Search

Nitrite derivatives react with endogenous precursors forming N-nitrosamines associated with development of colorectal cancer. The present study aims to investigate the formation of N-nitrosamines in sausage during processing and in vitro gastrointestinal digestion after adding sodium nitrite and/or spinach emulsion. The INFOGEST digestion protocol was used to simulate the oral, gastric, and small intestinal phases of digestion, and sodium nitrite was added in the oral phase to mimic the input of nitrite from saliva as it has shown to affect the endogenous formation of N-nitrosamines. The results show that the addition of spinach emulsion, in spite of it being a source of nitrate, did not affect the nitrite content in either batter, sausage, or roasted sausage. The levels of N-nitrosamines increased with the added amount of sodium nitrite, and further formation of some volatile N-nitrosamines was observed during roasting and in vitro digestion. In general, N-nitrosamine levels in the intestinal phase followed the same trend as in the undigested products. The results further indicate that nitrite present in saliva may cause a significant increase in N-nitrosamine levels in the gastrointestinal tract and that bioactive components in spinach may protect against the formation of volatile N-nitrosamines both during roasting and digestion.

The exposure to selected chemical contaminants from fish has been calculated for the Danish population, both for adults (15–75 years of age) and children (4–14 years of age). The Danish mean consumption of fish is 21 g person−1 day−1 for adults and 12 g person−1 day−1 for children. Fish consumption is the main food group contributor for exposure to mercury and dioxins and dioxin-like polychlorinated biphenyls (PCDD/F and DL-PCB) for the Danish population. Comparison of the mean exposure with the TDI or TWI values shows for these substances as well as for perfluorooctane sulphuric acid (PFOS) that the exposure is below the TDI/TWI values. However, even without taking other food groups into account, PCDD/Fs and DL-PCB exposure is close to the actual TWI-value. Calculation of the Margin of Exposure (MOE) for the sum of hexabromocyclododecanes (HBCDD) and polycyclic aromatic hydrocarbons (PAHs) revealed fish consumption to be of low concern for the consumer health regarding these contaminants.

Vegetable crisps are usually perceived to be a healthier alternative to potato crisps, though thermal treatment can generate harmfull contaminants such as monochloropropanediol and glycidol fatty acid esters (MCPDEs and GEs) or acrylamide in these products. This study is among the first to investigate MCPDE, GEs, and acrylamide in commercial potato, sweet potato, parsnip, beetroot, and carrot crisps. These contaminants were found in all crisp samples on the market. The novel alternative vegetable crisps (n = 16) showed substasntial higher concentrations than in traditional potato crisps (n = 29), e.g. beetroot crisps had 7 times higher amount of 3-MCPDEs (mean 212 µg/kg), while acrylamide was 8 times higher in carrot crisps (mean 2893 µg/kg) and ∼3-4 times higher in beetroot, parsnip and sweet potato crisps. All vegetable crisp had mean values of acrylamide higher than European Commission established benchmark level for potato crisps at 750 µg/kg. Consequently, risk assessment demonstrated concerning Margin of Exposure (MoE) values for acrylamide exposure via crisp consumption in all age groups from 4-75. On the other hand, no apparent health risk was observed for dietary intake of 3-MCPDEs or GEs in crisps.

Per- and polyfluorinated alkyl substances (PFAS) can be found in food contact materials (FCMs). Therefore, migration into food occurs and contributes to human dietary exposure. Identification and minimization of possible exposure-pathways of these omnipresent and potentially toxic chemicals are important to mitigate health risks. Nonetheless, risk assessment procedures are mostly limited to considering the final PFAS concentrations in food without distinguishing the contribution of migration. Additionally, the use of food simulants during migration tests can potentially misrepresent migration results. Critically assessing reported migration behaviors of PFAS showed that the use of food simulants (especially Tenax®) in migration tests lead to an underestimation of PFAS exposure from FCMs. Reported PFAS concentrations migrated into food as well as consumption data from databases were used to estimate the dietary exposure. PFAS exclusively migrated from FCMs can considerably contribute to consumers’ dietary exposure potentially impacting human health.

Migration of per- and polyfluorinated alkyl substances (PFAS) from paper food contact materials (FCMs) can pose a consumer risk. However, risk assessment procedures typically do not consider PFAS contribution from FCMs. Moreover, migration studies are often limited to one subclass of PFAS or simplified by using food simulants (FS). To assess the risk comprehensively, migration of three PFAS subclasses (perfluorinated carboxylic acids/ sulfonic acids (PFCAs/PFSAs), polyfluoroalkyl phosphate esters (PAPs), and fluorotelomer alcohols (FTOHs)) from six FCMs were investigated to FS (50% and 20% ethanol) and food (oatmeal porridge, muffins, and tomato soup) under high-temperature conditions. Migration of PFCAs and FTOHs to all food samples was observed. Migration of PFCAs and FTOHs to 50% ethanol was significantly higher than migration to real food whilst FTOHs did not migrate into 20% ethanol. Estimated dietary PFAS exposure for children (1.06 - 5.67 ng/kgbw/day) exceeded EFSA's proposed safety threshold (0.63 ng/kgbw/day), risking consumer health.

