Search

Measurements of the atmospheric carbon (C) and oxygen (O) relative to hydrogen (H) in hot Jupiters (relative to their host stars) provide insight into their formation location and subsequent orbital migration. Hot Jupiters that form beyond the major volatile (H2O/CO/CO2) ice lines and subsequently migrate post disk-dissipation are predicted have atmospheric carbon-to-oxygen ratios (C/O) near 1 and subsolar metallicities, whereas planets that migrate through the disk before dissipation are predicted to be heavily polluted by infalling O-rich icy planetesimals, resulting in C/O < 0.5 and super-solar metallicities. Previous observations of hot Jupiters have been able to provide bounded constraints on either H2O or CO, but not both for the same planet, leaving uncertain the true elemental C and O inventory and subsequent C/O and metallicity determinations. Here we report spectroscopic observations of a typical transiting hot Jupiter, WASP-77Ab. From these, we determine the atmospheric gas volume mixing ratio constraints on both H2O and CO (9.5$\times 10^{-5}$ - 1.5$\times 10^{-4}$ and 1.2$\times 10^{-4}$ - 2.6$\times 10^{-4}$, respectively). From these bounded constraints, we are able to derive the atmospheric C/H (0.35$^{+0.17}_{-0.10}$ $\times$ Solar) and O/H (0.32 $^{+0.12}_{-0.08}$ $\times$ Solar) abundances and the corresponding atmospheric carbon-to-oxygen ratio (C/O=0.59$\pm$0.08; the solar value is 0.55). The sub-solar (C+O)/H (0.33$^{+0.13}_{-0.09}$ $\times$ Solar) is suggestive of a metal-depleted atmosphere relative to what is expected for Jovian-like planets while the near solar value of C/O rules out the disk-free migration/C-rich atmosphere scenario., This is the accepted "pre-proof" version. Minor editorial reference/figure/abstract differences from published version. Published version here: https://www.nature.com/articles/s41586-021-03912-6

We present high-resolution dayside thermal emission observations of the exoplanet WASP-18b using IGRINS on Gemini South. We remove stellar and telluric signatures using standard algorithms, and we extract the planet signal via cross correlation with model spectra. We detect the atmosphere of WASP-18b at a signal-to-noise ratio (SNR) of 5.9 using a full chemistry model, measure H2O (SNR=3.3), CO (SNR=4.0), and OH (SNR=4.8) individually, and confirm previous claims of a thermal inversion layer. The three species are confidently detected (>4$\sigma$) with a Bayesian inference framework, which we also use to retrieve abundance, temperature, and velocity information. For this ultra-hot Jupiter (UHJ), thermal dissociation processes likely play an important role. Retrieving abundances constant with altitude and allowing the temperature-pressure profile to freely adjust results in a moderately super-stellar carbon to oxygen ratio (C/O=0.75^{+0.14}_{-0.17}) and metallicity ([M/H]=1.03^{+0.65}_{-1.01}). Accounting for undetectable oxygen produced by thermal dissociation leads to C/O=0.45^{+0.08}_{-0.10} and [M/H]=1.17^{+0.66}_{-1.01}. A retrieval that assumes radiative-convective-thermochemical-equilibrium and naturally accounts for thermal dissociation constrains C/O, Comment: 27 pages, 18 figures, submitted to AAS Journals. Community feedback welcome

Transmission spectra contain a wealth of information about the atmospheres of transiting exoplanets. However, large thermal and chemical gradients along the line of sight can lead to biased inferences in atmospheric retrievals. In order to determine how far from the limb plane the atmosphere still impacts the transmission spectrum, we derive a new formula to estimate the opening angle of a planet. This is the angle subtended by the atmospheric region that contributes to the observation along the line of sight, as seen from the planet centre. We benchmark our formula with a 3D Monte-Carlo radiative transfer code and we define an opening angle suitable for the interpretation of JWST observations, assuming a 10-ppm noise floor. We find that the opening angle is only a few degrees for planets cooler than ca. 500 Kelvins, while it can be as large as 25 degrees for (ultra-)hot Jupiters and 50 degrees for hot Neptunes. Compared to previous works, our more robust approach leads to smaller estimates for the opening angle across a wide range scale heights and planetary radii. Finally, we show that ultra-hot Jupiters have an opening angle that is smaller than the angle over which the planet rotates during the transit. This allows for time-resolved transmission spectroscopy observations that probe independent parts of the planetary limb during the first and second half of the transit., Comment: 10 pages, 10 figures, accepted for publication in MNRAS (fixed some references in updated version)

Ultra-hot Jupiters are tidally locked gas giants with dayside temperatures high enough to dissociate hydrogen and other molecules. Their atmospheres are vastly non-uniform in terms of chemistry, temperature and dynamics, and this makes their high-resolution transmission spectra and cross-correlation signal difficult to interpret. In this work, we use the SPARC/MITgcm global circulation model to simulate the atmosphere of the ultra-hot Jupiter WASP-76b under different conditions, such as atmospheric drag and the absence of TiO and VO. We then employ a 3D Monte-Carlo radiative transfer code, HIRES-MCRT, to self-consistently model high-resolution transmission spectra with iron (Fe I) lines at different phases during the transit. To untangle the structure of the resulting cross-correlation map, we decompose the limb of the planet into four sectors, and we analyse each of their contributions separately. Our experiments demonstrate that the cross-correlation signal of an ultra-hot Jupiter is primarily driven by its temperature structure, rotation and dynamics, while being less sensitive to the precise distribution of iron across the atmosphere. We also show that the previously published iron signal of WASP-76b can be reproduced by a model featuring iron condensation on the leading limb. Alternatively, the signal may be explained by a substantial temperature asymmetry between the trailing and leading limb, where iron condensation is not strictly required to match the data. Finally, we compute the $K_{p}-V_{sys}$ maps of the simulated WASP-76b atmospheres, and we show that rotation and dynamics can lead to multiple peaks that are displaced from zero in the planetary rest frame., Accepted for publication in MNRAS, 25 pages, 24 figures

