Search

In response to escalating concerns about climate change, there is a growing imperative to prioritize the decarbonization of the telecom sector and effectively reduce its carbon emissions. This study presents a thorough techno-economic optimization framework for implementing renewable-dominated hybrid standalone systems for the base transceiver station (BTS) encapsulation telecom sector in Pakistan. It is noted that from the results obtained from 42 BTS sites overall, 21 BTS sites had a feasible combination of a photovoltaic battery system, having a diesel generator as a backup source with an average LCOE of 0.1246 USD/kWh to 0.2325 USD/kWh. Thus, seven BTS sites had an optimal combination of biomass, with photovoltaic and battery storage systems and with a varied LCOE of 0.1175 USD/kWh to 0.1318 USD/kWh. Moreover, due to the high flow of hydro water in the north region, five BTS sites presented an ideal configuration of a hydro system coupled with a photovoltaic, wind, and battery storage system, with a varied LCOE of 0.04547 USD/kWh to 0.07419 USD/kWh. Wind energy systems are dominant in the southern region; therefore, five BTS sites presented an ideal combination of a wind energy system coupled with a photovoltaic battery storage system, having DGs as backup sources for sustainability and with a varied LCOE of 0.1096 USD/kWh to 0.1294 USD/kWh. In addition, 02 BTSs had an optimal combination of photovoltaic systems coupled with hydro and wind systems, with diesel generators having a varied LCOE of 0.07618 USD/kWh to 0.04575 USD/kWh. The remaining 02 BTS sites had a feasible combination of wind–hydro-battery and diesel generator–photovoltaic–hydro-battery systems, with an LCOE of 0.7035 USD/kWh and 0.1073 USD/kWh, respectively. Finally, an environmental analysis based on carbon emissions, as well as sensitivity analyses based on different uncertainties, i.e., wind speed, solar irradiance, inflation rate, discount rate, and load demand, was performed to evaluate the behavior of the proposed systems. The optimization of these systems and comparative study findings indicate that the hybrid BTS system is the best option, better than conventional diesel-operated BTS systems in terms of cost-effectiveness, environmental friendliness, and sustainability. [ABSTRACT FROM AUTHOR]

Energy planning has become more complicated in the 21st century of sustainable development due to the inclusion of numerous standards such as techno-economic, and environmental considerations. This paper proposes multi-criteria sustainable planning (MCSP) based optimization approach for identifying DGs' optimal allocations and rating powers. The main objectives of this paper are the reduction of the network's total power loss, voltage profile improvement, energy loss saving maximization, and curtailing environmental emissions and water consumption to achieve Sustainable Development Goals (SDGs 3, 6, 7, 13, and 15) by taking the constraints into consideration. Different alternatives are evaluated across four aspects of performance indices; technical, cost-economic, environmental, and social (TEES). In terms of TEES performance evaluations, various multi-criteria decision-making (MCDM) approaches are used to determine the optimal trade-off among the available solutions. These methods are gaining wide acceptance due to their flexibility while considering all criteria and objectives concurrently. Annual energy loss saving is increased by 97.13%, voltage profile is improved to 0.9943 (p.u), and emissions are reduced by 82.45% using the proposed technique. The numerical results of the proposed MCSP approach are compared to previously published works to validate and may be used by researchers and energy planners as a planning tool for ADN schemes. [ABSTRACT FROM AUTHOR]

There are three main parts of an electric power system—power generation, transmission, and distribution. For electric companies, it is a tough challenge to reduce losses of the power system and deliver lossless and reliable power from the generating station to the consumer end. Nowadays, modern power systems are more complex due to gradually increasing loads. In the electrical power system, especially in transmission and distribution networks, there are power losses due to many reasons such as overloading of the line, long distribution lines, low power factors, corona losses, and unsuitable conductor size. The main performance factor of the power system is reliability. Reliability means continuity of the power supply without any interruptions from the generating station to the demand side. Thus, due to these power losses, there are voltage stability problems and economic losses in the electrical system. The voltage stability of the power system can be increased by improving the voltage profile. In this paper, different techniques are analyzed that include the integration of wind power, the integration of photovoltaic power, and reactive power injection by integrating FACTS devices. These techniques are applied to the IEEE 57 bus system with standard data using simulation models developed in MATLAB. Thus, the results of the analysis of these techniques have been compared with each other. [ABSTRACT FROM AUTHOR]