Search

The journal of evidence based dental practice 23(1S), 101794 (2023). doi:10.1016/j.jebdp.2022.101794 special issue: "Dental patient-reported outcomes 2022 Dental PROs / Edited by Fang Hua", Published by Elsevier, Amsterdam [u.a.]

Objectives This feasibility study aimed to investigate the reliability of multi-factorial age estimation based on MR data of the hand, wisdom teeth and the clavicles with reduced acquisition time. Methods The raw MR data of 34 volunteers—acquired on a 3T system and using acquisition times (TA) of 3:46 min (hand), 5:29 min (clavicles) and 10:46 min (teeth)—were retrospectively undersampled applying the commercially available CAIPIRINHA technique. Automatic and radiological age estimation methods were applied to the original image data as well as undersampled data to investigate the reliability of age estimates with decreasing acquisition time. Reliability was investigated determining standard deviation (SSD) and mean (MSD) of signed differences, intra-class correlation (ICC) and by performing Bland-Altman analysis. Results Automatic age estimation generally showed very high reliability (SSD TA of 4 min). Radiological age estimation provided highly reliable results for images of the hand (ICC ≥ 0.96) and the teeth (ICC ≥ 0.79) for short acquisition times (TA = 16 s for the hand, TA = 2:21 min for the teeth), imaging data of the clavicles allowed for moderate acceleration (TA = 1:25 min, ICC ≥ 0.71). Conclusions The results demonstrate that reliable multi-factorial age estimation based on MRI of the hand, wisdom teeth and the clavicles can be performed using images acquired with a total acquisition time of 4 min.

Journal of oral rehabilitation 48(6), 738-744 (2021). doi:10.1111/joor.13167, Published by Wiley-Blackwell, Oxford [u.a.]

Journal of prosthodontic research 64(4), 498-505 (2020). doi:10.1016/j.jpor.2020.01.005, Published by Elsevier, Amsterdam [u.a.]

Forensic age estimation has recently become an important topic due to a steady increase of cross border migration. Dental age assessment is one pillar of the forensic age estimation in living persons. Currently it is done by evaluating an orthopantomogram, which is generated using ionizing radiation. Nevertheless, the use of X-ray without medical indication is ethically questionable. Therefore, the aim of the study was to provide reference values for dental MRI to have an alternative radiation-free method for the assessment of dental age. In this cross-sectional study, 316 adolescent, male individuals were investigated. Two dentists evaluated the stage of mineralization and eruption of the third molars of the upper and lower jaws, according to the staging systems established by Demirjian and Olze. Following data analysis and the creation of reference tables, the likelihood ratios to be over specific age limits were calculated. In the mineralization evaluation mainly stages D-H were seen (range A-H); regarding eruption, all four stages (A-D) appeared. A significant difference between the teeth was only found for eruption stage A. However, the evaluation of participants who had all four third molars, showed partly different stages for the individual teeth as well for mineralization as for the eruption. Therefore, it seems to be important to include all available teeth in the age estimation. The likelihood ratios showed about 99% probability to be 18 years or older for stage H (mineralization), but only about 93% for stage D (eruption). In summary, it can be concluded that dental MRI holds promise as an alternative to conventional orthopantomogram based age assessment.

The need for forensic age estimations in living adolescents is high mainly due to migration, particularly from countries where birth dates are not reliably documented. To date, the gold standard of dental age estimation is the evaluation of the mineralization and eruption stages of the third molars using an orthopantomogram (OPG). However, the use of ionizing radiation without medical indication is ethically controversial and not permitted in many countries. Thus, the aim of this study was to investigate if dental MRI can be used for the assessment of dental age with equally good results as when using an OPG. 27 healthy volunteers (19 ♀, 8 ♂, age range 13.6-23.1 years, median 18.9 years) underwent an MRI scan of the jaw after a clinically indicated OPG. Mineralization and eruption stages of the molars were independently analyzed on OPGs and MRI by two blinded dentists according to the staging system established by Demirjian and Olze, respectively. The results of OPG and MRI were compared and inter-rater agreement was determined. The developmental stages of the 262 evaluated molars could be clearly differentiated in MRI. For both, mineralization and eruption, there was a good correlation between MRI and OPG. Overall MRI tended to yield slightly lower stages than the OPG. Inter-rater agreement was moderate for mineralization and good regarding eruption. Although a validation of these results using modality-specific reference values is needed, dental MRI seems to be suitable for a use in dental age estimation.

