Search

© 2020. The Authors. River valleys have been observed on Titan at all latitudes by the Cassini-Huygens mission. Just like water on Earth, liquid methane carves into the substrate to form a complex network of rivers, particularly stunning in the images acquired near the equator by the Huygens probe. To better understand the processes at work that form these landscapes, one needs an accurate digital terrain model (DTM) of this region. The first and to date the only existing DTM of the Huygens landing site was produced by the U.S. Geological Survey (USGS) from high-resolution images acquired by the DISR (Descent Imager/Spectral Radiometer) cameras on board the Huygens probe and using the SOCET SET photogrammetric software. However, this DTM displays inconsistencies, primarily due to nonoptimal viewing geometries and to the poor quality of the original data, unsuitable for photogrammetric reconstruction. We investigate a new approach, benefiting from a recent reprocessing of the DISR images correcting both the radiometric and geometric distortions. For the DTM reconstruction, we use MicMac, a photogrammetry software based on automatic open-source shape-from-motion algorithms. To overcome challenges such as data quality and image complexity (unusual geometric configuration), we developed a specific pipeline that we detailed and documented in this article. In particular, we take advantage of geomorphic considerations to assess ambiguity on the internal calibration and the global orientation of the stereo model. Besides the novelty in this approach, the resulting DTM obtained offers the best spatial sampling of Titan's surface available and a significant improvement over the previous results.

© 2020. The Authors. River valleys have been observed on Titan at all latitudes by the Cassini-Huygens mission. Just like water on Earth, liquid methane carves into the substrate to form a complex network of rivers, particularly stunning in the images acquired near the equator by the Huygens probe. To better understand the processes at work that form these landscapes, one needs an accurate digital terrain model (DTM) of this region. The first and to date the only existing DTM of the Huygens landing site was produced by the U.S. Geological Survey (USGS) from high-resolution images acquired by the DISR (Descent Imager/Spectral Radiometer) cameras on board the Huygens probe and using the SOCET SET photogrammetric software. However, this DTM displays inconsistencies, primarily due to nonoptimal viewing geometries and to the poor quality of the original data, unsuitable for photogrammetric reconstruction. We investigate a new approach, benefiting from a recent reprocessing of the DISR images correcting both the radiometric and geometric distortions. For the DTM reconstruction, we use MicMac, a photogrammetry software based on automatic open-source shape-from-motion algorithms. To overcome challenges such as data quality and image complexity (unusual geometric configuration), we developed a specific pipeline that we detailed and documented in this article. In particular, we take advantage of geomorphic considerations to assess ambiguity on the internal calibration and the global orientation of the stereo model. Besides the novelty in this approach, the resulting DTM obtained offers the best spatial sampling of Titan's surface available and a significant improvement over the previous results.

In July 1994, the fragments of Comet Shoemaker-Levy 9 plunged into Jupiter. We present preliminary results from analysis of the Hubble Space Telescope (HST) imaging observations of Jupiter obtained before, during, and after the impacts. We discuss observations of observed phenomena ranging from plumes to waves to atmospheric evolution. We report positions of all detected impact sites (we could not locate F, P2, T, U, and V). By comparing predicted and observed impact longitudes, we estimate the actual impact time. On average, impacts occurred about 8 minutes later than predicted, although this varied from on time to more than 15 minutes late. We also present an assessment of the relative size of the disturbance for each event. HST images showed the development of several of the erupting plumes (A, E, G, and W) over a period of about 20 minutes. In three cases (A, G, and W), we may have detected the incoming bolide, although alternative explanations for pre-plume flashes are possible. For fragments E, G, and W, we detected the 10 to 15 km/sec. A fascinating and unexpected feature of the impact plumes is that they all appear to reach the same height (about 3300 km) regardless of the size of the impactor that generated them. This point greatly confounded the impact modelers, who planned to use the plume heights to estimate the diameter of the impacting comet fragments.

The exchange of mass, heat and momentum at the air:sea interface are profound influences on the terrestrial environment, affecting the intensity of hurricanes, the size of waves and lake-effect precipitation. Titan presents us with an opportunity to study these processes in a novel physical context, with a different sea, atmosphere and gravity. The MP3 instrument, under development for the proposed Discovery mission TiME (Titan Mare Explorer [1,2]) is an integrated suite of small, simple sensors that combines the function of traditional meteorology packages with liquid physical properties and depth-sounding : these latter functions follow the concept of - and indeed use spare elements from - the Huygens Surface Science Package (SSP,[3]). However, unlike Huygens’ brief and dynamic 3 hours of measurement, in TiME’s 6-Titan-day (96 Earth day) nominal mission enabled by radioisotope power, MP3 will have an unprecedented long-term measurement opportunity in one of the most evocative environments in the solar system, Titan’s sea Ligeia Mare.

The lakes and seas of Titan are a sink of products of photolysis in the atmosphere, and a crucial component in Titan's active methane cycle. In situ exploration of the seas is necessary to understand their intriguing prebiotic organic chemistry.

The exchange of mass, heat and momentum at the air:sea interface are profound influences on the terrestrial environment, affecting the intensity of hurricanes, the size of waves and lake-effect precipitation. Titan presents us with an opportunity to study these processes in a novel physical context, with a different sea, atmosphere and gravity. The MP3 instrument, under development for the proposed Discovery mission TiME (Titan Mare Explorer [1,2]) is an integrated suite of small, simple sensors that combines the function of traditional meteorology packages with liquid physical properties and depth-sounding : these latter functions follow the concept of - and indeed use spare elements from - the Huygens Surface Science Package (SSP,[3]). However, unlike Huygens’ brief and dynamic 3 hours of measurement, in TiME’s 6-Titan-day (96 Earth day) nominal mission enabled by radioisotope power, MP3 will have an unprecedented long-term measurement opportunity in one of the most evocative environments in the solar system, Titan’s sea Ligeia Mare.

The lakes and seas of Titan are a sink of products of photolysis in the atmosphere, and a crucial component in Titan's active methane cycle. In situ exploration of the seas is necessary to understand their intriguing prebiotic organic chemistry.