Investigation into oven baked sweet potato and carrot fries at various temperatures and times demonstrated the in situ formation of acrylamide in an exponential manner. High levels of acrylamide were found in these food items: up to 327 µg/kg for sweet potato baked at 190 °C for 14 min, and 99 µg/kg for carrot baked at 190 °C for 13 min. Risk assessment via Margin of Exposures estimation showed that consumption of these fries might pose adverse health effects to consumers from toddlers to adults, especially when the fries were prepared at high temperatures above 175 °C and for a long time. Raw ingredient blanching and immersion in acetic acid prior to preparation have been proven to greatly reduce acrylamide formation, up to 99%. It is recommendable to apply these techniques either at industrial or domestic cooking scales to ensure minimal health risk from dietary exposure to acrylamide.

Mitigation of contaminants in industrial processing was studied for prawns (cooked and peeled), Greenland halibut (cold smoked) and Atlantic salmon (cold smoked and trimmed). Raw prawns had significantly higher cadmium, chromium, iron, selenium and zinc content in autumn than in spring, while summer levels typically were intermediate. Peeling raw prawns increased mercury concentration but reduced the concentration of all other elements including inorganic arsenic, total arsenic, chromium, zinc, selenium but especially cadmium, copper and iron (p < 0.05), however interaction between seasons and processing was observed.Non-toxic organic arsenic in raw Greenland halibut (N = 10) and salmon (N = 4) did not transform to carcinogenic inorganic arsenic during industrial cold smoking. Hence inorganic arsenic was low (

This study aimed to evaluate the impact of diets including increasing amounts (1, 2 and 4%) of an iodine-rich macroalgae, Saccharina latissima, on gene expression and fillet composition of commercial-sized rainbow trout. Liver and muscle expression of genes related to growth, iodine, oxidative stress, and lipid metabolism, and the fillet content of fatty acids, cholesterol, and vitamin D3 were assessed. The highest kelp inclusion led to lower final body weight and HSI, without significant differences in mRNA transcription of genes involved in growth (ghr1, ghr2 and igf1) or iodine metabolism (dio1, thra, and thrb). A significant downregulation of an oxidative stress marker, gpx1b2, was observed in fish fed 2% S. latissima, which might suggest the need for less endogenous antioxidants. Dietary inclusion of kelp impacted lipid metabolism, with a downregulation of fatty acid synthase, accompanied by a general decrease of fatty acids in fillet. The present study demonstrated that supplementation of diets with 1 or 2% S. latissima can be achieved without detrimental effects on rainbow trout final weight. Evidence suggest a lipid-lowering effect of diets that did not compromised fillet EPA and DHA concentrations, being 3.7 times above the recommended levels for human consumption.

Aquaculture production is demanding novel feed ingredients that reflect natural marine nutrient levels, that are also essential to humans. In this regard, biofortification through addition of iodine-rich sugar kelp in feed formulations was assessed in a 12 week rainbow trout trial. Yttrium inclusion in feed allowed determinations of apparent absorption coefficients of essential and potentially toxic elements and apparent digestibility coefficient of nutrients. E.g. apparent absorption coefficients in trouts fortified feed with 1–4% dw kelp were 67–61% As, 32–40% Cd

Acrylamide (AA) is a process-contaminant that potentially increases the risk of developing cancer in humans. AA is formed during heat treatment of starchy foods and detected in a wide range of commonly consumed products. Increased focus on risk ranking and prioritization of major causes of disease makes it relevant to estimate the impact that exposure to chemical contaminants and other hazards in food have on health. In this study, we estimated the burden of disease (BoD) caused by dietary exposure to AA, using disability adjusted life years (DALY) as health metric. We applied an exposure-based approach and proposed a model of three components: an exposure, health-outcome, and DALY-module. We estimated BoD using two approaches for estimating cancer risk based on toxicological data and two approaches for estimating DALY. In Denmark, 1.8 healthy life years per 100.000 inhabitants are lost each year due to exposure to AA through foods, as estimated by the most conservative approach. This result should be used to inform risk management decisions and for comparison with BoD of other food-borne hazards for prioritizing policies. However, our study shows that careful evaluation of methodological choices and assumptions used in BoD studies is necessary before use in policy making.

Seafood consumption is a major route for human exposure to environmental contaminants of emerging concern (CeCs). However, toxicological information about the presence of CeCs in seafood is still insufficient, especially considering the effect of cooking procedures on contaminant levels. This study is one among a few who evaluated the effect of steaming on the levels of different CeCs (toxic elements, PFCs, PAHs, musk fragrances and UV-filters) in commercially relevant seafood in Europe, and estimate the potential risks associated with its consumption for consumers. In most cases, an increase in contaminant levels was observed after steaming, though varying according to contaminant and seafood species (e.g. iAs, perfluorobutanoate, dibenzo(ah)anthracene in Mytilus edulis, HHCB-Lactone in Solea sp., 2-Ethylhexyl salicylate in Lophius piscatorius). Furthermore, the increase in some CeCs, like Pb, MeHg, iAs, Cd and carcinogenic PAHs, in seafood after steaming reveals that adverse health effects can never be excluded, regardless contaminants concentration. However, the risk of adverse effects can vary. The drastic changes induced by steaming suggest that the effect of cooking should be integrated in food risk assessment, as well as accounted in CeCs regulations and recommendations issued by food safety authorities, in order to avoid over/underestimation of risks for consumer health. info:eu-repo/semantics/acceptedVersion