We report on the design, construction, and commissioning of a prototype aperture masking technology implemented at the Keck OSIRIS Imager: the holographic aperture mask. Holographic aperture masking (HAM) aims at (i) increasing the throughput of sparse aperture masking (SAM) by selectively combining all subapertures across a telescope pupil in multiple interferograms using a phase mask, and (ii) adding low-resolution spectroscopic capabilities. Using liquid-crystal geometric phase patterns, we manufacture a HAM mask that uses an 11-hole SAM design as the central component and a holographic component comprising 19 different subapertures. Thanks to a multilayer liquid-crystal implementation, the mask has a diffraction efficiency higher than 96% from 1.1 to 2.5 micron. We create a pipeline that extracts monochromatic closure phases from the central component as well as multiwavelength closure phases from the holographic component. We test the performance of the HAM mask in the laboratory and on-sky. The holographic component yields 26 closure phases with spectral resolutions between R$\sim$6.5 and R$\sim$15. On April 19, 2019, we observed the binary star HDS 1507 in the Hbb filter ($\lambda_0 = 1638$ nm and $\Delta \lambda = 330$ nm) and retrieved a constant separation of 120.9 $\pm 0.5$ mas for the independent wavelength bins, which is in excellent agreement with literature values. For both the laboratory measurements and the observations of unresolved reference stars, we recorded nonzero closure phases -- a potential source of systematic error that we traced to polarization leakage of the HAM optic. We propose a future upgrade that improves the performance, reducing this effect to an acceptable level. Holographic aperture masking is a simple upgrade of SAM with increased throughput and a new capability of simultaneous low-resolution spectroscopy that provides new differential observables., Comment: 17 pages, 21 figures, 7 tables, accepted for publication in A&A

Radiative-transfer (RT) is a key component for investigating atmospheres of planetary bodies. With the 3D nature of exoplanet atmospheres being important in giving rise to their observable properties, accurate and fast 3D methods are required to be developed to meet future multi-dimensional and temporal data sets. We develop an open source GPU RT code, gCMCRT, a Monte Carlo RT forward model for general use in planetary atmosphere RT problems. We aim to automate the post-processing pipeline, starting from direct global circulation model (GCM) output to synthetic spectra. We develop albedo, emission and transmission spectra modes for 3D and 1D input structures. We include capability to use correlated-k and high-resolution opacity tables, the latter of which can be Doppler shifted inside the model. We post-process results from several GCM groups including ExoRad, SPARC/MITgcm THOR, UK Met Office UM, Exo-FMS and the Rauscher model. Users can therefore take advantage of desktop and HPC GPU computing solutions. gCMCRT is well suited for post-processing large GCM model grids produced by members of the community and for high-resolution 3D investigations., 20 pages, 9 figures, submitted to ApJ 29/10/21, revised post-reviewer comments 18/3/22

We present the easy-to-use, publicly available, Python package petitRADTRANS, built for the spectral characterization of exoplanet atmospheres. The code is fast, accurate, and versatile; it can calculate both transmission and emission spectra within a few seconds at low resolution ($\lambda/\Delta\lambda$ = 1000; correlated-k method) and high resolution ($\lambda/\Delta\lambda = 10^6$; line-by-line method), using only a few lines of input instruction. The somewhat slower correlated-k method is used at low resolution because it is more accurate than methods such as opacity sampling. Clouds can be included and treated using wavelength-dependent power law opacities, or by using optical constants of real condensates, specifying either the cloud particle size, or the atmospheric mixing and particle settling strength. Opacities of amorphous or crystalline, spherical or irregularly-shaped cloud particles are available. The line opacity database spans temperatures between 80 and 3000 K, allowing to model fluxes of objects such as terrestrial planets, super-Earths, Neptunes, or hot Jupiters, if their atmospheres are hydrogen-dominated. Higher temperature points and species will be added in the future, allowing to also model the class of ultra hot-Jupiters, with equilibrium temperatures $T_{\rm eq} \gtrsim 2000$ K. Radiative transfer results were tested by cross-verifying the low- and high-resolution implementation of petitRADTRANS, and benchmarked with the petitCODE, which itself is also benchmarked to the ATMO and Exo-REM codes. We successfully carried out test retrievals of synthetic JWST emission and transmission spectra (for the hot Jupiter TrES-4b, which has a $T_{\rm eq}$ of $\sim$ 1800 K). The code is publicly available at http://gitlab.com/mauricemolli/petitRADTRANS, and its documentation can be found at https://petitradtrans.readthedocs.io., Comment: 17 pages, 7 figures, published in A&A