Search

High harmonics generation (HHG) of coherent extreme ultraviolet (EUV) radiation enables ultrafast pump-probe spectroscopy with attosecond-scale timing resolutions. Yet beam control of generated EUV radiation remains a major challenge for handy implementation of ultrafast spectroscopy particularly for nano-micro samples. Here, we demonstrate a solid-based HHG scheme that incorporates non-collinear illumination to perform the propagation control of EUV harmonics by wavefront phase manipulation via a spatial light modulator. Further, our solid-based non-collinear HHG scheme converts EUV harmonics to Bessel beams without extra optics for beam focusing, offering a useful tool for diverse EUV applications of metrology and fabrication., Comment: 22 pages, 4 figures, 6 supplementary figures. The first two authors contributed equally to this work

Selective thin-film removal is needed in many microfabrication processes such as 3-D patterning of optoelectronic devices and localized repairing of integrated circuits. Various wet or dry etching methods are available, but laser machining is a tool of green manufacturing as it can remove thin films by ablation without use of toxic chemicals. However, laser ablation causes thermal damage on neighboring patterns and underneath substrates, hindering its extensive use with high precision and integrity. Here, using ultrashort laser pulses of sub-picosecond duration, we demonstrate an ultrafast mechanism of laser ablation that leads to selective removal of a thin metal film with minimal damage on the substrate. The ultrafast laser ablation is accomplished with the insertion of a transition metal interlayer that offers high electron-phonon coupling to trigger vaporization in a picosecond timescale. This contained form of heat transfer permits lifting off the metal thin-film layer while blocking heat conduction to the substrate. Our ultrafast scheme of selective thin film removal is analytically validated using a two-temperature model of heat transfer between electrons and phonons in material. Further, experimental verification is made using 0.2 ps laser pulses by micropatterning metal films for various applications., Comment: 19 pages, 4 figures. This manuscript has been submitted to International Journal of Precision Engineering and Manufacturing-Green Technology

Phase-coherent transfer of optical frequencies over a long distance is required for diverse photonic applications, including optical clock signal dissemination and physical constants measurement. Several demonstrations have been made successfully over fiber networks, but not much work has been done yet through the open air where atmospheric turbulence prevails. Here, via an 18 km outdoor link, we transmit multiple optical carriers that are extracted directly from a near-infrared frequency comb over a 4.2 THz spectral range in stabilization to a high-finesse cavity with a 1.5 Hz linewidth. Proof-of-concept experiments show that the comb-rooted optical carriers are transferred in parallel with collective suppression of atmospheric phase noise to -80 dBc/Hz. In addition, microwaves can also be delivered by pairing two separate optical carriers bound with inter-comb-mode coherence, e.g. a 10 GHz signal with phase noise of -105 dBc/Hz at 1 Hz offset. Further, an add-on demonstration is made on multi-channel coherent optical communications with the potential of multi-Tbps data transmission in free space., Comment: 18 pages, 5 figures

State-of-the-art experiments employ strong ultrafast optical fields to study the nonlinear response of electrons in solids on an attosecond time-scale. Notably, a recent experiment retrieved a 3rd order nonlinear susceptibility by comparing the nonlinear response induced by a strong laser field to a linear response induced by the otherwise identical weak field. In parallel, experiments have demonstrated high harmonic generation (HHG) in solids, a highly nonlinear process that until recently had only been observed in gases. The highly nonlinear nature of HHG has the potential to extract even higher order nonlinear susceptibility terms, and thereby characterize the entire response of the electronic system to strong field excitation. However, up till now, such characterization has been elusive due to a lack of direct correspondence between high harmonics and nonlinear susceptibilities. Here, we demonstrate a regime where such correspondence can be clearly made, extracting nonlinear susceptibilities (7th, 9th, and 11th) from sapphire of the same order as the measured high harmonics. The extracted high order susceptibilities show angular-resolved periodicities arising from variation in the band structure with crystal orientation. Nonlinear susceptibilities are key to ultrafast lightwave driven optoelectronics, allowing petahertz scaling manipulation of the signal. Our results open a door to multi-channel signal processing, controlled by laser polarization.

Various interference effects are known to exist in the process of high harmonic generation (HHG) both at the single atom and macroscopic levels. In particular, the quantum path difference between the long and short trajectories of electron excursion causes the HHG yield to experience interference-based temporal and spectral modulations. In solids, due to additional phenomena such as multi-band superposition and crystal symmetry dependency, the HHG mechanism appears to be more complicated than in gaseous atoms in identifying accompanying interference phenomena. Here, we first report experimental data showing intensity-dependent spectral modulation and broadening of high harmonics observed from bulk sapphire. Then, by adopting theoretical simulation, the extraordinary observation is interpreted as a result of the quantum path interference between the long and short electron/hole trajectories. Specifically, the long trajectory undergoes an intensity-dependent redshift, which coherently combines with the short trajectory to exhibit spectral splitting in an anomalous way of inverse proportion to the driving laser intensity. This quantum interference may be extended to higher harmonics with increasing the laser intensity, underpinning the potential for precise control of the phase matching and modulation even in the extreme ultraviolet and soft X-ray regime. Further, this approach may act as a novel tool for probing arbitrary crystals so as to adjust the electron dynamics of higher harmonics for attosecond spectroscopy.

We report a multi-channel optical frequency synthesizer developed to generate extremely stable continuous wave lasers directly out of the optical comb of an Er-doped fiber oscillator. Being stabilized to a high-finesse cavity with a fractional frequency stability of $3.8\times10^{-15}$ at 0.1 s, the comb-rooted synthesizer produces multiple optical frequencies of ultra-narrow linewidth of 1.0 Hz at 1 s concurrently with an output power of tens of mW per each channel. Diode-based stimulated emission by injection locking is a key mechanism that allows comb frequency modes to sprout up with sufficient power amplification but no loss of original comb frequency stability. Channel frequencies are individually selectable with a 0.1 GHz increment over the entire comb bandwidth spanning 4.25 THz around a 1550 nm center wavelength. A series of out-of-loop test results is discussed to demonstrate that the synthesizer is able to provide stable optical frequencies with the potential for advancing diverse ultra-precision applications such as optical clocks comparison, atomic line spectroscopy, photonic microwaves generation, and coherent optical telecommunications., Comment: 19 pages, 4 figures

We experimentally demonstrate the use of subwavelength optical nanoantennae to assist the gentle ablation of nanostructures directly using ultralow fluence from a Ti: sapphire oscillator through the excitation of surface plasmon waves. We show that this ablation mechanism is the same for metal and dielectric. The analytical solutions of ablation threshold are in excellent agreement with the experiment estimations. Surface plasmon assisted locally enhanced ablation at nanoscale provides a method for nanomachining, manipulation and modification the nanostructures without collateral thermal damage to the materials. It is also shown that this ablation can deposit low-density high quality thin nano film., Comment: 4 pages, 4 figures