Literature on formation and mitigation of N-nitrosamine (NA) and especially non-volatile NA (NVNA) in meat products is scarce and the present study is therefore a relevant contribution to the field. We found positive correlation between the levels of N-nitrosopiperidine (NPIP), N-nitrosohydroxyproline (NHPRO), N-nitrosoproline (NPRO), N-nitrosothiazolidine-4-carboxylic acid (NTCA) and N-nitroso-2-methyl-thiazolidine-4-carboxylic acid (NMTCA) and the amount of nitrite added to cooked pork sausages. The levels studied were 0, 60, 100, 150, 250 and 350mgkg−1. The levels of N-nitrosodimethylamine (NDMA) and N-nitrosopyrrolidine (NPYR) remained at or below limit of quantification. Erythorbic acid inhibited the formation of NHPRO, NPRO, NPIP and NTCA. This inhibition was for NTCA and NMTCA counteracted by addition of free iron. Ascorbyl palmitate had less inhibitory effect than erythorbic acid and a combination of the two provided no further protection. Increasing the black pepper content increased the levels of NPIP and NMTCA. Only slight effects of increased fat content and addition of tripolyphosphate were observed.

The shortage of data on non-intentionally added substances (NIAS) present in food contact material (FCM) limits the ability to ensure food safety. Recent strategies in analytical method development permit NIAS investigation by using chemical exploration, but this has not been sufficiently investigated in risk assessment context. Here, exploration is utilized and followed by risk prioritization on chemical compounds that can potentially migrate to food from two paperboard FCM samples. Concentration estimates from exploration are converted to tentative exposure assessment, while predicted chemical structures are assessed using quantitative structure-activity relationships (QSAR) models for carcinogenicity, mutagenicity, and reproductive toxicity. A selection of 60 chemical compounds from two FCMs is assessed by four risk assessors to classify compounds based on probable risk. For almost 60% of cases, the assessors classified compounds as either high priority or low priority. Unclassified compounds are due to disagreements between experts (18%) or due to a perceived lack of data (23%). Among the high priority substances are high-concentration compounds, benzophenone derivatives, and dyes. The low priority compounds contained e.g. oligomers from plasticizers and linear alkane amides. The classification scheme provides valuable information based on tentative data and is able to prioritize discovered chemical compounds for pending risk assessment.

In the framework of the FP7 ECsafeSeafood project, 62 seafood samples commercialized in Europe Union from several representative species - mackerel, tuna, salmon, seabream, cod, monkfish, crab, shrimp, octopus, perch and plaice - were analysed for residues of 21 personal care products (PCPs), including 11 UV-filters (UV-Fs) and 10 musk fragrances (musks). PCPs analysis were performed by Quick, Easy, Cheap, Effective Rugged, Safe (QuEChERS), combined with liquid-liquid extraction (LLE) or dispersive solid-phase extraction (dSPE), followed by gas chromatography-tandem mass spectrometry (GC-MS/MS). The results showed the presence in a wide range of samples of nine out of eleven UV-Fs compounds analysed, namely 2-ethylhexyl salicylate (EHS), 2-ethylhexyl,4-methoxycinnamate (EHMC), 4-methylbenzylidenecamphor (4-MBC), benzophenone-1 (BP1), benzophenone-3 (BP3), isoamyl-4-methoxycinnamate (IMC), 2,2'-dihydroxy-4,4'-dimethoxybenzophenone (DHMB), homosalate (HS), and octocrylene (OC), whereas galaxolide (HHCB), galaxolide lactone (HHCB-lactone), and tonalide (AHTN) were the most found musks. The potential risks to human health associated with the exposure to eight of the more prevalent PCPs - EHS, EHMC, 4-MBC, BP1, BP3, IMC, HHCB, and AHTN - through seafood consumption were assessed for consumers from five European countries (Belgium, Ireland, Italy, Portugal and Spain). Results showed that the human exposure to UV-Fs and musks estimated from the concentration values found in seafood and the daily consumption of concerned seafood species, were far below toxicological reference values.

Pharmaceuticals (PhACs) and endocrine disrupting compounds (EDCs) are chemicals of emerging concern that can accumulate in seafood sold in markets. These compounds may represent a risk to consumers through effects on the human reproductive system, metabolic disorders, pathogenesis of breast cancer or development of microbial resistance. Measuring their levels in highly consumed seafood is important to assess the potential risks to human health. Besides, the effect of cooking on contaminant levels is relevant to investigate. Therefore, the objectives of this research were to study the presence and levels of PhACs and EDCs in commercially available seafood in the European Union market, to investigate the effect of cooking on contaminant levels, and to evaluate the dietary exposure of humans to these compounds through seafood consumption. A sampling survey of seafood from 11 European countries was undertaken. Twelve highly consumed seafood types were analysed raw and cooked with 3 analytical methods (65 samples, 195 analysis). PhACs were mostly not detectable or below quantification limits in seafood whereas EDCs were a recurrent group of contaminants quantified in the majority of the samples. Besides, cooking by steaming significantly increased their levels in seafood from 2 to 46-fold increase. Based on occurrence and levels, bisphenol A, methylparaben and triclosan were selected for performing a human exposure assessment and health risk characterisation through seafood consumption. The results indicate that the Spanish population has the highest exposure to the selected EDCs through seafood consumption, although the exposure via seafood remained below the current toxicological reference values. info:eu-repo/semantics/acceptedVersion

