Search

All‐solid‐state sodium ion batteries (ASSIBs) attract growing attention as the next generation of batteries due to their high energy density, excellent safety, and the abundance of sodium resources. As a vital component of ASSIBs, chalcogenide Na‐ion solid‐state electrolytes (SSEs) have been widely studied due to their high ionic conductivity and outstanding ductility. However, due to the susceptibility to organic solvents and moisture, no chalcogenide Na‐ion SSEs membrane has been reported while only thick SSEs pellets have been investigated, which introduces abundant "dead" weight and lowers the energy density of ASSIBs. Herein, utilizing the excellent air stability of Na3SbS4, a thin (∼220 μm) Na3SbS4 membrane is prepared in air via a facile dry‐film method with polytetrafluoroethylene fibrillation, which exhibits a high ionic conductivity of 0.19 mS cm and an excellent critical current density of 0.6 mA/cm2. In summary, the chalcogenide Na‐ion SSEs membranes with high ionic conductivity and the simple preparation process could be readily adopted by pragmatic high‐performance ASSIBs. [ABSTRACT FROM AUTHOR]

Fiber‐based inorganic thermoelectric (TE) devices, owing to the small size, light‐weight, flexibility, and high TE performance, are promising for applications in flexible thermoelectrics. Unfortunately, current inorganic TE fibers are strictly constrained by limited mechanical freedom because of the undesirable tensile strain, typically limited to a value of 1.5%, posing a strong obstacle for further application in large‐scale wearable systems. Here, a superflexible Ag2Te0.6S0.4 inorganic TE fiber is demonstrated that provides a record tensile strain of 21.2%, such that it enables various complex deformations. Importantly, the TE performance of the fiber shows high stability after ≈1000 cycles of bending and releasing processes with a small bending radius of 5 mm. This allows for the integration of the inorganic TE fiber into 3D wearable fabric, yielding a normalized power density of 0.4 µW m−1 K−2 under the temperature difference of 20 K, which is approaching the high‐performance Bi2Te3‐based inorganic TE fabric and is nearly two orders of magnitude higher than the organic TE fabrics. These results highlight that the inorganic TE fiber with both superior shape‐conformable ability and high TE performance may find potential applications in wearable electronics. [ABSTRACT FROM AUTHOR]

Efficient optical modulation enables a significant improvement of optical conversion efficiency and regulation of optical response rate, showing great potential for optoelectronics applications. However, the weak interaction between photons poses a strong obstacle for manipulating photon–photon interactivity. Here, upon simultaneous excitation of 850 and 1550 nm, a fast–slow optical modulation of green up‐conversion (UC) luminescence in oxyfluoride glass ceramics containing NaYF4:Er3+ nanocrystals can be achieved. Compared with the sum of luminescence intensity excited by the two single‐wavelengths, green UC luminescence excited by simultaneous two‐wavelength presents an obvious increase by approximate six times. Interestingly, the response rate of green UC luminescence relies on the pump strategy of two‐wavelength excitation, showing as high as two times of the fast–slow response difference. The fast–slow optical modulation of green UC luminescence under two‐wavelength excitation is promising for emerging applications in all‐optical switching. [ABSTRACT FROM AUTHOR]

Chalcogenide solid‐state electrolytes (SSEs) have been receiving growing attentions due to their high ionic conductivity and suitable mechanic properties, especially the Li2S–P2S5 systems incorporated with a second glass network formers (Si, Ge, Sn, and so on) besides P. Although the ionic conductivities are generally enhanced with the second glass network formers, the comprehensive effects of different glass formers on other properties, including electrochemical, cycling, and air stability, remain elusive. To acquire deeper understanding, herein, three common but representative glass network formers (SiS2, GeS2, and SnS2) were introduced into Li2S–P2S5, and their individual effects were investigated systematically. The results of multiscale characterizations before and after lithium stripping/plating cycling confirmed that the introduction of metal cations (Ge, Sn) generally leads to worse electrochemical stability and shorter cycle life of these SSEs toward lithium metal compared with SSEs with nonmetal cation (Si) modification. However, the air stability is related to the binding energy of M–S (M = Si, Ge, Sn), which is consistent with the hard base soft acid theory. This work provides valuable understanding for designing pragmatic Li2S–P2S5–MS2‐based SSEs with high electrochemistry, cycling, and air stability. [ABSTRACT FROM AUTHOR]