The MRI-based contrast-enhanced method of tooth surface digitization provides an alternative possibility for making a dental impression. It has recently been demonstrated that tooth surface digitization with an accuracy sufficient for production of dental restorations is possible using a clinical whole-body MRI scanner. However, for an in vivo application of the technique, the required high nominal resolution and signal-to- noise ratio have to be achieved within reasonable measurement times. Existing radio fre- quency (RF) volume and surface coils have not been able to fulfill this requirement. The objective of this work was to develop a dedicated RF receiver coil for contrast-enhanced dental MRI which provides a high sensitivity in the region of the whole dental arch and allows for application of the contrast media into the mouth of the patient. To achieve this goal, an intraoral dental coil design with a built-in contrast medium applicator was devel- oped and implemented. The coil was shown to enable high-resolution contrast-enhanced dental MRI in vivo. This was demonstrated on four teeth prepared for dental restorations. The average accuracy obtained for all four teeth was below 100 lm. For two of the teeth, copings were modeled based on MRI data and produced from zirconium oxide using computer-aided design and manufacturing (CAD/CAM) technology. 2008 Wiley Periodicals, Inc. Concepts Magn Reson Part B (Magn Reson Engineering) 33B: 244-251, 2008

The precision of localizing the mandibular canal prior to surgical intervention depends on the achievable resolution, whereas identification of the nerve depends on the image contrast. In our study, we developed new protocols based on gradient and spin echo sequences. The results from both sequences were quantitatively compared for their agreement to identify the most suitable approach.By limiting the field of view to one side of the mandible, three-dimensional acquisitions with TThe quantitative comparison of the segmentation resulted in an average surface distance of 0.26 ± 0.05 mm between both sequences and an interobserver difference of 0.26 ± 0.08 mm for gradient and 0.29 ± 0.07 mm for spin echo data. By repeated evaluation, a difference of 0.15 ± 0.02 mm for gradient and 0.18 ± 0.03 mm for spin echo data was observed, indicating a slightly higher variability for spin echo images.Both sequences can be used to achieve high-resolution images with good contrast and can be used for precise localization of the mandibular canal. Despite a slightly increased difference for the spin echo data, the advantage of an easy and robust setup remains.

Objectives: The objective of this study was to examine the kinematics of structures of the temporomandibular joint (TMJ) under physiological load while masticating. Methods: Radial MRI was chosen as a fast imaging method to dynamically capture the motions of the joint’s anatomy. The technique included a golden ratio-based increment angle and a sliding window reconstruction. The measurements were performed on 22 subjects with and without deformation/displacement of the intra-articular disc while they were biting on a cooled caramel toffee. Results: The reconstructed dynamic images provided sufficient information about the size and localization of the disc as well as the change of the intra-articular distance with and without loading. Conclusions: The feasibility of the golden ratio-based radial MRI technique to dynamically capture the anatomy of the TMJ under physical load was demonstrated in this initial study.

To investigate the potential influence of standard dental materials on dental MRI (dMRI) by estimating the magnetic susceptibility with the help of the MRI-based geometric distortion method and to classify the materials from the standpoint of dMRI.A series of standard dental materials was studied on a 1.5 T MRI system using spin echo and gradient echo pulse sequences and their magnetic susceptibility was estimated using the geometric method. Measurements on samples of dental materials were supported by in vivo examples obtained in dedicated dMRI procedures.The tested materials showed a range of distortion degrees. The following materials were classified as fully compatible materials that can be present even in the tooth of interest: the resin-based sealer AH Plus(®) (Dentsply, Maillefer, Germany), glass ionomer cement, gutta-percha, zirconium dioxide and composites from one of the tested manufacturers. Interestingly, composites provided by the other manufacturer caused relatively strong distortions and were therefore classified as compatible I, along with amalgam, gold alloy, gold-ceramic crowns, titanium alloy and NiTi orthodontic wires. Materials, the magnetic susceptibility of which differed from that of water by more than 200 ppm, were classified as non-compatible materials that should not be present in the patient's mouth for any dMRI applications. They included stainless steel orthodontic appliances and CoCr.A classification of the materials that complies with the standard grouping of materials according to their magnetic susceptibility was proposed and adopted for the purposes of dMRI. The proposed classification can serve as a guideline in future dMRI research.