Heating foods immersed in oil during frying provides many attractive sensorial attributes including taste, flavor and color. However, some toxic compounds formed during frying of potatoes such as furan and acrylamide may constitute an increased cancer risk for consumers. The objective of this work was to mitigate the furan and acrylamide formation in potato chips without increasing their oil uptake by optimizing the blanching treatment before final frying. Potato slices were blanched in order to simultaneously leach out ascorbic acid and reducing sugars, the most important precursors of furan and acrylamide generation in thermally treated starchy foods. A central composite design was implemented to optimize the temperature-time blanching conditions under which furan, acrylamide and oil content in potato chips were minimized. The optimum blanching conditions were 64 °C and 17 min in which significant reductions of furan, acrylamide and oil content (91%, 54% and 19% respectively) were reached.

Microplastics contamination of the aquatic environment is considered a growing problem. The ingestion of microplastics has been documented for a variety of aquatic animals. Studies have shown the potential of microplastics to affect the bioavailability and uptake route of sorbed co-contaminants of different nature in living organisms. Persistent organic pollutants and metals have been the co-contaminants majorly investigated in this field. The combined effect of microplastics and sorbed co-contaminants in aquatic organisms still needs to be properly understood. To address this, we have subjected zebrafish to four different feeds: A) untreated feed; B) feed supplemented with microplastics (LD-PE 125–250 µm of diameter); C) feed supplemented with 2% microplastics to which a mixture of PCBs, BFRs, PFCs and methylmercury were sorbed; and D) feed supplemented with the mixture of contaminants only. After 3 weeks of exposure fish were dissected and liver, intestine, muscular tissue and brain were extracted. After visual observation, evaluation of differential gene expression of some selected biomarker genes in liver, intestine and brain were carried out. Additionally, quantification of perfluorinated compounds in liver, brain, muscular tissue and intestine of some selected samples were performed. The feed supplemented with microplastics with sorbed contaminants produced the most evident effects especially on the liver. The results indicate that microplastics alone does not produce relevant effects on zebrafish in the experimental conditions tested; on the contrary, the combined effect of microplastics and sorbed contaminants altered significantly their organs homeostasis in a greater manner than the contaminants alone.

In fields such as food safety and environmental chemistry, ensuring safety is greatly challenged by large numbers of unknown substances occurring. Even with current state-of-the-art mass spectrometers, dealing with nonidentified substances is a very laborious process as it includes structure elucidation of a vast number of unknowns, of which only a fraction may be relevant. Here, we present an exploration and prioritization approach based on high-resolution mass spectrometry. The method uses algorithm-based precursor/product-ion correlations on quadrupole time-of-flight tandem mass spectrometry data to retrieve the most likely chemical match from a structure database. In addition, time-of-flight-only data are used to estimate analyte concentration via semiquantification. The method is demonstrated in recycled paper food contact material. Here, 585 chromatographic peaks were discovered, of which 117 were unique to the sample and could be tentatively elucidated via accurate mass, isotopic pattern, and precursor/product-ion correlations. Nearly 85% of these 117 peaks were matched with database entries, which provided varying certainty of information about the analyte structure. Semiquantitative concentration ranges of investigated compounds were between 0.7 and 1600 μg dm-2 . With these data, a subgroup of chemicals was risk-categorized and prioritized by using the most likely candidate structure(s) obtained. Prioritization based on expected health impact was possible by using the tentatively assigned data. Overall, the described method not only is a valuable chemical exploration tool for nonidentified substances but may also be used as a preliminary prioritization tool for substances expected to have the highest health impact, for example, in food contact materials.

When microplastics pollute fish habitats, it may be ingested by fish, thereby contaminating fish with sorbed contaminants. The present study investigates how combinations of halogenated contaminants and microplastics associated with feed are able to alter toxicokinetics in European seabass and affect the fish. Microplastic particles (2%) were added to the feed either with sorbed contaminants or as a mixture of clean microplastics and chemical contaminants, and compared to feed containing contaminants without microplastics. For the contaminated microplastic diet, the accumulation of polychlorinated biphenyls (PCBs) and brominated flame retardants (BFRs) in fish was significantly higher, increasing up to 40 days of accumulation and then reversing to values comparable to the other diets at the end of accumulation. The significant gene expression results of liver (cyp1a, il1β,gstα) after 40 days of exposure indicate that microplastics might indeed exacerbate the toxic effects (liver metabolism, immune system, oxidative stress) of some chemical contaminants sorbed to microplastics. Seabass quickly metabolised BDE99 to BDE47 by debromination, probably mediated by deiodinase enzymes, and unlike other contaminants, this metabolism was unaffected by the presence of microplastics. For the other PCBs and BFRs, the elimination coefficients were significantly lower in fish fed the diet with contaminants sorbed to microplastic compared to the other diets. The results indicate that microplastics affects liver detoxification and lipid distribution, both of which affect the concentration of contaminants.