Ultrafast fiber lasers, due to their short pulse duration, excellent beam quality, and high brightness, are extensively used in precision processing, biomedicine, nonlinear optics, and spectroscopy. However, great challenges still exist in improving the optical conversion efficiency in glass‐based gain media because of the high non‐radiative transition probability. Here, we demonstrate an oxyfluoride glass–ceramic (GC) fiber containing NaYF4:Yb3+ nanocrystal that enables enhanced 1064‐nm continuous‐wave laser output with an optical signal‐to‐noise ratio of 60 dB. Compared with the as‐prepared glass fiber, the optical conversion efficiency of GC fiber is improved from 24.2% to 30.0%. The improvement of laser action is mainly caused by the preferential incorporation of Yb3+ into the NaYF4 nanocrystal with low phonon energy. Using this well‐developed GC fiber, we successfully built a passively mode‐locked pulsed fiber laser that deliveries laser pulses with a pulse duration of 8.1 ps and a repetition frequency of 56.92 MHz. These results highlight that the GC strategy may provide a roadmap for the development of ultrafast fiber laser and the application of GC fibers in various optoelectronic fields. [ABSTRACT FROM AUTHOR]

Rare earth (RE) ions‐doped luminescent nanocrystals (NCs) with numerous unique advantages have attracted tremendous interest for the wide applications from science to engineering, yet suffering from the shortcoming of thermal quenching coming from surface organic ligands. We propose utilizing a facile acid‐base reaction to remove surface organic ligands introduced choosing carboxylic acids as stabilizing agent and weaken thermal quenching. The results showed that the acid‐base reaction displayed an outstanding cleaning effect. After acid‐treatment, most surface organic ligands were removed, and there was no influence on crystal structure and morphology of as‐prepared β‐NaYF4:Er3+ NCs. Meanwhile, with no surface organic ligands capping, β‐NaYF4:Er3+ NCs preferred brighter emission after thermal treatment, including up‐conversion (UC), near‐infrared (NIR), and mid‐infrared (MIR) emission. When calcined the acid‐treated β‐NaYF4:Er3+ NCs in different atmosphere, such as oxygen and reducing atmosphere (15%H2 + 85%N2), an unexpected enhancement of all emission bands in Er3+ was determined under phase transformation temperature, especially in oxygen atmosphere. Furthermore, all the fluorescence lifetimes of Er3+ also exhibited obvious extension. Our results supposed that the β‐NaYF4:Er3+ NCs have promising applications in safety ink, and the acid‐treatment by diluted hydrochloric acid is a general approach to remove deleterious organic ligands on NC surface further to weaken thermal quenching. [ABSTRACT FROM AUTHOR]

Abstract: It is well recognized that a widely wavelength‐tunable mid‐infrared (MIR) fiber laser plays an important role in the development of compact and efficient coherent sources in the MIR range. Herein, the optimizing Er/Ho ratio for enhancement of broadband tunable MIR emission covering 2.6‐2.95 μm in the Er3+/Ho3+‐codoped transparent borosilicate glass‐ceramic (GC) fibers containing NaYF4 nanocrystals under 980 nm excitation was investigated. Specifically, the obtained GC fibers with controllable crystallization and well fsd‐maintained structures were prepared by the novel melt‐in‐tube approach. Owing to the effective energy transfer between Er3+ and Ho3+ after crystallization, the 2.7 μm MIR emission was obviously enhanced and the emission region showed a notable extension from 2.6‐2.82 μm to 2.6‐2.95 μm after the addition of Ho3+. Importantly, we conducted a theoretical simulation and calculation related to the MIR laser performance, signifying that the GC fiber may be a promising candidate for MIR fiber laser. Furthermore, the melt‐in‐tube approach will provide a versatile strategy for the preparation of diverse optical functional GC fibers. [ABSTRACT FROM AUTHOR]

Optical modulation is a crucial operation in photonics for network data processing with the aim to overcome information bottleneck in terms of speed, energy consumption, dispersion and cross-talking from conventional electronic interconnection approach. However, due to the weak interactions between photons, a facile physical approach is required to efficiently manipulate photon-photon interactions. Herein, we demonstrate that transparent glass ceramics containing LaF3: Tm3+ (Er3+) nanocrystals can enable fast-slow optical modulation of blue/green up-conversion fluorescence upon two-step excitation of two-wavelengths at telecom windows (0.8-1.8 μm). We show an optical modulation of more than 1500% (800%) of the green (blue) up-conversion fluorescence intensity, and fast response of 280 μs (367 μs) as well as slow response of 5.82 ms (618 μs) in the green (blue) up-conversion fluorescence signal, respectively. The success of manipulating laser at telecom windows for fast-slow optical modulation from rear-earth single-doped glass ceramics may find application in all-optical fiber telecommunication areas. [ABSTRACT FROM AUTHOR]

