was significantly increased in the ozone treatment, although the albumin fraction (water soluble protein) decreased. The increase in protein was more pronounced in L81, due to increases in the glutelin fraction in this genotype. Amino acids responded differently to the ozone treatment. Three essential amino acids (leucine, methionine and threonine) showed significant increases, while seven showed significant treatment by genotype interactions, mostly due to more positive responses in L81. The trend of increased grain protein was in contrast to foliar nitrogen levels, which were negatively affected by ozone. A negative correlation between grain protein and foliar nitrogen in ozone stress indicated that higher grain protein cannot be explained by a concentration effect in all tissues due to lower biomass production. Rather, ozone exposure affected the nitrogen distribution, as indicated by altered foliar activity of the enzymes involved in nitrogen metabolism, such as glutamine synthetase and glutamine-2-oxoglutarate aminotransferase. Our results demonstrate differential responses of grain quality to ozone due to the presence of tolerance QTL, and partly explain the underlying physiological processes.

In this study, a new type of high-performance visible light photocatalyst Fe2O3/Ag3VO4 was prepared by a two-step method. Fe2O3 was prepared by a solvothermal method first and then the Fe2O3/Ag3VO4 photocatalyst was synthesized with different mass ratios by a simple chemical precipitation method. Powder X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray energy dispersive spectrometry (EDS), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR), UV-vis absorption spectroscopy (in DRS mode), and electrochemical impedance spectroscopy (EIS) were applied to characterize the as-prepared samples. The results showed that the as-prepared photocatalyst was uniform in the shape of particles. Photocatalytic properties of the as-prepared samples were evaluated by degrading RhB under visible light. The results showed that 1% Fe2O3/Ag3VO4 composite presented the highest photocatalytic activity. After 60 min, 96.1% of RhB was degraded by 1% Fe2O3/Ag3VO4 composite. Finally, trapping experiments confirmed that the hole (h+) and superoxide free radical (˙O2−) were the main active species in degrading RhB.

CNT/AgI composite with the diameter smaller than 1 µm was synthesized through a solvothermal method. The CNT/AgI hybrids were characterized by XRD, SEM, XPS, UV-Vis, photocurrent and so on. The results showed that the introduced CNT can greatly reduce the particle size of AgI without using surfactant. Besides, the introduced CNT transferred the electrons efficiently and enhanced the photoactivity of the CNT/AgI hybrids in degrading RhB dye. 0.3% CNT/AgI showed the highest photocatalytic activity, which was as high as about 2 times that of pure Ag/AgI. Trapping experiments and the electron spin resonance (ESR) results suggested the reactive species in the degradation process were h+, ˙OH and ˙O2−. Furthermore, the CNT/AgI still showed high photoactivity after 4 cycle experiments. Photocatalytic antibacterial experiments showed that the 0.3% CNT/AgI had better antibacterial ability than pure Ag/AgI. The results showed that the CNT/AgI can be used as a dual functional material in water treatment of removing the organic pollutant and killing the bacterium at the same time.

Herein, a novel direct Z-scheme mechanism of red carbon nitride/rod-like LaVO4 (RCNL) photocatalyst was prepared by a simple hydrothermal method. Under visible light irradiation, the photocatalytic degradation experiments on tetracycline (TC) and naproxen (NPX) showed that 5% RCNL material presented the best photocatalytic performance, which was 3 times (TC) and 2.69 times (NPX) higher than pure LaVO4, respectively. The degradation process of tetracycline and naproxen was further analyzed by mass spectrometry, and their possible degradation routes were proposed. The antibacterial results (against Escherichia coli) showed that the degrading products have lower toxicity. The analysis of band structure, electron spin resonance technique and free radical trapping experiments showed that the h+ at valence band of RCN and e- at the conduction band of LaVO4 participated in the final photocatalytic redox process to achieve high redox ability for the rapid degradation of pollutants.

Three-dimensional (3D) hierarchical Bi 2 WO 6 –Fe 3 O 4 microspheres were successfully synthesized by a simple hydrothermal route. These microspheres with average diameters of 2–3 μm are constructed by Bi 2 WO 6 nanosheets, which are decorated by Fe 3 O 4 nanoparticles with an average diameter of 150 nm. Morphological modulation of the obtained products could be easily realized by tuning the pH value of the reaction system. The photocatalytic properties of the composites were studied with the photo-degradation of Rhodamine B (RhB) as a probe reaction. Comparing with bulk Bi 2 WO 6 (SSR-Bi 2 WO 6 ) and TiO 2 (P25), Bi 2 WO 6 –Fe 3 O 4 microspheres show improved photocatalytic activity under visible light irradiation, and can efficiently catalyze the degradation of RhB up to 98.6% within 150 min. Kinetic analysis reveals that the reaction rate constant k of Bi 2 WO 6 –Fe 3 O 4 microspheres is over three times that of P25 and nearly seven times that of SSR-Bi 2 WO 6 . The Bi 2 WO 6 –Fe 3 O 4 photocatalyst can be easily re-collected from the reaction system upon applying an external magnetic field. This kind of composite photocatalysts with easiness of separation can have potential applications in water treatment and environmental cleaning.

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has been fixed in the paper.