open access article Food contact materials (FCM) are any type of item intended to come into contact with foods and thus represent a potential source for human exposure to chemicals. Regarding FCMs made of paper and board, information pertaining to their chemical constituents and the potential impacts on human health remains scarce, which hampers safety evaluation. We describe an effect-directed strategy to identify and characterize emerging chemicals in paper and board FCMs. Twenty FCMs were tested in eight reporter gene assays, including assays for the AR, ER, AhR, PPARγ, Nrf2 and p53, as well as mutagenicity. All FCMs exhibited activities in at least one assay. As proof-of-principle, FCM samples obtained from a sandwich wrapper and a pizza box were carried through a complete step-by-step multi-tiered approach. The pizza box exhibited ER activity, likely caused by the presence of bisphenol A, dibutyl phthalate, and benzylbutyl phthalate. The sandwich wrapper exhibited AR antagonism, likely caused by abietic acid and dehydroabietic acid. Migration studies confirmed that the active chemicals can transfer from FCMs to food simulants. In conclusion, we report an effect-directed strategy that can identify hazards posed by FCMs made from paper and board, including the identification of the chemical(s) responsible for the observed activity.

Chilean consumer preferences include foods that may contain considerable amounts of furan, a potential human carcinogen. However, there is no information regarding dietary exposure to furan in Chile. Thus, the objective of this work was to determine the Chilean exposure to dietary furan. To accomplish this objective, the furan concentration of 14 types of commercial foods processed at high temperature were analysed based on a modified headspace-GC/MS (HS-GC/MS) method in which the limits of detection for different food matrices ranged from 0.01 to 0.6 ng g(-1). In addition, a risk assessment was made with exposure estimates based on dietary data from national studies on different age groups (9-month-old babies, school children, adults and elderly people). Of the food items surveyed "American"-type coffee (espresso coffee plus hot water) obtained from automatic coffee machine (936 ng g(-1)) and low moisture starchy products like crisps and "soda"-type crackers showed the highest furan concentrations (259 and 91 ng g(-1), respectively). Furthermore, furan was also found in samples of breakfast cereals (approximately 20 ng g(-1)), jarred fruit baby foods (8.5 ng g(-1)) and orange juice (7.0 ng g(-1)). School children (aged 9-13 years) represented the highest intake of furan (about 500 ng kg(-1)(bw) day(-1)), with margins of exposure of 2479 and 2411, respectively, which points to a possible public health risk.

Three trials were conducted to determine the influence of the use of temperature control systems on physico-chemical characteristics and acrylamide formation in the domestic preparation of potatoes. French fries were pre-treated by soaking in water or acidified water, and then they were cooked using a range of home-cooking procedures. Soaking raw potatoes in acidified water (pH=3.17) before frying at a controlled temperature (180 °C) was the most efficient pretreatment for reducing acrylamide formation (76%). For the same temperature, roasted frozen par-fried potatoes contained less fat and acrylamide than similar pan-fried potatoes. Potatoes butter fried at 140 °C had an acrylamide concentration similar to that of potatoes fried in oil at 180 °C, but this value was reduced by 71% when the frying was carried out using a temperature control system. Controlling the frying temperature reduced acrylamide formation at all the temperatures studied.

Furan, a potential carcinogen, has been detected in highly consumed starchy foods, such as bread and snacks; however, research on furan generation in these food matrixes has not been undertaken, thus far. The present study explored the effect of ascorbic acid addition and cooking methods (frying and baking) over furan occurrence and its relation with the non-enzymatic browning in a wheat flour starchy food model system. Results showed that furan generation significantly increased in the presence of ascorbic acid after 7 min of heating (p < 0.05). The strongest effect was observed for baked products. Additionally, the furan content in fried products increased with the increase of the oil uptake levels. As for Maillard reactions, in general, the furan level in all samples linearly correlated with their degree of non-enzymatic browning, represented by L* and a* color parameters (e.g., wheat flour baked samples showed a R(2) of 0.88 and 0.87 for L* and a*, respectively), when the sample moisture content decreased during heating.

In this research acrylamide reduction in potato chips was investigated in relation to blanching and asparaginase immersion treatments before final frying. Potatoes slices (Verdi variety, diameter: 40 mm, thickness: 2.0 mm) were fried at 170 °C for 5 min (final moisture content of ∼2.0 g/100 g). Prior to frying, potato slices were treated in one of the following ways: (i) Rinsing in distilled water (control I); (ii) Rinsing in distilled water plus blanching in hot water at 85 °C for 3.5 min; (iii) Rinsing in distilled water plus immersion in an asparaginase solution (10000 ASNU/L) at 50 °C for 20 min; (iv) Rinsing in distilled water plus blanching in hot water at 85 °C for 3.5 min plus immersion in an asparaginase solution (10000 ASNU/L) at 50 °C for 20 min; (v) Rinsing in distilled water plus blanching in hot water at 85 °C for 3.5 min plus immersion in distilled water at 50 °C for 20 min (control II). Blanching in hot water (ii) was almost as effective as asparaginase potato immersion (iii) in order to diminish acrylamide formation in potato chips (acrylamide reduction was ∼17% of the initial acrylamide concentration). When potato slices were blanched before asparaginase immersion, the acrylamide content of the resultant potato chips was reduced considerably by almost 90%. We have demonstrated that blanching of potato slices plus asparaginase treatment is an effective combination for acrylamide mitigation during frying. It seems to be that blanching provokes changes in the microstructure of potato tissue leading to an easier and more effective diffusion of asparaginase.