Rare earth doped mid-infrared (MIR) fluorescent sources have been widely investigated due to their various potential applications in the fields of communication, chemical detecting, medical surgery and so forth. However, with emission wavelength extended to MIR, multiphonon relaxation process that strongly quenched the MIR emission is one of the greatest challenges for such practical applications. In our design, we have described a controllable gas-aided annealing strategy to modulate the phase, crystal size, morphology and fluorescent performance of a material simultaneously. Uniform and monodispersed Er3+-doped La2O2S and La2O2SO4 nanocrystals with a similar lattice structure, crystallinity, diameter and morphology have been introduced to investigate the impact of multiphonon relaxation on luminescence performance. Detailed spectroscopic evolutions in the region of MIR, near-infrared (NIR), visible upconversion (UC) and their corresponding decay times provide insight investigation into the fluorescent mechanism caused by multiphonon relaxation. A possible energy transfer model has also been established. Our results present direct observation and mechanistic investigation of fluorescent evolution in multiphonon relaxation process, which is conductive to design MIR fluorescent materials in the future. To the best of our knowledge, it is the first investigation on MIR fluorescent performance of La2O2S nanocrystals, which may find various applications in many photoelectronic fields. [ABSTRACT FROM AUTHOR]

The pursuit of compact and integrated devices has stimulated a growing demand for multifunctional sensors with rapid and accurate responses to various physical parameters, either separately or simultaneously. Fluorescent fiber sensors have the advantages of robust stability, light weight, and compact geometry, enabling real-time and noninvasive signal detection by monitoring the fluorescence parameters. Despite substantial progress in fluorescence sensors, achieving multifunctional sensing in a single optical fiber remains challenging. To solve this problem, in this study, we present a bottom-up strategy to design and fabricate thermally drawn multifunctional fiber sensors by incorporating functional nanocrystals with temperature and pressure fluorescence responses into a transparent glass matrix. To generate the desired nanocrystal-in-glass composite (NGC) fiber, the fluorescent activators, incorporated nanocrystals, glassy core materials, and cladding matrix are rationally designed. Utilizing the fluorescence intensity ratio technique, a self-calibrated fiber sensor is demonstrated, with a bi-functional response to temperature and pressure. For temperature sensing, the NGC fiber exhibits temperature-dependent near-infrared emission at temperatures up to 573 K with a maximum absolute sensitivity of 0.019 K -1 . A pressure-dependent upconversion emission is also realized in the visible spectral region, with a linear slope of -0.065. The successful demonstration of multifunctional NGC fiber sensors provides an efficient pathway for new paradigms of multifunctional sensors as well as a versatile strategy for future hybrid fibers with novel combinations of magnetic, optical, and mechanical properties., Competing Interests: The authors declare that they have no conflicts of interest in this work., (© 2022 The Authors.)

Transparent Er 3+ -doped germanotellurite glass ceramics (GCs) with variable Te/Ge ratio were prepared by controllable heat-treated process. X-ray diffraction (XRD) and transmission electron microscope (TEM) confirmed the formation of nanocrystals in glass matrix. Raman spectra were used to investigate the evolution of glass structure and photon energy. Fourier transform infrared (FTIR) spectra were introduced to characterize the change of hydroxyl group (OH - ) content. Enhanced 2.7 μm emission was achieved from Er 3+ -doped GCs upon excitation with a 980 nm laser diode (LD), and the influence of GeO 2 concentration and heat-treated temperature on the spectroscopic properties were also discussed in detail. It is found that the present Er 3+ -doped GC possesses large stimulated emission cross section at around 2.7 μm (0.85 × 10 -20  cm 2 ). The advantageous spectroscopic characteristics suggest that the obtained GC may be a promising material for mid-infrared fiber lasers.

Rare earth doped mid-infrared (MIR) fluorescent sources have been widely investigated due to their various potential applications in the fields of communication, chemical detecting, medical surgery and so forth. However, with emission wavelength extended to MIR, multiphonon relaxation process that strongly quenched the MIR emission is one of the greatest challenges for such practical applications. In our design, we have described a controllable gas-aided annealing strategy to modulate the phase, crystal size, morphology and fluorescent performance of a material simultaneously. Uniform and monodispersed Er 3+ -doped La 2 O 2 S and La 2 O 2 SO 4 nanocrystals with a similar lattice structure, crystallinity, diameter and morphology have been introduced to investigate the impact of multiphonon relaxation on luminescence performance. Detailed spectroscopic evolutions in the region of MIR, near-infrared (NIR), visible upconversion (UC) and their corresponding decay times provide insight investigation into the fluorescent mechanism caused by multiphonon relaxation. A possible energy transfer model has also been established. Our results present direct observation and mechanistic investigation of fluorescent evolution in multiphonon relaxation process, which is conductive to design MIR fluorescent materials in the future. To the best of our knowledge, it is the first investigation on MIR fluorescent performance of La 2 O 2 S nanocrystals, which may find various applications in many photoelectronic fields.