Acrylamide formation in French fries was investigated in relation to blanching and asparaginase soaking treatments before final frying. Par-fried potatoes of Bintje variety were prepared by cutting strips (0.8×0.8×5cm) which were blanched at 75°C for 10min. Unblanched strips were used as the control. Control or blanched strips were then dried at 85°C for 10min and immediately partially fried at 175°C for 1min. Finally, frozen par-fried potatoes were fried at 175°C for 3min to obtain French fries. Pre-drying of raw or blanched potato strips did not generate acrylamide formation as expected. Partial frying of pre-dried control potato strips generated 370μg/kg of acrylamide and the final frying determined French fries with 2075μg/kg of acrylamide. When control potato strips were treated with a 10000 ASNU/l asparaginase solution at 40°C for 20min, the acrylamide formation in French fries was reduced by 30%. When blanched potato strips were treated in the same way, the produced French fries have 60% less acrylamide content than blanched strips without the enzyme treatment. Soaking of blanched potato strips (75°C, 10min) in an 10000 ASNU/l asparaginase solution at 40°C for 20min is an effective way to reduce acrylamide formation after frying by reducing the amount of one of its important precursors such as asparagine.

Addition of 1% aqueous rosemary extract with approximately 40 mg of gallic acid equivalents or comparable addition of rosemary oil or of dried rosemary leaves to wheat dough reduced the content of acrylamide in wheat buns by 62, 67 and 57%, respectively, compared to wheat buns without rosemary. Increasing the addition of aqueous rosemary extract to 10% did not decrease the acrylamide content further compared to the addition of a 1% extract. The spice dittany showed less effect in wheat buns compared to rosemary and even increased acrylamide formation slightly. The effect of antioxidants on acrylamide formation was confirmed by addition of 1.0 mM (but not 0.1 mM) of the green tea flavonoids epicatechin or epigallocatechin gallate to an aqueous food model. Free radicals were detected by ESR using the spin trap α-(4-Pyridyl 1-oxide)-N-tert-butylnitrone (POBN) in an aqueous model system of 0.060 M glucose and 0.060 M asparagine heated under conditions generating acrylamide, further confirming the impact of free radical intermediates in formation of acrylamide. A modest effect of the peroxides in oxidized oil on acrylamide elimination was observed pointing towards an oxidative induced polymerization of acrylamide. The impact of oxidative processes on acrylamide elimination should not be neglected, since oxidized vegetable oil seems to promote degradation of acrylamide.

Acrylamide formation and changes in color of fried potato strips was investigated in relation to frying temperature and three treatments before frying. Potato strips (0.8 × 0.8 × 5 cm) of Bintje variety were fried at 150, 170 and 190 °C until reaching moisture contents of ∼40 g water/100 g (total basis). Prior to frying, potato strips were treated in one of the following ways: (i) immersed in distilled water for 0 min (control), 60 min and 120 min; (ii) blanched in hot water at six different time–temperature combinations (50 °C for 40 and 80 min; 70 °C for 10 and 45 min; 90 °C for 3 and 10 min); (iii) immersed in a citric acid solution of 10 g/L for an hour; (iv) immersed in a sodium pyrophosphate solution of 10 g/L for an hour. Acrylamide content and color was determined in the potato strips after frying. Immersed strips in water for 120 min showed a reduction of acrylamide formation of 33%, 21% and 27% at 150, 170 and 190 °C, respectively, when they were compared against the control. Potato strips blanched at 50 °C for 80 min had the lowest acrylamide content when compared against strips blanched at different conditions and fried at the same temperature (135, 327 and 564 μm acrylamide/kg for 150, 170 and 190 °C, respectively). Potato strip immersion in citric acid solution of 10 g/L reduced much more the acrylamide formation after frying than the strip immersion in sodium pyrophosphate solution of 10 g/L (53% vs. 17%, respectively, average values for the three temperatures tested). Acrylamide formation decreased dramatically as the frying temperature decreased from 190 to 150 °C for all the pre-treatments tested. Color represented by the parameters L * and a* showed high correlations ( r 2 of 0.79 and 0.83, respectively) with French fry acrylamide content.

Microplastics, plastic particles and fragments smaller than 5mm, are ubiquitous in the marine environment. Ingestion and accumulation of microplastics have previously been demonstrated for diverse marine species ranging from zooplankton to bivalves and fish, implying the potential for microplastics to accumulate in the marine food web. In this way, microplastics can potentially impact food safety and human health. Although a few methods to quantify microplastics in biota have been described, no comparison and/or intercalibration of these techniques have been performed. Here we conducted a literature review on all available extraction and quantification methods. Two of these methods, involving wet acid destruction, were used to evaluate the presence of microplastics in field-collected mussels (Mytilus galloprovincialis) from three different "hotspot" locations in Europe (Po estuary, Italy; Tagus estuary, Portugal; Ebro estuary, Spain). An average of 0.18±0.14 total microplastics g(-1) w.w. for the Acid mix Method and 0.12±0.04 total microplastics g(-1) w.w. for the Nitric acid Method was established. Additionally, in a pilot study an average load of 0.13±0.14 total microplastics g(-1) w.w. was recorded in commercial mussels (Mytilus edulis and M. galloprovincialis) from five European countries (France, Italy, Denmark, Spain and The Netherlands). A detailed analysis and comparison of methods indicated the need for further research to develop a standardised operating protocol for microplastic quantification and monitoring.

Most of the available data on the occurrence of N -nitrosamines (NA) in processed meat products have been generated in the 1980s and 1990s and especially data on the occurrence of non-volatile NA (NVNA) are scarce. Therefore we have studied the levels of volatile nitrosamines (VNA) and NVNA in processed meat products on the Danish market ( N = 70) and for comparison also products on the Belgian market ( N = 20). The effect of heat treatment on the NA levels, in selected samples, was also studied, in order to enable an evaluation of how preparation before consumption affects the levels of NA. For the Danish products the mean levels of the VNA were generally low (≤0.8 μg kg −1 ), whereas the mean levels of the NVNA were considerably higher (≤118 μg kg −1 ). Slightly higher mean levels were indicated for the Belgian products (i.e. VNA ≤1.5 μg kg −1 and NVNA ≤270 μg kg −1 ). The sums of VNA were higher than 10 μg kg −1 for one Danish sample and two Belgian samples. Levels of up to 2000 and 4000 μg kg −1 of N -nitroso-thiazolidine-4-carboxylic acid (NTCA) an NVNA occurred in the Danish and the Belgian samples, respectively. The majority of the Danish processed meat products contain NVNA but also VNA occur. The levels of NA are comparable with those reported in previous and recent studies; however the frequency in which they are found may be lower and thereby also the mean contents. The levels of N -nitrosopiperidine (NPIP) increased by frying and baking, whereas varying impacts were observed for N- nitrosoproline (NPRO), N- nitrosodimethylamine (NDMA), N- nitrosopyrrolidine (NPYR), N- nitrosodiethylamine (NDEA) and N- nitrosomethylaniline (NMA) depending on the type of product and/or the heat treatment. The levels of the NVNA, NTCA and N -nitroso-2-methyl-thiazolidine 4-carboxylic acid (NMTCA) decreased after frying and baking.

Atmospheric day and night concentrations of particulate organic nitrates (PON) and several other air pollutants were measured in the summer 1995 over an open-land area in Denmark. The sampling of PON was evaluated comparing 24 h samples with two sets of 12 h samples. These results indicate that the observed low contribution of PON to NOy is real and not the result of an extensive loss during the sampling. Empirical relationships between the vapour pressure and chemical formula of organic compounds were established in order to evaluate the gas/particle distribution of organic nitrates. A positive correlation between the PON to NOz ratio and the inverse temperature may indicate that the organic nitrates associated with particles also may be present in the gas phase. The observed day and nighttime levels of PON were of the same magnitude, although the day to night ratio varied from 0.4 to 4.4.

Fluxes of HNO 3 and NH 3 to the sea-surface have been obtained from measurements of vertical concentration profiles. The obtained fluxes have been compared to fluxes calculated by the use of the resistance method, and the fluxes calculated from measurements based on the extrapolation of a log-linear profile were found to be an order of a magnitude higher than the fluxes obtained from the resistance method. The difference between these two calculated fluxes is explained by scavenging of the gases by sea-spray and chemical reactions. A simple model is constructed to calculate the vertical profiles for HNO 3 in the case of high chemical reactions. The high fluxes and the measured profiles are explained by the calculated profiles of HNO 3 where chemical reactions are taken into account. Since both sink/sources and horizontal inhomogeneity are influencing the NH 3 flux, it has not been possible to calculate profiles for this component by taking chemical reactions into account. DOI: 10.1034/j.1600-0889.1998.t01-1-00001.x

Observations of the concentration of several nitrogen containing compounds at five rural Scandinavian sites during March–June 1993 are reported. Total nitrate (NO3- + HNO3) and total ammonium (NH4+ + NH3) were measured by denuder and filter pack. In general the methods agree well. At all sites the particulate fraction dominated, with the largest fraction of NO3- and the lowest of NH4+ at the sites which were closest to the emission sources. The fraction of NO3- of total nitrate increased with increasing NO2 concentrations, indicating that the nighttime conversion of NO2 to NO3- is an important route of formation for NO3-. A positive correlation was found between HNO3 and O3 in June at all sites, while no correlation was found early in the spring. Model calculations were made with a lagrangian boundary layer photooxidant model for the whole period, and compared to the measured concentrations. The calculated ratio between mean observed and modelled daily maximum concentrations of ozone over the measurement period were within +/−10% at all sites. The models ability to describe the daily ozone maximum concentration was satisfactory with an average deviation of 19–22% from the observed concentrations. HNO3 was underestimated by over 50% at all sites except the one closest to the emission sources. The correlation between modelled and observed concentrations was generally best for the sites with shortest transport distance from the sources of emission.

Formic and acetic acid measured as daily averages in 1993–1994show equal and highly correlated concentrations up to 3 ppb in the summer(May–August). In the winter (October–March) the formicacid/acetic acid ratio was 0.6 and the formic acid concentrations wereusually below 1 ppb. In winter the carboxylic acids correlate withOx, NOy, SO2 and particulatesulphur. The main sources are suggested to be ozonolysis of anthropogenicalkenes and reactions between peroxyacetyl radicals and RO2radicals. In spring–summer the carboxylic acids correlate withO3, Ox, HNO3, PAN,NOy, SO2, particulate sulphur and temperature.In addition to the sources of the winter a contribution from ozonolysis ofbiogenic alkenes is likely. Quite similar formic acid/acetic acid ratios forall wind directions suggest that the source(s) are atmospheric oxidationprocesses distributed over large areas. The highest concentrations occurringfor winds from east to south and the correlation with e.g., particulatesulphur indicate chemical production in polluted air masses during longrange transport.

Surface ozone data from 25 Europeanlow-altitude sites and mountain sites located between79°N and 28°N were studied. The analysiscovered the time period March 1989–February 1993.Average summer and winter O3 concentrations inthe boundary layer over the continent gave rise togradients that were strongest in the north-west tosouth-east direction and west-east direction, respectively. WintertimeO3 ranged from 19 to 27 ppbover the continent, compared to about 32 ppb at thewestern border, while for summer the continentalO3 values ranged between 39 and 56 ppb and theoceanic mixing ratios were around 37 ppb. In the lowerfree troposphere average wintertime O3 mixingratios were around 38 ppb, with only an 8 ppbdifference between 28°N and 79°N. For summerthe average O3 levels decreased from about 55 ppbover Central Europe to 32 ppb at 79°N. Inaddition, O3 and Ox(= O3 + NO2)in polluted and clean air were compared. Theamplitudes of the seasonal ozone variations increasedin the north-west to south-east direction, while thetime of the annual maximum was shifted from spring (atthe northerly sites) to late summer (at sites inAustria and Hungary), which reflected the contributionof photochemical ozone production in the lower partsof the troposphere.

Perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA) bioaccumulate in humans and the half-life is around 4-6 years. As fish for many people is the largest source of PFOS exposure, the occurrence and the exposure of PFOS from fish was estimated. Today a significant proportion of the fish consumption is from aquaculture produce (~40% of the world’s fisheries (FAO 2012)). Hence the carryover of PFOS and PFOA from aquaculture feed to fish was studied. In 2011 and 2012 fish were collected from Danish catching areas in the Baltic Sea and the North Sea and from Danish aquaculture farms and analysed for PFOS and PFOA. The impact of chemical exposure on the cause in a feeding trial with rainbow trout (Oncorhynchus mykiss) accumulation and elimination of PFOS and PFOA was studied. PFOS was added to the fish feed at a level of 3 µg/g and PFOA at 0.5 µg/g. The fish were fed with the contaminated fish feed in an accumulation period of 12 weeks following an 8 weeks elimination period where unspiked feed were used. The feeding trials were carried out in tanks and the experiment included a control study of fish which were exposed only to unspiked feed. All feeding trials were conducted in duplicates. Fish were sampled 5 times during accumulation and 6 times during elimination. Analysis of PFOS and PFOA were performed on trout filet and liver.

Acrylamide in baked and toasted wheat and rye bread was studied in relation to levels of asparagine in flour, dough, bread and toasts. Asparagine was consumed during bread preparation resulting in reduced acrylamide content in the products. In wheat bread, 12% of the asparagine initially present in the flour (0.14 g kg(-1)) remained after yeast fermentation and baking; for rye bread, 82% of asparagine remained after sourdough fermentation and baking. Asparagine present in untoasted wheat bread had totally reacted after hard toasting. Toasted wheat and rye bread slices contained 11-161 and 27-205 microg kg(-1) acrylamide, respectively, compared to untoasted wheat and rye bread with

Reduction of acrylamide formation in potato chips was investigated in relation to frying temperature and three treatments before frying. Potato slices (Tivoli variety, diameter: 37 mm, width: 2.2 mm) were fried at 150°C, 170°C and 190°C until reaching moisture contents of ∼1.7 g water/100 g (total basis). Prior to frying, potato slices were treated in one of the following ways: (i) soaked in distilled water for 0 min (control), 40 min and 90 min; (ii) blanched in hot water at six different time–temperature combinations (50°C for 30 and 70 min; 70°C for 8 and 40 min; 90°C for 2 and 9 min); (iii) immersed in citric acid solutions of different concentrations (10 and 20 g/l) for half an hour. Glucose and asparagine concentration was determined in potato slices before frying, whereas acrylamide content was determined in the resultant fried potato chips. Glucose content decreased in ∼32% in potato slices soaked 90 min in distilled water. Soaked slices showed on average a reduction of acrylamide formation of 27%, 38% and 20% at 150°C, 170°C and 190°C, respectively, when they were compared against the control. Blanching reduced on average 76% and 68% of the glucose and asparagine content compared to the control. Potato slices blanched at 50°C for 70 min surprisingly had a very low acrylamide content (28 μm/kg) even when they were fried at 190°C. Potato immersion in citric acid solutions of 10 and 20 g/l reduced acrylamide formation by almost 70% for slices fried at 150°C. For the three pre-treatments studied, acrylamide formation increased dramatically as the frying temperature increased from 150°C to 190°C.

The presence of furan in a broad range of heat processed foods (0-6000 μg kg(-1)) has received considerable attention due to the fact that this heat induced contaminant is considered as a "possible carcinogenic compound to humans". Since a genotoxic mode of action could be associated with furan-induced tumor formation, current human exposure levels to this contaminant may indicate a risk to human health and the necessity for its mitigation. This review summarizes and focuses on the main issues of furan toxicity, human dietary exposure to furan and mechanisms of furan formation. Additionally, the role of some critical factors such as heating conditions, pH and matrix microstructure are discussed in order to propose some potential methodologies for furan mitigation in a wide range of heated foods.